process cheese used for sale

There are two identical B&R X20 CP 1483 available, length: 150mm, width: 85mm, height: 99mm, weight: 300g.

Good Condition Control type OSP P200 M X Axis Stroke 1.020 mm Y Axis Stroke 1.020 mm Z Axis Stroke 1.020 mm Axis A +30°~-120° Axis C ±360° Center-Center Distance Spindle Nose -50~970mm (vertical) / -300~720mm (horizontal) Rapid feed X-Y-Z 30 m/min ; A-C 3,600 rpm Table dimensions 800 x 800 mm Permissible weight 1.000 Kg Automatic palletizing 6 positions including 4 additional pallets Spindle speed 100 - 10,000 rpm Spindle power 22/18,5 Kw Spindle connection BT50 Tool magazine 120 positions Refrigeration through spindle 70 Bar Chip Evacuator Accessories

Bilwinco Multihead weigher, DW80-6B, upgraded to Q20 controller in 2004, 6 weighing buckets, fully overhauled. SN number 4215 Weighing range: 10 - 1,000 g, 6 weighing heads weighing container max. 1 liter useful Volume, in one service .: up to max. 80 cycles / min. Can be used to fill a vertical bagging machine or a tray sealer.

VF2SS vertical machining center :::SPECIFICATIONS::: CNC Model: Haas Tool connection: BT 40 Spindle power: 22Kw Number of spindle revolutions: 12000 Number of tools: 24 X Shaft Stroke: 760mm Y Axis Stroke: 406mm Z-axis stroke: 508mm Rapid feeds linear axes X Y Z: 35m/min Table dimensions: 914x356mm Table capacity: 680Kg Guides: roller High cooling pressure: yes Pressure value: 20bar Chip evacuator: screw Presetting: yes :::D IMENSIONS AND WEIGHT::: Length: 3175mm Width: 2500mm Height: 2667mm Weight: 3629Kg

Inv. Num. : 6730 Type: 325 S Producer: STAMA Created: 1995 GO 2023 Parameters: Control system: SIEMENS 840D Tool magazine: 36 pieces Maximum vertical spindle speed: 10000 1/min X-axis travel: 500 mm Y-axis travel: 300 mm Z-axis travel: 350 mm Cone: SK40 Maximum tool diameter: 100 mm Max. tool length: 220 mm Equipment: Conveyor Central cooling GO 2023: - new drive motors - New SINUMERIC 840D electrical system and system - Spindle after a complete GO with cooling in the middle of the spindle - new hydraulics - new cooling for machining also through the spindle - New air distributions and preparation for pneumatic clamping of workpieces on both tables - Complete GO for tool magazine

This machine is designed for being directly attached to the herring filleting machines Baader 235 and 36. It receives the butterfly fillets, removes the dark fatty layer along the back, and skins them in a meat-saving manner, the silver film is retained on the fillet. The working range is from 19 to 42 cm in total length. Knife sets can be added to cut the fillets into pieces. Easily exchangeable rollers fitted with blades are available for pieces of 15, 20, 24, 26, 30, 33, 36, or 40mm. If the skinning machine is attached, the filleting machines keep on producing butterfly fillets, single fillets with skin as well as fried fish. This line can be completed with Baader 484, Baader 35 and a bulk feeder.

Double lane and fully automatic trimming machine for salmon fillets. Due to advanced sensor technologies and fast calculating, this unit cuts fillets for optimal shape and economic configuration (all the the evaluates based on weight and shape of fillet). Capacity reaches up to 25 gillets per minute. Belt width: 200 mm (each lane). Approx. dimensions (LxWxH): 4500 x 1850 x 2200 mm.

Condition: good, working Designed for slicing of salmon fillet. Capacity: up to 180 slices per minute. Cutting angle 8 - 20 degrees Slice thickness: 1,5 - 250 mm Max. product height: 40 mm Max. product width: 2 х 220 mm Product temperature: from -4 to +4 С Electricity: 3 х 400 V + N + PE, 50 \ 60 Hz Power consumption: 1,2 kW Dimensions: 1950 х 1000 х 1450 mm Weight: 330 kg

Condition: Good, working The SEALPAC A7 suitable for packaging of all types of food: fresh or processed meat, seafood, bakery, petfood, dairy, snacks and sweets. It efficiently processes all sealable materials and fully automatically seals up to 120 packs per minute, depending on tray type and application. The SEALPAC A7 stands for optimal and consistent quality. Tray dimensions (LxWxH) 1. 252 x 182 x 30 mm. Thickness: 620 microns. Weight of package: 37,18 gr. 2. 195 x 153,5 x 35 mm. Thickness: 500 microns. Weight of package: 19,96 gr.

Filleting machine for salmon and trout This filleting machine processes salmon, trout from abt. 2 to 7 kg up to 20 fish/min (depending on fish size). The CT2630 in many ways is similar to the CT 2611. But the main difference from the CT2611 is the combination of band knives and circular knives. Due to this combination the machine CT2630 treats the fillets very gently. The band knives automatically adjust to the size and shape of the fish and the circular knives make sure that the cut is made as close to the backbone of the fish as possible. A clean cut with maximum yield is achieved. With this filleting machine time-consuming readjustment is avoided. By simple adjustment of valve pressure, the machine automatically cuts the required type of fillet. The open design of the filleting machine makes cleaning considerably easier. At the back of the machine you will find two access doors  ...

One of the latest innovations by Baader for the fish industry. This machine is designed for filleting defrosted whitefish (with an average capacity of up to 40 filets per minute). Characterized by improved quality of smooth cutting even on soft fish (doesn't leave bloodstains or gaps on flesh). Easy to maintain at the production line, and easy to operate. Power: 4kW Voltage: 3x 400 V/ 50Hz Water consumption: 10L per/min Water pressure: 2,5 bar

The Breivik is a full stainless steel head-cutting machine for large fish. The machine is designed to be operated with fish of total length including the head, between 50 - 120 cm. Both smaller and larger fish may be processed successfully. Only bleeding fish must be used to obtain the correct placement for the head-cutting process. The fish is placed with the belly downwards and with the bled throat over the throat guide. Place the fish perpendicular to the throat guide into the body and tail carrier. The fish will then be driven towards the knife and the head will be cut and fall of to the right of the machine. The body will continue straight and over the top of the machine. Power consumption: 1,5 kW Dimensions (LxWxH): approx. 1610 x 875 x 1680 mm Weight of machine: approx. 375 kg.

This machine is designed for removing heads from the next fish species: cod, pangasius, catfish, and tilapia. Fish size range: 30 - 70 cm. Capacity: up to 40 fish per minute.

Film processing machine Fuji FG 400; good condition; cleaned and tested; Working width 400mm; Daylight cassette. Film processor Fuji FG 400; good condition; cleaned and checked; working width 400mm; Daylight Cassette.

Catalog No. : 6753 Type: MCV 750 Quick Producer: Kovosvit Made in: 2004, GO 2021 Characteristic: Control system: TPC 2100 Hours on: 4000 h Maximum rotary speed of the vertical spindle: 8000 1/min X-Axis travels: 750 mm Y-Axis travels: 500 mm Z-Axis travels: 500 mm Machine weight: 4000 kg GO: spindle replacement

CNC vertical machining center HERMLE C 22 U With path control Heidenhain iTNC 530 Year of construction: 2014 Travels : X 450 Y 600 Z 330 Speed range : 20 – 18,000 rpm infinitely variable (HSK 63) With the following accessories: NC swivel rotary table 450 mm x 360 mm clamping surface Vertical tool changer with 55 magazine slots (HSK 63) Linear axes standard version Internal coolant supply (IKZ 80 bar) Scraper belt conveyor left Chip wagon 450 l Coolant device Chip flood gun Oil mist extraction Manual Cabin Door , Automatic Cabin Roof Laminated glass safety pane Rotating transparent window (Rotoclear) Electr. Heat compensation iTNC Electr. Handwheel 3D probe Heidenhain BLUM Wz-bruch/ Vermessung 4 pieces Height adjustable machine shoes Operating instructions

CNC vertical machining center MIKRON UCP 710 With path control Heidenhain TNC 426/430 Year of construction: 1998 Travel: X 710 Y 500 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: NC swivel rotary table NCRST 630 600 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots Full protection cabin with sliding doors and interior lighting Electronic handwheel Renishaw Tool Measurement Probe TS 27 R 3D probe infrared Renishaw MP 12 Conveyor Coolant device 4 pcs height-adjustable machine shoes Operating instructions

The machine can gently separate meat from waste components, like bones, veins, and skin. It processes fish, deboned turkey drumsticks, chicken backs, legs, wings, tails, necks, and turkey and chicken carcasses. The solid components remain outside the drum. The ratio between yield and quality can be influenced by means of adjusting the pressure roller. A flexible squeezing belt transports a product to the perforated drum, where it is pressed between the belt and drum. The soft components come inside of the drum through the holes. The solid components stay outside. Yield and quality can be adjusted using the pressure roller. Operation process with a flexible squeezing belt feeds the product to a perforated drum and presses the soft components through the holes of the drum. Capacity: up to 3500 kg per hour Voltage: 3 x 400 V Hole diameter: 2 or 5 mm

Condition: Good, working Man. year: 1994 This machine could be combined with Baader 35, Baader 56, and a bulk feeder.

Manufacturer: ASEPTO GmbH (Germany) Refurbished in 2021; new PLC in 2022 Capacity: up to 5.500 l/h with APV Gaulin high pressure pump, capacity up to 7.000 l/h Brand new control cabinet with S7 PLC Mounted on stainless steel frame for easy reinstallation

The Baader 35 is a processing machine for pelagic fish. It can manufacture the total product line from round fish, such as butterfly fillets, single fillets (with or without skin), fillet pieces (without skin), and nobbed and fried fish products. This machine processes different fish such as herring, salt and herb herring, mackerel, placard, sardine, and trout within a range from 22 to 42 cm in total length. The basic machine can be quickly adapted to the desired product and type of fish through an easy exchange of whole sub-assemblies and components. This line is completed with Baader 484 Autofeeder, Baader 56 Skinner, and a bulk feeder.

CHIRON FZ 26 L Vertical Machining center CNC Control ETA 17- System 10 X/Y/Z - 1800x550x500 mm Feed: 1 - 15000 mm/min Speeds 20 - 6000 rpm Tool taper SK 40 Magazine/tool changer 46 tools Table plate 2600x630 mm Number of T-slots 4 Total power requirement 30 kW Weight ca.11 t Overall size 7300x2650x2700 mm

Metal circular saw 400 V 400-450 mm saw blade D max 150 mm Square 140 mm Flat 275x70 mm Speeds 6, 12, 24, 48 rpm Cycle Supplies

IBC stainless steel container transport container electrically heated 1,000 ltr. Content: 1.000 Ltr. Working pressure: max. vapour pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded-on construction for use by forklift or pallet truck, Insulating sheath with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Outlet with butterfly valve DN 80 reduced to DN 50, lid DN 400, 1 x safety valve, 1 x Kamlock coupling 1", Total weight 381 kg final use: Food Height: approx. 1,670 mm Width/length: approx. 1,200 mm/1,100 mm

Description, subject to prior sale. CNC 4-axis horizontal machining center Make: Matsuura Type: H.Plus-300/PC-5 Y.o.m.: 2003 Control: Fanuc/Matsuura i30 G-Tech X 500 mm Y 500 mm Z 500 mm Spindle revolutions 15000 rpm 240 ATC Pallets 300 x 300 mm Number of pallets 5 SK40 IKZ 25-50 bar Measuring Probe Tool breakage monitoring KSS Cooling New spindle in 7/2022. Spindle hours 4800 April 2021 - tool spindle spindle motor renewed May 2021 - changer arm of ATC repaired July 2022 - tool spindle + motor renewed November 2022 - ATC drive repaired. The ATC, automatic tool changer, has been completely retrofitted. The housing is the original, the wear parts like e.g. bearing, lever, cam discs etc. have been renewed. Machine is in very good working condition and partly retrofitted. It can be inspected working under power. Technical indications, s ...

150 l stainless steel container Manufacturer : Sartorius Technical specifications : - 150 litre stainless steel container heatable, double jacket Interior: -1/+3 bar pressure- and vacuum-resistant Operating temperature 150 °C Double coat: -1/+4 bar pressure- and vacuum-resistant Operating temperature 150 °C Documents available - GMP standard mobile

SPECIFICATIONS: Working area: 3400 x 1300 mm Z 155 X - Y C-axis Main engine: 9 Kw 15-fold tool changer 8-fold clamping system Vertical/horizontal drilling

Stainless steel container Manufacturer: SAV Type 20062 Capacity: 2260 litres Operating temperature product space 95 °C Double jacket for heating and cooling, pressure-resistant up to 8 bar Material V4A

Stainless steel container Manafacture: Noorden Capacity 500 litres Mobile standing stainless steel container Double jacket for heating and cooling without pressure Product space pressure- and vacuum-resistant -1/+3 bar Operating temperature product space around jacket 150 °C Magnetic stirrer on the underbody Power 0.25 kW

Stainless steel container Manufacturer Tannroda GmbH, Edelstahlbau Type SLT/BB 001 - No. 548 Capacity 2200 litres Cylindrical stainless steel container standing on feet Material in contact with the product 1.4404 Interior -1/+3 bar Double-jacketed pressure and vacuum-proof Heatable and coolable Agitator Drawing available, documents available

Stock # U2421-1 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 12500 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2550 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) legs carbon steel legs. New 2003. Last time used in chemical production.

Stock # U2421-3 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) carbon steel legs. New 2003. Last time used in chemical production.

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 2900 rpm at 50 Hz -Power: 6.3 kW 5900 rpm at 100 Hz -Voltage: 220/380 volts -Mounting shaft: Ø 35 mm -Tool: Ø 200 mm -Dimensions: 650/250/H160 mm -Weight: 53 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Take shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 2.5 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 2.7 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Take shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 3 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 1.5 kW 18000 rpm at 300 Hz -Voltage: 165 volts -Assembly: collet -Tool: mm -Dimensions: 520/250/H180 mm -Weight: 28 kg

Processing unit, automatic drilling machine, drilling machine, floor drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 1.1 kW -Speed: l 2665 rpm -Thread recording -Adjustable drilling distance: 15-65 mm -Number: 2x processing units available -Price: per piece -Weight: 23 kg/piece

Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Admission: -Tool: Ø 150 mm -Dimensions: 880/260/H300 mm -Weight: 18.5 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Admission: -Tool: Ø 150 mm -Dimensions: 560/220/H240 mm -Weight: 16 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.55 kW 2700 rpm at 50 Hz -Power: 0.95 kW 5360 rpm at 100 Hz -Voltage: 220/380 volts -Acquisition shaft: Ø 20 mm -Tool: Ø 175 mm -Number: 4x engines available -Price: per piece -Dimensions: 430/170/H185 mm -Weight: 15 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1 kW 17030 rpm at 300 Hz -Voltage: 165 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 280/60/H110 mm -Weight: 4.3 kg

Double end profiler, edge processing machine, scoring motor, hogger motor, milling motor, spindle motor -Power: 0.4 kW 12000 rpm at 200 Hz -Voltage: 133 volts -Take-up shaft: Ø 20 mm -Tool: Ø 70 x 20 mm -with indexable milling cutter -Number: 1 piece available -Dimensions: 285/60/H170 mm -Weight: 5kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 1.125 kW 18000 rpm at 200 Hz -Voltage: 165 volts -Take shaft: Ø 15 mm -Dimensions: 320/75/H160 mm -Weight: 6 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 1.125 kW 18000 rpm at 300 Hz -Voltage: 165 volts -Take shaft: Ø 15 mm -Dimensions: 320/75/H160 mm -Weight: 6 kg

Double end profiler, edge processing machine, scoring motor, hogger motor, spindle motor, milling motor -Manufacturer: Peske, milling motor type VS 31.09-4 -Power: 0.37 kW 8540 rpm at 300 Hz -Voltage: 165 volts -Take-up: collet -Tool: Ø 8 mm -Number: 2x motor available -Price per piece -Dimensions: 260/60/H140 mm / 255/60/H155 -Weight: 3.5 kg/pc.

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 250/80/H170 mm -Weight: 4.7 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Connection plug broken -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg