press ton used for sale

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

used, kpl. 1 year warranty, plate size 630 x 630 mm, 50 plates, closed outlet, 30 mm cake thickness, pressure max. 15 bar, capacity approx. 480 liters, filter area 33m2, dimensions 4300 x 1200 x 1200 mm, weight 2.2 to, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

used, kpl. 1 year warranty, plate size 630 x 630 mm,25 plates, closed outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 200 liters, filter area 16m2, dimensions 3000 x 1200 x 1200 mm, weight 1.5 to, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 40 plates, open outlet, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 416 liters, filter area 42m2, dimensions 5000 x 1400 x 1600 mm, weight 5.5 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 600 liters, filter area 48m2, dimensions 5500 x 1400 x 1600 mm, weight 5.8 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 630 x 630 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 8 bar, capacity approx. 234 liters, filter area 19m2, dimensions 3000 x 1200 x 1600 mm, weight 2 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, attached compressed air diaphragm pump

Hilge pressure boost pump Mint from spare parts inventory for example, for CIP systems Motor NMG 160 MB242FF300D1 380-415 V 50 Hz 15 KW Q = 22, 5 m m³ / h H = 110 m n = 2900 / min

Capacity: 2500 ton Slider stroke: 190 mm Size of a working course of slider before its extreme bottom position corresponding nominal capacity: 4.5 mm Number of slider courses per minute: 20 Maximum distance between table and slider (in lower position of slider): 800 mm Distance adjustment between table and slider: 20 mm Table overall dimensions: - from front to rear: 1400 mm - from left to right: 1250 mm Thickness of a under-forginig plate: 230 mm Hole diameter in a table: 125 mm The size of a slider in front - back: 900 mm Lower eliminator stroke length: 190 mm force of the bottom pusher: 75 ton Distance between railings: 950 mm Course of a pusher in a slider: 15 mm Capacity of a pusher in a slider: 25 ton Admissible number of starts per minute: 10 Machine overall dimensions - length: 3910 mm - width: 3920 mm - height: 6220 mm Press weight: 97715 kg

used, kpl. 1 year warranty, plate size 630 x 630 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 360 liters, filter area 28m2, dimensions 3800 x 1400 x 1600 mm, weight 2.5 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 470 x 470 mm, 35 plates, open outlet, 25 mm cake thickness, pressure max. 12 bar, capacity approx. 150 liters, filter area 12m2, dimensions 2500 x 900 x 1200 mm, weight 800 kg, hand hydraulics, drip plate, filtrate channel, with or without filter cloths

Max. capacity 1000 tons Slide stroke 240 mm Shut-height (max.) 650 mm Wedge adjustment 10 mm Number of slide strokes 100 rp

used, kpl. 1 year warranty, plate size 630 x 630 mm, 40 plates + 40 frame, closed outlet, 40 mm cake thickness, pressure max. 6 bar, capacity approx. 500 liters, filter area 27m2, dimensions 4800 x 1200 x 1600 mm, weight 2.5 tons, hand hydraulics, drip plate, filtrate channel, with or without Filter cloths

used, kpl. 1 year warranty, plate size 630 x 630 mm, 40 plates, open outlet, 30 mm cake thickness, pressure 7/15 bar, capacity approx. 384 liters, filter area 17m2, dimensions 4500 x 1200 x 1500 mm, weight 350 kg, motor hydraulics, automatic. Plate transport, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 55 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 710 liters, filter area 58m2, dimensions 6000 x 1400 x 1800 mm, weight 6500 kg, motor hydraulics, automatic. Plate transport, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 60 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 800 liters, filter area 64m2, dimensions 6000 x1300 x 1500 mm, weight 5800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 100 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 1320 liters, filter area 106m2, dimensions 9000 x 1300 x 2200 mm, weight 11,000 kg, motor hydraulics, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 1200 x 1200 mm, 100 plates, closed outlet, 20 mm cake thickness, pressure 15 bar, capacity approx. 1850 liters, filter area 224m2, dimensions 9500 x 1600 x 2300 mm, weight 18,000 kg, motor, automatic hydraulics. Plate transport, with or without filter cloths

used, kpl. 1 year warranty, plate size 1200 x 1200 mm, 80 plates, closed outlet, 30 mm cake thickness, pressure 15 bar, capacity approx. 2400 liters, filter area 185m2, dimensions 7500 x 1600 x 2300 mm, weight 18,000 kg hydraulics, engine, automatic. Plate transport, with or without filter cloths

used, kpl. 1 year warranty, plate size 1200 x 1200 mm, 70 plates, closed outlet, 30 mm cake thickness, pressure 10/15 bar, capacity approx. 2100 liters, filter area 162m2, dimensions 7500 x 1600 x 2300 mm, weight 18,000 kg, motor hydraulics, automatic. Plate transport, with or without filter cloths

used, kpl. 1 year warranty, plate size 1000 x 1000 mm, 90 plates, closed outlet, 30 mm cake thickness, pressure 15 bar, capacity approx. 2300 liters, filter area 153m2, dimensions 8500 x 1600 x 2100 mm, weight 14,000 kg hydraulics, engine, automatic. Plate transport, with or without filter cloths

Crimping force at 12 bar: 8 to Pressure to 4 bar: 4 Table size 280 x 280 mm Height 350 mm RADIUS 160 mm Weight 350 kg W x D x H approx. 0.5 x 0.75 x 2,15 m -Stroke adjustment with fine Skallierung: 0.02 mm -Anti-rotation -pneumatic foot switch

N E U! LEIMOA PLUS The new, innovative gluing press As standard with side pressure device for clamping frame universally applicable, exact and precise angle mounting, can be operated by a user for the gluing of drawers cabinet frame and surfaces, etc. OPTIONAL! Basic equipment: 3 Units with rack and pinion gears 90 ° fence and page print setup with rack and pinion gears! Einspannmaße: 1170 x 2300mm G & FE-LEIMOA-PLUS SPECIAL PRICE NET OF 1590.-

A U S S T E L L U N G SSTÜCK! N E U! Gluing press VP 2000 Basic equipment: 90 ° Stop 3 Units with toothed pinion gears Quick adjustment up to 140 mm Ease of use Reversible The gluing press from Bavaria Can be used universally Exact and Winkelgenau Can be operated by a user G & FE-VP2000 SPECIAL PRICE NET OF 990.- Optional equipment available!

The CNC press brake SMD PBH 110-3100-4C produced in 2006 is offered in a set with the ANTIL TWISTER F5 robot. Technical parameters : - manufacturer: SMD - type: PBH 110-3100-4C - year of production: 2006 - control: CNC CYBELEC ModEva 10 - overworked time: about 20,000 man-hours - pressure force: 110 tons - bending width: 3100 mm - maximum working speed: 10 mm / s - table width: 60 mm - table height: 960 mm - stroke: 465 mm - frame spacing: 2600 mm - throat: 410 mm - power supply: electric - 11.5 KW, 400 V three phases - oil tank capacity: 250 l - dimensions of the press: 3960 × 2045 × 3650 mm - total weight: 9500 kg Processing on a 3 m table and palletizing of finished details on 3 europallets.

Scratch chain conveyor MATEC For wood chip extraction -Trogwidth 300 mm -Troghheight 450 mm -Troglänge about 5500 mm -Steel sheet 4 mm -Creation below once about 65 ° -Discard height from ground about 4500 mm -single-stranded chain guide links A-A 80 mm -Conveyor slats plastic height about 130 mm -Drive snail gearbox engine electric 1.5 kW, 3x400 V, 50 Hz Weight about 1100 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Technical data: Nominal power 600 kg/h Power: Drive engine 0.75 (1.02) kW (hp) Brush cleaning 0.37 (0.5) kW (hp) High-pressure cleaner 4.7 (6.4) kW (hp) Electric connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 825 mm Width 1 085 mm Height 1 290 mm Discard or drop-in height 1 290 mm Bandwidth 420 mm Order width 300 mm Order height 10-50 mm Weight (ribbon press) 550 kg Material 1,4301/AISI 304 Juice yield 70% Ribbon speed (infinite) 2.1-5.5 m/min Transcourse time 0.4-1 min Water connection at least G 1/2, "min 12 l/min Height juice drain 305 mm Height Trester ejection 780 mm Can be used for nuclear and stone fruits Included high pressure cleaner, compressor

- 5.5 kW - 950 rpm

Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG) Purpose: Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG / 10 KN maximum load). Without distance measurement. Manual lifting spindle press - Static pressing force 5 KN (0.5 to) - Portable, stable press frame made of polyamide PA 6G - Manual spindle stroke gearbox with spindle 20 mm, incline 5 mm - With handwheel diameter 120 mm and handle - Gearbox reduction 1: 10, per handwheel revolution 0.5 mm spindle path - This requires only very low hand force. - Table size 235 195 mm - Light width 190 mm - Stamp size diameter 70 mm - With 4 holes 8 mm for fixing a larger stamp plate - Very easy to operate by spindle and worm gearbox - Total weight approx. 25 kg Force measuring device: Weighing module with shear rod load cell for nominal load 1,100 kg.  ...

Manufacturer: ERFURT - Niemcy 2 PIECES AVAILABLE Model: PKZV I 1250 Condition: Very good, complete, under power Technical details Table: 4000 x 1800mm Press weight: 230T Force: 1250T Slide stroke: 630mm Centres of pressure: 2 Adjustability of slide: 630mm Max delight between bolster and slide: 1165mm Width beteen columns: 4000mm Slide area: 3950 x 1800mm Bed area: 4000 x 1800mm Opening in bed: 3750 x 1300mm Main motor power: 132kW Idle stroke rate: 11 per minute Counter pressure of cushion in bed: 250T Stroke of cushion plate: 250mm

Ortmann +Herbst / Crown Simplimatic 100/15/15 Glass Bottle Filler with 100 filling valves, 15head crown corker and 15head Zalkin plastic cap screw capper with Pick and Place System Model: Hansa M Built: 1999 Running direction: left - right Pitch: 113 mm with double pre-evacuation Capacity: up to 40,000 bph at 250 ml of mineral water bottles up to 30,000 bph with 330 ml of beer glass bottles Electric: Siemens S7 with touch panel with safety housing incl. 200, 250, 330, 500, 750 and 1,000 ml sets (bottle drawings attached) incl. many spare parts (e.g. filling valves, lifting cylinders, crown cork head etc. - list attached) The product distribution list was renewed in November 2019. Hot filling is also possible if you use Nitrogen instead of Co2.

Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 140 tons

45 To-Stoessel performance adjustable 45 mm hub adjustable 8-80 mm table size 690 x 410 mm punch mounting 50 mm unloaded 200 mm height 400 mm electric pneumat. Ortlinghaus single-disc clutch and disc brakes with auxiliary brake, Central grease lubrication system, Hohenverstellbar. Report, Wellenrissprufung, see table, UVV - 2014 - still in use ? see operating instructions, Tech.Zustand - good, ready for use

Producer: INJECT STAR Type: FPW 17 Internal dimensions: Length 1620 x width 560 x height 1480 mm External dimensions: Lenght 1000 x width 500 x height 1050 mm 1 piece - not complet. Used pneumatic meat press for meat and bacon INJECT-STAR type FPW 17 with the possibility of the time setting and the automatic program - Air consumption approx. 7 bar Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

used baler Manufacturer: PAAL Type: CPH 6540 Built: 2007 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force at approx. 300 bar: 650 kN Channel cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of connecting wires: 4 pieces Binding: 4-fold horizontal Power: Main drive motor: 75 kW Wire pull: 3 kW Twisting: 3 kW Hydraulic oil tank volume: 2200 l Machine weight: 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: - Machine design consisting of: - printing plate with bearing roller guide at the bottom and inside, - Press box bottom made of highly wear-resistant special steel, - interchangeable, screwed tread irons for the lower plate rollers, - Doors ...

DECKLAGEN PRODUCTION LINE TORWEGGE with WEINIG H22BL FINSIH LAYER PRODUCTION LINE ML-Presseen Torwegge Heating bed length 3 m Wood types FI, AI, LÄ, DG, ZI ML slat width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target capacity/layer 300 m2 LH 500 m2 19 - 31 mm Fi Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may ... WEINIG High Performance Profile Machine, Type Hydromat 22 BL Built in 1995 with splitting unit (lamella saw) Bring (au ...

HOT PRESS Type COLOMBO REMO 6/90 heathed by water useful size plates mm. 3000 x 1300 n.06 cylinders diam.mm. 90 open mm. 450 hydraulic pump motor power Hp 3 Thrust 90 Ton Volt. 380/50

Attachment: Chamber filter press-neuwertig demonstrator Hours of operation: No Design: page Holm led Filter plate format: 250 x 250 mm Number of plates: 8 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: 0.56 m m² Presses contents: approx. 7 dm3 PCB package length: 379,2 mm Filter pressure: 15 PSI Plate transport: manually Product-contacting parts: PP + stainless steel Dimensions: Lxwxh approx. 960 x 400 x 360 mm Weight: 350 kg Pumps: optional Purchase or rent: Tours of the facilities in consultation with us to work. Added: multiple attachments are there about End of April available. Order please, because the demand is very high. You want to rent this facility or to buy? Contact us, we are available.

Attachment: Chamber filter press - as good as new, demonstrator Type: REWA auto-hydraulic-Tigo3 quick-opening system Model: automatic Chamber filter press with quick draining execution: zero - man operation possible Hours of operation: No Design: page Holm led Filter plates sizes: 1000 x 1000 mm Plate number: 60 Filter plates: PP Thickness: 30 mm Filter cloths: optionally available in voting on the medium Schedule: closed Filter surface: 100 m square Presses capacity: approximately 1480 dm3 PCB package length: 3624 mm Filter pressure: 15 PSI Plate transport: automatically Frame: Steel Q235 Product-contacting parts: PP + stainless steel Dimensions: Lxwxh approx. 12200 x 1500 x 1360 mm Weight: 4000 kg Pumps: optional Purchase or rent: Tours of the facilities in consultation with us to work. Added: multiple attachments are there about End of April available. Order please, because the demand ...

Single Belt Press EB 1004 Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2700 x 1670x 1680 mm Weight: 1340 kg Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh wate ...

Attachment: Chamber filter press used semi mobile Model: pilot plant on platform mounted Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 20 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Filter surface: approx. 4.72 m m² Presses contents: approx. 56 dm m³ PCB package length: 1024 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Pumps: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Condition: It is a complete semi-mobile system on platform mounted, incl. control cabinet as full drainage system. This compact drainage system is easy to transport and can be taken in a very short time in operation. Appendix: Selling without trailer You want to rent this fac ...

One belt press EB 1004 EL Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 3390 x 1670x 1630 mm Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh water (connection f ...

TYPE: DIRECT, BILLET DIA.: 90 MM, LENGTH: 400 MM

Press brake AMADA HFE 220-3 Number of controlled axes / CNC controlled axis: 7 Condition good, ready to use, visit under electricity possible / Condition: good, in use, can be seen under power in Poland Pressure / Pressure: 2200 kN / 220 ton Bending length / working range: 3100 mm Distance between stands / distance between columns: 2700 mm Stroke / stroke: 200 mm Delivery speed / downwards speed: 1-100 mm/s Working speed / working speed: 1-10 mm/s Retraction speed / backwards speed: 1-100 mm/s Dimensions Machine / Machine's dimensions: 4.3 x 2.3 x 3.1 m Weight / Weight: 14 ton Machine has: new safety cards from Pilz, new tool clips, new keyboard of control, new stop finger Machine has: new safety cards by Pilz, new tool clamps, new CNC cover, new back gauge fingers

Automatic control: At the push of a button, the machine automatically closes the pre-loading box and the upper Lid (the pestle is extended). Then the front lid opens and the bale is ejected. Then the front lid (the upper one) closes The lid opens and the pestle goes back and the machine waits for another push of a button (filling the pre-load box). Metal press RMH 33 S_ 30 x 30 (new machine type: metal press) Manufacturer: RMH Type: RMH 33 Package dimensions in cm: 30 x 30 x material Package Weight: 30 - 50 kg Total weight: 5500 kg Dimensions Box (WxHxL): 30 x 50 x 100 cm Dimensions Machine (WxHxL): 120 x 85 x 410 cm / without preload box Cycle time: 60 seconds Drive: 30 KW Compression force: 60 T Horizontal ramming compression force: 100 T Working pressure: 300 bar Control: Automatic

Attachment: Chamber filter press used Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 30 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Procedure: open Open filter surface: approx. 7.5 m square Presses contents: approx. 90 dm m³ PCB package length: approx. 1512 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Hydraulic pump: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Safety equipment: optional Optional accessories: optional possible depending on design Extensions: In consultation according to the design Special services: Refurbished service to customer specification is optional. The system goes through a service check or a complete overhaul before delive ...

Attachment: Chamber filter press used Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 26 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 9.7 m m² Presses contents: approx. 130 dm3 PCB package length: 1500 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Dimensions: Lxwxh Empty weight: Accessories: depending on the type and customer Special services: Refurbished service to customer specification is optional. The system goes through a service check or a complete overhaul before delivery. On these systems, we guarantee between 6 to 12 months. Condition: The plant is located in a very good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility ...

8 color size 1270 mm<br><br><br><br>

6-color R21454/14 ROTOMEC gravure machine model: Rotopak 1/S web width: max. 820 mm age: overhauled 1984 6 gravure printing units material: 50g/m² - 200 g/m² (paper /PE/ALU/PE) real diameter: max. 800 mm bale width: max. 900 mm gravure printing cylinder: circumference 440 – 800 mm Still in operation: Yes Available: sofort

Filter area: 6.5 m2 Material: polypropylene Total width with filtrate pipe and valves: approx. 2.3 m Total length: approx. 8.9 m Total height: approx. 1.9 m Weight: approx. 5.5 t Effective belt width: 1.0 m Effective belt length: 6.5 m Belt forward stroke: 0.5 m Filtrate zones: 13 zones a 0.5 m Zone arrangement selected (variable): zone 1-2 filtration zone 3-4 1st wash (overflow weir) zone 5-6 2nd wash (overflow weir) zone 7-9 3rd wash (nozzle system) zone 10-11 steaming zone 12 pressing & blowing zone 13 dewatering

Properties: + Semi-automatic + very good value for money + already as standard: mobile machine, optimal for quick ground wiping + Stainless steel partial knife + coated knife head + even division of the dough + excellent round inges, the dough pieces + ergonomic knife cleaning position (head swivelable 90 degrees forward) + easy and fast adjustment of the chamber height + side bracket for actuator, immediately at hand SERIES equipment: + 3 impact plates included SPECIAL accessories, available at an extra cost: - additional impact plates for DivObun Size 4-30: EUR 93,-- net / Pcs