press brake 6000 used for sale

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder, pneumo-hydraulic cylinder, hydro-pneumatic press cylinder -Manufacturer: TOX PRESSOTECHNIK, pneumohydraulic cylinder type S 04.113.040.120 -Lifting distance: 300 mm -Piston: Ø mm -Piston rod: Ø 30 mm -Quantity: 2x cylinders available -Price per piece -Dimensions: 645/85/H130 mm -Weight: 16 kg/pc.

Crosscut and miter saw, pull saw, chop saw, aluminum circular saw, metal circular saw, metal cutting saw, underfloor circular saw with double miter -Manufacturer: Pressta Eisele, underfloor circular saw with double miter -Motor power: approx. 1.5 kW -Speed: approx. 2820 rpm -Saw blade: Ø 350 mm, swivels left 45° / right 90° -Cutting area: 90° flat 270 x120 mm -Cutting area: 45° flat 210 x 120 mm -Workpiece clamping: pneumatic horizontal clamping devices left and right -Cross stop: movable -Transport dimensions: 860/730/H1250 mm -Weight: 175 kg with pallet

Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm -Weight: 416 kg

Commission trolleys, rack trolleys, paint drying trolleys, specialist transport trolleys, transport trolleys, window profile trolleys, -Number: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Support bottom: 720 mm -Support height: 1400 mm -Weight: 62 kg

1000 l oil cabinet dispensing quantity selectable. Delivery possible Please inquire with place and postcode and whether there is unloading possibility. VAT not identifiable .

Max. Sheet format: 680 x 780 mm Min sheet format: 240 x 240 mm No chemistry Improves pressroom productivity, reduces makeready time. Open interface supports most rips and prepress workflows Cip3 compatible Protek aww 650 processor Very good condition Available immediately

Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos

Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.

Year: 2010 - technically efficient, ready to work - after full service - cooling installation - copy template - pneumatic clamping set

Machine for cutting, cutting, folding and extrusion of sheet metal Projection: 1250 mm Number of beats/min: 560/1120/2240 beats per minute Stroke height: 2 – 10 mm Cutting speed: 0.5 – 8 m/min Max. sheet thickness: 9 mm Power supply: 380/50 V/Hz Power: 3.9KW Weight: 1.72 t Dimensions: 2.3 x 0.9 x 1.6 m

Underfloor aluminium circular sawing machine Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand - Parallel stop

General SKU004Y057 LocationBarneveld MakePressindustria S.p.A. TypeTE.3/SV/R/5 No.4302 Year of construction1983 Pressure Working pressure0.067 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume7 Ltr. Motor0.55 KW Specified Features - Processing vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselVacuum processing vessel (1x) Capacitymin. 3/max. 7 Ltr Vessel sizesdia. 250x250mm, Vessel can be lifted hydr. Dished bottomcheck Flat top sidecheck With covercheck With jacketcheck Max. temperature160 Degr. C. With anchor stirrerscraper stirrer Counter rotating stirrercheck Motor0,07/0,22 KW, 220 Volt (3 Ph) Speed mixing shaft3-60 Rpm With homogeniser(400-2000 Rpm) Motor0,2/0,55 KW Information With switchgearcheck Floorspace1,2x0,9 M Total height2,3 M Technical specs Extra informationVessel can be  ...

Year: 2013 - technically efficient, ready to work - after full service - two engines: 3 kW - cutting disc diameter: 2x Ø400 mm - maximum profile height: 250 mm - maximum dimensions of the 90° cutout: 135mm x 135mm - vertical disc manually adjustable in the range of 70° - 90° - 30° - material stop bar manually adjusted in the range of 30° - 90° - 30° - manual adjustment of the depth and height of the cutout

saw blade diameter: 400 mm cutting length: max. 4000 mm : 140 x 190 mm turning speeds: 2890 U/min engine output: je 2,2 kW connected load: 4,5 kW weight of the machine ca.: 0,75 t Dimensions (LxWxH): 5,0 x 1,0 x 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm

Cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic Workpiece Clamps Minimum Quantity Spraying Device Manual feed Weight: approx. 280 kg

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width:At 90° processing of profiles up to 300 mmTip mitres up to 30° / profile height max. 280 mmNotching depth:at 90° horizontally up to 185 mm / at 90° vertical up to 230 mmMaterial stop:swivel 30° - 90° - 45° Swivel material stop with latching points and digital display Latch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication

Manufacturer : Fette Model: Perfecta 2000 Year : 1988 Type : Automatic tablet press Machine weight: 2200 kg   Number of pressing stations : 36 Maximum compression force : 80 kN Maximum pre-compression force: 15 kN Maximum tablet diameter : 16 mm Maximum tablet thickness: 8.5 mm Maximum hourly output: 245,100 tablets Maximum filling height: 18 mm Divided circular scale diameter: 410 mm Die plate speed: 25-95 rpm Die diameter: 30.16 mm Die height: 22.22 mm Punch body diameter: 19 mm Punch length: 133.6 mm Punch insertion depth in die: 2 - 6 mm Overall footprint: 1212 x 1126 mm

Perfecta 1000 rotary tablet press with electrical cabinet   Manufacturer: Fette Model: Perfecta 1000 / P1000 Year : 1985 Number of pressing stations: 22 Maximum compression force: 80 kN Maximum pre-compression force: 20 kN Maximum tablet diameter: 25 mm Maximum tablet thickness: 10.5 mm Maximum hourly throughput: 72,600 tablets Maximum filling height: 22 mm Pitch diameter: 315 mm Die plate speed: 15-55 rpm Punch shape: EU 1 Die diameter: 38.1 mm Die height: 23.8 mm Punch body diameter: 25.4 mm Upper punch length: 133.6 mm Length of lower punches: 133.6 mm Depth of punch insertion into die: 2 - 6 mm Machine footprint: 1030 x 1090 mm Net weight: 1800 kg Documentation available

Manufacturer: Sefitec Year : 1982 Type : Filter press Trays : 800 x 800 mm Quantity : 65 units Capacity : 446 dcm3 Surface : 30 m2 Hydraulic unit 1,1 KW Stainless steel coating Discharge: manual

Description: Inner diameter: 220 mm Inner belt width: 200 mm Load capacity per reel: 150 kg (reel must be bolted to the floor) , Incl. wiring diagram weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 1,240 x 1,120 x 2,200 mm

This PRESSTA EISELE Profilma 600 R was manufactured in 2013. It features a 9.2 kW drive with an 18.5 kW reinforced option and uses saw blades with a diameter of 600 mm. The cutting range allows for a maximum cutting height of up to 210 mm and a maximum cutting width of 350 mm. It includes a Siemens S7-300 control system and a chip extraction system with a 4 kW motor. Contact us for more information.

Servo motor with brake, permanent magnet motor REXROTH MAC063B-0-JS-3-C/095-A-1/S001 228369 Shaft: Ø 14 mm Flange: 100 x 100 mm New ! Dimensions: 250 x 100 x 145 mm

Servo motor with brake, permanent magnet motor ELAU AG SM 070-60-010-P1-45-S1-B1 ( SM070-60-010-P1-45-S1-B1 ) 6000 rpm IP64 / 65 400 V Shaft: Ø 11 m New ! with instruction manual ! Dimensions: 265 x 105 x 70 mm

Servo motor with brake, permanent magnet motor SIEMENS 1FK7032-5AK71-1HH0 6000 rpm IP64 270 V Shaft: Ø 14 mm Flange: 75 x 75 mm used, tested ! Dimensions: 250 x 120 x 75 mm

Servo motor with brake, permanent magnet motor REXROTH MSK050C-0600-NN-M1-UG1-NNNN R911298355 6000 RPM 600 V AC IP65 Shaft: Ø 19 mm Flange: 98 x 98 mm used, tested ! Dimensions: 275 x 140 x 100 mm

Servo motor with brake, permanent magnet motor, AC servo motor KUKA 1FT3050 Item no.: 0269225435 0,57 kW 6000 rpm 108 V IP64 Shaft: Ø 10 mm Flange: 100 x 100 mm used, tested ! Dimensions: 225 x 135 x 140 mm

Servo motor with brake BECKHOFF AM237M-0021 ( AM237M0021 ) 0,0,5 kW 6000 rpm brake: 24 V DC IP64 shaft diameter: Ø 10 mm flange: 75 x 75 mm used ! Dimensions: 250 x 75 x 110 mm

Technische Daten: - Schnittlänge max. 6200 mm - Schnittbreite max. 600 mm - Schnitthöhe max. 160 mm - Sägeblattdurchmesser 550 mm - Sägeblattbohrung 30 mm - Motorleistung Säge 11 kW - Getriebemotor für Vorschub mit Inverter 1,1 kW - Motor Breitenverstellung 1,1 kW - Gesamtleistung 13,20 kW - Spannung 400 V, 50 Hz - Sägeblatt-Vorschubgeschwindigkeit stufenlos 0 - 80 m/min. - Sägeblatt-Rücklaufgeschwindigkeit 80 m/min. - Druckluftanschluss 6 bar - Absaugstutzen 2 x 130 mm, 1 x 200 mm - verschiebbares Bedienpult an der Bedienseite - gummiertes Fusspedal für Start- und Vorschubregulierung des Sägewagens - Display mit Tastern zur Einstellung der Schnittgeschwindigkeit - Absaugbalken mit integriertem Lamellenschutz - elektrische Breitenverstellung mit Kugelumlaufspindel und 2 Geschwindigkeiten - inklusive HM-Sägeblatt 550 x 30 x 4,5 mm Z 44 - 3 Positionen für Höhenverstellung Sä ...

Technical data: hydraulic undertable circular saw unit - drive power motor 7.5 kW- diameter saw blade Z=48x5 600 mm- diameter saw blade bore 30 mm- inclined working table Yes- Automatic rotation of the table -70C 0C+70C- Speed of rotation from / to 0C / 70 C 3s- Positioning accuracy +/- 0.2C- Pneumatic workpiece holder 2 pieces- Pneumatic side organizers 2 pieces- Safety cover via capping unit Yes- Cutting capacity at 0C: 160 x 310 mm, 80 x 390 mm- cutting capacity at 45C: 160 x 220 mm, 80 x 270 mm cutting capacity at 70C: 160 x 90 mm, 80 x 130 mm- minimum workpiece thickness 10 mm connection values - supply voltage 400 V / 50 Hz- Control voltage 24 V compressed air requirement at 8 bar per cycle approx. 8 Nl- Suction nozzle FI100 mm 2 pieces- Suction nozzle FI160 mm 1 piece- air speed Suction in center of nozzle approx. 25-35 m/s Electronically controlled slider:- Loading length: 6000 m ...

- max. Arbeitslänge 6200 mm - max. Arbeitshöhe 1300 mm - min. / max. Werkstückdicke 10 / 150 mm - 12 vertikale Hydraulikzylinder dm 80 mm - 12 horizontale Hydraulikzylinder dm 40 mm - 2 seitliche Öffnungszylinder dm 63 mm - Motorleistung Hydraulikaggregat 5,5 kW / 400 V - Abmessungen L=6600, B=1650, H=2250 mm - Gewicht 5000 kg

Please note! Needs to be checked

- Producer Venjakob - Type VEN SPRAY DUO/C CNC 6000 - Year of construction 2004 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Diameter exhaust air pipe 500 mm - Exhaust air 10.000 m³/h - Transport belttransport System - Feed speed adjustable ~ 2 - 7,5 m/min - Belt cleaning system - Belt cleaning system with v-belt - Lacquer reclaiming system with v-belt - Gun control touch screen CNC 6000 - Number of installed lacquer circles 2 Stk. - quick change system for spraying guns - Supply air box - Suitably for water based lacquer - Suitably for solvent based lacquer - Switch cabinet built into the machine - Total connection power ~ 29 - Voltage / HZ 400 / 50 - Colour 7035 - Location, on stock - Voltage fluctuation max. +/- 5 %

60/5 Ton x 60 Meter DOCKYARD- & QUAY CRANES LIEBHERR BOS 6000-60 Litronic (2007) Main hoist - 60 Ton Auxiliary- 5Ton Rail Span - 8 Meters Rail is Excluded (Part of the structure). Capacity: 60/5 Ton x 60 Meter Make LIEBHERR Serial 162845 Year 2007

Cat.-Nr. 13-0176 in a very good condition material: V2A � AISI 304 (1.4301) � surface: outside and inside 2B=IIIC Manufacturer: com. Binder GmbH Upper bottom: - flat conical lid with with CIP-cleaning and connection DN 65 - manhole oval 435 mm x 310 mm with clamping bracket and screw plug - CIP-connector DN 50 - Ventilation connector 200 mm - 1 flanged connector DN 50 - 2 eye hooks Tank body: - thread connector on the side above DN 50 - thread connector on the side above DN 50, 40 cm depth - with overflow pipe inside DN 100 up to the top of the tank bottom - fill pipe installed inside to tank center DN 100 welded from top to bottom - ladder hook 500 mm Lower bottom: central conical bottom outlet pipe DN 50 on 4 stable trumpet feet with calotte height adjustable DxH: 1.720 x 3.700 mm weight: appr. 800 kg All prices are valid Ex-Works, excl.V ...

Ajan PP 260A 2000 mm x 6000 mm pla 260 Amper Pipe cutting preparation Machine is in good working condition

Servo motor, electric motor, DC motor -Max. Speed: 6000/49 rpm -Power: 0.52 kW -Torque motor: 1.15 Nm -Shaft: Ø 25 mm -Construction: B5 -Gearbox manufacturer: SEW Eurodrive -Type: RF27 AQH80/2 -Translation: 1:28.37 -Dimensions: 410/140/H140 mm -Weight: 8 kg

Cartridge heater, immersion heater LOVAL 6000 W ( 6000W ) 400 V Immersion depth: 420 mm New ! Dimensions: 550 x 65 x 65 mm

Switch-disconnectors, cam switches EAW, ELECTRICAL SWITCHGEAR ROCHLITZ Type 6000 0064 311120 ( A60000064311120 ) TGL 35799 4 63 A 660 V AC 50 Hz IP55 Body Material: Aluminum New ! Dimensions: 200 x 200 x 130 mm

DC motor with tachogenerator BAUMÜLLER fGNF 132 MV ( fGNF132MV ) 19,5 / 36.9 / 36.9 / 19.5 kW 1000 / 1840 / 3100 / 6000 rpm 240 / 400 / 400 / 400 V DC external excitation: 310 / 310 / 116 / 58 V DC Flange: Ø 230 / 300 x 260 mm bolt circle diameter: Ø 265 mm 4x Bore: Ø 12 mm Tachogenerator: GHT 612/42 20 V at 1000 rpm with external control box main motor for machining center HELLER BEA 05 DC used, tested ! Dimensions: 1040 x 350 x 260 mm

Servo Motor, Spindle Motor FANUC ai 8/8000 A06B-1407-B150 (probably) B-65272EN 5,5,5 to 11 kW 1500 to 6000 rpm 8000 rpm 149 - 230 V flange: 205 x 205 mm shaft: Ø 48 mm New ! Dimensions: 600 x 260 x 205 mm

Servo motor, permanent magnet motor REXROTH MSK061C-0600-NN-M1-UG1-NNNN R911315844 6000 Unnn /min 600 V AC IP65 Shaft: Ø 19 mm Flange: 115 x 115 mm New ! Dimensions: 320 x 115 x 160 mm

Servo motor with forced ventilation, permanent magnet motor BAUMÜLLER VDOKFF 132 M46 ( VDOKFF132M46 ) 18,5 kW 1500 - 6000 rpm 305 - 416 V AC IP54 shaft: Ø 42 mm flange: 260 x 260 mm external fan: Motor ODF 56-2 0,08 kW 3000 rpm 200 - 265 / 345-460 V AC Ersatzteil für TRAUB TND300 ! used, tested ! Dimensions: 1120 x 305 x 340 mm

DC tachogenerator VEM Type: 1632.1 6000 rpm 100 V Dimensions 23x17x17

2-strand chain hanger with CWG hook PAGUS load capacity 0 - 45°: 4250 kg load capacity 45 - 60°: 3150 kg length approx. 6000 mm suspension head: approx. 90 x 150 mm used, tested ! Dimensions: 400 x 400 x 300 mm

Housing unit, three-hole flange bearing housing unit, flange bearing PAGUS 2 x deep groove ball bearing FAG 6000-C-2Z shaft thread (outside): M8 x 1.25 , Length: 10 mm Shaft thread (inside): M5 x 0.8 , Length: 5 mm Case diameter: Ø 37 mm Flange diameter: Ø 55 mm bolt circle: Ø 47 mm , 3x thread M5 x 0.8 Material: stainless steel ! New ! Dimensions: 55 x 55 x 40 mm

1850kW asynchronous motor Short runtimes due to use in the test laboratory Overhaul-Repair 2011 6000V / 1850KW / Weight 7.4t / IP 23 Overhaul-Repair 2011

Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table -Manufacturer: Plates, scissor lift table type 6.0 T/F/A -Load capacity: 6000 kg -Platform: approx. 1740 x 1280 mm -Dimensions retracted: height 975 mm -Dimension extended: height 1390 mm -Hydraulic unit: Kunz/Elmot 1.5 kW / 180 bar -Transport dimensions: 1740/1280/H1985 mm -Town weight: 1270 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 6000 rpm -Torque: 3.8 Nm -Construction: B5 -Shaft: Ø 14/26 mm -Dimensions: 420/95/H130 mm -Weight: 8.1 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 6000 rpm -Power: 1 kW -Construction: B5 -Diameter shaft: Ø 24 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 500/165/H210 mm -Weight: 18 kg

Transformer, transformer, converter, three-phase autotransformer, isolating transformer, 3-phase transformer -PCB containing insulating liquid exchanged in 1998 -Input: 6000V -Output: 400V -Power: 200kVA -Type: LT -(for technical data see photos) -Dimensions: approx. 1300/800/H1600 mm -Weight: about 1000 kg