pre expander used for sale

FRICTION BELT FOR SCREW PRESS DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw presses, riveted, new! -Dimensions: 530 mm i. diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide! We confirm best service and short delivery times.

FRICTION BELT DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw press, riveted, new! -Dimensions: 530 mm i.diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide!

automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: approx. 16.5 t/h - 100 kg/m3 bulk weight: approx. 26.0 t/h Hydraulic oil tank volume: 2,100 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other equipment: Operator Panel MP 270 auto ...

Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!

Frame press Maweg Size: 400 x 240 cm hydraulic 3 vertical cylinders 2 horizontal cylinder Built in 1984 Weight approx. 2500 kg L x W x H: 480 x 110 x 270 cm The machine is in good condition, ready to use. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg

Plasma cutting system for attachment/post-training CNC cutting and plasma cutting FineFocus 800 Plus Materialstaerke: up to 80 mm, hole stitching and quality cutting up to 45 - 50 mm, Gas console type PGE 3-800 (Kjellberg) - Description of the plasma cutting source (see appendix) Year of construction: Dec. 2005 (commissioning 2006) Condition as new (new price of the plant 46,327.70 EUR) Special price: 19,900 EUR + VAT ex works Bochum-Wattenscheid plasma cutting plants FineFocus 800or alternatively as FineFocus 1600 cutting up to 160 mm (see systems) plasma cutting systems FineFocus 800 and FineFocus 800/TWIN now with PLUS technology preferably for automated and mechanized cutting in connection with guide machines and robots on all electrically conductive materials; with or without vortex gas, also under water. cutting range up to a maximum of 80 mm material thickness (materi ...

Uraca PÜV 8/200 Safety valve, bypass valve, overflow valve (pneumatic and silicone-free) similar but no Hammelmann, Woma, Kamat Ab. Operating overpressure: 50-200 bar Mpf. Flow rate: 10-125 l/min. Dimensions HxWxD: 260x113x113 mm Weight: 10.9 kg with MADER PEU-063-0010-I-P-M Built: 2012 (unused) VE water: Suitable for operation with demineralized water. Electro-pneumatic control: Takes over the switching command and the pressure adjustment of the valve. Slit seal: Serves the exact reproducibility of the response pressure. For more technical data, see data sheet. Keeps the operating pressure constant regardless of the nozzle assembly. Suitable for long-term overflow operation. Excellent dynamic behavior with rapid flow changes. Special features: Very high responsiveness, high response dynamics, cone can be used on two sides.

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but no workday & fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Whale 36/210 | 36l/min. at 210bar | Engine: Honda GX630 14.7kW Whale 43/180 | 43l/min. at 180bar | Engine: Honda GX630 14.7kW Whale 55/160 | 55l/min. at 160bar | Engine: Honda GX690 17.7kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 650x1.000x1.030 mm Empty weight without water tank: approx. 250 kg Dimensions and unladen weight with 300 l water tank: approx. 1,160x1,000x1,030 mm and approx. 280 kg Dimensions and unladen weight with 500 l water tank: approx. 1,260x1,000x1,030 mm and appr ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Salmon 60/200 and 75/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Salmon 60/200 | 60l/min. at 200bar | Engine: Vanguard 35 HP 26kW Salmon 75/150 | 75l/min. at 150bar | Engine: Vanguard 35 HP 26kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 700x1.250x1.200 mm Dimensions with 400l water tank LxWxH: approx. 1.300x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 2,000x1.250x1.200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400l water tank: approx. 320 kg Empty weight with 800l water tank: approx. 350 kg HIGH-PRESSURE PUM ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW TIER III Moses 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW TIER III Moses 30/300 | 30l/min. at 300bar | Engine: Kohler KDW 1404 26kW TIER III Moses XL 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 50/30 ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frame with forklift load suitable for installation in company vehicles. PTC Dolphin 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Dolphin 75/210 | 75l/min. at 210bar Dolphin 84/190 | 84l/min. at 190bar Dolphin 102/150 | 102l/min. at 150bar DIMENSIONS / WEIGHT: Dimensions and weight without water tank LxWxH: approx. 1,240 x 1,300 x 1,300 mm, approx. 650 kg Dimensions and weight with 500 l water tank: approx. 1,850 x 1,300 x 1,300 mm, approx. 580 kg Dimensions and weight with 800 l water tank: approx. 1,950 x 1,300 x 1,300 mm, approx. 620 kg Dimensions and weight with 1000 l water tank: approx. 2,020 x 1,300 x 1,300 mm, approx. 640 kg  ...

High-pressure cleaning device, high-pressure rinsing, high-pressure washer on hot-dip galvanized and painted high-quality steel frames with forklift slacks. PTC Tornado 60/200, 75/150, 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Tornado 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW Tornado 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW Tornado 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW Tornado 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW Tornado 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW DIMENSIONS / WEIGHT: Dimensions and weight with 680l water tank LxWxH: approx. 2.300x1.310x1.310 mm, approx. 640 kg Dimensions and weight with 1000l water tank LxWxH: approx. 2.300x1.310x1.630 mm, approx.  ...

- High pressure cleaner PTC Torpedo Eco Compact 16/200 and 21/160 similar but no Dynajet, Oertzen, Falch, DIBO, - Cold water / hot water approx. 95°C, steam 32 bar to 140°C and chemical-free weed-killing function with approx. 99°C The following models are available: - Torpedo Eco Compact 16/200 | 16l/min. at 200bar | Diesel engine: Yanmar L100N 8.5kW - Torpedo Eco Compact 21/160 | 21l/min. at 160bar | Diesel engine: Yanmar L100N 8.5kW - Dimensions and weight without water tank: 1200x930x1080mm, approx. 230kg - Dimensions and weight with 300 l water tank: 2000x1050x1100mm, approx. 300kg - Dimensions and weight with 500 l water tank: 2000x1050x1100mm, approx. 350kg Bhdw89emgf - 80/100 kW diesel burner with electronic temperature control - High pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hours - Manometer - Pressure regulator - Safe ...

- High pressure cleaner PTC Torpedo Compact 21/250, 21/350 and 15/500 similar but no Dynajet, Oertzen, Falch, - Cold water / hot water approx. 95°C and steam 32 bar to 140°C + high pressure steam up to 150°C at 200 bar (only for versions with 250 and 350 bar) and chemical-free weed-killing function with approx. 99°C The following models are available: - Torpedo Compact 23/250 | 23l/min. at 250bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23l/min. at 350bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16l/min. at 500bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 hp (high-pressure steam) | 16l/min. at 250bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 hp (high pressure steam) | 16l/min. at 350bar | Di ...

PTC Torpedo Hot Water 140°C and Steam 140°C/32bar Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... - Skid on hot-dip galvanized frames with forklift tabs. The following hot water models are available: Torpedo 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12.6kW Torpedo 23/250 | 23l/min. at 250bar | Engine: Kohler KDW 1003 19kW Torpedo 23/350 | 23l/min. at 350bar | Engine: Kohler KDW 1404 26kW Torpedo 20/500 | 20l/min. at 500bar | Engine: Kohler KDW 1404 26kW Torpedo 30/500 | 30l/min. at 500bar | Engine: Kohler KDW 2204 37.5kW - Dimensions with 680l water tank: 2,300 x 1,310 x 1,310 - Dimensions with 1000l water tank: 2,300 x 1,310 x 1,630 Bhgo2w7wfd - Empty weight: approx. 600 kg - High pressure pump: Comet RW/TW Premium - HD reel: manual or automatic with max. 1/2" or 50 m. 3/8" hose (included) - Water supply reel: manually with 50 m. 3/4" hose - Dies ...

Schubert Press The platen size is 1390 mm (52”) x 2490 mm (98”) Electric heaters Make - Schubert Daylight – 305mm Floor standing Total number of rams: 16 Ram diameter: 2 ¾” Working pressure 3500 PSI The overall dimensions are length 3850mm x width 1500mm x height 2200mm Operational The condition of the hydraulics and pump unit along with ram seals is good Spare seals maybe possible (video link available on request)

PTC CTR-C cold water trailer similar but no dynajet, oertzen, falch, ROM, Rioned, plaid, ... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following cold water models are available: CTR-C 43/180 | 43l/min. at 180bar | Petrol Engine: Honda GX690 17.7kW CTR-C 55/160 | 55l/min. at 160bar | Petrol Engine: Honda GX690 17.7kW CTR-C 60/150 | 60l/min. at 150bar | Diesel Engine: Kohler KDW 1003 19kW CTR-C 20/350 | 20l/min. at 350bar | Diesel Engine: Kohler KDW 1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 350 kg - High pressure pump: Comet TW Premium with integrated gearbox - HD reel: manually with max. 1/2" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Water tank: 400 l - Op ...

AYEL-TECH WORKSHOP PRESS TYPE WP 100 -Capaciteit 100 ton -Cilinderslag 400 mm -Werkbreedte 1000 mm -Verplaatsbaar cilinder is -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

HOT PRESS type COLOMBO REMO HPC 8 / 160 second hand WITH SOLID STEEL PLATES Heavy-duty construction Hot water heating via a electric system on the back of the machine , not any connection needed , everything is included on the machine Total Kw for heating 25 Solid steel plates size mm. 3450 x 1400 n.08 pistons diam.mm. 90 max. thrust Ton. 160 specific pressure max. kgs.5 / cm2 opening mm. 660 emergency perimeter rope overall dimensions cm. 4500 x 2000 x 2700 H weight kgs. 8500

PTC JTR-C Cold Water Trailer similar but no Dynajet, Oertzen, Falch, ROM, Rioned, Karo, ... Bhdwvn8yff - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following cold water models are available: JTR-C 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW JTR-C 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW JTR-C 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW JTR-C 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW JTR-C 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW Engine type: TIER III (Kohler) or Stage V (Yanmar) - Dimensions: 3,370 x 1,640 x 1,540 - Empty weight: approx. 600 kg - High pressure pump: HPP - HD reel: fixed and manual or hydraulic with max. 1/ ...

PTC CTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only for versions 250 and 350 bar) Trailer similar but no dynajet, oertzen, falch, DIBO, - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: CTR-H 16/250 | 16l/min. at 250bar | Engine: Kohler KDW702 12.6kW CTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW702 12.6kW CTR-H 20/350 | 20l/min. at 350bar | Engine: Kohler KDW1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 400 kg - High pressure pump: Comet RW/TW Premium with integrated gearbox Bhdwmzmvai - HD reel: manually with max. 1/2" or 80 m. 3/8" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Wate ...

AYEL-TECH WORKSHOP PRESS TYPE WP 60 -Capaciteit 60 ton -Cilinderslag 400 mm -Werkbreedte 1000 mm -Verplaatsbaar cilinder is -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

MEMBRANE PRESS type FISMA 2200 x 1300 . usata useful size mm. 2200 x 1300 cover opening and closer by pneumatic pistons volt. 380/50 with separate vacuum system

PTC JTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only with version 350 bar) Trailer similar but no Dynajet, Oertzen, Falch, DIBO, ... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: JTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12.6kW JTR-H 23/350 | 23l/min. at 350bar | Engine: Kohler KDW 1404 26kW JTR-H 20/500 | 20l/min. at 500bar | Engine: Kohler KDW 1404 26kW JTR-H 30/500 | 30l/min. at 500bar | Engine: Kohler KDW 2204 37.5kW - Dimensions: 3,370 x 1,640 x 1,540 Cxombmv - Empty weight: approx. 650 kg - High pressure pump: Comet RW/TW Premium - HD reel: manually with max. 1/2" or 100 m. 3/8" hose (included) - Water supply ree ...

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 75/150 | 75l/min. at 150bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 30/300 | 30l/min. at 300bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses XL 75/210 | 75l/min. at 210bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 84/190 | 84l/min. at 190bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 102/150 | 102l/min. at 150bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 50/300 | 50 ...

High pressure cleaner PTC CJ-1E similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 110 bar - Foerder quantity: 12 l/min. - Motor: Electric 4-pole 230V 2.2kW, 1400 1-min - Dimensions: 540 x 440 x 680 mm - Empty weight: approx. 40 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Stable plastic housing made of injection moulding - Practical holding device for gun with lance - Self-priming pumps with EASY-START equipment - Handle with brackets for the power cord and the high-pressure hose - Easy maintenance by simply removing the front panel - Large wheels (220 mm) for easy movement on steps and over uneven terrain - Manometer - Built-in professional relief valve - Delayed TotalStop - Pulsating system - Rotary switch - Thermal motor protection - Manual stainles ...

High pressure cleaner PTC CJ-2B similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 130 bar - Foerder quantity: 32 l/min. - Engine: Honda GX390 petrol 8.7kW - Dimensions: 1160 x 580 x 710 mm - Empty weight: approx. 80 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Robust steel frame - Practical holding device for gun with lance - Manometer - Built-in professional relief valve - Manual stainless steel hose reel with 30 m HD hose 3/8" + 10 m HD hose 3/16" - 2 pieces 3/8" and 1 piece 1/8" F pipe cleaning nozzles Oylbt - Pistol with washing lance and flat jet nozzle The CJ-2B is a professional mobile high-pressure cleaning device that is ideal for cleaning and removing pipe blockages for pipes 40 to 200 mm. Ideal for cleaning and removing pipe blockages of house ...

High pressure cleaner PTC Easypower XL D similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-47 l/min. - Engine: Yanmar Stage V 4-cylinder 4TNV88 diesel 53hp/39.5kW, 2800 rpm - Dimensions: 1,600 x 1,320 x 1,200 - Kerb weight: approx. 740/760 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Available as skid with anti-vibration feet or as a trolly with industrial wheels - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet dues The following models are available: Easy Power XL D 47/400 | 47 l/min. 400 bar Easy Power XL D 38/500 | 38 l/min. 500 bar Easy Power XL D 30/600 | 30 l/min. 600 bar Ea ...

High pressure cleaner PTC Easypower XL E similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-38 l/min. - Motor: IE3 Electric 63A, 3Ph-400V-50Hz 50HP/37kW, 1450 w-min or IE3 Electric 63A, 3Ph-440V-60Hz 50HP/37kW, 1750 1-min - Dimensions: 1,450 x 900 x 1,050 mm - Empty weight: approx. 450 and 550 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - Main switch, start/stop buttons, emergency stop - Operat ...

Single column - eccentric press, STANKO, K 1430 A - 100t BJ. 1985 Tech. Condition very good, - pressure: 100 t -Projection: 320 mm -Stroke: 10-130 mm -Mounting height: 400 mm -Table size: 850 x 560 mm x 100 mm -Tappet adjustment: 100 mm -Stroke: 50-53 / per min. -Machine weight: 8800 kg -Dimensions (W x D x H): 1.60 x 1.85 x 2.9 m Camshaft gear ROSS/Herion Herion valve Auxiliary brake DESCH Lutex ZB 200 Two hand release -transverse eccentric shaft and pneumatically actuated clutch / brake Komi nation -suitable for inlays in two-hand operation -secure setting -Single stroke, continuous stroke MOT testing in 04/2016

High pressure cleaner PTC Easypower L B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 200-700 bar - Foerder quantity: 13-42 l/min. - Engine: Kohler Stage V Diesel 35hp/26kW, 3400 rpm - Dimensions: 1,370 x 850 x 1,020 mm - Empty weight: approx. 260 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces of industrial wheels 350mm - Electric starter - Operating hour counter - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet dues 15° The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Easy Power L D 30/280 | 30 l/m ...

High pressure cleaner PTC Easypower L E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 400 or 500 bar - Foerder quantity: 38 or 30 l/min. - Motor: Electric 63A, 3Ph-400V-50Hz 40HP/30kW, 1450 rpm or electric 63A, 3Ph-440V-60Hz 40hp/30kW, 1750 rpm - Dimensions: 1,370 x 850 x 1,030 mm - Empty weight: approx. 280 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - 4 industrial wheels - Direct water suction by self-priming pump - Stainless steel relief v ...

High pressure cleaner PTC Easypower B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo, - Operating pressure: 500 or 700 bar - Foerder quantity: 21 or 15 l/min. - Engine: Vanguard 31 HP Stage V petrol 31hp/23kW, 3400 rpm - Dimensions: 1,000 x 820 x 850 mm - Empty weight: approx. 190 kg - High pressure pump: Comet TW 500 Premium three-plunger pump with ceramic plungers - Gearbox with 1560 1-min. pump - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces of industrial wheels 350mm - Electric starter - Operating hour counter - Stepless pressure valve made of stainless steel with EASY-START - Large water filter with maintenance-friendly filter cartridge - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet  ...

Slot boring machine Scheer L x W x H: 70 x 60 x 140 cm Weight approx. 400 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

ochdruckcleaner PTC Easypower E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet , Kärcher, Dibo, ... - Operating pressure: 300-700 bar - Foerder quantity: 15-30 l/min. - Motor: Electric 32A/63A, 3Ph-400V-50Hz 20-30HP/15-22.5kW, 1450 rpm / 1750 rpm - Dimensions: 1,000 x 750 x 850 mm - Kerb weight: approx. 180/210 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage power supply (24V) and control unit with star-triangle starter - Safety switch with thermomagnetic relay for motor protection - Operating hour counter - 4 industrial wheels 320 mm - Direct water suction by self-priming pump - Stainless steel relief v ...

Glue press Etienne Format L x B: 3800 x 2700 mm Window frame press pneumatic Weight approx. 890 kg Year of construction 1980 The press is in good condition, ready to use. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Stock# U2347-12 Used hydraulic press for removing paste/paint from mixing can. Press consist of carbon steel supporting column with height 399 cm mounted to base with dimensions 700 mm x 700 mm. Pressing head is mounted on cart which is rised and lowered by mechanical hoist which is driven by el. motor 0.37/1.5 kW, 380 V, 50 hz and is able to work up to weight range 2000 kg. Pressing head is designed for work on mixing cans with internal diamater 1100 mm. Top of pressing head is equipped with 6 clamps for mounting it on product container. Stroke of piston about 1150 mm. Piston is poweder from hydraulic device, driven by el motor 0.55 kW. Maximal working pressure up to 150 bar. Last time used in paint industry.

Manufacturer: SCHULER Model: ES2 400 T Year of manufacture: 1984 Condition: Very good Location: Rudniki - Poland Press Capacity: 400 Tons Rated Tonnage Point 12.5 mm The Height: 1018 mm Slide Adjustment: 305 mm Slide Stroke: 610 mm Bolster Size: 2743 x 1524 mm Slide Size: 2743 x 1524 mm SPM: 20 The Cushion Capacity: 70 tons x 2 pcs. The Cushion Stroke: 203 mm Main Motor Capacity: 60 KW Moving Bolster: Front Exit

Hydraulic Abkant and used stamping press, under current hydraulical embossing press / press brake, used, under power Serial / make: Hämmerle type / model: 2s 100-2050 year / year: 1978 pressing force / force: 100 t Bending length / operation length: 2050 mm tappet adjustment / ram adjustment: 150 mm Distance from plunger table / distance ram to table: 400 mm Stroke / stroke: 150 mm connection value / connected load: 11 kW weight / weight: 5,9 t

Horizontal baler Manufacturer: MEPAC Type: 30-18 Operating hours: approx. 10 Built: 2014 technical data: Pressure: 220 kN/22 to Filling opening: approx. 1,500 x 900 mm E-connector: 7.5kW 400V 50Hz, 3 Ph/N/PE Connection: CEKON plug 32A Bale dimensions: 970 x 770 x approx. 1,150 mm (W x H x L) Bale output height: 200 mm from the ground Bale weight: up to approx. 450 kg depending on material and length Machine dimensions: approx. 5900x1700x2000 mm (L x W x H) Machine weight: approx. 2000 kg Colour: light blue according to RAL 5012 Execution with: - hyrdaulian front door and - 2 pieces of hydraulic lids for closing the filling box - Binding by hand with polyester tape Description: Stable all-steel welded construction with edge profiles in a compact design. Robust electro-hydraulic, maintenance-free drive ensures easy and effo ...

pressure:1000 t stroke:800 mm total power requirement:45 kW weight of the machine ca.:97 t dimensions of the machine ca.:4500 x 4400 x 5300 m Return Capacity:40 t Main Cylinder:(d=500mm) 2 Stück :(140 x 80mm) 2 Stück speed of forward flow:40 - 110 mm/sec Return Speed:150 mm/sec Press speed (infinitely variable via PLC):3 - 12 mm/s Table size:3000 x 2300 x 200 mm Ram plate:3000 x 2300 x 1000 mm demand for oil:ca. 1300 l :210 l/min :600 sec :1500 x 150 mm Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the table at 0, 07mm/m²

pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure  ...

pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:for 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Description: Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and external Induction hardened and chromium-plated. The linear measuring rod communicates the position of the plunger to the controller. The Traverse path, the upper breakpoint And the switch point at which the press should switch from empty journey to working speed, as well as the The end position to be used can be easily and q ...

AYEL-TECH WORKSHOP PRESS TYPE 30 WPM -Capaciteit 30 ton -Werkbreedte 600 mm -Hand mat-bedienbaar -Pressure gauge PRICE IS plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

pressure:63 t table length:700 mm table width:1000 mm weight of the machine ca.:ca. 9 t dimensions of the machine ca.:4500 x 4300 x 2700 m :1 Stück stroke length max.:1200 mm daylight dimension : table/slide up:1200 mm table height:700 mm :um 1200 mm :um 45 Grad :um 170 Grad :1250 x 1000 mm table load:5 t :25 mm/sec pre-running speed:95 mm/sec return speed:80 mm/sec work speed:von 0 bis 10 mm/sec.

AYEL-TECH WORKSHOP PRESS TYPE WP 30 -Capaciteit 30 ton -Werkbreedte 700 mm -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V PRICE IS plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS

pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

pressure:20 t passage width:600 mm stroke:400 mm Weight of machine approx.:2,8 t dimensions:1960 x 900 x 2500 mm power capacity:5,5 kW table plate:600x600 mm pestle plate:500x500 mm daylight:400 mm table height over floor:850 mm :1000-20000 kg :400 mm Approach Speed:max. 100 mm/sec Pressure Speed:1-15 mm/sec :100 mm/sec :1-15 mm :S7 1200 Oil Tank Capacity:250 l