pp strap used for sale

V-belt pulley, pulley -for compressor with blades -Diameter: 620mm -Strap: 2 -V-belt width: 13 mm -Receptacle cone: 17/25 mm long -Weight: 18kg -only one piece available

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Speed: 35m/min - Strap width: 300 mm -Length: 1500mm -Rubber conveyor belt: slightly rough -Height: 870 mm adjustable -Transport dimension: 1500/470/H870 mm -Weight: 172 kg

Dough sheeter Seewer Rondo SKO 68 Product descriptionManufacturer: Seewer RondoModel: SKO 68Condition: used, functional, baker's conditionManual operationfor all doughs for rolling out and touringleft strap extendablehinghingwith flour containerwith 2 beltsright left-hand rotationon rolls, mobileBelt leftDimensions: Depth 62.5 cm, Width extendableBelt right Dimensions: Depth 75 cm, Width 64 cmOutside Dimensions: Width 200 cm, Depth 120 cm, Height 130 cm For details see pictures.

Andrin Electric Magnet Strap Brand: Andrin Length frame A.A.= 2600 mm Belt width : 1200 mm Drive: 2.2 kW slip-on gearbox Block : 1800 x 1250 x 450mm Power requirement : 7.3 kW Inclusive rectifier

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Interroll, belt conveyor type 4081 without drive -Strap width: 550 mm -Total conveyor length: 650 mm -Drive shaft: Ø 20 x 100 mm -Quantity: 3x conveyor belt available -Price per piece -Transport dimensions: 840/660/H130 mm -Weight: 33 kg/pc.

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Interroll, belt conveyor type 4081 -Speed: frequency controlled, up to approx. 150 m/min -Strap width: 550 mm -Conveying length: 655 mm -Drive: SEW-Eurodrive 0.55/0.055 kW, see photo of nameplate -Quantity: 1x conveyor belt available -Transport dimensions: 960/670/H215 mm -Weight: 49 kg

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Transnorm, belt conveyor type TS 1100 -Speed: frequency controlled, up to approx. 150 m/min -Drive: SEW-Eurodrive 0.055/0.55 kW, see photo of nameplate -Voltage: 380-500V -Strap width: 500 mm -Conveying length: 970 mm -Quantity: 1x conveyor belt available -Transport dimension: 980/685/H595 mm -Weight: 96 kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Interroll, belt conveyor type 4081 -Speed: frequency controlled, up to approx. 75 m/min -Strap width: 450 mm -Conveying length: 2470 mm -Drive: SEW-Eurodrive 1.5/0.15 kW, see photo of nameplate -Quantity: 1x conveyor belt available -Transport dimensions: 2470/850/H350 mm -Weight: 131 kg

ADIGE TT640 automatic tube cutting machine Adige saw model TT 640. Straight cuts only, for steel or non-ferrous tubes with a diameter of 15 to 80 mm. Equipped with an automatic strap loader for bars up to 6m50. Unloading for lengths 2000mm max. In perfect working order. Delivery and installation possible

Strapping Machine TP-6000CE1 Packaging MachineProduct DescriptionModel: TP-6000CE1Year of Construction: 07/2009Condition: used, functionalAutomatic, mobile strapping machineMaximum package size 800x600 mmIndividually adjustable strap tensionRobust constructionPower: 9A / 230 V / 50 HzSee pictures for details.

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Mosca, belt conveyor with adjustable base from GF strapping machine -Speed: frequency controlled, up to approx. 94 m/min -Strap width: 500 mm -Conveying length: 1000 mm -Drive: SEW-Eurodrive 0.55/0.055 kW, see photo of nameplate -Light barrier: 2 sensors, distance adjustable see photos -Quantity: 1x conveyor belt available -Transport dimensions: 1020/960/H900 mm -Weight: 88kg

Carton sealer with ink tamping and scissor strap Vin Pack + Normpack / Germany Carton sizes: Freely adjustable Year of construction 2010 - 2020 More information and price on request

Conveyor belt with cleat belt, stainless steel, approx. 3.90 m long. Strap width approx. 62 cm.

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, steep conveyor, steep conveyor, chip conveyor, chip conveyor -Conveyor belt: conveyor belt -Speed: 25 m/min -Strap width: 450 mm -Conveying length: 795 mm -Engine/gearbox: WEG OCG 532 0.08 kW -Total dimensions: 800/670/H155 mm -Weight: 23 kg

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Transnorm, belt conveyor type TS 1200 -Speed: frequency controlled, up to approx. 160 m/min -Drive: SEW-Eurodrive 0.055/0.55 kW i= 3.83, see photo of nameplate -Voltage: 380-500V -Brake: 5 Nm -Strap width: 500 mm -Conveying length: 848 mm -Quantity: 3x conveyor belt available -Price per piece -Transport dimension: 860/700/H415 mm -Weight: 62 kg/pc.

SCRAP CHOPPER The Model CE450 DDX boasts power alongside a dual driven feedworks. Driving both feed rolls on the chopper allows the unit to process scrap quickly and efficiently. The Model CE450 DDX is Sweed’s chopper of choice for companies processing large volumes of scrap plastic or PET strapping. This chopper is extremely versatile and can be customized for inline automated production applications requiring tension control and custom scrap lengths. The Model CE450 DDX is designed to fit on several Sweed stands that can accommodate a variety of scrap collection containers. Custom stands and additional safety upgrades are also available. Material Reference The recommended model of scrap chopper is determined by scrap size, scrap volume, and requested custom features. The following are materials commonly processed through the CE450 DDX. Please consult a Sweed representative to ...

Drautz caustic machine for 60x80 trays with salter. Technically inspected and cleaned the system. Total length: 3.60m. Feed strap folded up 2.50m Width 1.00m

Inv. Num. : 7235 Type: 6.5 Producer: Weber Generated: Parameters: Equipment: Calibration table ? Tow strap

Machine Type: Electrode Inverter Welding Rectifier Brand: Merkle Type LiteARC 160 Connection voltage 1 x 230 Volt Serial No. 127.931 Adjustment range 15 – 160 amps Duty cycle 25% ED at 150 amps 60% ED at 90 amps 100% ED at 80 amps Infinitely variable current adjustment max. weldable material thickness 4 mm Cooling inverter by built-in fan Design of portable assembly system Fuse protection 16 amps Dimensions L x W x H 360 x 150 x 240 mm Weight 6 kg Age 3 years Optional Accessories Carrying Strap Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece of ground cable 1 piece of electrode cable 1 piece of slag hammer, heavy-duty version 1 piece steel wire brush, 2 rows 1 piece mains plug 230 V, solid rubber 20 rod electrodes in 2.0 x 250 mm  ...

SMH Trading Company Belt Conveyor/ Conveyor Belt/ Webbing Year of construction: 2010 Manufacturer: SMH Trading Company Model: FBK 5000 x 1000 Condition: Used Colour: Dark Green/ Aluminium Total length: approx. 5080 mm Total width incl. motor: approx. 1200 mm Total width without motor: approx. 1050 mm Belt width: approx. 1000 mm Strap Type: Smooth Frame height: approx. 80 mm Material: Aluminum/ Steel Engine included Feet included (height adjustable) The conveyor system has run until it was dismantled. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, ...

Belt Conveyor/ Conveyor Belt/ Webbing Year of construction: 2010 Manufacturer: ttw-Thermo-Technik Model No: 1002229 Condition: Used Colour: Galvanized/ Green Total length: approx. 3060 mm Total width incl. motor: approx. 1040 mm Total width without motor: approx. 890 mm Belt width: approx. 800 mm Strap Type: Smooth Frame height: approx. 80 mm Material: Aluminum/ Steel Engine included Feet included The conveyor system has run until it was dismantled. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and  ...

Hazemag feed hopper with take-off conveyor Brand: Hazemag Dim. Bunker : 6800x1900/1000x1200 mm Trigger strap: belt width 1200mm, length 8M. Drive: Slip-on gearbox 1.5 kW

Key data: 150 mm, 2000 mm

Machine Type: Metal Belt Sander Manufacturer: GRIT Model: GS 150 Year of construction: 2000 Condition: very good Offer Type: Used Machine Specifications: Grinding area: 150 mm bandwidth max. grinding length 360 mm Drive type: el./mech. Propulsion: 4.0 kW Remark: Tape size: 2000 x 150 mm, 1 spare strap, 4 machine feet, Chip trap Weight: 95 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

A used drive for a conveyor belt is offered. Strap width: 94 cm 22 kW Fully functional.

NON-FERROUS METAL SORTER - with vibrating feed conveyor and magnetic drums - For sorting e.g. iron, aluminium and copper - Conveyor width 500 mm - 14-pole concentric separation drum - Sturdy PVC strap - With control cabinet, 2 frequency converters for the band and the separation drum - Color according to customer requirements - New machine made in the EU

Viara Futura 1400 mm welding machine, year 2010, complete with folding strap for higher switching, suitable for heavy bags or industrial plugs, bag thickness mm.100-4000, weldable materials ldpe/hdpe/mdpe weldable thickness: 30/400 my.Currently original Viara perforator. Replaced last month: rubber calander complete with caps, two air blowers, overhaul of the welding from the side of Viare, replaced screen for machine control, new tape for assembly, aluminium rollers available for assembly, machine prema EEC standardima, large production capacity, visible in the range, without hydraulic undercut, or with metal construction on sale where rolls can be placed, available from September

Specifications: Dosiebunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) Can be used in cable recycling for granulator filling, granulate processing, plastic films, wood chips, etc. Features -Content: 3 qbm -Ruehrwerk, drive: 5.5 KW -Fuellstand control sight glass -Adjustable machine feet -Dosing screw discharge 200 mm diameter, speed control of the screw via frequency control at the control cabinet via Poti, Drop height 700 mm, screw drive power: 0.75 KW Optional with conveyor belt for filling Dosing Bunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) For Cable Recycling by the Cutting Mill filling, PVC Granulate, PP or PPE, and many more Amenities -3 qbm -Agitator, Drive: 5.5 KW -liquid level indicator -adjustable machin feed -metering device for the spiral conveyer, Diametre: 200 mm, speed control for the spiral conveyer by Frequen ...

We have large stock of now OEM-obsolete used mechanical spare parts and electric / electronic parts for KHS, Kisters and ZVT tray- and shrinkpacking machines. Including AEG DPW 101/102, Kisters PC09 / Kisters PC20 / Kisters PC30 / Kisters PC40, and Indramat servo drives and controllers, Mayr Primo servo controllers. Details upon request. MAC 71C-0-JS-4-C/95-A-0/WI504LV/S001 MAC 71C-0-JS-4-C/95-A-0/WI504LX/S001 MAC 71C-0-JS-4-C/95-A-1/WI504LV/S001 MAC 71C-0-JS-4-C/95-A-1/WI504LX/S001 MAC112B-0-GD-4-C/180-A-0/WI504LV/S011 MAC112B-0-GD-4-C/180-A-0/WI504LX/S011 Mayr Primo 2 + am 1 type P22.004.0 Mayr Primo Compact type P21.004.0 TR Electronic AE100S / HE100S / CS100S Bosch Rexroth PPC controllers including PPC-R02.2N-N-NN-P2-NN-FW, PPC-R02.2N-N-V2-NN-NN-FW and PPC-R22.1. For most of these units we can also provide FW up- / down-load / copy service. (including on-site).

Cat.-No. 14-00218 PET line for still and carbonated beverages Format: 1.5 L, production capacity: 20,000 bottles / h in a very good condition Year of construction: 2001 working hours: 42.389 the plant built up yet, but is currently out of operation Machine manufacturer year details Blow moulding machine SIG BLOMAX 16 2001 including molding water inlet, elevator and hopper, cooler (Rahim) Molding m Tanner VZT 3000 dosing system 2001 air transporters 2001 buffer tank 14 m³ Alfa Laval 2001 short time pasteurisation KHS Innopro KZE 2001 330 HL / h Triblock (Rinser, filler, Capper) KHS Innoclean/Innofill 120/10 2001 volume filler Capsule conveyors with supply tank Filling height control HEUFT basic 2001 labeller KHS Anker 2001 label control HEUFT HBF 150000 ST 2001 laser encoder video Jet 3430 2001 shrink film Packer SMI SK 800 T 2001 tray Packer in 6 Pack film (50 ppm)  ...

Chromed cylinders, console, double sheet control, semi auto plate change, alcohol damping, technotrans recirculation and refrigeration, perfecting 2 / 2 and 4/0, Grafix powder spray, IR dryer, auto blanket ink roller washers, automatic impression cylinder washers Mitsubishi D 3000 - 4R (4/0-2/2) from 2003 A 4 colors offset printing press of size 72 x 102 cm Option; IPC (ink remote CTRL.), Mitsu. Alcohol damp. With technological TRANS recirculation & refrigeration and ink temperature control (techno TRANS BETA C), all auto. Washers, S - APC, car. Setting size and double sheet control PPC, Grafix IR dryer PERFECTOR 4/0 - 2/2, prepared for CIP connection, prepared for NON stop delivery, Grafix powder spray condition; VERY GOOD condition, ONLY 84 million impressions immediately available, can be Lakes RUNNING in our Factory Pictures at http://www.imprimerie-unal.com/p-d3000r/r1.html

CHP Schmitt enertec V12 Hi here sell a Schmitt enertec BHKW that is immediately ready for use and can also be tested prior to sale. Transport or construction is also possible. Electrical power: 300 kw with internal charge air cooler circuit 370 kw at external charging air cooler circuit Thermal power: 408 kw to 300 kw el. Required fuel: Bio-gas gas Sewage gas Landfill gas Special: Compact design in soundproofing hood with supply and exhaust air installed motor control cabinet to the frame: Engine one E2842 Leroy Somer operating hours: ca 100 Description: The CHP has been completely dismantled and rebuilt, which means the motor and generator have been overhauled. Control: PPU is by Deif SPS is by Telemecanique If you need replacement parts or have questions I am under to you provided: With friendly regards Andreas Peters Andreas Peters CHP GmbH & Co.KG Repairs of engines ...

The line consists of: -Schmidt, year of construction: 1997 -Mixer, output: 5000b / h -Filler XRB 16, year of construction: 1997 -Screw ZX01, year: 1997 -Labeller KRONES PASANTA, year: 1997 -Tunnel packaging PPX 030 K, year of build: 2006 Power: 3000 packing/h

-reliably high load capacity across the entire beam length thanks to homogeneous web material -secured component load capacity, as all of the straps are machine stress graded and load-tested -consistent product characteristics owing to high dimensional stability -multiple savings compared to squared timber due to improved load capacity combined with lower weight -Certification EN 13377 -Produced in Austria from Doka Industrie The length of the H20 smart beam varies from 2,45m until 5,90m. Costs: 5,00 EUR/rm For more information or an appointment, you can contact me at any time. Phone: + 43 664 1296830 or Email:office@berger-international.at

IPS: AOT-1; DI-1C; BA-1C; BA-2; MCU-5; CNT-2D; IBI-1; AIO-1; BA-3C; CNT-2; IBG-1; DO-1C; DIO-1C; DIO-3; PPS-BA1; IDS-2 measurement module Metronic Partly unopened original packaging and much more

Properties < b >: < / b > Used Roller converter of manufacturer Overbeck Feet to be ordered separately Condition: fully functional with traces of use Ideal for the fast material handling Expertly disassembled and packed Interroll motor roller v-belt drive maximum width 68cm packages that can be implemented to converter < b > < /b > Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data < b >: < / b > Mass of the roller length: 2000 mm Total width: 600 mm Segment length: 750 mm the role < /b > details < b > Clamping length: 450 mm Diameter approx: 50mm Length: 100mm Material: Steel, galvanised the framework < /b > details < b > Frame height: 135mm Frame width: 30mm Ma ...

2 factory-tested, well preserved double girder cranes Load capacity 5000 kg Wingspan approx. 13.630 mm Hook way approx. 4,000 mm Fabrikat MAN-SWF Year of production/workshop test 1995/2016 Cranes, floor control, freely movable equipped with SWF double girder trolleys, travels to the lower straps of the crane bridges Working speeds: Hoist approx. 0.8/5.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Properties: Used wheels car converter of manufacturer Mannesmann Demag Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed 7 STK. in stock Price per PCs. Converter Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data: Mass of the roller Overall length: 935mm Total width: 920 mm Information on the role Clamping length: 430 mm Diameter approx: 50 mm Material: Steel, galvanised Information on the framework Frame height: 135 mm Frame width: 30 mm Material: Steel Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unl ...

FOR SALE ALFA LAVAL ECOSTREAM OILY WATER CLEANING COMPLETE SYSTEM TO WHOM IT MAY CONCERN; WE VE COMPLETE SYSTEM ALFA LAVAL ECOSTREAM OILY WATER CLEANING SYSTEM AT OUR STOCK SYSTEM RUNNING HOUR IS ONLY 3HRS . IT IS BRAND NEW . , EPC 50, 15 PPM Alarm and all accessories PLS FIND DETAILS ON BELOW ALFA LAVAL ECOSTREAM ART-NO. 585420-01 AL R SA 52658 MADE IN ITALY 60 HZ FREQUENCY 440V SEPARATOR BRPX 307 TGD-71 ELECTRICAL BOOSTER EH-W25 L1500 YOB 2014 EX STOCK READY TO TRANSPORT IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH SU. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Package press and strapping system make FROMM with 19 mm Plastic tape, with timber insertion, package roller before the press, bar patrons and cross conveyors, package delivery sponsor behind the press. (Driving with and without timber is possible!) Complete control with Control Panel, hydraulic power pack. Very good condition, used little! Year of manufacture 2004

PET-/ Can Compactor, Special Waste Baler BTS-MF60hd The BTS-MF60hd Cans_PET Special Waste Baler is ideal for compacting difficult and hard materials such as plastics, cans, PET and many more. The special waste baler impresses with its ease of use and large filling volume, finished bales can be easily removed with the automatic bale ejector. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Solid bales with bale weight up to 70 kg - Compacts a variety of different materials such as PET bottles, beverage and food cans, paint cans, cardboard and plastic - Cross strapping tying system to hold difficult material in a bale - Fully automated bale ejector, simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing  ...

Strapex apparatus Plastic band seals L x W x H: 80 x 40 x 100 cm Weight approx. 70 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Technical data:- Cutting length horizontally 4000 mm - cutting height vertical 2000 mm - cutting depth 30 mm - saw blade diameter 250 x 30 mm - speed main saw blade 5800 rpm speed cracksaw blade 7800 ppm motor 3.0 kW / 400 V - suction nozzle 100 mm - twist-free, free-standing machine frame - Installation dimensions L=5000,W=1150, H=2980 mm - weight 665 kginclusive:- V-slot device for composite panels - Digital display for horizontal cuts- Digital display for vertical cuts- automatically evasive slat slat - transport rollers- continuous small part support - strip stop

Overhauled: 2018 Year of construction: 1994-2000 Blade 560 mm Engine power 6.5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100-4200 m / min Saw height control: electronic Square maximum work area: 170 x 170 mm Flat maximum work area: 300 x 150 mm Work area round max.: 200 mm Saw speed 0-40 mm / s adjustable Section length 5-950 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight approx. 1900 kg Dimensions Lxwxh 2200mm x2700mm x1950mm The machine is both technically and optically after completed retrofit in mint condition. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The programmed HMI control system ensures easy and very profitable operation of the plant. The soundproof cabin this reduces the noise emissions to a minimum. The machine will be overhauled on request in our House. Amo ...

Two hydraulic valves from Rexroth, two hydraulic pumps and 5 hydraulic cylinders are offered, all new and indispensable as spare parts 1. 2 Stueck Rexroth Valves MNR: R900912485 DBW 10 B2-52/315-6EW230N9K4 FD: 48121 2. Voac Parker Hydraulics made in Sweden Part No. 3708719 Type F11-058-M8-CF-K-000 Ser No. 2000180541 3. Brueninghaus Hydromatik D-72160 Horb A10VSO 71 DR / 31R PPA12N00 FabrNr: 1117486 Bauj. 04/96 DR = 280 bar Vo =71 cm3 n=1500 min 4. 5 unused, two-sided hydraulic cylinders with bearings Type 70/50-280-625 Length from middle hole to middle hole approx. 625mm Total length approx. 750mm Piston diameter 70mm Rod diameter 50mm Piston path 280mm Special price

We provide the following to the purchase : manufacturer Fanuc suitable for model series P-200 Shipping costs on demand with us:; Second Hand

Saw blades Carbide / HSS: 450 mm Power: 4,0 / 5,5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed (450 mm) blade: 7-43, or 15-75/min Saw height control adjustable full electronic Square 90° maximum working range: 140 x 140 mm 45° max.: Flat workspace: 90° Max: 240 x 80 mm 45° max: work area round: 90° Max: 150 mm 45° max: supplies length easy stroke: 5-2000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Approximate weight: 3600 kg Dimensions Lxwxh: 3500 mm x 1300 mm x 2100 mm Lxw surface: 3500 x 1300 mm? Technical description of 401 k PPS / PPS 451 NA 2000 retrofit 401 k PPS / PPS 451 retrofit high-speed sawing machine for steel. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free o ...

Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin.

Te Coop: Endress & Hauser geleidbaarheis meters Liquisys-M turbidity FNU-NTU ppm g/l % TEMP - 5-70

Matrix printer, continuous paper printer Manufacturer: PSi Type: PP405 Year of construction: 2011 Fully functional Voltage: 220V There are a total of 8 pieces. The price is for 1 piece All information without guarantee

For sale: USED Diane XT HMI Control Panels , 1 x PP250 & 1x PP450, USED and in good working condition email for photos and price Ex-Stock UK