power coating used for sale

Altronic Surface Coating Swiss manufacturer As good as new, very precise system ca 300 Bh Year of construction 2009 New price of the system 334.000,- € lt invoice / without commissioning was developed for the solar industry to apply wafer-thin coatings of sulfur to solar modules, here it was important to achieve exact distribution, and it had worked. equipped with 9x linear vibrators type E-PLF-0.65-IP54 Total dimensions of the coating system: 180 w x 220 t x 210 h Dimensions: approx. 130w x 160 cm incl. control and adjustment table, possibly a belt conveyor is also available Shipping: 650,00 International shipping only on request, not EU can be very different, will be billed exactly

Qty. 1 Second-hand paper coating machine Mfc.: SBL Model: HCUV-350 automatic coating machine Built: 2003 Max. sheet size: 1060 x 740 mm. Min sheet size: 450 x 360 mm. Max. coating area: 1050 x 730 mm Spot coating Speed: 7200 sh/h Automatic feeder with vacuum IR dryer for better varnish heating UV dryer with 3 lamps and cooling system delivery stacker

Ultraviolet Document Coater Coating speed 11 - 20 m/min. Max. speed 4440 sheets / hour Paper thickness/weight 120 - 350 g/m2 Min. sheet size 216 × 270 mm (A4) Max. sheet size 508 × 710 mm (B2) Automatic setting for coating rollers from 120 up to 350 g/m2. Ait fixing for low weight paper, touch control panel for the operator. Automatic cleaning system.

1 COATEMA UV-coating lamination line type SM31, year 2015, roller width 150 cm, HONLE device for UV coating, with MAHLO double sided scanner QMS Webpro-XS (O-frame) with measuring sensor/head for measurement of layer thickness The machine was bought new for a project which was not finalized and it has less than 200 working hours. Machine looks like an exhibition machine.

UV-Beschichtungsmaschine - UV-Coating machine Billhoefer Gula Speed CGS JKN 112 Year 1988 - Serial-No. 1743 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card board -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

UV-Beschichtungsmaschine - UV-Coating machine Billhoefer CPUV-112 Year 1982 - Serial-No. 9035 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card board -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test- UV-Beschichtungsmaschine - UV-Coating machine Billhoefer CPUV-

Comexi solvent-free laminating system Coating width = 1320 mm , Speed = 350 m/min, With 2 unwinders (turnstile) With 1 rewinder (turnstile) With Doypag vario mixer. Mixing plant 4 heaters Pre-treatment AFS corona type. G 60 S,

Billhöfer A-20-P Autom. Laminating unit (wet lamination and thermal lamination) Type: FK - 102 S Year: 1997 Largest sheet format X = 1020 mm Largest sheet format Y = 1140 mm Smallest sheet format X = 200 mm Smallest sheet format Y = 300 mm Max.Speed: 60 m/min. = 12,000 Bg/h -Disconnector - Depowdering station with filter and suction - Foil cutting device - Electronic overlapping system - Smoothing calender with temperature control device - Clock rollers - Double-sheet control - Electronic foil brake - Electron separation point. - Back pressure roller -Auto. Destacker

Hot Melt Coating Machine YOC 2014 Max. nut roll width: approx. 1100 mm Unwinding sleeve diameter: 70 mm - with coating stand APRO (Germany) - with 2nd portable winding, core 76 mm (e.g. for masking paper) - with Nordson barrel melter - with Frigosystem cooling system - a rewind must be added to the system! Machine "how it goes and how it stands" Self-dismantling and removal

Hot melt lamination Hotmelt Laminator Hot melt lamination line Hot melt lamination stand Hot melt coating stand Hot melt coating line Nordson BC 62 Porous Coating Coating weight : 0.85-60 g/m2 Web width : 2400mm bm 200 bulk melter tank , heated hoses, hot melt applicator, Metering gear pump station and coating head • Hot melt application gsm : minimum 0.87 gsm/m2 • Hot melt application gsm : maximum 60 gsm /m2 • hot melts: SIS/SBS, PSA,EVA,PUR based

Inv. Num. : 7289 Type: Z-4645 Producer: Surfin Generated:- Parameters: In good technical condition.

Turnkey delivery in 100 working days 2 hours drive for a reference plant, several locations in the DACH region (since 2010) Complete powder coating plant, turnkey delivery Control units from Gema, Wagner or Nordson With plastic cabins, powder center, pump conveyor, automatic guns, Siemens Simatec controls 3D scanners, according to the latest technology... and, of course, pre-treatment with nano-coating Contact us now, it's worth asking powceq com (project page) , see also video here

For workpieces up to 4m long and weighing 100kg Complete delivery, since 2010 in the DACH region Powder furnace, extraction stand for double-sided coating, upgradable with automatic coating equipment, be it Gema or Wagner POW C EQ = Powder Coating Equipment

7 meter powder furnace with partition wall at 4+3 meter 5 rails integrated With gas burner

Powder furnace hybrid, electric or heated with gas burner Tray trolley for loading +/- 3°C accurate, very homogeneous air distribution References all over the DACH region, since 2010

Powder furnace hybrid, electric or heated with gas burner Tray trolley for loading +/- 3°C accurate, very homogeneous air distribution References all over the DACH region, since 2010

PMA 650 C UV COATING MACHINE BANNED WITH SPECIAL UV SOLUTION VARNISHING PROCESS - UV LAMPS MAXIMUM WORKING WIDTH - 650 MM THICKNESS OF THE DOCUMENT TO BE VARNISHED - 0.2 - 2 MIN. VARIABLE SPEED - UP TO 7-8 M. / MIN. LIQUID RECYCLING - YES MAXIMUM CONSUMPTION 4800 W

Elec: 380 Volt 50HZ, Heating: Yes, Turbine diameter (mm): 950 mm, Turbine depth (mm): 550mm, Turbine material: stainless steel, Dimensions (mm): 1000x1500mm H 2100mm, Rotations per minute: 9 - 26, Last use: December 2020

DUMOULIN sugar coating turbine for small batches or for development. 2 tanks sold with the machine: 15 and 30kg CIP system Waston Marlow perilstatic pump Sold without its power cabinets, fan and filtration system

Mobile stainless steel coating turbine, Elec: 0.55kW 380V 50Hz, Heating: no, Turbine diameter (mm): 900 , Turbine depth (mm): 600, Turbine material: Stainless steel, Dimensions (mm): 1200 x 900 H 1800

WALTER BRUCKS coating pan Stainless steel With ventilation and electric heating Speed variation Alternating rotation, Elec: 380 Volt 50HZ, Heating: Yes, Turbine diameter (mm): 950 mm, Turbine depth (mm): 550mm, Turbine material: stainless steel, Dimensions (mm): 1000x1500mm H 2100mm, Rotations per minute: 9 - 26 , Last use: December 2020

Thank you for your interest in our used machines, which we are able to offer you as follows: Manufacturer: Sollich Model: 100F Chocolate Tempering Machine "Mini Temper" Year of construction: 1992 Masch. Nr.: 2241 Capacity: up to 80 kg/h Miscellaneous: good condition Chiller New in 2023 With the 100 F, you can keep 25 kg of couverture at a constant temperature and process it ideally pre-crystallized for several hours, or produce up to 80 kg of pre-crystallized couverture per hour. We offer this machine for sale "as is". from Hess warehouse. Lichtenau, unpackaged

Thickness gauge, coating thickness gauge -Manufacturer: PCE, thickness gauge with case -Type: PCE-CT 27FN -Measuring range: 0 - 1250 µm -Accessories: see photos -Dimensions: 250/210/H55mm -Weight: 0.7 kg

Saturn Spraying Systems mobile coating machine with 4 discs, model: Discmatic DMA 8TB, s/s mesh belt, (3x) 800 mm, clearance: 800 mm x 130 mm, total dimensions spraying machine: 1650 mm x 1500 mm x 2500 mm, dimensions in and out feed belts, (2x) 1000 mm x 1200 mm x 1350 mm, with mobile s/s mixing tub, dimensions: 620 mm x 750 mm x 1550 mm.

Manufacturer: Manesty Model: Accela-cota 150 Year : 1983 Type: film and sugar coating unit Technical file available Classification: ATEX EEx (to be requalified) Coater Useful volume: approx. 170 L Maximum weight: 150 Kg Diameter of drum: 1219 mm / 48. Rotation speed: 2.5 - 15 rpm Cabinet with frequency converter Air treatment unit Air volume: 2890 m3/h Temperature : 0-80?C Steam pressure : 2 - 5 bars Steam consumption : 145 kg/h Fan motor power : 0.75 KW Fan (not original) Power : 17,5 KW

Description: Top-maintained VENJAKOB Venspray coating systems with steel belt transport, 2 spray systems, IR dryer, airless pumps, smoothing roller, HILMER & KOCH hydraulic press and transport rollers. The system has a working width of approx. 1,600 mm and a Siemens Simatic HMI Touch Panel control. Only samples, tests and product developments were processed on the system. , Pos. 1 VENJAKOB roller conveyor angle transfer, manual removal station Pos. 2 VENJAKOB accumulation roller transport and control station Pos. 3 VENJAKOB IR preheating zone VEN DRY IR top/bottom Pos. 4 VENJAKOB spraying machine VENSPRAY with airless pump station Pos. 5 VENJAKOB IR dry zone VEN DRY IR above Pos. 6 VENJAKOB spraying machine VENSPRAY with airless pump station Pos. 7 VENJAKOB IR drying zone VEN DRY IR at the top and steel strip cleaning station Pos. 8 VENJAKOB angle transfer Pos. 9 VENJAKOB l ...

horizontal steel tank with very good inner coating (epoxy resin), food coating Volume: 45,000 l Dimensions: Ø 2.80 m × 7.70 m long Weight: 6.3 tons

This system is used for the application of PUR hotmelt using wide slot nozzle technology for coating films, paper and foams. Web width: max. 900mm, application width range: 820mm-2400mm, application weight: 30 - 120g/m². Temperature control: Via PLC, pressure monitoring head: Mass pressure sensor 0-100 bar. Motorized adjustment and automatic calculation of flow rates for 3 pumps. Head pump size: 3ccm x 8ccm (3 x 40kg/h), head motor: 3x 250W three-phase motor. Machine speed: max. 50m/min, operating pressure: 6bar, suction: Workshop side via roof approx. 2500m³/h at 1000Pa. Documentation available.

Box Width:750 Box Height:1000 dimensions of the machine ca.:1200 m2 Powder Coating Line EISEMANN very less used and in very good condition. New Price of the plant 2.600.000,- EURO Power & Free conveyor system with 250 car trains, 5-Zone Spray Pre-Treatment System, stainless steel - water drying cooling zones. 2 nos.of WAGNER stainless steel powder cabins each with ABB robots & double-automatic powder guns, as well aseach cabin is equipped with a hand-powder device. Powder Curing Oven, direct gas heated three-zone Spray cleaning equipment, Stainless Steel - Sewage Treatment Plant, Evaporator with Reverse Osmosis System & Fresh-Air Device. Opening Cross Section Areal: Width 750 mm, Height 1000 mm Technical Details: Pretreatment conveying speed 2.3 m / min. Pretreatment surface area approx. 200 m2 / h. Painting Surface approx. 120 m2 / h. Throughput of workpieces approx. 4,000 k This Powede ...

Cat.-Nr. 10-1460 in a very good condition Tecnical Details: Production Capacity: 40 boxes/minute Year of Construction: 2008 6 Cups/Tray = 240 Cups/Minute = 14.400 Cups/h each Cup 125 g Measurements: Packing Sizes – LxWxH: 698,5x168,0x1,5 mm Lid – LxDxH: 95,5x95,5x9,0 mm Cup – DxH: 92,5x42,0 mm Machine Measurements: LxWxH: 7500x7400x3000 mm Weight: approx. 6800 kg Operating Instructions available Original Price: Euro 655.000,00 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

12 cylinder diesel engine SACM-AGO, Jeumont cutter generator AC630 L4, 2,500 KVA, water-cooled, incl. control cabinets, incl. 4 large fans, incl. additional parts 1 unit complete and 1 piece (not complete) additionally as spare part carrier Year of construction is estimated

1 of used TRANSVER 180-degree Powered Belt Bend - oversized, type KR1-SP, new 1993. Operates counter-clockwise. Outside radius of frame 2.154 mm, end rollers diameter 14 + 50 mm. Conveyance height 1.250 mm (± 50 mm), inside radius of belt 1.104 mm. Belt width 800 mm. Belt speed at radius 1.504 mm 30 m/min. With SEW Variomot drive, 380V/50Hz. Color RAL 1015 bright ivory.

Powered role way with built-in Abziehquerfoerderer technical data: intended purpose: Boards length: 1 m rope number: 6 pieces impulse 1.5 kW

PSU Board NSV 56 (Grundig 44206-860.02) (Sparepart for NSV 52, NSV 54, NSV 55, NSV 56) inkl. 1 Year Warranty Exchangeprice 595,-€ with Exchange 695,-€ Dialog 1attached NSV 52 ( Grundig Nr. 9.44904-1703 FD-Nr. 6006 04 100657) Dialog 2 attached NSV 54 ( Grundig Nr. 9.44904-1203 FD-Nr. 6006 04 100678) Dialog 3 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Dialog 4 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Contour 1 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 2 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 3 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitor ...

ABB Arc Guard TVOC-2-240 Arc Flash Guard COMPLETE SET Built 2012 The new retail value for these parts is Euro 8500,- Like new, only been used for 3 years. 6x complete set available. -- TVOC-2-240 - ABB TVOC-2-240, ARC MONITOR W/HMI, 100-240VAC/DC The Arc Guard TVOC-2 builds on the well-appreciated TVOC design and offers unmatched arc monitoring. With over 35 years of experience, Arc Guard System has become an industry standard in several key markets, helping to protect personnel and businesses around the world. The TVOC-2 is an optical detection system that together with an external breaker can limit the damage done to personnel and equipment in case of an arc accident happening. Main benefits Increased safety to personnel and equipment Minimizes downtime after arc accident has happened Easy-to-read interface makes reading status information quick and easy Simp ...

Hydraulic pump 250 BAR 1, 1kW three phase motor, 3ccm/& 8 l container with valves and tray, ready for use. Info under 0170 / 2204056 Mail to fa.raupp@t-online

Energy chain including covers, closed, can be opened. Black dimensions 75 x 55. Unused mint condition! 10 mtr. present a ´ mtr. 29.-NET Very high quality see photos! 0170 / 2204056 Info Mail fa.raupp@t-online

Sell used hydraulic power units 5. 3 with 11 kW electric motor- 2 with 4 kW electric motor- Price per PCs. Motors from ASEA Sweden

PCA Senertec heating oil system used with 32000 hours of operation System until the very end in operation Regulator in MSR1 Performance increase Power 5,3 kW thermal power 10,5 kW

Power supply Siemens 6EP1437-1SL11

CHP 60kW of electric power with approx. 108kW of thermal performance Compact system with enclosure and Cabinet mounted on the system. incl. power factor correction and emergency cooler.

We sell a used natural gas cogeneration manufacturer spilling, type power Therm with an electrical output of 20 kW.

Piston diesel operation - almost new

Power supply ABB PS24-Ex SA910S new, original packed Manufacturer: ABB Type: PS24-Ex, SA910S Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 3 months after purchase you can return the goods and we will refund the purchase price.

technical data

no further information

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

Plasma cutting system / power source Manufacturer: Kjellberg Type: PA-S47 CNC Year of construction: 1994 Cutting power: 40-130 A Quality section: 35 mm Cut: 45 mm Gas console: PV-S75W-1 without hose package .

Manufacturer: Solar Turbines INC, San Diego USA Model: Taurus 60 with Solonox combustion, Packager: Turbomach Version: T 7301 Yoc package: 1998 Turbine engine: new engine installed in 2012, only few hours since installation Condition: fully serviced and ready for start. Capacity: 5200 kW Speed: 14.944 U/min continual Fuel: Natural Gas and Light Diesel (dual fuel) Fuel consumption: 122.469 kJ/kWh Burners: 12 Start system: electro.hydraulic, 90 kW Outlet temperature: 486°C Exhaust gas: 21.244 kg/s