We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,266 used machines on RESALE, but how to find them? Machine Search
used
Chromium Plating Technology The Modern chromium plating technology. The year 2009 and is in service since then in single-shift model. The type of chromium is hexavalent. The line is equipped with automatic transport system for moving of girders among the tanks within the line lengthways and crosswise. There is as well a powerful ventilation system installed above the production line. The Basic purpose of investment is chrom plating of towel radiators of various types and dimensions. The Average quantity is 2 pcs. of radiators per girder. The Maximum product size for application is 2.000 mm in length, 1.400 mm height and up to 250 mm width. Capacity The planned capacity of the technology in two work-shifts is about 25.000 PCs. Per year. The cycle time per girder achieves 12 minutes. There is as well a possibility of capacity increase due to installing of additional chemical tanks with ...
used
Used Syrup Room A DUE SYRUP ROOM 1999 The syrup room is in excellent condition almost new barely used Components One Sugar dissolving tank with pasteurizer and filtration One Sugar loading screw conveyor Two 10 000 L tanks Two 20 000 L tanks One Tray One walkway connecting silos One Pasteurizer 2500 l h ONE DISSOLUTION TANK 10 000 L capacity the tank is composed of the following components 1 Conical manhole top cover 2 Pasteurization and filtration system for sugar solution 3 Central cylindrical plating 4 Cone shaped bottom 5 Square support feet 6 Vertical agitator group 7 Supply pumps ONE LOADING SCREW ELEVATOR 12 000 kg h flow loading screw to be used to load crystalline sugar It is composed of Hopper Easel Loading screw Motor gearmotor group Protective grid ONE PASTEURIZER 2500L h Pasteurizer made of AISI 316 and 304 steel components 1 Plate heat exchangers 2 Thermoregulator tool 3 Fl ...
used
S1 - insulated 40,000 litres steel tank, aboveground storage tank, cased in zinc plates, heating coil inside, on 2 steel bases, former palm oil tank, good condition. Details of the tank: Contents: approx. 40 m³ / 40,000 litres material: stainless steel tank length: 9,00 m diameter: approx. 2.70 m incl. insulation / 2.50 m without insulation insulation: mineral wool approx. 10 cm, with zinc plating other: heating coil inside, single-walled The container is used, emptied inside and has been cleaned professionally. According with the age there are traces of use. This steel tank / container can be used as a storage tank for whey, vegetable oil, water, liquid food, many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. ...
new
Semi-automatic metal band saw Capacity round: 330 mm - Horizontal powerful band saw machine, ideal for regular intensive use on harder metals such as iron and steel - Two-way miter cut (from 0° to 60° left and 45° right) - Infinitely variable belt speed due to INVERTER from 20 to 105 m/min - Hydraulic vice - Replaceable work table - Cast iron saw frame on double cone bearings and ring nut for more stability - Precision band saw guide with carbide pads, bearings and corrosion protection - Limit switch for adjusting the saw frame return directly above the material to be cut - Automation is controlled by a safety relay - Low work table for easier loading of heavy materials - Solid cast iron vice with handwheel and quick-release lever - The vice is equipped with a practical handle for fast movements and mounted on a rail to allow lateral displacement - Control is via a mob ...
Qty. 1 Second-hand bonder line Bondern is a process for the surface treatment of metal surfaces and for producing a conversion layer by phosphating. It serves to protect against corrosion. In further processing steps such as deep drawing, the phosphating created serves as a sliding layer. Mfc.: TBA Built: TBA Strip width: 250 – 600 mm Thickness: 2.0 – 4.0 mm De-coiler ID 500 mm OD 600 – 1900 mm Coiler ID 500 mm OD 600 – 1580 mm Plating Double sided: 1.0 – 4.0 g/m² Single sided: 2.0 – 5 g/m² Note: 3 g/m² = approx. 2 µm layer thickness
used
Bezel moving with, bezel, steady rest, lynette -Max. Passage: Ø 70 mm -Plating: brass -Hole spacing: 295 mm -Tip height: 135 mm -Weight: 4 kg
used
Working width: 300mm, workpiece thickness: 0.5-150mm, weight: 800kg, operational hours counter: 1164h, suitable for sanding square tubes, for decorative finish or as preparation for chrome plating, sanding flat material, satin finishing and roughening, with Extraction Absaugung ULMATEC UT-N3.
used
Leventi ME 1.06 BDI, New condition combisteamer, Following information found on the official Leventi ;, - SmartChef ® – your automatic cooking pilot, - CookTablet ® – Digital Control System, - BlueCycle ® – fully automatic cleaning system, - GreenLabel ® – socially responsible and economical, -, Technical specifications:, - Width: 899mm, - Height: 827mm, - Height (incl. base): 1824 mm, - Depth (excluding door handle): 831 mm, - Weight : 150 kg, - Connection : 3 x 380V (optional 3 x 230V), - Connection value : 9 kW / 13 A, - Water supply : 3/4” outside, - Water outlet (diam.): 50mm, -, General Features:, - CookTablet Android Touch Control, - Memory for 500 programs (15 steps), - BlueCycle cleaning system, - Cool down manually or automatically, - Automatic moisture pulsation, - RackTimer, - HACCP logbook, - Automatic service diagnosis, - Steam: direct injection, - Air Reverse ...
used
FANUC M-710iC/50 robotic welding machine is used to perform the pad welding process – coating the surface of molten workpieces with a layer of powder, in order to complete defects in the workpiece or to give it new features. The robotic welding machine includes: – FANUC M-710iC/50 robot – COHERENT HighLight D-Series 10kW laser head – COHERENT HightLight 10000D laser head controller – THERMACH INC. AT-1200 POWDER FEEDER powder feeder unit – RIEDEL chiller PC 321.2H6LE.I – rotary table, consisting of TAKOMAT RT400 turntable and FANUC motors The FANUC M-710iC welding robot is distinguished by its robust, completely water- and dust-resistant body and its compact dimensions, which allow it to be installed in any position on a limited amount of space. All this, combined with high axial speeds and a reach of 2050 mm, makes the FANUC M-710iC/50 robot perform perfectly w ...
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 90 mm -Plating: brass -Hole spacing: 340 mm -Tip height: 200 mm -Drawing with the photos -Dimensions: 400/260/H430 mm -Weight: 26 kg
used
Carbon electrode, rod electrode, cutting electrode, 50 pieces PAGUS 1/2 x 18 inch Diameter: Ø 13 mm ( 1/2 inch ) Length: 455 mm ( 18 inches ) Quantity: approx. 5.1 kg with copper plating ! New ! Dimension ( packaging ): 460 x 120 x 110 mm
used
-the baking surface: widht is 210cm height is 22cm length is 2100cm, -oven ext. dimension aprox is 300 x 2100 cm - PLC controler - stanless steel plating -steam device -dismantled
used
Packaging machine for various areas in the GRANULES category: Food - snacks, peanuts, sweets, chips, dried fruits, cookies in general, etc. Automotive - small parts in general. Current setup for packages from 30g to 60g. Possibility of packing larger volumes with the acquisition of a hopper for setup. Productivity: 40 to 60 packs per minute. Description: Vertical packaging machine made of stainless steel and carbon steel parts with zinc plating. Front, side, bottom, upper protections and moving parts manufactured in compliance with NR-12. 10-head scale coupled to the machine, product supply conveyor, output conveyor, electrical panel in compliance with NR10. Configured with Schneider PLC and HMI Touch Screen with color screen where controls and functions, production and storage of data and recipes are managed. Equipment Voltage: 220v, Three Pha ...
used
Tenon mills in perfection A video of the running machine can be sent on request. Program 1: Set-up operation Program 2: Manual milling Program 3: Straight or oblique pins up to 60 degrees with chamfering and starvation Program 4: Flattening, e.g. for corner and ridge blades Precise adjustment options and precise positioning by laser Special milling head with milling ring for plating, chamfering and tenon milling High-torque 6kW motor with automatic motor brake Feed control for hardwood use 3m stop profile with scale Tenon milling at right angles up to approx. 500 x 250mm Ideal machine for carpentry, timber construction, half-timbered houses, carports and pergolas Suction connection 2 x 100mm Protective curtain automatically opening and closing Hood lock Kill switch CE mark Includes instruction manual and comprehensive on-board tools Original paint, only dabbed ...
used
Bezel moving with, bezel, steady rest, lynette -Max. Passage: Ø 80 mm -Plating: brass -Hole spacing: 210 mm -Tip height: 135 mm -Weight: 8 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 200 mm -Plating: brass -Tip height: 230 mm -Drawings with the photos -Price: per piece -Number: 1x available -Dimensions: 530/200/H740 mm -Weight: 100 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 210 mm -Plating: brass -Tip height: 280 mm -Drawings with the photos -Price: per piece -Number: 1x available -Dimensions: 570/75/H645 mm -Weight: 33 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 140 mm -Plating: brass -lower quill is missing -Tip height: 230 mm -Drawings with the photos -Price: per piece -Number: 1x available -Dimensions: 510/480/H110 mm -Weight: 22 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: 130 mm -Plating: brass -Hole spacing: mm -Tip height: 95 mm -Drawings with the photos -Price: per piece -Number: 2x available -Dimensions: 380/350/H110 mm -Weight: 15 kg
used
Chrome Bath / Galvanic Surface Coating Chrome Bath / Galvanic surface Coating Galvanic chrome plating Complete system Manufacturer: Galvabau Year of construction: 2015 Power supply: 3x 400 V AC, 35 KVA Vertical chrome plant consists of : - Chrome bath 992mm x 3665mm - Diligence Rinse 1 Cascade - Diligence Sinks 2 Cascade - Chrome expansion tank ( includes heating cooling ) - Rectifier 15V / 8000A - Repolar - Refrigeration units ( MTA Aries 33 Kw) - Cooling water tank with heat exchanger 3000 liters - Control cabinet (Vipa 313, Siemens touch display...) Works flawlessly, carefully removed, cleaned, neutralized & packaged. All documents such as safety instructions, area of application and performance data, functional description, maintenance and repair, component parts list, drawings, electrical diagram, transmitter settings, certificates, component documenta ...
used
Automatic EPS pre-expander This listing includes : 1. Automatic EPS batch type Pre-Expander - Density:7~30kg/m3 - Touch Screen Panel âSCHNEIDER - PLC System âSCHNEIDER - Screw Conveyor and Fluid Drying Bed Model: PSF90 Barrel Diameter: 900mm Effective Volume: 0.6M³ Steam Pressure: 0.4-0.5Mpa Compressed Air Pressure: 0.6-0.8Mpa Production Capacity: 10g/l=100kg/h, 15g/l=200kg/h, 20g/l=330kg/h, 30g/l=400kg/h Foaming Density: 8-30KgKg/m³ Density Tolerance: â¤3% Installed Power: 4.5kw External Dimensions: 1600 x 1900 x 2500mm Installed Weight: 1000kg Other Features : - Chromeplate makes non-adhesion of the bearing. - The solid bearing is made of heated steel. - The heating treatment bring the steel a high strength, non-deformation and high resistance to the expansive force from high-density products. - Density:7~30kg/m3 - Density tolerance: no more than 5% ...
used
Transformer Galvanic MUNK Transformers 8V / 2000A Transformer as good as new, works perfectly For zinc or chrome plating immersion bath, etc... Input: 3x400 V / 40 A Output: 8 V / 2000 A Cooling Type : Water Weight : approx. 550 Kg Loading onto trucks
new
: neu : 2022 : 2481 : prompt, Zwischenverkauf v : 2130 € : 1917 € : 1 : 2000 x 1000 mm : 850 mm : 450 kg : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjust ...
new
: neu : 2513 : Februar 2024, Zwischenver : 6998 € : 6298.2 € : 130.37 € : 3000 x 1500 mm : 850 mm : 8000 kg : 1544 kg : 200 mm : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Differ ...
new
: neu : 2023 : 2499 : prompt, Zwischenverkauf v : 3091 € : 2781.9 € : 1 : 1500 x 1000 mm : 850 mm : 8000 kg : 541 kg : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot va ...
new
: neu : ca. 6-8 Wochen ab Auftrag : 10805 € : 9724.5 € : 201.3 € : 4000 x 2000 mm : 850 mm : 8000 kg : 712 kg : 200 mm : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot ...
new
: neu : ca. 6-8 Wochen ab Auftrag : 1367 € : 1230.3 € : 1000 x 1000 mm : 850 mm : 450 kg : 25 mm : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and ...
new
: neu : 2515 : Februar 2024, Zwischenver : 4699 € : 4229.1 € : 2400 x 1200 mm : 850 mm : 8000 kg : 945 kg : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants avail ...
new
: neu : ca. 6-8 Wochen ab Auftrag : 1634 € : 1470.6 € : 1500 x 1000 mm : 850 mm : 344 kg : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with ca ...
new
: neu : 2023 : 2492 : prompt, Zwischenverkauf v : 3652 € : 3286.8 € : 1 : 2000 x 1000 mm : 850 mm : 8000 kg : 712 kg : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot var ...
used
Moving steady rest, moving steady rest, steady rest, lynette -Bezel: traveling -Top height: approx. 192 mm -Plating: brass -Dimensions: see photos / technical drawing -Quantity: 2x bezel available -Price per piece -Dimensions: 220/60/H325 mm -Weight: 2.4 kg/pc.