We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,316 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
used
used
- Engraving pitch bottom plate: approx. 5 x 5 mm - Engraving depth bottom plate: approx. 1.45 mm - Sheet thickness: approx. 1.5 mm - Top/bottom plate connection shaft: approx. 16 mm - Collar radius: 96.5 mm
used
all stainless steel belt width 640 mm natural gas 16 kW 414 kW heat capacity 3 x 400 V gas pressure 30 mbar
Qty. 1 Second-hand plate saw Mfc.: Mayer Model: PS3 E Built: 1989 – new electrical panel in 2010 Plate dimensions: Length: 3100 mm Thickness: 70 mm Saw Motor power: 11 kW, 2890 RPM Blade dia.: 350 mm Blade tension: Hydraulic Footprint: 5700 x 7500 mm –W x L Lubrication: Micro-spray ACCU-LUBE
used
KF Pasteuristationsanlagen Capacity 6600 liters per hour Control technology of the revised 2007 -Full documentation -Fully serviced
used
6 departments 1 x steam, 1 x hot water, 2 x product to product, 1 x cold water, 1 x ice water Performance 8,000 litres / hour Clip seals total 423 plates Material of plates AISI 316 (V4A), thickness 0.8 mm
used
sell used 60 he Pall diatomaceous earth-EK layers filter with 100 EK layers and 21 frames of diatomaceous earth
used
Size: 3,000 mm x 1,200 mm -no attacks -without pressing cylinders
used
Fryer Meyn 600-5000 TH -Thermal oil -Double stack -Sediment scraper
used
Length: 600 mm Width: 300 mm
used
2pcs 3250 x 1885 x 400 mm
used
6 pcs 6400 x 1885 x 400 mm
used
Plate bend Ingkant SM 52; cleaned and tested; Table equipment; suitable for Heidelberg SM 52 plates. Plate bender SM 52; good condition; cleaned and checked; table top model; used for Heidelberg SM 52 plates.
used
Printing plate bending for Heidelberg SM 52 Beil PB-S 52; good condition; cleaned and tested; Stand-up device; suitable for printing plates Heidelberg SM 52. Plate bender for Heidelberg SM 52 Beil PB-S 52; good condition; clened and checked; used for Heidelberg SM 52 plates.
used
Printing plate development machine Koenings KTW 653; good condition, cleaned and tested; 3 brushes; inlet width 650mm; suitable for waterless panels. Plate processor Koenings KTW 653; good condition; cleaned and checked; 3 brushes; width 650mm; Used for waterless plates.
used
Technical details Cutting width= .40 - .000mm Machine weight approx.: 640 kg Room requirements LxWxH approx.: 1800 x 1350 x 1920mm The machine was little needed, very good condition Extract from the manufacturer Infosheet: Technical data > For single to medium series productionâ Maximum cutting depth: 40mm The machine is in a very well maintained and very good condition and can be visited at any time under electricity by appointment. Subject to changes and errors in the technical details and information provided. Round cuts from 40 to 1000mm - size II Round cuts from 40 to 1500mm - size III The machines P 2000 II and P 2000 III are stand machines in a stable steel construction. They cut cleanly, dimensionally, with a straight cutting edge all cutting-edgeable materials: such as rubber, felt, cardboard, plastics, fibres, graphite with and without inserts, et ...
used
6pcs of Skoda floor plates 6400x1885x400mm pirce 12000eur/pc 4pcs of Skoda floor plates 5600x1885x400mm price 10500eur/pc 2pcs of Skoda floor plates 3200x1885x400mm price 6000eur/pc
used
2pcs 3500 x 2000 x 350 mm
used
GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 100 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 83 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x Flange DIN 11851 (milk pipe thread) Number of plates: 10 Last refrigeration/heat medium: water-glycol mixture Seals: EPDM
used
GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Built: 2007 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 150 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 88 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x DIN 11851 (milk pipe thread) Last heat medium: steam Seals: EPDM
used
GEA plate heat exchanger VT10 CDS-16 with 10 plates in very good condition Built: 03/2006 Min/Max permissible pressure: 0 bar / 10 bar (both sides) Min./Max. permissible temperature: -10 °C / 100 °C Test pressure: 13 bar Volume: 3.0 / 3.3 L Kerb weight: 133 kg Width: 290 mm Height: 920 mm Depth: 570 mm Refrigeration/heat medium: propylene glycol Connections: 4x Pipe nipple DN 50 Device can be inspected at any time in 76694 Forest upon request.
used
Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.
used
Duck plate stacker G+J Platestacker 85; good condition, cleaned and tested; Working width 850mm; with plate trolley. Platestacker G+J Platestacker 85; good condition; cleaned and checked; working width 850mm; with plate trolley.
used
Plate punch Beil 780 S-H-APL-CTP-p; pneumatically; Punching 780mm Autoplate; puncture 11mm; suitable for MAN 700; compressed air required. Plate punch Beil 780 S-H-APL-CTP-p MAN 700; pneumatic; punch size 780mm autoplate; depht 11mm; used for MAN 700; Need pneumatic air.
used
Alu clamping table - clamping block Offer number: 18285 Make: xxxxx Type: xxxx Machine Number: 18285 Built: xxxx Technical data: - Plate surface well preserved - Length approx. 1540 mm - Width approx. 1540 mm - Height approx. 410 mm - Plate thickness 20 mm - 6 pcs screw-on - bars 50 x 20 mm - various holes partly with thread - Intermediate bars between the upper plate and under the support surface - 4 towing eyes - Weight approx. 180 kg
used
M. No.: 3463 / 18 (91.144.1301/021) Max. Format: B1
used
M. No.: 458/08 (C.2.144.1301/02) Max. Format: B1 Voltage : 100-240V // 300-330VA // 50/60Hz
used
Electrical magnet size 1000 x 300m 110 volt supply IP 66
used
Printing plate punch/lacquer plate punch for Heidelberg XL 145/162; good condition; cleaned and tested, perforation 1200mm autoplate. Plate punch/ plate punch for varnish plates for Heidelberg XL145/162; good condition; cleaned and checked; hole size 1200mm autoplate.
used
Used Electromagnetic clamping plate , from ABA grinding machine Technical data: Length: 600 mm Width: 300 mm
used
Aluminum plates, construction aluminum, price -70%, according to photos, , used We have many aluminum plates with different dimensions. See photos Special price The current purchase price of a new aluminium plate is € 11 to € 14/kg excl. VAT. The selling price of the used plates is € 4 /kg, i.e. -70% A) 1110 x 1100 x 20mm thick, 65 kg B) 1118 x 1100 x 20mm thick, 65 kg C) 1000 x 750 x 20mm thick, 40 Kg machined D) 1000 x 750 x 20mm thick, 40 kg E) 500 x 400 x 25mm thick, 13 kg F) 500 x 400 x 25mm thick, 13 kg G) 1100 x 630 x 40mm thick, 75 kg H) 1360 x 840 x 30mm thick, 76 kg i) D1800/D150 x 25mm thick, 163 kg machined J) 1300 x 1150 x 25mm thick, 85 kg K) 1030 x 840 x 25mm thick, 55 kg L) 890 x 630 x 20mm thick, 30 kg If you have a VAT number, we will be happy to issue you an invoice without VAT. Used The panels come from a dismantling of high-qualit ...
used
Sheet filter, Plate Filter SEITZ ORION-C 60 with hydraulic pressure UNI-29-500 Manufacturer: SEITZ Type: ORION-C 60 Measurements: Length: 3300 mm Width: 1000 mm Height: 1300 mm Filter plates: Stainless steel plates V2A 2 x end plates 32 x sheet plates 60 x 60 cm Operation manual available!
used
TECHNICAL SPECIFICATIONS Manufacturer: HENKE Designation: Production plant for concrete block slabs Type: UNI 2000 Year of construction: 1995 Operating hours: 11,543 h COMPOSED OF: Item 010) Fully automatic rotary table top pressure press UNI 2000/600/7 Item 020) Attachment distribution device for fine-grained attachments Pos. 030) Fully automatic dividing disc dosing unit with 8-fold ejection Item 040) Fully automatic direct washout system "WESER 100/2" for flat laying (horizontal) Item 050) Moulding frame device 400 x 400 mm, 2-fold Pos. 070) 2 x chain conveyor 1.50 m long Item 080/120) Pallet destacker Item 090) Cleaning brush Item 100) Pallet oil roller Item 110) Intermediate transport Pos. 130) Plate removal device Item 160) Stacking arm with bearing block Item 170) Chain conveyor 5 m long Pos. 180) 2 x Plate Pack - Lifting Item 190) Parcel push-off device ...
used
Plate plate made of cast iron with longitudinal grooves and mounting holes, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12. - 4 plates with dimensions 3,000 mm x 1,200 mm x H 300 mm.
used
used
Clamping plate 5,000 mm x 2,000 mm x H 400 mm made of cast iron with 10 pieces T - grooves with 35 mm width, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12.
used
Clamping plate 5,000 mm x 1,980 mm x H 300 mm made of cast iron, with 6 pieces T - grooves with 35 mm width, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12.
used
Plate circular saw Finesse vertical Format 510 x 205 cm 2 seed units (1 x horizontal, 1 x vertical) L x W x H: 620 x 260 x 100 cm Weight approx. 700 kg Built in 1975 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Clamping plate, plate field, grooved plate -Clamping plate: grooved plate -Length: 310mm -Width: 310mm -Plate height: 65 mm -Weight: 44 kg
used
used
Printing plate development machine Agfa Elantrix 125 HX; good condition; cleaned and tested; Inlet width max.1250mm, min.200mm; Plate length max.1500mm, min.315mm; Plate thickness 0.15-0.50mm; Cooler. Plate processor Agfa Elantrix 125 HX; good condition; cleaned and checked; max plate width 1250mm, min.200mm; max.plate lenght 1500mm, min.315mm; plate thikness 0.15.0,50mm; cooling unit.
used
Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 458/273 mm -Height: 21 mm -Delivery of: steel/stainless steel cover plates possible -Weight: 3 kg
used
Thermal Plateprocessor Manufacturer: AGFA Model: Elantrix 125 SX year 2016 (incl. AGFA Amigo KIT) Price: on request
used
Control cabinet, distribution cabinet, control cabinet, TS modular cabinet -Mounting plate for: control cabinet -Dimensions: 1895/500/22 mm -Weight: 28 kg
used
Pneumatic plate punch INGEKBA Rapida 142; good condition: perforation 780mm autoplate; investment contact; compressed air required. Pneumatic plate punch KBA Rapida 142; good condition; punch size 780mm autoplate; feeder control; Compressed air needed.