plastic closure used for sale

Key data: 500 kN, 25 g/PS, 18 mm

Cleaned, tested, repaired machine, ready for production. 50 tons clamping force, 320x320 column spacing. 18 screws, 25 cm3 injection volume. 1 core puller, 1 air circuit. The display language is German or English. The handbook is in German. The machine is in very good condition, it can be viewed during operation. A video of his operation was also made. Check out our other ads.

Key data: 4800 kN

Length x width x height of the machine: 8.6 x 2.0 x 2.1 m Machine weight 23000 kg Accessories: Yudo-Star Sigma 1500 Industrial Robot

Key data: 7000 kN

Length x width x height of the machine: 8.3 x 2.5 x 2.5 m Machine weight 32000 kg Accessories: Yudo-Star Sigma 1500 Industrial Robot

Key data: 250 kN, 22 mm

Article number: 27-06-304 Manufacturer: Arburg Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1985 L x W x H: approx. 2700x1200x1800mm Weight: approx. 930kg Closing side: Clamping force: approx. 250kN Holm dimension hxv: ca.221x0mm Plate size hxv: approx. 342x250mm Installation height min: ca.150mm Installation height max: approx. 300mm Plate spacing max: approx. 500mm Aperture travel: approx. 200mm Spray side: Screw diameter: approx. 22mm Displacement: approx. 38cc Injection pressure: approx. 1500bar Other accessories on request Price and other technical data on request

Key data: 1500 kN

Ferromatik Milacron Magna T(MTs) 150-450 / production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 45 mm Spray weight: 215 g Injection pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tie bar spacing: 510x510 mm Size of clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Controls: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter Central lubrica ...

Key data: 550 kN

Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All of ...

Key data: 4200 kN

Demag Ergotech Concept 420/810-2300 with the Sepro Success 33 robot Year of construction: 2006 Injection unit: Screw diameter: 60 mm Spray weight: 800 g Injection pressure: 2420 bar Dosing volume: 891 ccm Clamping unit: Clamping force: 420 t Tie bar spacing: 800x710 mm Size of clamping plates: 1200x1100 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC 4 Additional equipment: Machine in very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the movable plate x 2 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the fixed plate x 2 Hot runner control x 18 Injection unit hardened - Bimetal Central lubrication Parallel Movements Built-in print quality control system from Sensor Kistler - tool pressure measurement  ...

Key data: 5000 kN

Arburg 375V 500-100 / Vertical injection moulding machine with rotary table Year of construction: 05.2012 Injection unit: Screw diameter: 20 mm Spray weight: 29 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 0x0 mm Size of clamping plates: 504x424 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Tie-bar-less machine Operating hours: 30,000 h in automatic mode Hydraulic core pull x 1 Hot runner control x 6 Injection unit hardened - Bimetal Turntable diameter: 900 mm Self-closing nozzle Built-in quality control system Infrared Protective Curtains Metrics: Weight: 3380 kg Length/Width/Height: 2.52x1.47x3.25 m Drive: Pumps/motor: 18 kW Heating capacity: 4.9 kW Total power: 22.9 kW All offered machines are st ...

P409 - used approx. 25 m³ / 25,000 litres HDPE tank, plastic tank, double-walled, flat bottom tank. technical details: capacity: approx. 25 m³ / 25,000 litres material: HDPE tank, plastic tank manufacturer: Formoplast specific weight: min. 1.55 kg/L dimensions: approx. Ø 3.49 m × H total 4.50 m test mark: PA-VI 321.103, DIBT and media list available, AHL/ASL listed Miscellaneous: Used HDPE tank in good condition, cleaned inside, uncleaned on the outside. Above-ground storage tank for outdoor use, standing on a flat floor, double-walled, lid on top of the roof, several inlets and outlets. Only the tank itself is being sold, without attachments such as pipes, fittings and accessories. This container can be used as a storage tank for many different media. Former tank for 40% ironIIIChloride, DIBT and media list available. Sulfuric acid tank, hydrochloric acid tank, bleach ...

Key data: 35 kN

SUMITOMO SD35E 35Ton Injection Molding Machine The high-speed injection molding machine for all challenges Manufacturer: Sumitomo Model No.: SD35E 35t Plastic Injection Molding Machine Clamping force: 35 t Power: AC 200V, 30V, 125A Inverter: 21A Heating power: 4.8 KW Weight of the injection compound: With the built-in extrusion screw approx. 100g Included: DRD III Yushkin high-performance robot Year of manufacture: 04/2000 Condition: At the time of shutdown, the machine was in perfect condition while CD production was running There are 2 identical machines available, the price is per machine The machine is currently still tied up in our customer's factory in Bielefeld and will be handed over to our customer due to a restructuring of the production processes. We sell the assets on behalf of our customers. The offer prices are to be understood as net prices in EURO ex  ...

Transport belt with s/s frame and plastic belt, belt width: 390 mm, total dimensions: 3000 mm x 930 mm x 1250 mm.

Transport belt with s/s frame and plastic belt, belt width: 550 mm, total dimensions: 3250 mm x 900 mm x 1400 mm.

90° curve conveyor, plastic belt, belt width: 260 mm, total dimensions: 3900 mm x 1300 mm x 950 mm.

Transport belt with s/s frame and plastic belt, belt width: 500 mm, total dimensions: 2500 mm x 970 mm x 800 mm.

Mobile press for cheese and tofu, 20 plastic forms, form dimensions: (2x) Ø 200 mm x 70 mm, total dimensions: 2440 mm x 400 mm x 1490 mm.

Transport belt with s/s frame and plastic belt, belt width: 180 mm, total dimensions: 1950 mm x 800 mm x 870 mm.

Mobile elevating belt, plastic belt, belt width: 370 mm, elevating height: 900 mm, total dimensions: 8300 mm x 800 mm x 1000 mm.

Key data: 1600 kN, 359 g/PS, 50 mm

Machine in good condition, dry, clean, ready for production. The pump is quiet and the injection molding is precise. Everything works perfectly. With 2 core pullers and robot connector, with quality control program. Please see my other ads.

Elevating belt, s/s frame, plastic mesh belt, belt width: 305 mm, elevating height: 1070 mm, total dimensions: 10200 mm x 400 mm x 1080 mm.

Deca Technic mobile pressure roller, plastic roller, roller width: 380 mm, plastic mesh belt, belt width: 340 mm, total dimensions: 1020 mm x 800 mm x 1720 mm.

S/s mobile S-shaped conveyor, plastic mesh belt, belt width: 400 mm, total dimensions: 6200 mm x 1600 mm x 1100 mm.

7 aluminium racks, 4 plastic floors, dimensions: (1x) 745 mm x 575 mm x 1760 mm, (3x) 970 mm x 575 mm x 1760 mm, (3x) 1250 mm x 575 mm x 1760 mm. Including spare parts.

Loma mobile metal detector, 415 V, plastic belt, belt width: 300 mm, clearance: 350 mm x 180 mm, total dimensions: 2150 mm x 800 mm x 1100 mm.

Elevating belt, s/s frame, plastic mesh belt with dividers, belt width: 370 mm, divider height: 50 mm, distance between dividers: 250 mm, elevating height: 2000 mm, total dimensions: 3300 mm x 550 mm x 2150 mm.

Transport belt, s/s frame, plastic belt, belt width: 740 mm, total dimensions: 3900 mm x 1010 mm x 1330 mm.

Single batch of plastic film of various types (jumbo/automatic/manual) on pallets.

Single batch of plastic raw materials: -16 big bags "Regenerated" - deposited in Rodengo Saiano (BS) -16 big bag "LDPE" - deposited in Rodengo Saiano (BS) -1 big bag "Elite 5230" - deposited in Chiari (BS) -1 big bag "Braskem R7051" - deposited in Chiari (BS) - Pallets of Master Vario warehouse - Macrolene Pink and Green - deposited in Chiari (BS).

Description: Clamping force: 1,000 kN Screw diameter H: 20 mm Screw diameter V: 18 mm incl. turntable, deposit conveyor, Wittmann handling robot Internal number: A 100/2 2K M2358 SN: 227275 Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 6,700 kg

Description: Internal number: A 100/1 2K M2357 SN: 226901 Clamping force: 1.000 kN Screw diameter H: 20 m  ,Screw diameter V: 15 mm incl. turntable, deposit conveyor, Wittmann handling robot Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 6,700 kg

Description: Clamping force: 1,100 kN screw diameter 35 mm incl. discharge conveyor, Engel ERC 23/2-F handling robot Internal number: E 110/1 M2332 SN: 163486, Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 7,400 kg

Ambaflex de-elevating spiral conveyor, plastic belt, belt width: 300 mm, dimensions: ø 1200 mm x 9100 mm.

5 plastic funnels for moulds, dimensions: (oval) 160 mm x 70 mm, total dimensions: (5x) 300 mm x 230 mm x 80 mm.

5 plastic belts, belt width: (5x) 155 mm.

Plastic crate with various electrical parts, dimensions: 600 mm x 400 mm x 200 mm.

12 Nölle + plastic belts, belt width: (12x) 585 mm, length: (12x) 2860 mm.

Crate with various parts, plastic plate dimensions: 330 mm x 195 mm x 10 mm, total dimensions: 600 mm x 400 mm x 200 mm.

Plastic crate with various parts, dimensions: 600 mm x 400 mm x 200 mm.

4 plastic belts, belt width: (4x) 500 mm.

3 Linde plastic hoses with coupling, box dimensions: 1100 mm x 300 mm x 300 mm.

4 Plastic mesh belts, belt width: (4x) 165 mm, belt length: (4x) 8000 mm.

Plastic crate with telemacanique sensors, model: XUX0ARCTT16, box dimensions: 410 mm x 270 mm x 210 mm.

7 plastic belts, belt width: (7x) 305 mm.

Large amount of plastic belts, belt width: 588 mm / 500 mm / 585 mm / 300 mm /120 mm / 395 mm.

Tray handler, plastic belt, belt width: (1x) 250 mm, (1x) 120 mm, (1x) 105 mm, (5x) 110 mm, total dimensions: 1700 mm x 1100 mm x 2200 mm.

2 transport belts, s/s frame, plastic belt, belt width: 505 mm, total dimensions: 4010 mm x 800 mm x 1820 mm and 4010 mm x 1300 mm x 1200 mm. Incomplete.

Description: Plastic boxes 130 pallets aproximatelly Different brands / sizes & dimensions  , See pictures for more information Approx. Onsite Dimension. (l x w x h): 51,600 x 2,400 x 2,500 mm, weight approx.: 20,000 kg

Plastic band wrapper More then 300 machines new and second hand on our seema .de

Width: 82,6mm plastic 1 pack = 3.048mtr More then 300 machines new and second hand on our seema .de