plastic chiller used for sale

For sale 3 pieces of used BECKER vacuum pumps model VTLF 2.250, they are vane, oil-free, rotary pumps, which affects their durability. The VTLF series are highly durable pumps with low operating and maintenance costs. These pumps feature long life graphite vanes and integrated air filters. Two vacuum pumps from 2018, no.: A3252574, A3252569, are used very little (perfect condition) and the third pump from 2014, no.: 2794370, has had its graphite blades replaced, so its operation does not raise any objections and does not show any vacuum losses. Detailed data in accordance with the photographs of the nameplates.

Automatic machine for the production of bags with the use of a sealing matrix, used by us for the production of ice cube bags. The machine is equipped with a welding and cutting knife, foil feed length adjustment, foil forming device (self-closing pouches), a conveyor belt collecting pouches and a movable table with a pouches counter. The machines have additional equipment in the form of a die for the so-called eurozawieszki and additionally 5 different matrices (with different patterns of bags). The machine is powered by a three-phase voltage of 380V. A pneumatic system is also used for its work. It was produced in 2014, and has not been used since 2020 (beginning of the pandemic).

Plastic round rod, round material, 3 pcs PAGUS 2x PE1000, diameter: Ø 30 mm, length: 1010 mm color: natural 2x PA6G, diameter: Ø 50 mm, length: 980 mm color: blue New ! Dimensions ( Packaging ): 310 x 310 x 250 mm

Key data: 900 kN, 140 g/PS, 35 mm

Year of construction: 2006 Clamping force: 90 tons. Screw diameter: 35 mm Pump hours: 46393 h

Key data: 850 kN, 89 g/PS, 30 mm

Built in 1991 Clamping force: 85 tons. Screw diameter: 30 mm

Key data: 6500 kN, 1650 g/PS, 90 mm

1.0 pcs. Injection molding machine with robot Manufacturer: KRAUSS MAFFEI Type: KM650-2700C2 Year of construction: 2003 Clamping force: 650 tons Tie bar spacing (HxV) 1,000 x 930 mm Screw DN: 90 mm Displacement: 1,813 cm³ Moulded part weight: 1,650 g/hp Control: MC4 Equipment of the machine: - 2 pieces of core pulls movable plate - 2 pieces of core pulls fixed plate -Closing nozzle hydraulic -Robot: Manufacturer WITTMANN, type: W643, year of manufacture: 2003 Travels: Y = 2,400 mm, X = 1,200 mm, Z = 3,000 mm

Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 450/350/H130 mm -Weight: 8.4 kg

Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder -Manufacturer: GPA, plastic socket welding machine type PF063-HA -Voltage: 230V -Power: 800W -Temperature range: up to 260°C -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 440/240/H125 mm -Weight: 8.5kg

Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Georg Fischer GF, socket welding tool set type HE110 -Voltage: 230V -Power: 1400W -Sleeves: Ø 20 - 110 mm, see photos -Dimension box: 460/330/H160 mm -Weight: 12.6 kg

Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Georg Fischer GF, socket welding tool set type MSE 110 E -Voltage: 230V -Power: 1500W -Temperature range: up to 290°C -Sleeves: Ø 16 - 110 mm, see photo -Dimension box: 600/330/H120 mm -Weight: 15.8 kg

20 pieces of plastic windows used, good condition not openable, with frame

Injection moulding machine ENGEL CL 2550/550 Year of production - 2005 Robot name – "ENGEL ERC53/1-F" Clamping force [tons]- 550 Maximum distance between plates [mm]-1650 Min. mould height [mm]-310 Max. mould height [mm]-800 Column spacing (mm) -915x860 Mounting plate size(mm)-1345x1280 Ejector stroke (max) [mm]-250 Screw diameter [mm]-80 Injection weight [g]- 1800 Oil quantity [liter]-1000 Mold Injection Sequence -2 Robot machine ready to work Number of hydraulic cores S/R- 1/1

Arburg 570C 2200-1300 Injection Molding Machine / Hybrid Machine Production year : 2005 Injection system : Screw diameter: 60 mm Injection weight: 558 g Injection pressure: 2000 bar Dosing volume: 664 ccm Locking system : Clamping force: 220 tons Distance between columns: 570x570 mm Size of mounting plates: 795x795 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control system: SELOGICA Additional equipment: Hybrid machine: fast, energy-efficient Euromap 67 Hydraulic core extraction x 2 Injection system - bimetal Machine Main Motor--Inverter Driven Servo Motor--Energy Saving Dimensions: Weight: 9300 kg Length/Width/Height: 6.16x1.91x2.39 m

Battenfeld BA 2000 / 1000 BK injection moulding machine Year: 1997 Driver Version: Unilog 4000 B Technical Details : Clamping Unit: Clamping force: 2000 kN Mold plate size (h x v): 800mm x 800mm Distance between columns (h x v): 560 mm x 560 mm Mould opening stroke: 450mm Mould height min.: 220 mm Maximum mould height: 520 mm Max. daylight: 970 mm Hydraulic ejector - stroke: 160 mm Forward/reverse ejector force: 67 kN Injection Unit Screw diameter : 55 mm Ls/D Ratio: 20 Injection pressure: 1943 bar Injection volume: 522 ccm Injection weight, PS: 595 g Auger speed: 285 1/min Maximum plasticizing rate: 49 g/s Nozzle pressure: 131 kN Electrical & Hydraulic Equipment Nominal pump motor capacity: 30 kW Installed heating capacity: 22.6 kW Tank capacity: 560 ltr. Dimensions & Weight Machine dimensions: 5.65 m x 1.45 m x 2.10 m Total weight of the machine: 9800 kg

Arburg 320 C 500-270 injection moulding machine Year of production: 2007 Control type: Selogica Clamping System: Hydraulic TECHNICAL DATA Closing force: 500 kN Clearance between columns: 320 mm x 320 mm Plate dimensions: 446 mm x 446 mm Mould size: min. 200 mm Maximum opening distance: 350 mm Max distance between plates: 550 mm Screw diameter: 35 mm Injection Volume / Injection Weight: 115 ccm / 105 gram PS Injection pressure: 1470 bar GENERAL DATA Motor: 11KW Heaters: 9.5 kW Dimensions L x W x H: 3.9 m x 1.4 m x 1.9 m Weight: 2400 kg

Clamping unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] min 300 Injection Unit Screw diameter [mm] 50 Injection volume [cm3]: 393 Injection weight [g] 358 Injection pressure [bar] 1892 Dimensions & Weight Net weight with control cabinet [t] 7,8 Dimensions (L x W x H) [m] 5.0 x 1.6 x 2.0

Closure method Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 472 x 472 Clearance between columns (hxv) [mm] 320 x 320 Min./ max. mould height [mm] min 225 Maximum opening width [mm] 575 Injection Unit Screw diameter [mm] 30 Injection volume [cm3] 78 Injection weight [g] 71 Injection pressure [bar] 2210 Electrical-hydraulic equipment Pump motor rated power [kW] 15 Heater power [kW] 8,4 Dimensions & Weight Net weight with control cabinet [t] 2.25 t

Dimensions & Weight Net weight with control cabinet [t] 7.69 Dimensions (LxWxH) [m] 4.48 x 1.5 x 2.2 Clamping unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./ max. mould height [mm] min 300mm Injection Unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878

Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] min 300 Injection Unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 432 Injection pressure [bar] 1564 Dimensions & Weight Net weight with control cabinet [t] 7,8 Dimensions (L x W x H) [m] 5.0 x 1.6 x 2.0

Clamping unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1010 x 1010 Clearance between columns (hxv) [mm] 710 x 710 Min./ max. mould height [mm] 300-710 Maximum opening width [mm] 1380 Injection Unit Screw diameter [mm] 65 Injection volume [cm3] 1078 Injection weight [g] 981 Injection pressure [bar] 1777 Dimensions & Weight Net weight with control cabinet [t] 15.2 Dimensions (L x W x H) [m] 7,60 x 1,80 x 2,40

Clamping unit Clamping force [kN] 4500 Dimensions of mounting plates (hxv) [mm] 1270 x 1200 Clearance between columns (hxv) [mm] 900 x 800 Min./ max. mould height [mm] min 480 Maximum opening width [mm] 1650 Injection Unit Screw diameter [mm] 90 Injection volume [cm3] 1953 Injection weight [g] 1777 Injection pressure [bar] 1742 Electrical-hydraulic equipment Pump motor rated power [kW] 90 Heater power [kW] 59 Dimensions & Weight Net weight with control cabinet [t] 26.3 Dimensions (L x W x H) [m] 7.98 x 2.35 x 2.51m

Clamping unit Clamping force [kN] 2750 Dimensions of mounting plates (hxv) [mm] 1050 x 900 Min./ max. mould height [mm] min 350 Maximum opening width [mm] 1200 Injection Unit Screw diameter [mm] 55 Injection volume [cm3] 556 Injection weight [g] 130 Injection pressure [bar] 1763 Electrical-hydraulic equipment Pump motor rated power [kW] 37 Heater power [kW] 19,8 Dimensions & Weight Net weight with control cabinet [t] 19

Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 670 x 670 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] 225-500 Maximum opening width [mm] 930 Injection Unit Screw diameter [mm] 40 Injection volume [cm3] 251ccm Injection weight [g] 228 Injection pressure [bar] 2100 Electrical-hydraulic equipment Pump motor rated power [kW] 18.5 Power of heaters [kW] 12.1 Dimensions & Weight Net weight with control cabinet [t]: 4.8t Dimensions (LxWxH) [m] 4.9x1.33x2

Clamping unit Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 605 x 605 Clearance between columns (hxv) [mm] 420 x 420 Maximum opening width [mm] 750 Injection Unit Screw diameter [mm] 35 Injection volume [cm3] 144 Injection weight [g] 132 Injection pressure [bar] 1820 Electrical-hydraulic equipment Pump motor rated power [kW] 18.5 Heater power [kW]: 6.5 Dimensions & Weight Net weight with control cabinet [t] 3.18 Dimensions (LxWxH) [m] 4.3 x 1.7x 1.8

Clamping unit Clamping force [kN] 750 Dimensions of mounting plates (hxv) [mm] 590 x 590 Clearance between columns (hxv) [mm] 370 x 370 Min./ max. mould height [mm] 200 Maximum opening width [mm] 730 Injection Unit Screw diameter [mm] 30 Injection volume [cm3] 106 Injection weight [g]: 95 Injection pressure [bar] 2042 Dimensions & Weight Net weight with control cabinet [t] 3 Dimensions (L x W x H) [m] 4.06 x 1.33 x 1.79m

Electric Injection Molding Machine ! Clamping unit Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 720 x 600 Injection Unit Screw diameter [mm] 35 Injection volume [cm3]: 154 Injection weight [g] 140 Injection pressure [bar] 2400 Dimensions & Weight Net weight with control cabinet [t] 5,7 Dimensions (L x W x H) [m] 4.7 x 1.4 x 2.7

Clamping unit Clamping force [kN] 550 Dimensions of mounting plates (hxv) [mm] 530 x 500 Clearance between columns (hxv) [mm] 360 x 355 Min./ max. mould height [mm] min 150 Maximum opening width [mm] 500 Injection Unit Screw diameter [mm] 32 Injection volume [cm3] 75,5 Injection weight [g] 69,54 Injection pressure [bar] 1030 Dimensions & Weight Net weight with control cabinet [t] 2,25 Dimensions (L x W x H) [m] 3.25 x 1.09 x 2.04

Width: 82,6mm plastic 1 pack = 3.048mtr More then 300 machines new and second hand on our seema .de

Plastic band wrapper More then 300 machines new and second hand on our seema .de

27 plastic planks yellow with 2 stainless steel trolleys

approx. 80 plastic pallets 60x40x15 stackable pc 5,00 Euro

WASA underlay boards/plastic boards are offered. Dimensions: 1450x1150x50. 1350 pieces.

Key data: 400 kN, 21 g/PS, 18 mm

Arburg 270 U 400-70 Year of construction: 5/2006 Clamping force: 40 tons. Screw diameter: 18 mm Operating hours: 36000 h additionally 2 Regloplas temperature control units + dryer feeder Fasti

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 2001 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: Thermolift 100-2 - Year of construction: 2001 - Clamping force: 1,000 kN - Screw diameter: 45 mm - Injection pressure: 1,670 Bar - Shot volume: 230 cm³ - Working hours: 58,700

Key data: 500 mm, 25

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 25 mm - Injection pressure: 1,800 Bar - Shot volume: 39 cm³ - Working hours: 52,100

Key data: 500 mm, 30

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-150/60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 30 mm - Injection pressure: 2,200 Bar - Shot volume: 78 cm³ - Working hours: 37,400

Key data: 300 kN, 50 g/PS, 28 mm

Used injection moulding machine Dr. Boy 30 M Procan from ongoing production It can be sold in the condition of functional tested or partially overhauled or refurbished. Parts warranty available. Plasticizing unit 28 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 280 mm (height) x 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH and PIOVAN vacuum cleaner possible for an extra charge incl. installation More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Photos are sample images

Key data: 220 mm, 44 , 28

Used injection moulding machine Dr. Boy 22 M Procan from ongoing production It can be sold in the condition of functional tested or partially overhauled or refurbished. Parts warranty available. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Blow-out device 1-fold Clear width between homens: 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Example photo of identical machine

Key data: 220 mm, 18 , 18

Used, refurbished injection moulding machine Dr. Boy 22 M Procan Parts warranty available. Plasticizing unit 18 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Blow-out device 1-fold Clear width between homens: 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine

Key data: 250 mm, 37 , 24

Used, refurbished injection moulding machine Dr. Boy 25 M Procan Parts warranty available. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 254 mm (width) x 254 mm (height) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine

Key data: 500 mm, 121 , 38

Used injection moulding machine Dr. Boy 50 M Procan from ongoing production Parts warranty available. Plasticizing unit 38 mm thermoplastic open nozzle Water distributor 6-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 335 mm (width) x 305 mm (height) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine Offer subject to change

Key data: 800 mm, 179 , 42

Used injection moulding machine Dr. Boy 50 M Procan from ongoing production Parts warranty available. Plasticizing unit 42 mm thermoplastic open nozzle Water distributor 6-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 410 mm (width) x 358 mm (height) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine Offer subject to change

Key data: 273 mm, 49 , 28

Used injection molding machine Dr. Boy 30 M + Screen controlled machine mipronic + Sold in functional tested or partially overhauled condition. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 255 mm (height) x 255 mm (width) 400V / 50 Hz Operating instructions More Dr. Boy injection molding machines from 220 KN to 80 KN in stock More Dr. Boy Injection Moulding Machine 30 M mipronic (Schleicher Control) in stock Plasticizing cylinder 18 mm, born in 1990 Sample photo Offer subject to change

Plastic pallets SANKO D4-1111-6 1100 x 1100 x 150 mm static: 4000 kg dynamic: 1000 kg tare weight: 10.3 kg used, tested ! Dimensions: 1100 x 1100 x 150 mm Minimum quantity: 5 pieces !

Key data: 1000 kN, 127 g/PS, 35 mm

Regularly maintained machine that is always kept in top condition. The screw rotation is done with an electric servo motor, which is an energy-efficient solution. The rest of the machine is identical to the standard version of the 420 S. The presence of the core puller in this type is extra. Another special feature is that the injection molding unit can be moved from the center. Software and technologies can be read from a CF floppy disk. The display can be done in both Hungarian and German. Manuals can also be in German or Hungarian. Currently, the machine has a 35 auger for technical materials in good condition. A video of the operation of the machine has also been created, which can also be tried out in person at our site. Please see our other ads.

General SKU408U1286 LocationBarneveld MakeScan-Vibro VAV TypeSRS 1250x3200 No.40459 Year of construction2009 Main Features MaterialStainless steel Surface4 m2 Size length3200 mm Sizes width1250 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface4 m² Number of sieve decks:2 Sieve sizes1250x3200 mm With covercheck (3x)1250x600 mm InletDia. 250 mm OutletDia. 250 mm (2x) Drive vibro motor2x Motor2.2 kW, 680Volt (ATEX II2G/D EExe IIT4) (2x) Sieve perforation2x2mm MaterialStainless steel 1.4301 (304) Information Mounted on stainl. st. framecheck Total height2,20 m Weight2000 kg CEcheck Floor space4,20x1,6 m ATEX compatiblecheckPlastic & rubberPlastic & polymersOther feedOther chemicalOrganicsConsumer wasteVibro sievesVAV Scan-VibroIndustries > Recycling > Plastic & rubberIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Other fe ...

The rewinder / perforator is used to rewind the foil from the thimble to the thimble with the control of the foil rewinding length. It also allows you to make perforation at a certain length. Thanks to this machine, it is possible to make very long pieces of foil, used in industry or agriculture. The machine is powered by 380V.

complete plant multi filament polypropylene yarn 2 independent lines compound: 2 extruders diam. 45mm complete with dosamaster 2 ironing groups of 6 godets each 6 COMOLI winders 1 ATLAS COPCO 18+ compressor 1 chiller spare parts various dies for both solid wire and hollow wire hourly production about 50 / kg hh with a title of 1500 den

Calander - calender capacity 1t per hour - extruder capacity 2t per hour - two-stage cascade extruder (upper: planetary extruder; lower: single screw extruder) - three rollers - rollers drive - AC motors powered by inverters. - max width 1400 mm (in a thickness range of 100-500 myx) - max width 1000 mm (in a thickness range of 510-1000 myx) - max temperature 230C - oil / electric shaft heating - 3 winders - expansion shafts 152 and 76 mm - possibility of producing laminates by thermo-lamination

I offer a carding machine along with the weight of the Befama brand after a general overhaul. The machines have been completely renovated, including painting. Equipped with sawing material with a working area of 2000 cm. I also offer a number of other machines for the textile industry - including a complete line for the production of drag.