We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,304 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
CNC firing and drilling system STAKO Novum Year of construction: 2010 Working area: 4,000 mm x 2,000 mm 1x Plasma Power Source with Hypertherm HPR400 1x oxy-fuel torch 1x drilling unit up to 20 mm including tool changer
used
Plasma Cutting Machine MicroStep MG-PrB 6001.20 + S1200 – Retrofit with drilling rig and pipe cutting system Year of construction: 2010 – Retrofit 2021 Working area: 6,000 x 3,200 mm, including 1,200 mm pipe shaft 1x pipe cutting device: 100 – 700 mm 1x Plasma Rotator Plasma Power Source: Hypertherm HPR 260XD 1x fully automatic drilling spindle: up to 30 mm drilling and up to M20 threading (8-fold tool changer) Filter system: Donaldson DFPRO 8
used
Plasma cutting machine MESSER Metalmaster Year of manufacture: 2005/2018(Retrofit) Cutting area: 1,500 x 6,000 mm Plasma Power Source: Hypertherm HPR 130 Accessories: extra slag trays
used
Plasma cutting table 3000 x 1500 mm - Kjellberg Hi Focus 130 Plus Plasma High Definition Kjellberg Hi Focus 130 Plus. MSNC 500 numerical control + Asperwin CAM software. Donaldson 3000 m³ filter unit. Air compressor and dryer. All in very good condition, 1052 hours use. Year of construction 2005. Commissioning 2006. It is possible to inspect the machine in operation.
used
Description: serial number 1703026 nominal mains voltage 3 x 400 V, 50 Hz nominal network power 42 kVA mains fuse 3 x T 63 A maximum current absorption 3 x 71 A idle voltage (DC) 350 V discharge current steps 3 the maximum thickness of the material to be cut (steel) max. 45 mm supply air pressure 0.6 - 0.7 bar required amount of air 230 liters/min thermal insulation class 155 degrees Celsius IP21 protection  , Approx. Onsite Dimension. (l x w x h): 540 x 710 x 710 mm, weight approx.: 230 kg
used
Description: Plasma + oxygas type CNC very little used cutting thickness: plasma- 20mm, Oxy- 100 mm from the side, but without penetrating the board. useful strokes: 2000 x 6000 x 100 mm solid frame made of steel profiles linear guides ISEL Germany drive with pinion-rack system rotary encoder servomotors on all axes General Numerical CNC specialized for plasma cutting hypertherm powermax 105 plasma generator automatic pistol with anti-collision protection automatic THC database with optimal processing parameters CE compliant machine FastCAM professional software – including nesting Hypertherm Powermax 105 source dimensions: exhaustor 700 x 700 x 2500 mm dimensions: plasma 6500 x 3500 x 1900 mm weight: 4000 kg Please take a look at videos of this machine! plate thickness: 20 mm, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 6,500 x 3,500 x 2,500 ...
new
Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-2010-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 800.0 kg - Maximum load: 800.0 kg - Adjustable support legs: 4 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC ...
new
Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-2010-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 800.0 kg - Maximum load: 800.0 kg - Adjustable support legs: 4 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC ...
new
Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-3015-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1100.0 kg - Maximum load: 1800.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems T ...
new
Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-3020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1450.0 kg - Maximum load: 2000.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems T ...
new
Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-4020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 4100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 4650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1850.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 8 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems T ...
new
Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCV-6020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2600.0 kg - Maximum load: 5000.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems ...
new
Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-3015-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1200.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syste ...
new
Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-4020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 4100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 4650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1950.0 kg - Maximum load: 4000.0 kg - Adjustable support legs: 8 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syste ...
new
Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-6020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2700.0 kg - Maximum load: 7000.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syst ...
used
Description: Unused Rated power: 5 5 kVA Rated current: 25 A No-load voltage: 243 V Output voltage: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic duration factor: 40% Efficiency: 70% Insulation rating: F Protection rating: IP21 Arc start: Contact Approx. Onsite Dimension. (l x w x h): 375 x 155 x 300 mm, weight approx.: 7 kg
used
Description: Unused Rated power: 9 2 kVA Rated current: 14 A No-load voltage: 256 V Output current adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic duration factor: 60% Efficiency: 70% Insulation rating: F Protection degree: IP21 Arc start: Contact Approx. Onsite Dimension. (l x w x h): 535 x 210 x 380 mm, weight approx.: 15 kg
used
Description: state: unused and in original packaging maximum cutting thickness: max. cutting thickness 45 mm connection: 380 volt adjustable current: 30-120 amps starting: equipped with 'Pilot Arc' switch-on time: 60% duty cycle (120 A) technology: IGBT technology protection: circuit breaker Additional function: plug for CNC control Including: plasma torch accessories and protective cover. Approx. Onsite Dimension. (l x w x h): 690 x 335 x 575 mm, weight approx.: 38 kg
used
Description: unused in original packaging Approx. Onsite Dimension. (l x w x h): 690 x 335 x 575 mm, weight approx.: 38 kg
used
Description: state: unused and in original packaging maximum cutting thickness: max. cutting thickness 45 mm connection: 380 volt adjustable current: 30-120 amps starting: equipped with 'Pilot Arc' switch-on time: 60% duty cycle (120 A) technology: IGBT technology protection: circuit breaker Additional function: plug for CNC control Including: plasma torch accessories and protective cover. Approx. Onsite Dimension. (l x w x h): 535 x 210 x 380 mm, weight approx.: 15 kg
used
Description: Unused Rated power: 9 2 kVA Rated current: 14 A No-load voltage: 256 V Output current adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic duration factor: 60% Efficiency: 70% Insulation rating: F Protection rating: IP21 Arc start: Contact Approx. Onsite Dimension. (l x w x h): 375 x 155 x 300 mm, weight approx.: 7 kg
used
Description: SPECIFICATIONS Character: HPM Type: Steelmax Year built: 2008 Plasma cutting machine: Yes Capacity: 2,100 x 4,250 mm Table length: 2,100 mm Panel width: 4,250 mm including drill and tap unit weight approx.: 12,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 6,600 x 2,300 mm
used
Description: NERTAJET HP300 / CPM400 / THDI160 HPC DIGITAL PROCESS D610 HPI control director ATLAS COPCO GA5FF COMPRESSOR FRIOJET 300 cooler COMPACT ICP 8 cleaning filter weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 20,000 x 2,400 x 2,240 mm
used
Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Maximum cutting thickness: max. cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with " Pilot Arc " duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug Condition: unused and in the original packaging
used
Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-40 Maximum cutting thickness: Max. cutting thickness 20 mm Connection: 230 volts Adjustable current: 20-40 amps Start: "scratch-start" Duty cycle: 40% duty cycle (40A) Technology: IGBT Technology Protection: circuit breaker Includes: plasma torch, accessories and protective cover Condition: unused and in the original packaging
used
Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Maximum cutting thickness: max. cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with " Pilot Arc " duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug Condition: unused and in the original packaging
used
Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Maximum cutting thickness: max. cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with " Pilot Arc " duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug Condition: unused and in the original packaging
used
Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-60 Maximum cutting thickness: Max. cutting thickness 20 mm Connection: 380 volts Adjustable current: 20-60 amps Start: "scratch-start" duty cycle: 60% duty cycle (60A) Technology: IGBT Technology Protection: circuit breaker Includes: plasma torch, accessories and protective cover Not included: 380 volt plug Condition: unused and in the original packaging
used
The machine is in good technical condition, can be tested under current. Control Automation with control system BURNY 10 LCD Cutting unit HiFocus 130 + FlowControl KJELLBERG Finsterwalde the FineFocus power unit HiFocus 130 so for the Pierce table itself. + technical and electrical documentation. The working area of the table is 1600 x 6000. It is used for - the first half is working (currently firing) the second half is (preparation of material -table sheet metal) here after the firing in the first part and the head over the second half of the table starts firing. Both gas or plasma cutting heads can be used. The machine also includes a LeibInger JET 2 SE marking unit (fast drying ink) The machine is powered by 230V 50Hz, 20A C / The unit is powered by 3x400V , 50Hz 50A slow fuse. Compressed air for both machine and plasma is 6 bar/ 8,3 bar. Otherwise see technical data sheet
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig
used
E-welder ESAB type LTG 250 Rod electrode welder Masch. No. 736-820-387 Year of construction 1997 Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % ED Power adjustment: infinitely variable - electrode holder with 6 meters connection cable - DC fan - air cooling - possibly also TIG welding possible, without hose package Mains connection 380 Volt, 50 Hz, 32 Amp. Plug Space requirement L x W x H 1200 x 750 x 1050 mm Weight 180 kg good condition Device was originally also designed for TIG welding. The hose package for TIG welding is not available and the function has not been tested. The water cooling was for the hose package for TIG welding. The device is therefore sold only as an electrode welding machine.; used
used
Welding turntable - welding turning device with housing Load capacity approx. 50 kg Lathe chuck diameter 300 mm Chuck speed 1.0-15 rpm. Mains connection 230 Volt, 50 Hz - Flat spiral lathe chuck with inwardly stepped chuck jaws - Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left - Start via electric switch - Welding current transmission with sliding contact - Suction connection 160 mm- Interior lighting door opening W x H 715 x 1060 mm Interior dimensions W x D x H 780 x 780 x 1100 mm Space requirements W x D x H 900 x 900 x 2300 mm weight 190 kg; used
used
used
used
used
Spot hump welding machine NIMAK type PMP 5 / 35 spot welding machine, projection welding machine Fabr. No. 88100 Year of construction approx. 1988 Power at 50% ED 35 kVA Radius 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm 60 mm Electrode holder 30 mm Insert electrodes Cone MK 2 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connection load 83 KVA Mains connection 380 volts, 50 Hz - 4-times control - stepless power adjustment - single points and series points - bulging electrode guide - water-cooled (without cooling unit) - electric foot switch Space requirement L x W x H 1200 x 650 x 1500 mm Weight 300 kg good condition; used
used
New ESAB Miggiytrac 1001 electr. Welding chassis Speed: 0.5 - 1.2m/min as new/unused (may show signs of storage) in OVP These are unused goods in their original packaging, which can only show signs of storage. This and further details can be found in the photos. Price excl. VAT (#7717).
used
Inverter welding machine for MMA welding TECHNOLIT type PROFImat 170 Plus MMA welding machine, inverter welding machine, electric manual welding inverter Serial no.: TB1703500316 Item no.: 440030 Year of construction 2022 Power TIG (DC) 170 Amp. 45% ED 150 Amp. 60% ED 135 Amp. 100% ED Power MMA 170 Amp. 35% ED 145 Amp. 60% ED 125 Amp. 100% ED Adjustment range 5-170 Amp. infinitely variable Mains connection 230 Volt, 50 Hz hot-start function (optimises ignition behaviour, simplifies welding start of electrodes that are difficult to ignite)- Anti-stick function (optimises electrode guidance and prevents electrode from sticking)- Arc force function (optimises arc stability and improves penetration) - Lift-Arc ignition - Rod electrode welding, can be used for all electrode types up to 4 mm- Ground cable with plug connection - Electrode rod with 3 meter cable and plug connection - equippe ...
used
used
Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 450/350/H130 mm -Weight: 8.4 kg
used
Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder -Manufacturer: GPA, plastic socket welding machine type PF063-HA -Voltage: 230V -Power: 800W -Temperature range: up to 260°C -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 440/240/H125 mm -Weight: 8.5kg
used
Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Georg Fischer GF, socket welding tool set type MSE 110 E -Voltage: 230V -Power: 1500W -Temperature range: up to 290°C -Sleeves: Ø 16 - 110 mm, see photo -Dimension box: 600/330/H120 mm -Weight: 15.8 kg
used
We sell 4 pieces of used welding units, welding rectifiers, brand Lincoln DC400, year: 1993, functional, in need of easy repair, only for export For purchase of 4 pieces Price per piece 500,00 E net Single price 600,00 E net
used
TIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) TIG Welding Machine Fabr. No. 0507214 Year of construction 2007 Power TIG 225 Amp. = 40% ED 180 Amp. = 60% ED 140 Amp. = 100% ED Power Electrode 180 Amp. = 50% ED Mains connection 400 Volt, 50 Hz. 16 Amp. Plug- DC welding machine - infinitely variable power adjustment - 2 stroke and 4 stroke operation - HF ignition - pulse welding mode- rod electrode operating mode- water-cooled - 8 meter TIG hose package with hand torch - inert gas pressure reducer - operating instructions space requirements L x W x H 1000 x 450 x 710 mm Weight 90 kg very good condition; used
used
TIG and Electric Inverter Welding Machine ESS Type 170 ATG (AC-DC) TIG Welding Machine Fabr. No. 0907036 Year of manufacture 2007 Power TIG 170 Amp. = 35% ED 130 Amp. = 60% ED 110 Amp. = 100% ED Power Electrode 140 Amp. = 35%ED Mains connection 230 Volt, 50 Hz. • DC and AC welding • HF ignition • Infinitely variable power adjustment • 2-stroke and 4-stroke welding operation • Pulse welding mode• Rod electrode operating mode• 8 meter hose package with TIG burner• Inert gas pressure reducer • Fan cooling • Portable Space requirement Welding machine L x W x H 400 x 270 x 500 mm Weight 26 kg very good condition; used
used
--- Young Used TIG and MIG-MAG systems (demonstration systems, etc.) with only a few welding hours in very good condition. To be delivered directly from the manufacturer at attractive conditions --- LORCH COBOT WELDING PACKAGE: Cobot UR 10 + V 30 AC-DC - Collaborative TIG welding - Welding machine: V30 AC-DC Cobot - Optional: digitally fully integrated cold wire feed EASY PROGRAMMING With the free-drive function, welders show the cobot where it should weld by hand – including intermediate waypoints and sections. Operators can then perform the tasks precisely with the help of the robot. The optional multifunction flange also allows programming directly on the 6th robot joint to avoid unnecessary walking distances. SECURE AND FLEXIBLE The safety concept consisting of laser and function probe ensures that the operator is not within the radius of movement of the robot arm ...