pierret used for sale

Wickman 5/8 + Barloader Pietro Cucchi PB20 The machine is located in Spain.

OEM Pielstick PC 2-2 / PC 2.2 / PC2.2 / PC2-2 Connecting rod bearing (lower and upper part) 02.403.0001.00 New and unused (Condition - See photos, unused, from a canceled order, stored since 2013). I have 5 sets in stock.

OEM Pielstick PC 2-2 / PC 2.2 / PC2.2 / PC2-2 Main bearing (lower and upper part) 02.401.0001.00 New and unused (Condition - See photos, unused, from a canceled order, stored since 2013). I have 4 sets in stock.

OEM Pielstick PC 2-2 / PC 2.2 / PC2.2 / PC2-2 Piston ring (Compression ring 1st groove, std. 9.00 mm) - part number 02.005.0315.03 New and unused (Condition - See photos, unused, from a canceled order, stored since 2013). I have 16 pcs in stock.

OEM Pielstick PC 2-2 / PC 2.2 / PC2.2 / PC2-2 Piston ring (Copper plated compression ring, 9.00 mm) - part number 02.005.0027.02 New and unused (Condition - See photos, unused, from a canceled order, stored since 2013). I have 48 pcs in stock.

I offer hydraulic shears not sheet metal marked NTA 3150/10A manufacturer Strojáreň Piesok. The maximum cutting length is therefore 3150 mm and the strength of the structural steel sheet is 10 mm. Plugged in, fully functional, but so rarely used that its not worth my while to keep them. (they do not fit into our primary production segment) Price negotiable, buyer arranges transport, total weight 14,000 kg Possibility of viewing, testing - at the Chrudim facility

Pieralisi Used Complete Line Jumbo 4 2006 4 ton per hour We have a Pieralisi used complete line available from 2006 This line includes a belt complete with a defoliator a Pieralisi jumbo washing machine made of stainless steel a 55 kW Pieralisi crusher and a modular kneader group with 3 tanks as well as a double kneader with an 80 pasta pump The line also includes a Pieralisi Jumbo 4 decanter with an integral system that works in 2 3 phases complete with a vibrating screen and hjdra pump A Pieralisi automatic separator 1500 2000 is also included along with a separation group a water heater and a general electrical panel group This Pieralisi used complete line from 2006 has a working power of 4 tons per hour If you are interested in purchasing this equipment please contact us for more information [...for more information send your inquiry to the seller.] refno: LC375

Pieralisi Used Complete Equipment for Oil Production SC 600 1997 1 ton per hour Pieralisi is a well known Italian company that specializes in the design and manufacture of machinery for the extraction and processing of olive oil as well as equipment for other industries such as wine beer and dairy The Pieralisi SC 600 is a complete equipment used for olive oil production 1 ton per hour The SC 600 is a complete production line that includes all the necessary machines for the processing of olives into oil This includes a washing machine a leaf remover a crusher a malaxer a centrifuge and a decanter The machine is designed to process up to 600 kilograms of olives per hour making it ideal for small to medium sized olive farms The washing machine is used to remove any dirt or debris from the olives while the leaf remover removes any leaves or stems that may be attached to the fruit The crushe ...

Pieralisi automatic olive oil processing plant 1 ton h Components and Material of the Pieralisi Olive Oil Plant The Pieralisi automatic olive oil processing plant 1 ton h is mainly built in stainless steel a material chosen for its resistance to corrosion and ease of cleaning The system includes key components such as the olive elevator hammer crusher and double bowl mixer all designed to operate at 380 volts Maintenance and Reliability Maintenance of the machinery is a priority motors and bearings are regularly checked and replaced when necessary to ensure optimal operation Attention to maintenance prevents malfunctions and prolongs the useful life of the machinery Working process The process begins with the phase of defoliation washing and transport of the olives followed by pressing The LAVOLEA 90 INOX 2006 model is used for defoliation and washing while the olives are transported via ...

Used Complete Line for Oil Pieralisi Maior 2 2000 2 ton per hour The Pieralisi Maior 2 2000 is a state of the art machine that is designed for high speed oil production This machine is widely used in the oil industry due to its reliability and efficiency The complete line for oil production includes several components all of which are Pieralisi Maior 2 2000 machines These machines are designed to work together to produce high quality oil quickly and efficiently The components of the complete line include a decanter separator heater conveyor defoliator washer auger and Grams Group The decanter is used to separate the oil from the solids while the separator is used to remove any remaining impurities The heater is used to heat the oil to a specific temperature and the conveyor is used to transport the oil from one machine to another The defoliator is used to remove any remaining leaves or s ...

The Strojane Piesok LODD 200 press brake was produced in 1982 by the Czechoslovak company Strojarne Piesok. The machine works with a force of 200 tons of pressure and allows bending sheet metal with a length of 4000 mm. The press is equipped with a table (L x W) 4000 x 200 mm, and its power is 22 kW. The total weight of the machine is 22,660 kg. Specifications of Strojane Piesok LODD 200 press - press force: 200 t - maximum bending length: 4000 mm - table dimensions (L x W): 4000 x 200 mm - upper tool maximum stroke: 100 mm - distance between table and slider: 200 mm - distance between body walls: 3300 mm - maximum number of clutch engagements: 14/min - main motor power: 22 kW - main motor speed: 1460 rpm - air pressure: 0,4-0,6 MPa - maximum air requirement: 25 m3/h - power supply: 380 V; 50 Hz - dimensions (L x W x H): 4420 x 2060 x 3800 mm - weight of the LODD 200 pre ...

STROJARNE PIESOK XZMP 3150/6.3C 3-roll plate rolling machine built in Czechoslovakia in 1983 is designed for pre-bending and rolling sheet metal into cylindrical or conical covers and segments. The machine is distinguished by a fully welded structure with increased rigidity and three high-quality 300 mm diameter rollers with longitudinal grooves for easy alignment of the sheet. The bottom rollers, driven by a high-performance motor with two stages of rotation, allow for vertical repositioning during pre-bending and coiling, and also allow for an offset to an inclined position when the claw couplings are opened. As a result, each of the four lower roll bearings can be freely adjusted in the pitch range. The XZMP plate rolling machine has a control panel with a function to monitor the position of the lower rollers directly on the numerical indicators. The total weight of the STROJARNE  ...

FOR SALE S.E.M.T. PIELSTICK PC3. 0 NEW ORIGINAL SPARE PARTS HAVE A GDY SIR WE VE BELOW LISTED NEW ORIGINAL SPARE PARTS OF S.E.M.T PIELSTICK PC3 AT OUR STOCK IN TURKEY. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. MAIN BEARING SHELLS STD 2 PAIRS THRUST BEARINGS 1 PAIRS LINER ORING 50PCS CON ROD BOLT 3 PC CON ROD BUSH 3 PCS BARREL PLUNGER 4 PCS PISTON RING KIT H 12 SET VARIOUS PISTON RING 93PCS PCS PISTON PIN RING 20 PCS GASKET OF CYLINDER HEAD KIT 3 PCS EXHAUST VALVE 5 PCS ENJEKTOR LONG SPRING 15 PCS ENJECKTOR SHORT SPRING 12 PCS ENJECTOR NUT 4 PCS ENJECTOR NOZZEL 15 PCS ENJECTOR DELIVERY VALVE 25 PCS LOCATING PIN 16 PCS . Capt. Ayhan Ugurlubay Best of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HPR260XD plasma system is suitable for use in sheet thicknesses up to 64 mm. The system delivers a high-quality cutting quality, high productivity and reliance with low operating costs. Equipment: ? CNC control system Pierce-19 with 19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HPR260XD for cutting structural steel up to a material thickness of 64 mm, hole piercing up to 38 mm, beard-free cut up to 32 mm, manual gas console ? Two three-burner autogenschraegschneidkoepfe with electrical finishing and burner attachment control for  ...

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction sizing without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft switch inverter, HiFocus 280i offers a fully electronic power source for the power range up to 280 A. The system provides the best cutting results in the field of laser-like cuts and offers a higher service life of the wear parts. Equipment: ? CNC control system Pierce-19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HiFocus 280i for cutting structural steel with recommended material thickness of 0.5 - 50 mm, punching up  ...

USED STAINLESS STEEL 10.000 LITRES TANK REF.: C4531 Vertical tank manufactured by PIERRE GUERIN in stainless steel with a capacity of 10,000 liters. Flat bottoms, with security camera and electrical resistors. General characteristics: Manufactured by PIERRE GUERIN Material Stainless steel Year built 2005 Technical characteristics: Capacity 10.000 L Bottom type Flat

Semt Pielstick Marine Diesel PA4-185 GANZ-MAVAG-SEMT PIELSTICK Possibly sold in parts !

OEM Pielstick PC 2-2 / PC 2.2 / PC2.2 / PC2-2 Exhaust Valve Seat 943 124 015 Valve seats are new and unused (Condition - See photos, unused, from a canceled order, stored since 2013). Please kindly note that we also have another Pielstick spare parts on stock. If you are interested we would be pleased to provide you with our stock list.

Description: The three squeezing machines have an extraction capacity of 400 kg/hr (for sunflower oil) and are composed of 4 worm screw extruders with an external case made of interchangeable modules in hardened steel. Each individual extruder is completely modular and allows for the identification of a single component that may be damaged in order to replace it easily and economically. These three machines require half a day per week for cleaning and inspection of consumable parts, which are located at the front, where the pelletized product comes out, and in the thrust bearings. The machine has been perfected over time to achieve maximum extraction potential (as far as sunflower seeds are concerned) and to minimize wear on the various parts. It is possible to change the order and composition of the individual rings that make up the case for the processing of other oilseeds (in this c ...

Pierce Control Automation RUR 2500 P working range: 2.1 m x 6.1 m control: Burny 10 LCD Completely welded portal construction without screwed connections o linear guide in the transverse axis o AC servomotors (12 000 mm/min.) o Digital synchronization on the laeng axis o CNC control system BURNY 10 LCD Plus with touch screen o membrane keyboard o flyingmounted cutting buttons o Automatic initial adjustment of the plasma torch o voltage monitoring of the plasma torch height o 1 torch parking lot outside the cutting area o circuit breaker at the end of all axes 1 x Plasma Kjellberg 160i with manual gas console cutting up to 25mm qualifying cut Optional autogencan Completely factory-assembled machine assembly and commissioning ready for use

The CNC-controlled plasma cutting machine RUR 2500P is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 161 i plasma system from Kjellberg with Contour Cut is suitable for use in the sheet thickness range of 0.5 - 40 (50) mm. As a soft switch inverter, HiFocus 161 i offers a fully electronic power source for the power range up to 160 A. The system is the multi-talent of plasma cutting technology for marking and cutting construction blades, alloyed steels, aluminium and all electrically conductive materials. (see Pdf ) Equipment: ? CNC control system Pierce 19 with touchscreen ? A motorized torch with automatic initial setting and burner ? Plasma cutting unit HiFocus 161 i for cutting structural steel with recommended material thickness of 0.5 - 38 mm, hole bars up  ...

Pierce control automation RUR 2500 P Work area: 2.1 m x 6.1 m Control: Burny 10 LCD Fully welded Portal construction without bolted connections o LM Guide in the transverse axis o AC servo-motors (12 000 mm / min.) o Digital synchronization on the longitudinal axis o CNC control system BURNY 10 LCD Plus with touch screen o Membrane keyboard o 'Flying' bearing inserts o Automatic initial setting of the plasma torch o Voltage monitoring of plasma torch height o 1 burner parking outside the cutting area o Circuit breaker at the end of all axes 1 x plasma Kjellberg 160i with manual gas console Cut quality cutting up to 25 mm Optional autogen retrofittable Completely Factory reconditioned machine Installation and commissioning on request

Pallet stretch-wrapper PIERI Speed 100 pallets/h Control SIEMENS S 7

Used Spiralkneter PIETRO BERTO, type: easy120 - for 120kg of dough - 2 speeds - 1 boiler speed -Schüsselvolumen-203 litres -Bowl diameter: 800 mm -Course mixing arm: 101 / 202 RPM. -Boiler speed: 11 RPM. -El. Connection: 3 x 400 V, 50 Hz, 6.8 kW, 16A -Weight: 568 kg The dough tool is located in a very good condition of the bakery. Inspection and test run are possible by arrangement like. Last machine in stock!

3 pieces used heavy placement arms for table scissors, etc. Length 490 mm Width 98 mm Weight / piece 16 kg

Spreading attachment PIETSCH STA 1.7 MW series 2000, capacity 1.7 m3, conveyor belt, tarpaulin folding roof, spreader rubber, drive via vehicle hydraulics, with remote control and support supports. Sale as is or in parts possible.

Automatic powder dispersing system in EEx protection Make: Pierre Guerin Type: Blending System SM 20 Y.O.M.: 1994 Power: 2.5 kW Plant number: 4461 - 4450 Pump supply and output electro-pneumatic valves as good as new on mobile tub bowl Dimensions LWH: 1500 x 1100 x 1150 mm Weight: approx. 700 kg

Used Stikken ovens PIETRO BERTO, Type: PBR H5/E-18 -In bakery condition - with gas burner - 3 ovens available - Sheets for baguette and 3-edge perforated sheets also available Visit and test run on request.

We sell a pietroberto fork kneader. The machine is ideal for flatbread doughs. Used and overhauled / Warranty

Qty. 1 Second-hand billet homogenising furnace – still on foundation Mfc.: Pieco Servis Sp.zo.o. Built: 2004 Billet sizes: 7” & 8” x 7000 mm Material: Al alloys series 6060, 6063, 6061 Type of furnace: continuous furnace with a mechanical hearth Ingot size: Aluminum billets Ø 203 and 178; ingot length L = 7000 mm Type of heat treatment: Homegenising process Installed power: Heating: 955 kW Electrial: 50 kW Type of built-in burners: ThermJet Supply voltage: 400 V, 50 Hz Type of heating gas: GZ50 Gas pressure: 150 mbar Furnace performance: 1700 kg/hour 1000 Mg / 25 days (three-shift operation) Unit gas consumption: 27 m³/ Mg Furnace operating temp.: up to 600 °C

faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1400 mm control: SIEMENS 850M total power requirement: 125 kW weight of the machine ca.: 38 t dimensions of the machine ca.: m Stocknumber 1020042 Type of machine CNC VTL Make PIETRO CARNAGHI Type AC 10 CNC Build in 1987 Type of control Siemens 850 M/E Faceplate diameter 1000 mm Max. Swing diameter 1400 mm Turning height max. 1400 mm Total Power (KW) totaal 125 Lenght (mm) 11000 Width (mm) 8000 Height (mm) 6000 Weight 38000 kg Additional information with driven tools with pallet changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic Bending Machine Fabr. STROJARNE - PIESOK Type XONM 2000 / 2A - 2Machine -No: 237-516-1978, built in 1978Working length: 2050 mmMax. Sheet thickness: 2.0 mmbend to: 135 °Bending time: 3.5 sec.Stroke of the upper beam: 250 mmStroke of the lower cheek: 100 mmStroke of bending beam: 100 mmDrive power: 2.2 kWWeight approx: 2800 kgExternal dimensions approx: 3000 x 800 x 1600 mmWith- Separate hydraulic system- adjustable bending angleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic folding machine make STROJARNE - PIESOK type XONM 2000/2Technical specifications:Working length: 2050mmMax. sheet thickness: 2.0 mmbend up to:135°Bending time: 3.5 sec.Stroke of the upper beam: 250 mmStroke of the lower beam: 100 mmStroke of the bending beam: 100 mmDrive power: 2.2 kWWeight approx.: 2800 kgExternal dimensions approx.: 3000 x 800 x 1600 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CTO 400 Piesok press brake from 1981 for sale. (pressure 400t) The piston rod is damaged and has a micro-crack. We have dies and punches in various sizes for it - prices to be agreed. The total weight of the press is approximately 39t.

WE OFFER AN WERY NICE CONDITION VARTICAL LATHE CNC Vertical Lathe (VTL) with C-Axis and Milling spindle & Pallet changer Pietro Carnaghi - ATF 8 TM Year 1995 NUM 1060 II CNC Control Pallet changer with 2 pallets Pallet diameter 800 mm Max. workpiece weight 1500 mm Swing diameter 1100 mm Turning diameter max. 1000 mm Turning height max. 750 mm Table drive motor 60 KW Table speeds 1.5 ~ 1000 rpm C-Axis 0.001° Milling spindle drive 23.5 KW Milling spindle speeds 12 ~ 3000 rpm Tool taper BT 50 Automatic tool changer for 80 tools Full work area guarding Chip conveyor Coolant through the spindle Paper band filtration unit Good condition High accuracies Under power for inspection Available immediately WE CAN ORGANIZE FOR CLIENTS AS WELL TRANSPORT OF MACHINE TO THEIR LO ...

Type: CTO 80/2500 Parameters: 80 t, 2500 mm Manufacturer: Strojárně Piesok Year of production / SO / GO: - / - / - Description: The machine is in good technical condition. Nominal forming force: 80t Working table length: 2500mm Maximum stroke: 150mm Maximum distance of the table from the ram: 360mm Working height: 800mm Dimensions LxWxH: 3700 x 1250 x 2385mm Machine weight: 6550kg Upon agreement, the possibility of a tour in progress.

Inv. Num. : 6623 Type: RUR Control Automati Producer: Pierce Created: 2006 Parameters: Control system: BURNY 10 LCD Working table length: 6000 mm Working table width: 1600 mm Plasma source: KJELLBERG HiFocus 130 Equipment: Flow Control Fine Focus Labeling device LeibInger JET 2 SE

Inv. Num. : 6768 Type: CTO 80 Producer: PIESOK Created: 1990 Parameters: Compressive force: 80 t Machine weight: 6100 kg

Used spiral mixer PIETRO BERTO, type: easy 120 E -in bakery condition- - with extendable boilers - for 120kg dough - 2 speeds - 1 boiler speed - Incl. 3 tank wagons - Bowl volume: 203 litres - Bowl diameter: 800 mm - Gears kneading arm: 101 / 202 rpm. - Boiler speed: 11 rpm.

Very powerful CNC plasma cutting machine Pierce a.s., Czech Republic Manufacturer: Pierce Control Automation a.s. Model: RUM 3000P HD Year of construction: 2014 Condition of the machine: very good Technical Specifications Work table length: 12,000 mm (can be shortened if required) Work table width: 2,500 mm Total cutting capacity: 200 kW Portal width: 3,000 mm Table size: 2000 x 2500 x 630 mm (6 pieces) Max. cutting range: Burrless: 0–32 mm Production die-cutter: 38 mm Maximum cutting capacity: 64 mm Accessories: Documentation Lantek Programming Software Plasma Source: Hypertherm HPR 260HD Internal suction filtration 5500m2/h - NEW unused The machine has undergone a full inspection and maintenance, including testing, by the manufacturer Pierce. We have logs available! Service and spare parts are hassle-free, Czech manufacturer! The machine is no ...

Extraction system mobile With floor nozzle Make Pieper Type KP 140 Machine No. 79273 Mobile extraction system including floor nozzle Chip bag diameter 600 mm Suction connection diameter 140 mm Motor power 1.1 kW Plastic impeller Wheeled on wheels Operating height 2500 mm Transport Dimensions 1300 mm x 800 mm H 1600 mm Weight 79 kg plus pallet

CNC Vertical Lathe PIETRO CARNAGHI Model AP 140 TMY Year: 2013 Never used Table Diameter: 10000mm Max. swing: 14000mm Max. loading on table: 500t Max RPM: 0.2-35 Turning height: up to 8900mm CNC Siemens 840D Ram size: 600x600mm Ram stroke: 4000mm Milling head power: 100kW Machine is packed in containers and ready for shipment. The machine was assembled by manufacturer, tested, disassembled and shipped to the buyer. And was never installed after that.

CNC Vertical Lathe PIETRO CARNAGHI Model AP 140 TMY Year: 2013 Never used Table Diameter: 10000mm Max. swing: 14000mm Max. loading on table: 500t Max RPM: 0.2-35 Turning height: up to 8900mm CNC Siemens 840D Ram size: 600x600mm Ram stroke: 4000mm Milling head power: 100kW Machine is packed in containers and ready for shipment. The machine was assembled by manufacturer, tested, disassembled and shipped to the buyer. And was never installed after that.

General SKU360U948 LocationBarneveld MakePierre Guerin Technologies TypeBioreactor 750L No.H1M8051210 Year of construction2009 Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume750 Ltr. Motor0.25 KW Specified Features - Stainless Steel Reactor ReactorBioreactor Capacity750 Ltr. (max. 1105 Ltr.) Dished bottomcheck Dished top sidecheck Manholecheck With jacketcheck(19 Ltr.) Max. temperature150 °C With paddle stirrercheck Motor0,25 kW 220-240/380-415 Volt Speed mixing shaft89 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information With switchgearcheck(as is) Weight950 kg CEcheck Mounted on legscheckMinerals & inorganicAPIPlastic & polymersBiopharmaceuticalDyes & pigmentsAgrochemicalsSolid pharmaceuticsBiotechnologyRubberLubricants & ...

General SKU360U947 LocationBarneveld MakePierre Guerin No.H1M8051220 Year of construction08/2009 Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume750 Ltr. Motor0.25 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity750Ltr. (bruto 1105Ltr) Dished bottomcheck Dished top sidecheck Manholecheck Top connectionscheck Outletcheck With jacketcheck With propellor stirrercheck Motor0,25kW, 220-240/380-415Volt, 1300/94rpm Speed mixing shaft94rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information Mounted on legscheck With switchcheck CEcheck With switchgearcheck(as is) Weight1000 kgMinerals & inorganicAPIPlastic & polymersBiopharmaceuticalDyes & pigmentsAgrochemicalsSolid pharmaceuticsBiotechnologyRubberLubricants & oleo ...

General SKU232M160 LocationBarneveld MakePierre Guerrin Technologies TypeTSI-3 No.S8240200 Year of construction1999 Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket2 Bar Main Features MaterialStainless steel Volume3 Ltr. Specified Features - Paddle dryer Paddle dryerTurbo-Sphere dryer (1x) Capacity3,0 Ltr (tot 4,48 Ltr) Trough sizesdia. 200mm Outletdia. 35mm With jacketCover can be heated (microwave) Max. temperature130 Degr C MotorDC motor (104 Volt) With variable speed drivecheck With lump breakercheck With vacuum pumpMake. Vacuubrand RE 5 capacity 5,6 m3/h MaterialStainless steel 2.4602 (Hastelloy C-22) Information With switchcheck Floorspace1,0x0,9 M Total height1,5 MMinerals & inorganicAPIBiopharmaceuticalDyes & pigmentsAgrochemicalsSolid pharmaceuticsConfectioneryBiotechnologyOther feedAnimal feedOther chemicalStarchFine chem ...

Type: XZMP 3150/16 Parameters: 3150 mm, 16 mm Manufacturer: Strojárne Piesok Year of production: 1984 Location: Czech Republic Description: Max. bending length 3150 mm Max. plate thickness 16 mm Min. inner diameter of rounded tube 550 mm Rolling speed 7 mm / min Roller adjustment speed 2x22 mm / min Machine dimensions LxWxH 7900x1930x2500 mm Machine weight 46800 kg

Inv. Num. : 6144 Type: Scorpion 2000 Producer: Pierce Created: 2004 Parameters: Work table length: 3000 mm Work table width: 1500 mm Minimum sheet thickness: 2 mm Maximum sheet thickness when cutting: 15 mm Equipment: Source: Hypertherm 1650 Vacuum New Burner PC board replacement. According to GO.

Key data: 80 mm

Inv. Num. : 6470 Type: CTO 80 Producer: PIESOK Created: 1990 Parameters: Compressive force: 80 t Machine weight: 6100 kg

Inv. Num. : 6144 Type: Scorpion 2000 Producer: Pierce Created: 2004 Parameters: Work table length: 3000 mm Work table width: 1500 mm Minimum sheet thickness: 2 mm Maximum sheet thickness when cutting: 15 mm Equipment: Source: Hypertherm 1650 Vacuum New Burner PC board replacement. According to GO.