We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,826 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Cross table Execution: Horizontal Clamping surface: Length: 270 mm Width: 175 mm Travels: longitudinal: 200 mm Crosswise: 150 mm Table height: 160 mm Number of T-channels: 4 T-channel width: 10H7 mm Dimensions: Length: 350 mm Width: 250 mm Height: 200 mm
used
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Resolution: 0.001 ° Centre height: 100 mm Weight: 32 kg Overall dimensions machine: Dimensions: Length: 380 mm Width: 160 mm Height: 300 mm
used
Technical data Voltage 50 Hz 3x: 380 Volt Heating: 300°
used
Technical data Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 0.5 kW Machine´s weight about: 140 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 500 mm
used
Technical data Voltage 50 Hz 3x: 220/380 Volt Machine´s weight about: 60 kg Overall dimensions machine: Length: 800 mm Width: 600 mm Height: 800 mm
used
Jusan shear for cutting uncoiled wood. Includes drive belt for the sheet and two 80% blades. It works perfectly and can be viewed at any time.
used
Technical data Voltage 50 Hz 3x: 380 Volt Total installed power: 2.5 kW Overall dimensions machine: Length: 1000 mm Width: 800 mm Height: 1700 mm
used
Wemhöner Wood Press Size : 250 cm x 120 cm Double table Machine is in a good working condition
used
This Busellato Jet Optima T5 Wood working machine was manufactured in the year 2018. It is equipped with a TPA control unit and has 5 axis.
used
This HOMAG BAZ20/50/16/K Wood working machine was manufactured in the year 1998. It is equipped with a PC 85 mit SPS control unit. The machine has a spindle speed of 17500 rpm.
used
Technical data Dimension of the workpice: Width: 300 mm Height: 8 - 100 mm Execution for: deburing Dim. de la bande transport: Length: 2400 mm Width: 300 mm Vitesse de la bande de transport: 2 - 12 m/min Voltage 50 Hz 3x: 400 Volt Total power required: 7 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 2300 mm Width: 2200 mm Height: 2250 mm Various accessories: Dust extraction: Sideros Eco 2
used
This Biesse Rover 321R Machining Wood Working machine was manufactured in the year 1995 in Italy. It is equipped with a CNI NC 481 control unit. The machine has a spindle speed of 15000 rpm.
used
This BIESSE Rover 321 R Wood machine was manufactured in the year 1998 in Italy.
used
This HOLZHER PRO MASTER 7018 Wood Working was manufactured in the year 2020 in Austria. Has never been used.
used
Technical data Spindle speeds: 1800 rpm Aspirated air: 20 m3/min Voltage 50 Hz 3x: 400 Volt Driving motor (motor power): 1.1 kW Power: 2.7 A Weight: 100 kg Dimensions: Length: 800 mm Width: 550 mm Height: 1100 mm
used
Technical data Quantity delivered: 60 l/min Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 90 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 500 mm
used
This PANHANS EURO 5 Wood working machine was manufactured in the year 2009 in Austria.
used
4 axes machining dimension max Y1650 mm - X4600 mm Machining in height Z180 mm 14 position tool magazine 8 SCHMALZ brackets the machine is plugged in, testing is possible
used
Technical data Capacity of the machine: Dressing diameter: 75 - 250 mm Flank angle: 0 - 180 ° Rotation speed: 60 rpm Dressing wheel: Diameter: 100 mm Width: 50 mm Bore: 20 mm Rotation speed: 2800 rpm Voltage 50 Hz 3x: 380 Volt Total installed power: 0.35 kW Machine´s weight about: 350 kg Overall dimensions machine: Length: 1200 mm Width: 550 mm Height: 1500 mm
used
Technical data Longitudinal travel (X-axis): 130 (Ø 260) mm Vertical travel (z axis): 360 mm Spindle nose: ISO: 40 Machine´s weight about: 45 kg Dimensions: Length: 512 mm Width: 406 mm Height: 827 mm
used
Technical data Table length: 900 mm Table width: 530 mm
used
Technical data Table length: 700 mm Table width: 350 mm
used
Technical data Work-pieces: from diameter: 0.8 mm up to diameter: 18 mm Length from: 10 - 600 mm Cutting-off wheel diameter: up to: 100 x 1.0 mm Bore: 20 mm Number of cutting-off wheels: 1 x Diameter of grinding wheel: 100 x 50 x 20 mm Spindle speeds: from: 2160 rpm up to: 4450 rpm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 900 mm Width: 600 mm Height: 1200 mm Various accessories: Coolant system
used
Technical data Units: horizontal: 2 Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 1700 mm Various accessories: Cast-iron base
used
used
Technical data Voltage 50 Hz 3x: 380 Volt
used
Technical data Cross table Execution: Horizontal Clamping surface: Length: 270 mm Width: 175 mm Travels: longitudinal: 120 mm Crosswise: 120 mm Number of T-channels: 4 T-channel width: 10H7 mm Dimensions: Length: 350 mm Width: 250 mm Height: 200 mm
used
Technical data Voltage 50 Hz 3x: 380 Volt Dimensions: Length: 1200 mm Width: 800 mm Height: 1200 mm Various accessories: Magnetic separator Paper filter facility
used
Technical data Longitudinal travel (X-axis): 40 mm Transversal travel (y-axis): 45 mm Dimensions: Length: 550 mm Width: 350 mm Height: 600 mm Various accessories: Projector: Screen diameter: 100 mm
used
Technical data Machine´s weight about: 50 kg Overall dimensions machine: Length: 700 mm Width: 400 mm Height: 250 mm
used
Technical data transfer printing process machine Execution: Elektro-pneumatic Printing block dimensions: Length: 80 mm Width: 80 mm Dimension of the workpice: Diameter: 50 mm Imprint dimension: Length: 50 mm Width: 50 mm Production: 2400 pce/h Air consumption min.: 6 atm Air consumption about: 2.3 m3/h Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 75 kg Overall dimensions machine: Length: 600 mm Width: 540 mm Height: 350 mm
used
Technical data Cross table Execution: Horizontal Clamping surface: Length: 350 mm Width: 260 mm Travels: longitudinal: 250 mm Crosswise: 250 mm Table height: 182 mm Number of T-channels: 5 T-channel width: 14H7 mm Machine´s weight about: 80 kg Dimensions: Length: 400 mm Width: 300 mm Height: 200 mm
used
Technical data Taper in spindle: 50 ISO Machine´s weight about: 70 kg Overall dimensions machine: Length: 700 mm Width: 300 mm Height: 500 mm
used
Technical data Speeds from: 25´000 rpm Speeds up to: 60´000 rpm Diameter: 50 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 0.2 kW Machine´s weight about: 5 kg Overall dimensions machine: Length: 250 mm Width: 175 mm Height: 175 mm
used
Technical data Max. drilling diameter: 10 mm Stroke max.: 70 mm Overall dimensions machine: Dimensions: Length: 1850 mm Width: 700 mm Height: 2400 mm Various accessories: Coolant system Cast-iron base
used
Very little used CNC machining center for wood and plastics. In addition, a chip extraction unit with 3 capacitive filters of 10 kw has been added.
used
Capacity (x): 1 Process Application: 1 Other Info: 1 AMF Spanntechnik - K20 - 554755 Zero Point clamping modules (6 x) Type: K20 - 554755 YOP: 2016 2 x AMF PowerTube 46 with 60 Bar to ope/clamp 4 x AMF K20 model with diameter 110 mm 2 x AMF package hose / tube / cables Zero point clamping system improving set up time optimized clamping during cutting and non cutting machining. Pull-in locking force 17 kN Holding force 55 kN Length:170 mm Width:170 mm Height:60 mm Weight:2,6 kg
used
Machine dimensions: 2900 x 1200 x 2000 mm Press dimensions: 2000 x 500 mm Press thickness: 20 – 350 mm Electric power: 14Kw/h, 40A Voltage frequency: 400V / 50Hz / 3P + N + PE Pressing power: 3200kg Production capacity: 1000 – 3000 m² per day Weight: 1000kg Mold weight: 100kg Emergency stop button: Yes
used
This ORMA C/6 30/13 AS-BA was manufactured in 2009. A robust woodworking machine featuring a plate length of 3000mm and width of 1300mm, capable of hot working with a total pressure of 30T. It weighs 1450kg, ensuring stability during operation. A solid choice for enhancing your production line. For more information about this woodworking machine, please reach out to us.
used
Esseteam/maxima Work Center With Two 1500mm Tables Tool Holder With 12 Pieces Vertical Drilling Group With 18 Drills / Horizontal With 8 Drills, Two Tupias, Engine With Circular Saw And Drill With 360 Rotation.
used
Press-wire with HDTV automatic assembly for doors model Door Assembler 2800 (MH9328) Quantity: 1 Location: Kaliningrad Release year: 2020 Country of origin: China Optional: Press-wire with HDTV assembly automatic door model Door Assembler 2800 (MH9328) Min. door leaf size: 1000x450mm, Max. door leaf size: 2800x1400mm, Max. workpiece section: 150x60mm, total power: 8.9 kW.
used
Working area: 2890mm x 900mm x 80mm, axis working paths: X/Y/Z: 3270mm/1200mm/115mm, max. vector axis speed: 75mm/min. Spindle speed: 1200-18000rpm, max. panel thickness: 80mm, control: TRIA 7500. Dimensions X/Y/Z: 4400mm x 2865mm x 2350 mm, weight: 3000 kg. Defects: Screen, ball bearing of the Z-axis.
used
used
used
Without wheelbarrow
used
Tested for function
used
Afzuiging
used
Wood Milling Machine Fabr. MARTIN Type T 21 AVMachine -No: 71662 Year 1969Speeds: 3000/4500/6000/9000 rpm.Voltage: 380Vpole-changing motor: 6.4 / 7.8 hpMotor protection switch: 2With- Feed device- Sliding table with 1270 mm working distanceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Vertical wood milling machine (router) make SCM type T 120 CMachine -No: 1170480, built in 1980Table size: 1100 x 900 mmTable height: 850 mmvertical adjustment of the spindle: 185 mmSpindle diameter: 35 mm5 spindle speeds: 2900 - 10000 rpm.Max. Diameter of tenon cutting disc up to: 400 mmDrive power: 7.5 hpWeight approx.: 610 kgOutside dimensions approx. 1120 x 900 x 850 mmWith- mot. Roll feedused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Notching machine make ROTOX type SAF 164Machine -No: 164-839 built in 1985Technical specifications:machinable profile width: 50 - 300 mm 90 °machinable profile height: 50 - 180 mmMilling hole: 40 mmDrive power: 2.2 kWWith- Miter guide with 1 ° scale and gridused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools