pco 1881 used for sale

Capper AROL – pre-threated plastic cork PCO 1881 4 capping heads Suitable for plastic corks PCO 1881 – 28 mm Speed: 8.000 BHP Counterclockwise direction Year 2000 Machine without electrical panel because it worked in sync with the filler

PET PREOFRM Injection Mold Hotrunner : PET Injection Mold Manufacturer: HUAYAN HR 61 Hotrunner from the manufacturer Husky Year of construction: 2010 General overhaul 2017 Sketch see PDF Cavity: 48 cavities Preform: 21.7 g (PCO 1881) with mould and thread set as well as cooling mould

; Gross weight [kg]: 8250; Engine: Cummins KTA38-G5; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

; Gross weight [kg]: 14280; Engine: Cummins KTA38-G5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger

; Gross weight [kg]: 16600; Engine: Cummins KTA50-G3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger

; Gross weight [kg]: 10213; Engine: Cummins KTA50-G3; Accessories: Battery, Control Panel

Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS

Safety relay, safety control, emergency stop switch device -Manufacturer: Moeller, safety relay unused in original packaging -Type: ESR4-NO-21 18815873 -Voltage: 24V AC/DC -Quantity: 1x relay available -Dimensions of cardboard: 130/105/H30 mm -Weight: 0.2 kg

Qty. 1 Second-hand blower and PET filling line Mfc.: SIG (Germany), KHS (Germany), Robopack (Italy) Built: 2006 / 2007 Stopped: 10 / 2020 Product: Beer Cap type: PCO 1881 Technical Data 1. Blowing machine Mfct.: SIG Type: Blomax 6 Year: 2007 Cap Type: PCO 1881 PLC type: ABB controller Consisting of: Blowing machine pre-form feeder (without tipper) chiller (Mfct.: Riedel, 2007) Capacity: at 2 litres: 8,400 bottles / h at 1.5 litres: 10,500 bottles / h at 1 litre: 10,500 bottles / h 2. Filler Mfct.: KHS Type: INNOFIL EM/125/R/PET 54 / 9 / Rinser 36W Year: 2007 Total working hours: 90,000 Product: Beer Cap type: PCO 1881 Consisting of: Rinser, Filler, Capper (incl. cap feeding system) Cap feeding system: Mfct.: Hormes, Year: 2007 3. Cleaning system / CIP station Mfct: KHS Type: Innopro – CIP Year: 2007 Consisting of: Stainless steel tan ...

• Corker AROL for pre threated plastic cork pco 1881: • Year: 2000 • Producer: AROL • Speed (BPH): 8.000 bph • Direction: Counterclockwise • Suitable for palstic pre-threated cork pco 1881 28 mm. • 4 heads. • Safety protections. • Code X 20

Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000                   Number of moulds: 18            Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:                     Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storag ...

Offer here various spare parts from a SIG Blomax 20 Series 3 yoc. 2006. 220. Transport mandrels z. Teil neu. Conversion kit to PCO 1881. Mother moulds, Kpl. blowing stations. Heating box etc. see also pictures

PET PREOFRM injection mould Hotrunner : PET injection mould Manufacturer: HUAYAN HR 61 Hotrunner from the manufacturer Husky Year of construction: 2010 General overhaul 2017 Sketch see PDF Cavity: 48 cavities Preform: 21.7 g (PCO 1881) with mould and thread set and cooling mould

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2001 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

Overview The Triblock consists of a rinser, filler and capper and was manufactured by Sasib/Sarcmi in 1993. It is an isobaric machine for the production of still and sparkling water or CSD. Techn. Details Capacity: 22.000 bph Worked formats: PET 0,45l & 0,66l Cap type: PCO 1881 plastic screw Number of rinser stations: 90 Number of filling stations: 90 Number of capping stations (AROL capper): 15 Rinsing machine with integrated recirculation system Filling with differential pressure system Filling machine equipped with star clutches with quick format change Capper equipped with quick format change Original mechanical filling valves brand Simonazzi Revamping of electrical panel with Siemens S7 E300 PLC Cap hopper not included

3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881

COMPLETE NON-CARBONATED ASEPTIC (PRESERVATIVE-FREE) UHT FILLING LINE FOR DRINKS In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a built-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. The plant is installed and in excellent regularly maintained condition. Products: vitamin drinks, filtered/ ...

Qty. 1 Second-hand PET blowing and water filling line Mfc.: Tanner AG, SACMI, FT System, Krones & others Built: 2005-2013 Capacity: 12,000 bph on 1.5 L - Pack 3X2 16,200 bph on 0.5 L - Pack 4X3 16,200 bph on 0.35 L - 4X3 pack Product: Still and sparkling water Cap: 28 mm PCO 1881 Mould series: 3 sets of moulds for 0.35 L/0.5 L/1.5 L Note: The line is in production until the end of October 2023 Various new mechanical and electrical spare parts to the value of EUR 200 k are available with the line.

Overview  The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l)  Formats: 500ml, 750ml, 1.000ml, 1.500ml  PCO 1881  Operating voltage: 400V/ 50 Hz   Control voltage: 24 VDC  Scope of delivery  Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008  Preform feeder | Transver AG | - | 2008 Silo  Elevator  Sorting Chute

for cap type PCO 28-1881 with Siemens S7 PLC Capacity: approx. 40,000 caps/h with sorting unit with cap control incl. approx. 18 m feeder with 2 blowing stations

Original Molds for SIDEL SBO 10 totally 12 sets, year 2017 JADE has 12 sets of 10+1 pc PET bottle blow molder aluminum molds for sale, all made by SIDEL France in year 2017. Molds were used in SIDEL SBO 10 blow molder with energy saving air recovery system type SIDEL AirEco. Molds are for PET bottles from 250 ml to 2.0 liters with neck standard PCO 1881 (short neck) product being still and sparkling water. This SBO 10 was operated only 16 months (with 12 sets of molds) and thus molds are in excellent condition. Delivery will include also standalone shelves for holding the moulds safely in production and two sets of stretch rods

QT 654 | Filling Monoblock PROCOMAC • Year: 2001 • Speed: 12.000 Bph • Model: HAL ADV 36.45.6 • Direction: Counterclockwise • RINSER • Number of clamps: 36 • Mobile nozzle • Single treatment • Filler • Number of valves: 45 • Type of filling: isobaric • De-gassing and sanification • CAPPER AROL Pick & place • Number of heads: 6 • Type of cap: PCO 1881 • Bottle formats: 300 ml Ø 59 H 205 600 ml Ø 68 H 238 • Machine reconditioned on 2020 • Safety protections

01 Product to be filled CSD 02 Type of Bottle RoundBottles 03 M O C of the Bottle PET Bottles 04 Fill Volume Bottle sizes 500ml 05 Type of Caps Screw Caps 06 Type of Labels BOPP 07 Output required 416 Bottles Per Minute on 500 ml BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION Used blow molding machine for PET bottles with production capacity up to 25 000 bph with the 500ml format Year of construction 2007 Used blower complete with Octagon tipper Air recovery system preform hopper This machine is immediately available for sale and in case of request we can carry out pre production maintenance Detached from production in fully functional status is excellent opportunity for used equipment We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request Air conveyor system NEW used revised 2024 NEW RINSER FILLER SCREW CAPPER SPORT CAPPE ...

Overview The blow moulder was built in 1999 by French manufacturer SIDEL. The machine is in very good working condition, still in production and can be viewed in person. Techn. Details Current capacity: 23.400 bph at 1.25L Working hours: 40.000                   Number of moulds: 18       Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:                     Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control

Ultra Clean Filling Line Krones 22000 bph for CSD in PET bottles - 2010 Complete ultra clean filling line for carbonated soft drinks, cider, water made by Krones and GEA in 2010. The line has been always serviced by Krones service and thus in excellent condition. Blow moulding, rinssing, filling and capping compartment of the line is ultra clean. All these machines are connected to each other’s and they are forming a closed ultra clean compartment where bottles are transferred without conveyors from machine to machine. Filling valves are sterilized with steam and the rest with Preracetic Acid C2H4O3 solution. Process department is made by GEA and it can produce various aseptic products and other beverages. Packing department has very versatile Krones Variopac Pro for shrink, shrink tray and carton boxing and a new in year 2015 Krones Robopox palletizer. Main Characteristics M ...

Overview  The blowing machine was manufactured by Sidel in 2004 and has only been used by a mineral water company. The machine has been regularly maintained and is in good condition. The seller bought a bigger machine, therefor this machine is available for sale. Technical Details  Capacity: 9,600 bph with 1.5 l and 12,000 bph with 0,5 l Number of cavities: 8 Formats / moulds included: 1,5l Bottle neck: PCO 1881 and 29/25 Additional equipment  Preform kipper Preform hopper Preform feeder

HAAS SWAK 40 for waffle chopsticks Manufacturer: HAAS Model: SWAK 40 Factory number: 18812 Waffle blade dimensions: 460 mm x 315 mm 40 baking plates - 120 rods per baking plate Dimensions: Net Weight: 10,200 kg Length: 6.665 mm Height machine head: 2,030 mm Height baking machine: 1,290 mm Gas oven HAAS RAISES DISPUTE DANGER

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Max. internal grinding diameter: 20 mm Centre height: 60 mm Distance between centres: 150 mm Workpiece spindle speeds: number (steps): 3 from: 560 rpm up to: 1000 rpm Spindle hole: 12 mm Taper in spindle:: 12 W Possible grinding-spindle speeds: from: 6000 rpm up to: 9000 rpm Rotatable grinding spindle head (b-axis): +45 / -45 ° Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 900 mm Width: 750 mm Height: 1300 mm Various accessories: 3-jaw chuck diameter Horizontal grinding spindle support Set of flanges Set of collets: W 12 Steady External grinding spindle

10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system

Closing heads ALCOA for plastic screw caps pick-and-place PCO 28 mm tested and ready to work

1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...

Preform Weight (Max): 30,5 g // Neck Type: PCO

Angebot / Offer: CMEC-HY Cap 48 Year: 2009 MOULD Cavities: 32x Closure Type: PCO 1810 standard Closure Weight: 2.5 gr Cycle time: 6 sec Hourly output: 19200 pcs Control: Siemens S7 Hours: 3200 hrs Dimensions: (LxWxH) 7.30 m x 2.40 m x 2.60 m

Capping heads KRONES for plastic screw caps Pick-and-place PCO 28 - 1810 like new

Nova BioProfile Flex Automated Cell Culture Analyzer BioProfile is an automated cell culture analyzer that measures up to 15 important cell culture attributes. By combining up to five separate instruments into one easy-to-use instrument, BioProfile FLEX simplifies workflow and saves time, labor, and operating costs compared to multiple instruments. The FLEX automatic sampler takes samples from its two fermenters and transmits them to the measuring unit of the FLEX analyzer. The data obtained from the FLEX autosampler were compared with data taken manually from the reactor and their statistical analysis was performed. Specifications Sample analysis time: 2.5 minutes (gases only – PO 2 + PCO 2 ), 4.0 minutes (Chemistry/Gas and Osmolality), 6.25 minutes (all 15 tests), Operating temperature range: 15-30 °C (59-86 °F), Relative operating temperature Humidity range: 20-85 ...

PET-Filler, make: H&K, type: VVF112/14SV, with 112 Filling valves, with 120 mm pitch, with 14-head screw capper make Alcoa für PCO 28 caps, built 1985

Compressor/Atlas-Copco/mobile Type XAHS 186 DD Year of construction 2008 In the case of the 1881 h Motor 104 KW Weight 1975 kg ABE K 582 Green license plate Location Lower Saxony, currently in the service workshop I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. The offer prices are gross and negotiable! The included VAT will be shown on the invoice. Dismantling, loading and shipping on request! I will be happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp)

SIDEL SBO 12 serie 2 blow-moulding machine for 12 moulds. Personalization for preform neck PCO 28. The manufacturing year is 2002 and the capacity is 15.000 BPH. Machine equipped with : - Preforms tipper & hopper - Electrical cabinet - Sidel control panel The machine is no more in production and is already professionally dismantled. The machine is in good condition. If you are interested by this machine, you can contact us by mail for further information and discuss about the availability.

SIDEL SBO 14 Universal PET blow-moulding machine for 14 moulds. The manufacturing year is 2006 and the capacity is of 28.000 BPH. The machine is equipped with a quick change or shell moulds. Personalization for preform neck PCO28 1810. Machine equipped with: - Preforms tipper - Preforms hopper - Electrical cabinet - Sidel control panel & PCC - Air conveying system in option The machine is in very good condition which makes it a good opportunity. If you are interested by this machine, contact us for further information and to discuss the availability.

This HTW PCO 1810 injection mold for injection moulding machine was manufactured in the year 2018.

Blowing machine SIDEL SBO 14 / 14 Universal year of manufacturing: 2006 neck type: 28 mm PCO 1810 capacity: 22.000 bph Electric: Siemens 400 Working hours: approx. 40.000 hours

Refrigerant: R407F; Class: 4BII;

Refrigerant: R407F; Class: 4BII;

Sidel PET filling ling products: drinks with Co², beer capacity: 12.000 bph per 1,5 ltr. It is possible to turn on individual machines of the line in a dry state. bottle formats: 500 ml 700 ml, 1.500 ml all neck bottle formats: PCO 28 - 1810 1. Blow molding machine Sidel SBO 10 year of manufacturing: 1999 2. Cooler for SBO 10 year of manufacturing: 1998 3. Preform hopper Sameto Technifil Year of manufacturing: 1999 4. Preform conveyor Sidel year of manufacturing: 1998 5. Compressor SIAD year of manufacturing: 1999 and cooling for the compressor 6. Air conveyor RAFALE year of manufacturing: 12/1998 7. Mixer 240 C, Moravek 'CFT year of manufacturing: 2000 8. Tribloc Alsim PET r.v. for 60 filling taps year of manufacturing: 2000 9. Labelling machine Krones Contiroll year of manufacturing: 2004 10. Slat conveyors year ...

Bottling line PET ISO | 15.000 bph Year: 2001 – 2012 Blowing machine SMI SR10 | 2010 Formats of 05L-1L-1.5L Cap 28 mm PCO CORVAGLIA e 267 NOVEMBAL ALASKA 10 cavities Filling monoblock MELEGARI 50.70.10 | 2001 Rinser 50 clamps Filler 70 valves | isobaric Capper 10 heads Carbonator MELEGARI Labeller P.E. rollfed | 2012 12 heads Shrink wrapper SMI SK 600F | 2001 Handler SMI MAB 60 | 2001 Palletizer EMMETI | 2001 Air conveyors ZECCHETTI | 2001 Safety protections on all machines

PET-LINE 60N/95 complete system for preforms PCO consisting of: 1. PET Injection system Netstal PET 2000-3700 R 2. 60 cavity injection mould Otto Hofstetter AG (27 gr) 3. 60 cavity injection mould Otto Hofstetter AG (30,5 gr) 4. Dryer Piovan 560 kg/h 5. Air dehumidifier RPA 1200, 1200 m3/h 6. Compressor Aircenter SM 12, 60 m3 7. Water chilling unit Chiller CA1921MT 8. Water chilling unit Chiller CA0621MT Manufacturer: Otto Hofstetter AG Year of production: 2012 Installed power: 462 kW. Working hours: 7285 h

Fine reading device, illuminated measuring device for length displays OFD, FEINMESS DRESDEN FAE 4 18812 scale value: 0.002 mm bulbs: 6 V 5 W with 3 spare lamps approx. 1.5 m connection cable used, tested ! 178 x 80 x 120 mm Dimensions (packaging): 310 x 190 x 110 mm

Preform Weight (Max): 32,5 // Neck Type: PCO

Electric motor, three-phase motor, brake motor -Power: 0.45 kW -Speed: 1300 rpm -Shaft: Ø 14 mm -Brake: 6 Nm -Construction: B3 -Protection class: IP 54 -Number: 1x available -Dimensions: 300/190/H145 mm -Weight: 8.7 kg