paper sheeter used for sale

Handle hole punch (bags) -Knuckle punch with punch and die for 20 x 90 mm handle hole -Suitable for bags or paper bags

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 640 Technical data Number of axis simultaneous: 5 Rotary table:diameter: 150 mm Table load max.: 25 kg Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 200 mm Vertical travel (z axis): 385 mm B axis swivelling range: -110 / +30 ° Table speeds: stepless up to: 4000 rpm Holding torque of the table: 400 Nm Tool changer: Number of tools: 96 Tool diameter max.: 50 mm Tool lenght: 130 mm Max. tool-weight: 1 kg Time of tool changing: 0.8 sec Average chip-to-chip time: 3 sec Spindle nose: HSK: E40 Spindle speeds: stepless up to: 42000 rpm Rapid traverse:: 60 m/min Acceleration: 10 m/s Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 10 / 15 kW Torque max.: 8 / 12 Nm Machine´s w ...

paper cutter polar EMC program, monitor, airtable, monitor, spare knife, immed in our stock

Min. size 350 x 500 mm / 920 x 1260 mm Speed of 5,000 c / h Quick clamping system in the stripping station Paper 80 g / m2 Cardboard max 2000 g / m2 16 heating zones Temperature 50 ° to 160 ° Autoplaten concept Stripping

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 426 / 430 Operating hours: 24453 Technical data Number of axis total: 3 Number of spindles: 1 Table length: 1050 mm Table width: 590 mm Number of T-channels: 8 Distance of the T-slots: 63 mm T-channel width: 14H7 mm Table load max.: 400 kg Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 450 mm Tool changer:: TC 30 Tool diameter: 90 mm Diameter with free adjacent pockets: 110 mm Tool lenght: 250 mm Max. tool-weight: 6 kg Time of tool changing: 5 sec Average chip-to-chip time: 7 sec Spindle nose: HSK-A: 63 DIN 69893 Spindle speeds: stepless from: 100 rpm up to: 20000 rpm Feed range: 1500 mm/min Rapid traverse:: 22 m/min Air connect: 6 - 7 bar Voltage 50 Hz  ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of axis total: 4 Longitudinal travel (X-axis): 700 mm Transversal travel (y-axis): 630 mm Vertical travel (z axis): 700 mm Dimension of the workpice: Width: 700 mm Table load max.: 500 kg Table divisions (B): 0.001 ° Table speed: 30 rpm Holding torque A-axis: 4000 Nm Tilting moment: 8000 Nm Pallets: number: 10 Length: 500 mm Width: 500 mm Maximum workpiece weight: 750 kg Time of changing palets: 7 sec Tool changer: Number of tools: 130 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 150 mm Tool lenght: 350 mm Max. tool-weight: 10 kg Time of tool changing: 2.5 - 4.5 sec Average chip-to-chip time: 4 sec Spindle nose SK: 40 DIN69871-A40 Spindle speeds: stepl ...

For the columns and crushing of wrapped paper, cardboard or plastic rollers on core. Engine power 7, 5kW 16Ampere control PLC supported with two-hand safety control - key-operated switch - emergency off pull cord - cutting force 30 to - speed ca. 17, 3 mm / sec - cutting Canal to process roles of maximum roll length approx. 1500 mm max roles dur diameter approx. 800mm - weight of the machine ca. 2900 kg - noise <80dB(A) - hydraulic pressure 200 bar - tank capacity 90Liter - hand guards machine available now Subject to prior sale Price and further details on request

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series Technical data Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 520 mm Vertical travel (z axis): 510 mm Tool magazine number of tools: 64 Tool diameter max.: 78 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 300 mm Max. tool-weight: 5 kg Average chip-to-chip time: 3.3 sec Spindle nose: HSK-A: 63 DIN 69893 Spindle diameter: 70 mm Spindle speeds: stepless up to: 10000 rpm Feed range: 1 - 10000 mm/min Rapid traverse:: 60 m/min Max. Feed force: 7000 / 12000 N Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 22 / 51 kW Total power required: 80 kVA Machine´s weight about: 9000 kg Overall dimensions machine: Length: 5027 mm Width: 2628 mm Height: 3278 mm Space requireme ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: FANUC Series Oi-TD Operating hours: 6000 Technical data Number of spindles: 4 Min. grinding diameter: 3 mm Max. grinding diameter: 200 mm Workpiece length max.: 600 mm Swing diameter: Above the workpiece table: 230 mm In front of the workpiece table: 350 mm Centre height: 130 mm Centre height over slide: 200 mm Axial motion: Longitudinal travel (Z-axis): 500 mm Cross travel (x-axis): 120 mm Spindle head (u axis): 150 mm Feed range: Z axis (longitudinal travel): 0 - 99.99 mm/min X axis (transversal): 0 - 99.99 mm/min Rapid traverse Z: 15 m/min Rapid traverse X: 5 m/min B axis swivelling range: -32 / + 2 ° Resolution: 0.0001 ° Grinding spindle head: Resolution: 0.001 Air connect: 5 bar Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 4.3 ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Operating hours: 31677 Technical data Centre height: 175 mm Distance between centres: 650 mm Grinding wheel right and left hand Max. Longitudinal travel: 700 mm Grinding weehl left side: Diameter: 400 mm Width: 80 mm Bore: 127 mm grinding wheel width: 80 mm Grinding wheel right side: Diameter: 400 mm Width: 40 mm Bore: 127 mm Workpiece weight on centres max.: 130 kg Grinding wheel speeds: number (steps): 6 from: 1500 rpm up to: 2400 rpm Peripheral speed: 35 m/s Hydraulic cross travel: 300 mm Angular displacement: 180 ° Work piece spindle head: speeds: stepless from: 60 rpm up to: 600 rpm rotatable: 0-90 ° Spindle taper:: 5 MT Taper in tailstock:: 3 MT Table angular displacement: 12 ° Table speed: from: 0.05 m/min up to: 9.0 m/min Voltage 50 Hz 3x: 400 Volt External Grinding wheel motor ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 18i-MB Technical data Number of axis total: 3 Table length: 1200 mm Table width: 625 mm Table load max.: 1200 kg Longitudinal travel (X-axis): 1100 mm Transversal travel (y-axis): 625 mm Vertical travel (z axis): 500 mm Tool changer: Number of tools: 24 Tool diameter max.: 80 mm Tool lenght: 250 mm Max. tool-weight: 7 kg Spindle nose SK: 40 Distance spindle nose to table: 150 - 650 mm Spindle speeds: stepless up to: 15000 rpm Work feed rate: 12 m/min Rapid traverse: long.: 40 m/min Rapid traverse: transversal: 40 m/min Rapid traverse: vertical: 30 m/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 11 / 18.5 kW Total power required: 45 kVA Machine´s weight about: 9710 kg Overall dimensions machine: Length:  ...

we sell 1 of 2 used tray / carton setup with an additional magazine for a package leaflet or e.g. Spoon that is placed in the box and glued to the bottom. The tray / carton erector has 2 Nordson hot glue devices (Pro Blue) each and is completely built in V2 A (also the control cabinet). The system is adjustable in terms of cardboard height and width as well as length, but are set to a currently fixed level. The systems are in a very good used condition as they were in stock after a factory closure (optical condition is almost as new). The special feature of the system is that a vision system (by KEYENCE) is installed in the system, which can check a correct insertion of the package leaflet or the spoon and can stop the system if it is not executed correctly (looks at the tray from above). The system is immediately available and could also be converted to other tray types (stacking corner ...

Paper Shaker with scraping roller Baumann BSB 3/L, built 1988, serial number 210277, in good condition, available immediately

Surface grinders - horizontal ELB-SCHLIFF SWBE 10 PLC Second-hand machine Mint Control cabinet, motors, wiring, control new Hydraulic new, trim, loop length: 1000 mm Grinding width: 500 (600) mm Workpiece height: 600 mm Table size: 1000 x 550 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 5-35 m / sn Total power: 18 kW Machine weight approx.: 5,5 t Space requirement approx.: 3.5 x 2.5 x 2.5 m General outrun 2019 with 12 month warranty Paper machine Levelling feet Installation included Instruction includes

Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm

Stock number 1105-02617 Machine type flat grinding machine Make Elf Type OPTIMALLY 4250 NC-K Built in 1993 Control type NC Storage warehouse Country of origin Germany Delivery time immediately Exhibition Hall, ver free freight basis Technical details Grinding length 450 mm Grinding width 250 mm Workpiece height 375 mm Table length 800 mm Table width 250 mm maximum work-piece weight 400 kg Autom. Cross feed adjustable 3-50 mm / stroke Vertical delivery, 1 Division 0.001 - 0.06 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel diameter 36 mm Voltage 380 V Grinding spindle motor 3.7 / 4.7 kW Total power demand 9 kW Machine weight approx. 2.6 t Space requirement of approx. 2800 X 2500 2300 mm Additional information automatic delivery -Electro magnetic clamping plate with straight fine pole pitch, dimens ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 12463 Technical data Number of axis simultaneous: 3 Table length: 700 mm Table width: 630 mm Table load max.: 800 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 500 mm Tool magazine number of tools: 30 Tool diameter max.: 75 mm Tool lenght: 210 mm Max. tool-weight: 2.5 kg Spindle nose: HSK-A: 63 Spindle speeds: stepless from: 100 rpm up to: 24000 rpm Rapid traverse:: 30 m/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 12.5 / 22 kW Total power required: 26 kW Time under power: 43869 Hour Operating time: 12463 Hour Working time: 26214 Hour Spindle run time: 8612 Hour Noise level: 75 dB (A) Machine´s weight about: 8300 kg Overall dim ...

Laminator - paper over board Zoccatelli Model 1450 Year 2001 Workingwidth 1450 mm Substrate Feeder automatic suction feeder by vacuum belts Laminate Feeder by hand Details with pressing belt Delivery delivery on a table Footprint 210 x 780 cm Condition sold refurbished on most parts (ask details) Available Direct or very soon

Gluing machine for paper Tränklein Model ZW 300 Year 1995 Width 300 mm Options for PVA glue Available Direct

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 34729 Technical data Number of axis simultaneous: 4 Table length: 900 mm Table width: 600 mm Table load max.: 800 kg Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 500 mm Tool magazine number of tools: 50 Tool diameter max.: 75 mm Tool lenght: 210 mm Max. tool-weight: 2.5 kg Spindle nose: HSK-A: 63 Spindle speeds: stepless from: 100 rpm up to: 24000 rpm Voltage 50 Hz 3x: 400 Volt Spindle motor: 12.5 / 22 kW Total power required: 26 kW Noise level: 75 dB (A) Machine´s weight about: 8300 kg Overall dimensions machine: Length: 4000 mm Width: 3700 mm Height: 2500 mm Various accessories: Paper filter facility Chip conveyor Dividing attac ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 100 mm Distance between centres: 680 mm Max. Longitudinal travel: 620 mm Max. transversal travel: 45 mm Grinding wheel: Diameter: 500 mm Width: 80 mm Bore: 203.2 mm grinding wheel width: 80 mm Grinding wheel speeds: number (steps): 3 from: 1150 rpm up to: 1550 rpm Angular displacement: 3 ° Work piece spindle head: speeds: stepless from: 65 rpm up to: 500 rpm rotatable: 360 ° Spindle taper:: 4 MT Taper in tailstock:: 3 MT Spindle stroke: 20 mm Shearing force: 4 - 15 kp Table angular displacement: 9 ° Table speed: stepless up to: 5 m/min Voltage 50 Hz 3x: 380 Volt External Grinding wheel motor: 5.5 kW Workhead spindle motor: 0.7 HP Total power required: 10 HP Machine´s weight about: 2900 kg Overall dimensions machine: Length: 2300 mm Width: 1800 mm Height:  ...

Butterpack machine, margarine packaging machine, packing machine Stations: Swivel cell Paper fending and folding equipment With photo cells pressure centering Date stamp station with thermal pressure Volumetric dosage with trough Final folding station Parcel launch station Exhauting tape 1,000 mm long Format: 100 x 75 x 35 mm = 250 size or other format for additional price Products: Butter or similar products Dosage: Volumetrical 100 â 250 grams, infinitely adjustable Dosage accuracy: +/-1% Unwrap material: Parchment, concealed aluminium foil Date: Dye-stamp print Power: 40 packages/min.

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 16-GC Operating hours: 42727 Technical data Centre height: 175 mm Distance between centres: 1000 mm Workpiece weight on centres max.: 130 kg Workpiece dimensions: Grinding weehl left side: Diameter: 400 mm Width: 80 mm Bore: 127 mm Grinding wheel right side: Diameter: 400 mm Width: 80 mm Bore: 127 mm B axis resolution max.: 5 ° B axis swivelling range (automatic): 15° + 205 ° Grinding wheel speeds: number (steps): 2 up to: 1670 / 2110 rpm Peripheral speed: 35 m/s Rotatable grinding spindle head (b-axis): 5 ° Revolving unit with Hirth serration Longitudinal slide: Max. travel: 1050 mm Resolution: 0.0001 mm Feed speed up: 0.0001 - 10000 mm/min Transversal slide: Max. travel: 275 mm Resolution: 0.0001 mm Feed speed up: 0.0001 - 10000 mm/min Work piece spindle ...

X 2000 mm Y 1700 mm Z 1250 mm W 730 Spindle diameter 110 mm kwW/Nm (S1) 19.5/951 3000 U/min Table 1400 x 1600 mm, table load 10 t T-grooves 22H8 Control HH 640 HR 510 ATC 40 H Coolant 70 bar on the power unit, with paper belt filter and oil separator Fixed cabin Spindle support 250 mm ISO 50 Immediately available!

Stepped end and flush cut tuber, 4 plies, 3 colour tail end printer, photo cell for preprinted paper, web guide units

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: Marposs E 14 Technical data Centre height: 100 mm Distance between centres: 450 mm Workpiece weight on centres max.: 80 kg Grinding wheel: Diameter: 500 mm Width: 80 mm Bore: 203.2 mm Grinding wheel speeds: number (steps): 3 from: 1150 rpm up to: 1550 rpm Rotatable grinding spindle head (b-axis): 1 ° Work piece spindle head:: HTG 1100 speeds: stepless from: 10 rpm up to: 300 rpm rotatable: 360 ° taper in spindle: MT: 4 Taper in tailstock:: 3 MT Table speed: stepless from: 0 m/min up to: 5 m/min Max. table angular displacement: 8 ° Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 5.5 kW Workpiece spindle motor: 0.72 kW Total power required: 13 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3500 mm Width: 2000 mm Height: 2300 mm Various accessories: Co ...

Format: A3 // Paper format: ca 31x45cm

Used KERN K980 paper-endless cutting machine. The continuous cutter meets all the requirements of computer printout processing at maximum speed. The proof is 34,200 high-quality cuts per hour.

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: TRAUB SYSTEM TX 8i-p Operating hours: 46441 Technical data Number of axis total: 7 Number of spindles: 2 Turning length: 180 mm Number of axis total Max. bar diameter: 20 mm Spindle speeds: stepless up to: 8000 rpm Longitudinal travel (Z-axis): 205 mm C axis (spindle,resolution): 0.001 ° Back spindle: up to: 6400 rpm C axis (spindle,resolution): 0.001 ° Turret slide: number: 2 Upper turret head: number of tools: 8 number of driven tools: 8 Spindle speeds (turning tools): 12000 rpm X axis: 120 mm Lower turret head: number of tools: 7 number of driven tools: 7 Spindle speeds (turning tools): 6400 rpm X axis: 120 mm Z axis: 250 mm Y axis: -20 / +40 mm Counter-operation: number of tools: 7 number of driven tools: 3 Voltage 50 Hz 3x: 400 V ...

Precision flat grinding machine Manufacturer: COSMOS Model: Earth 1050 NC Built: New factory Grinding length: 1000 mm Grinding width: 500 mm Grinding height: 400 mm Electric magnetic release plate 1000 x 500 mm Single fitters at the table firmly assembled for straight judting with compensation Programble display 4.7 " Unseated grinding spindle drive Universal paper tape filter

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 16-GC Operating hours: 34900 Technical data Centre height: 175 mm Distance between centres: 1000 mm Workpiece weight on centres max.: 130 kg Grinding weehl left side: Diameter: 400 mm Width: 40 mm Bore: 127 mm Grinding wheel right side: Diameter: 400 mm Width: 63 mm Bore: 127 mm B axis resolution max.: 0.001 ° B axis swivelling range (automatic): 15° + 205 ° Peripheral speed: 35 m/s Max. travel: 275 mm Max. grinding length: 1050 mm Transversal slide: Work piece spindle head: speeds: from: 30 rpm up to: 675 rpm rotatable: 90 ° taper in spindle: MT: 5 Tailstock: Hydraulic return Taper in tailstock:: 3 MT Voltage 50 Hz 3x: 400 Volt Workpiece spindle motor: 7.5 kW Machine´s weight about: 5100 kg Overall dimensions machine: Length: 3750 mm Width: 1200 mm Height: 2 ...

Complete PET line Blower KRONES Kombi 8 Cavities Pressure filler 60 valves KRONES Labeling machine KRONES Hot glue paper labels Handle applicator COMAG Palletization ACMI Pallet wrapper PIERI The system is set up in 5 formats The plant is still in operation until the end of 2019 Capacity of the system 12,000 B/H at 1.5 lt bottles Built 2003-2009

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 16-MB Technical data Number of axis total: 6 Grinding-wheel diameter: max 125 mm Axial motion: Crosswise: 200 mm Longitudinal: 190 mm Vertical: 150 mm Smallest travel: 0.0001 mm Rotary and swivel axes: Smallest travel: 0.0001 ° U axis Workpiece holder head: 360 ° V-axis Swivel movement of the workpiece spindle: 184 ° W axis Inclination of the grinding spindle carrier: -20 / +15 ° Turret slide: Number of positions: 4 Workpiece chuck speeds: 0 - 1500 rpm Grinding spindle speeds: stepless from: 0 rpm up to: 13000 rpm Hydraulic system: 10 / 40 bar Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 3.7 kW Total power required: 10 kVA Machine´s weight about: 3500 kg Overall dimensions machine: Length: 2200 mm Width: 1810 mm Height: 2600 mm Various accessories: 3D m ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 100 mm Distance between centres: 400 mm Grinding wheel: Diameter: 300 mm Width: 50 mm Bore: 127.0 mm grinding wheel width: 60 mm Grinding wheel speeds: number (steps): 3 from: 1500 rpm up to: 1900 rpm Work piece spindle head: speeds: stepless from: 65 rpm up to: 500 rpm rotatable: 360 ° Spindle hole: 23 mm Spindle taper:: 4 MT Taper in tailstock:: 3 MT Table angular displacement: 9 ° Table speed: stepless up to: 5.0 m/min Voltage 50 Hz 3x: 380 Volt External Grinding wheel motor: 2.5 HP Workhead spindle motor: 0.5 HP Total power required: 4.0 HP Machine´s weight about: 2100 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 1550 mm Various accessories: 3-jaw chuck diameter: 135 mm Macnetic chuck diameter: 150 mm Coolant system Paper filte ...

Register punch ingestion in RG; Knife 90'new ground; Length of format min. 80 mm, max. 340 mm; format width min. 125 mm, max. 350 mm; max. insert height at the table 40 mm; max. cutting height per punch depending on paper quality approx. 8 mm; tee finger for cutting the layers after the cutting process; Machine is serviced and tested by the Infusion Customer Service; other tools on request. Register punch infusion RG; knife 90'new sharpened; min.lenght 80mm, max.340mm; width min.125mm, max.350mm; hight max.40mm; max.cut hight8mm; checked by the support of Tränklein germany; other tools on request.

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: NUM Technical data Spindle hole: 43 mm Carriage 1: Longitudinal travel (Z-axis): 240 mm Transversal strocke (X axis): 150 mm Transversal travel (y-axis): 100 mm Carriage 2: Longitudinal travel (X-axis): 340 mm Cross travel (z-axis): 340 mm Y axis: 100 mm Turret slide: Number of positions: 16 Number of positions turret back side: 8 Driven tools turret 1: 16 Back spindle: Voltage 50 Hz 3x: 400 Volt Total power required: 17 kW Various accessories: High pression colant device Paper filter facility Oil mist extractor Bar feeder: LNS Interface serial port RS 232 Chip conveyor Toolholders Set of toolholders Driven tool holder radial (nbr.): 5 Driven tool holder axial (nbr.): 9 Tool holder fix (nbr.): 6 Tool holder (number): 6

1 JAMES HEAL Elmatear tear tester for accurately testing textiles, nonwovens, and a wide variety of similar materials, including paper, board, and plastic

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 64731 Technical data 5-sided machining Number of axis simultaneous: 5 Table length: 320 mm Table width: 320 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 450 mm Length Table load max.: 75 kg Table divisions (B): -115 / +30 ° Table divisions (C): 360 ° Pallets:: 3R GPS Pallets chanching device: Automatic pallet change-unit (number of paletts) number: 6 Length: 320 mm Width: 320 mm Transport weight: 200 kg Tool changer: Addet tool-holder magazine Number of tools: 170 Spindle nose:: HSK-A 63 Spindle speeds: stepless up to: 20000 rpm Feeds: Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 7700 kg Overall dimensions machine: Leng ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: SPS SIEMENS SIMATIC HMI TOUCH Operating hours: 0 Technical data Centre height: 100 mm Distance between centres: 400 mm Grinding wheel: Diameter: 300 mm Width: 30 mm Bore: 127 mm Workpiece weight on centres max.: 20 kg Grinding wheel speeds: number (steps): 3 up to: 2450 rpm Hydraulic cross travel: 170 mm Angular displacement: 30 ° Work piece spindle head: speeds: stepless from: 60 rpm up to: 1200 rpm Spindle hole: 20 mm Spindle taper:: 4 MT Taper in tailstock:: 2 MT Spindle stroke: 20 mm Spindle diameter: 32 mm Table angular displacement: 30 ° Feeds: Z axis (longitudinal travel): 100 - 3500 mm/min X axis (transversal): 0.01-9 mm/min External Grinding wheel motor: 4.5 HP External Grinding wheel motor: 3 kW Internal Grinding wheel motor: 1.1 kW Machine´s weight about: 1600 kg Overal ...

KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.

Make: Krones Type: TOPMATIC Built: 1996 Capacity: 55000 bottles/h Bottle size:: diameter adjustable, height 198 mm Bottle type: 0.5l glass bottle Labelling: 3 aggregates, abdomen, neck, back Machine division: 125 Number of bottle plates: 45 Used manual grease lubrication Paper label with wet glue Label control Centro Automatic performance adjustment

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 16-GC Operating hours: 30291 Technical data Centre height: 100 mm Distance between centres: 400 mm Grinding wheel: Diameter: 300 mm Width: 32 mm Bore: 127 mm max. grinding wheel width: 50 mm Grinding wheel speeds: number (steps): 3 from: 1600 rpm up to: 2200 rpm Peripheral speed: 35 m/s Rotatable grinding spindle head (b-axis): 30 ° Longitudinal slide: Max. travel: 420 mm Max. grinding length: 400 mm Resolution of the scale: 0.0001 mm Feed range: 0.001 - 10000 mm/min Transversal slide: Max. travel: 150 mm Resolution of the scale: 0.001 mm Feed range: 0.001 - 10000 mm/min Work piece spindle head: speeds: stepless from: 30 rpm up to: 10000 rpm Max. table angular displacement: 15 ° Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 3 kW Workpiece spindle motor: 1.1 ...

Butter Forming & Wrapping Machine Manufacturer: Trepko Type: XPG40 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series Oi Mate TD Technical data Min. grinding diameter: 20 mm Max. grinding diameter: 300 mm Max. grinding depth: 300 mm Max.workpiece length + steady: 1200 mm Centre height: 300 / 430 mm Axial motion: Longitudinal travel (Z-axis): 650 mm Cross travel (x-axis): 150 mm Spindle head (u axis): 500 mm Work piece spindle head (B-axis): +/- 20 ° Max. axial speeds: Z axis (longitudinal travel): 12000 mm/min Grinding spindle head: Grinding spindle motor: 6.5 / 7.8 kW Machine´s weight about: 9500 kg Overall dimensions machine: Length: 5000 mm Width: 2300 mm Height: 2400 mm Various accessories: Wheel trueing attachment Coolant system Paper band filter Steady

Creasing and cutting in one operation For paper from 130 - 240 g Max width 320 mm

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 150 mm Distance between centres: 680 mm Max. Longitudinal travel: 620 mm Grinding wheel: Diameter: 350 mm Bore: 127.0 mm grinding wheel width: 50 mm Grinding wheel speeds: number (steps): 3 from: 1640 rpm up to: 2300 rpm Work piece spindle head: speeds: stepless from: 65 rpm up to: 500 rpm rotatable: 360 ° Spindle taper:: 5 MT Taper in tailstock:: 3 MT Table angular displacement: 8 ° Table speed: stepless up to: 5.0 m/min Voltage 50 Hz 3x: 380 Volt External Grinding wheel motor: 4.0 HP Total power required: 6.8 HP Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2700 mm Width: 1800 mm Height: 1900 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: Tschudin Checkomatic Paper filter facility Sparking-out attachment La ...

Modular built semi-automatic twist wrapping machine Product dimensions: Width: 50 - 730 mm Height: 20 - 520 mm Length: 750 mm to infinity Maximum diagonal: 730 mm Packing materials: PE stretch film, VCI stretch film PE film, crepe paper, etc. Width: up to 250 mm Core average: 76 mm Very good condition!

Waste Baler BTS-MF100 The BTS-MF100 Waste Baler is ideal for compacting loose cardboard, paper and film. By compacting these recyclable materials user receives a high volume reduction up to 90% and also waste disposal cost savings. The baler impresses with its ease of use and large filling volume. The finished bales can be easily removed from the baler with the automatic bale ejector. - Solid bales with bale weight up to 100 kg - Suitable for baling of cardboard, film, clothes and many materials more - Powerful cylinder for optimal material compaction - Retaining Claws to reduce material spring back - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 6 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 2371 x 1388 x 1046 mm Transportation ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 100 mm Distance between centres: 680 mm Max. Longitudinal travel: 620 mm Grinding wheel: Diameter: 350 mm Bore: 127.0 mm grinding wheel width: 50 mm Grinding wheel speeds: number (steps): 3 from: 1640 rpm up to: 2300 rpm Work piece spindle head: speeds: stepless from: 65 rpm up to: 500 rpm rotatable: 360 ° Spindle taper:: 5 MT Taper in tailstock:: 3 MT Table angular displacement: 8 ° Table speed: stepless up to: 5.0 m/min Voltage 50 Hz 3x: 380 Volt External Grinding wheel motor: 4.0 HP Total power required: 6.8 HP Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2700 mm Width: 1800 mm Height: 1900 mm Various accessories: Internal grinding attachment swivellable: Spindle speeds: 50 rpm Coolant system Paper filter facility Sparking-out att ...

Waste Baler BTS-MF500LH The BTS-MF300LH and BTS-MF500LH Low Height Waste Balers are ideal for compacting loose cardboard, paper, film, plastic and metal containers and many materials more. The waste balers impressing with their low height, ease of use and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Bale weight output of up to 500 kg - Compact and low design with only 2249 mm height - Suitable for baling of cardboard, film, clothes, cans, PET, Canister, Big Bags and many materials more - Automatic bale cycle - Retaining claws to prevent spring back - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force:50 Ton Motor: 11 kW 32 Amp Power suppl: 380-400 V (3 Phase) Machine size (H x W x D): 2249 x 2041 x 1350 mm Tr ...