We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,107 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Scara robot Epson G10-851C Control: EPSON RC180 Number of axes: 4 Load capacity: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm
used
Scara Staubli TS60 robot Year of construction: 2011 Number of axes: 4 Load capacity: 2.0 kg Reach: 600 mm
used
Cell with an industrial robot BJB Motoman YR-HP20-A00 6 axes maximum load: 20 kg Reach: 1717 mm Year of construction: 2008
used
Cell with TIG-OTC-NH52-NEFC welding robot Country of origin of the cell: Italy Year of production of the cell: 2017 Country of origin of the robot: Japan Brand: OTC NH5 Year of manufacture: 2016 Number of axes: 6 Reach: 866 mm Load capacity: 5 kg Control: OTC FD 11 Source: OTC DA 300-P Cell dimensions: Length 3500 mm 1900 Width mm Height 2400 mm
used
Robot cable ABB 3HAC034295.0 Manip ax1-6/MH ax1-3 cable REV.02 New ! Dimensions (packaging): 800 x 600 x 300 mm
used
Robot gearboxes, cycloidal gearboxes, robot accessories PAGUS 0590364 diameter: Ø 222 mm bolt circle (inside): 130 mm bolt circle (outside): 208 mm shaft: Ø 50 mm, length 95 mm timing belt wheel: Ø 125 mm, width: 32 mm used, tested ! Dimensions: 222 x 222 x 265 mm
LINEAR AXLE:. - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:10000 mm
LINEAR AXLE:. - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:5000 mm
LINEAR AXLE:. - Number of moving slides:3 DIMENSIONS / WEIGHTS:. - space requirements length:16000 mm
LINEAR AXLE:. - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:12000 mm
LINEAR AXLE:. - Number of moving slides:3 DIMENSIONS / WEIGHTS:. - space requirements length:19000 mm
LINEAR AXLE:. - Number of moving slides:2 DIMENSIONS / WEIGHTS:. - space requirements length:7000 mm
LINEAR AXLE:. - Movement:3500 mm - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:5000 mm
LINEAR AXLE:. - Movement:2500 mm - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:4000 mm
PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm
PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm - total weight approx.:905 kg
PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm
PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm
PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1000 mm
used
Robot gearboxes, cycloidal gearboxes, robot accessories VIGODRIVE A97-0218-0305/37 RV-27C-36.57 P21L009-00 bolt circle (inside): 116 mm bolt circle (outside): 152 mm used, tested ! Dimensions: 182 x 182 x 75 mm
used
--- Young Used TIG and MIG-MAG systems (demonstration systems, etc.) with only a few welding hours in very good condition. To be delivered directly from the manufacturer at attractive conditions --- LORCH COBOT WELDING PACKAGE: Cobot UR 10 + S5-RoboMIG XT - Collaborative MIG-MAG welding - Welding machine: S5 RoboMIG XT Cobot - Incl. FullProcess: All Lorch SpeedProcesses included SAY GOODBYE TO SKILLS SHORTAGES, COST PRESSURES AND TECHNOLOGICAL GAPS With Lorch Cobot Welding Solutions, you can relieve your employees and increase productivity and profitability by optimizing the use of your human resources. Reduce waste, rework, and costs with consistent performance and reproducible results of the highest quality. Stay future-proof and position yourself as an attractive employer for young, tech-savvy talents with this practical step towards Industry 4.0. REPRODUCIBLE PERFECT ...
used
KUKA KR16 L6 ARC-C robotic welding machine together with the PO-2t6m-01 rotary positioner was commissioned in 2017 and its purpose was to very precisely weld gates and fence spans, but it can also weld various types of structures that fit within the range of the rotary positioner. The welding station includes a robotic arm built in 2009, which was previously only used for testing. The whole thing has only worked for 50 hours. The KUKA KR 16 L6 ARC-C robotic welding system is equipped with: – welding robot: KUKA KR16 L6 ARC-C – controller: KUKA KR C2 – rotary manipulator: PO-2t6m-01 – current power source: FRONIUS TransPuls Synergic 4000 CMT R – software: KUKA System Software (KKS) – torch cleaning device: TBi BRG-2-ES-DAE – wire feeder: FRONIUS ROBACTA DRIVE CMT – track The rail-moving KUKA KR16 ARC industrial robot with a reach of 6 m allows excellent preci ...
used
FANUC Arc Mate 100iC robotic welding machine manufactured in 2014, is designed for welding workpieces with even the most complex shapes. The FANUC robotic welding system is equipped with: – robotic arm: FANUC Arc Mate 100iC (2 units) – 3-axis manipulator: PEHh-3-450 – controller: FANUC SYSTEM R-30iB – welding source: LINCOLN ELECTRIC Power Wave S350 (2 units) – light curtains – liquid-cooled welding torch: ABICOR BINZEL ABIROB W500 (2 pcs.) – torch cleaning device: ABICOR BINZEL BRS-CC – wire feeder: LINCOLN ELECTRIC 4R100 (2 pcs.) – wire reel cassette with clamping system (2 pcs.) – operator’s panel – water cooler: LINCOLN ELECTRIC COOLARC-50 (2 pcs.) – control cabinet – attaching fixtures (2 pcs.) – strain relief hanger and cable relief (2 pcs.) – covers with service door and lock with safety switch – platform (2 pcs.) In order to ...
used
Robots - Sepro Success 11 Year of construction: 2019 Location: Lodz, Poland 5-axis robots: 3 axes are driven by servo motors (electric); Axis B (revolution) and movement A Touch control panel The safety package for robots Robot with adapter All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request
used
Sprue Picker - Geiger Handling Mini Servo 1,5 Year of construction: 2011 Location: Lodz, Poland X-axis servo-driven (electric), C-axis (rotation) All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request
used
Handling weight max. 400 kg, reach 9,000 mm, travel speed 3 m/sec., power 45 kW, weight 1,600 kg, drive fully hydraulic, was used for wall prefabrication, other plant components available, please contact us if you are interested.
used
Robot cell for leak testing consisting of: Robot FANUC LR Mate 200iC/5L – 2008, Table for measurements, equipped with 8 light curtains, 2 Innomatec devices for leak testing, type LTC – 502. The cell has a safety system and CE
used
Robotic industrial cell with BLM Dynamo-E tube bending machine Industrial cell consisting of: automatic bar feeder BLM CRMA7, Industrial robot Fanuc M16IB20, Tube bending machine BLM Dynamo-E year of manufacture 2007, machine number 200016, 2 handle conveyors, with photoelectric control, Resistance welding machine, Constructione Italy, PPN83, machine number QM328001, 2 resistance welders, Constructione Italy PPN83, Donation tape. The whole is fenced with networks controlled by Siemens with CE certification Link to the video – https://youtu.be/y5yYJQhkrRw
used
Repair and Exchange service Reparatur und Austausch Service YAMAZAKI MAZAK GANTRY CONTROL UNIT MAIN BOARD A 7780001001 A-4 Through our Mazak machine simulators, we are able to use almost ALL Mazak Mitsubishi GANTRY CONTOL UNITS under load to test. Long-term tests are also possible. We repair your GANTRY CONTOL UNIT at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
used
Repair Service Reparatur Service Part: Robot Controller Main Board Type: A7780001001 other types on request For MAZAK and MITSUBISHI If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
used
Repair and Exchange service Reparatur und Austausch Service YAMAZAKI MAZAK GANTRY CONTROL UNIT MAIN BOARD A 7780001001 A-2 Through our Mazak machine simulators, we are able to use almost ALL Mazak Mitsubishi GANTRY CONTOL UNITS under load to test. Long-term tests are also possible. We repair your GANTRY CONTOL UNIT at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
used
KAWASAKI 3CP180L-AC03 palletizing robot manufactured in 2018, increases the productivity of production lines in many industries by automating the process of palletising products. This extremely reliable KAWASAKI CP180L packaging robot is distinguished by its short cycle times, wide movement range and 4 dynamic axes with high axial speeds necessary to quickly move goods with a total weight of 180 kg. Outside the working area of the machine there is a convenient and easy-to-use controller, whose high funcionality allows the robot to be used comprehensively in the production process. The KAWASAKI industrial robot weighs 1600 kg. Technical specifications of the KAWASAKI 3CP180L-AC03 robot - number of axes: 4 - arm reach: 3255 mm - maximum payload: 180 kg - palletising capacity: approx. 1800 cycles/hour - axis movement range JT1 axis: ± 160° JT2 axis: +95° / -46° JT3 axis: +15 ...
used
KAWASAKI 3RS050N-BC02 palletizing robot built in 2018, is designed to increase the productivity of production lines in many industries by automating the process of palletising products. This 6-axis packaging robot features a compact design with a sturdy arm and a long reach, guaranteeing fast handling of goods weighing a maximum of 50 kg. The total weight of the machine is 555 kg. Technical specifications of the KAWASAKI 3RS050N-BC02 industrial robot - number of axes: 6 - arm reach: 2100 mm - maximum payload: 50 kg - axis movement range JT1 axis: ± 180° JT2 axis: + 140° / -105° JT3 axis: + 135° / -155° JT4 axis: ± 360° JT5 axis: ± 145° JT6 axis: ± 360° - axis motion speed JT1 axis: 180°/s JT2 axis: 180°/s JT3 axis: 185°/s JT4 axis: 260°/s JT5 axis: 260°/s JT6 axis: 360°/s - repeatability: ± 0.06 mm - mounting: floor, ceiling - power requirement: ...
used
COMAU SMART 5 PAL 180-3.1 palletizing robot manufactured in 2016 has been specially configured for the demanding process of automated product palletisation. The robot’s compact design and excellent performance allow to significantly increase the productivity of production lines in industries where speed and precision are required. Thanks to the use of innovative carbon-fibre components, the 4-axis packaging robot is distinguished by the best optimisation and short work cycles. The COMAU PAL-180-3.1 industrial robot weighs 1250 kg. Technical data of the COMAU SMART 5 PAL 180-3.1 robot - number of axes: 4 - payload: 180 kg - additional forearm capacity: 25 kg - arm reach: 3100 mm axis movement range axis 1: ± 180° axis 2: -49° / +95° axis 3: -68° / -208° axis 6: ± 2700° - axis motion speed axis 1: 120°/s axis 2: 100°/s axis 3: 110°/s axis 6: 280°/s - repeata ...
used
COMAU SMART 5 PAL 260-3.1 palletizing robot built in 2016, has been specifically designed and configured to increase the productivity of production lines in industries where speed and high precision are required. The use of the machine in the factory allows to fully automate the process of palletising products while maintaining high productivity, optimisation of the process and short cycle times. The packaging robot has a robust arm with 4 dynamic axes with a long reach, allowing it to handle goods with a maximum weight of 260 kg. The COMAU PAL-260-3.1 industrial robot weighs 1250 kg. Technical specifications of the COMAU SMART 5 PAL 260-3.1 robot - number of axes: 4 - arm reach: 3100 mm - maximum payload: 260 kg - additional forearm capacity: 50 kg - axis movement range axis 1: ± 180° axis 2: -49° / +95° axis 3: -68° / -208° axis 6: ± 2700° - axis motion speed axis ...
used
Year of manufacture 2016 With over 40 years of experience, Polymac supplies extraction systems, in-mould labelling systems, handle machines and downstream automation for your pail and lid production. Extraction robot for large pails 10 - 20 litres
DIMENSIONS / WEIGHTS:. - total height:1000 mm
used
2 KR C2 robot arms with KCP2 controller. Of these, one system is complete and operational and will be in use until October 2023. There is a factory warranty for the control system with a remaining term of 20 months The other serves as a spare parts donor. The system is replaced by the successor and is fully functional.
used
Ref. -No.: 10196 Manufacturer: HYUNDAI Year of construction: 2008 Storage location: Halberstadt Country of origin: Südkorea serial number: HB5-0156-440
Country of production: Sweden Year of production: 2002 Reach: 800 mm Control: M2000 Load capacity: 6 kg
used
Sprue picker - Wittmann WP80 Year of construction: 2016 Location: Lodz, Poland Travels in axes: X-100, Y-550, Z-90° Weight: 52 kg All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request
used
Robots - Wittmann W811 Year of construction: 2010 Location: Lodz, Poland 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter and protective housing All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request
used
Robots - Wittmann W721 Year of construction: 2006 Location: Lodz, Poland 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter and protective housing All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request
used
Robots - Wittmann W811 Year of construction: 2010 Location: Lodz, Poland 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter and protective housing All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request
used
Robot accessories, Mechanical Stop Axis 3 ABB 3HAC13128-1 COMPLETE MEKSTOPPSET New ! Dimensions (packaging): 290 x 250 x 120 mm
used
Inv. Num. : 7048 Type:- Producer: CLOOS Created: GO 2019 Parameters: Maximum load capacity: 500 kg Clamping length between flanges: 1500 mm
used
• Output approx. 40 cycles/min. • 2 filling hoppers, manual product feeding • 2 vibrating pots • Robot Mitsubishi RH-3SDHR, max. load 3 kg • Vacuum gripper • Product transfer, e.g. into blister cavities of a blister machine, by inserting the product transfer area of a blister machine into the machine. • HMI programme control with touch screen • Drive 220V/50Hz
used
Robots - Wittmann W818 / High-speed robot Year of construction: 2012 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request
used
Robot - Geiger Mini CNC / High-Speed Robot Year of construction: 2019 4-axis robots: 3 axes are driven by servo motors (electrically) Touch control panel Robot with adapter All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request
used
Robot - Angel Viper 20 Year of construction: 2015 5-axis robots: axes X, Y, Z, A, B are driven by servo motors (electrically) Touch control panel The safety package for robots Robot with adapter All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request