palet line used for sale

Used pastry machine RONDO, Type: Polyline - Winding unit - Calibration unit - Cutting drums -Guillotine - Bottler available Further information on request. Visits and test runs are possible by arrangement.

Sheathing line Roll forming line for laminate Stacking of the panels Sawing the panels Milling the panels Transport Gluing of the decorative foil Transport More items new and used - you can find them in our shop! International shipping costs on request!

Packaging line V2000 for laminate Infeed with quality assurance control station and product collection Erecting Station Cardboard Backing Transport Adhesive application Station Overlap Labelling Inlet Shrink Tunnel Collection Packages Palletizing Strapping Spout More items new and used - you can find them in our shop! International shipping costs on request!

Linear bearing, linear rail, linear guide, roller guide rail, without guide carriage, guide rail -Guide rail with: 2 pieces of slide -Length: 1600 mm -Dimensions: in the pictures -Price: per piece -Number: 2 pieces -Dimensions: 1600/100/H48 mm -Weight: 13.2 kg

A line for longitudinal cutting of sheets in coils Technical parameters of the longitudinal cutting line: - cutting thickness up to 1.5 mm - cutting width from 25-1300 mm - max coil weight 6 t - cutting speed 0-25 m/min - cutting capacity for 1200 mm x 1 mm approx. 10-12 tons / hour. - installed power 10 kW

Description: control: SIEMENS Simatic HMI Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Make: Alcos Material: CRS, HRPO, EG, GL, Pre-Paint Max Shear Strength: 50,000 PSI Max Yield Strength: 65,000 PSI Material Width: 12″ – 72″ Material Thickness: .015″ – .135″ Weight: 60,000Lbs Coil OD: 12″ – 72″ Coil ID: 20″ – 24″ Stacker Weight: 20,000Lb Max Line Speed: 250 feet per minute Direction: L–R 4-Arm Entry Tursntile Model: ST4-60K-72 Entry L-Type Coil Car Model: FCC-60K-72 Mandrel Uncoiler 4-Leaf Pumpkin Tooth Mandrel Powered Expansion Water Cooled Brake Hydraulic Feed Up Drive Sliding Base Powered Out-Board Support Hydraulic Peeling Table Driven Entry Pinch Rolls Hydraulic Entry Crop Shear Adjustable Edge Guides Scrap Receiving System Alcos 5-Hi Precision Leveler Model: 175-5H-72 Entry & Exit Driven Pinch Rolls Work Rolls Diameter: 1.75″ Number of Work Rolls: 19 Nine (9) Back Up Flights 150HP DC Motor Drive ...

Complete chipping plant EWD, capacity 30-40 m3 of logs per hour. The plant was dismantled in Germany. Located in Moscow. Technical data and price on request.

FORMAT: 1 DF-20 DF, 26 MIL. NF PER ANNUM, FORMING, MOULD TRANSPORT, DRIER TRANSPORT, DRIER, SETTING DEVICE, KILN ETC.

1987, CAP.: 75,000 T/ANNUM, STRIP WIDTH: 250 - 1300 MM, THICKNESS: 0.2 - 2.0 MM, COIL WEIGHT: 10 T, SHEET LENGTH: MAX. 4.0 M, 2-ND LINE: CAP.: 30,000 T/ANNUM, STRIP WIDTH: 700-1300 MM, THICKNESS: 0.3-3.0 MM; COIL WEIGHT: 10 T, SHEET LENGTH: 4.0 M, SPEED: 20 M/MIN.,

Complete line for production of twist off metal caps with machines SACMI, Italy. Different sizes and options.

Built in 2004 Capacity single straps up to 40 straps/min Size packaged good width max 580 mm min 180 mm Size packaged good height max 400 mm min 10 mm Equipment cross strapping machine 2003 HS inline strapping machine 2003 I ; working condition

Very nice good working sawmilling for sale Very nice well maintained sawmill line for sale Consisting of: Log task 4 strands, Isolation, regular users and depositors, Fully hydraulic tensioner Mayerhofer, Sash gang saw EWD GDZ GE 71 (passage 71 cm) Riving knife, Cuttingsaw for boards (automatic) Roller conveyor with pullers, cross conveyor for trimming, Edger PAUL KME II - Spliter unit,, Roller conveyor, Kick-off conveyor . grinders Very well-kept LINE! READY TO WORK

Used bread bun line KEMPER, Type: Quadro -in bakery condition- - head machine with 5 rows, Type: QUADRO - dough feed in with flour duster - SIEMENS controll - moisture unit - 2x seeding station with seed refeeder (1x without press barrel) - cutting device - automatically sheet setting device, Type: AB-2 ILL - incl. 2 knife barrels for rye and wheat dough - variable speed - year of manufact: 11 / 2000 - direction left - controll chamber Technicall data: Number of rows: 5 pcs Dough weight range: 40 - 150 g Capacity: approx. 8.000 pcs./h Working width: 600 mm Length: approx. 6.895 mm Total weight: approx. 2.000 kg The line was in operation since to the November 2018. An inspection is possible at every time.

A) Total grinding units: 02 - longitudinal - bottom Grinding units total: 02 - transverse - top - bottom B) Total grinding units: 02 oscillating - right C) Total grinding units: 02 oscillating - links D) Orbital grinding unit total: 02 Complete loading

Complete Soudronic line for tin cans 50,2 mm. Include line for lids KRUPP. Speed - 500 cpm.

Used sugar agglomeration line made by Olhmann. New 1996. Capacity ca. 600 kg of agglomerated sugar per shift. One batch = 100 kg and lasts 40 minutes. Short operating principle: ground sugar is thrown inside the agglomerator, at the bottom there is a sieve through which hot air from the steam exchanger throws the product upwards, which with the sprayed water causes the formation of very fine balls. The line requires process steam, an input of 8 bar.

BLISTER MACHINE FOR AMPOULES FARCON FC320 WITH VISION SYSTEM SEA VISION For thermoforming trays for ampoules, vials. Manufacturer: Farcon (MARCHESINI GROUP) Model: FC320 Year: 2002 Automomatic ampoules feeder on trays Pick and place system to pick up trays and place them on a conveyor Two-way conveyor Maximum forming depth: 42 mm Speed: 45 cycles/min Maximum forming area: Film width 254 mm; Film pitch 220 mm Maximum cutting area: Film width 248 mm; Film pitch 210 mm Maximum production: 63000 ampoules (1 ml)/h Hydraulic network: - Pressure : 1.5 to 2 bars - Connection : Ø 1/2" Gas - Temperature : 11°C to 15°C - Average consumption : 200 l/h Pneumatic network: - Pressure: 6 to 8 bar - Connection: Ø 3/4" - Consumption: 500 Nl/min Power supply: 400V 3-phase, 50Hz, 3A Power: 6kVA CARTONER CAM MODEL HV2 FOR AMPOULES Model: HV2 ...

Electrostatic painting line Wagner with conveyor Technical specifications: Pumps for providing of material Leopard 35-150,pcs -2 Washing pump Leopard 35-70 Painting manipulators + guns, pcs - 2+4 Capacity, Kwt - 5,5 Max. material pressure at the pump inlet, MPa-Bar-Pound / m² - 2-20-290 The pH value for the material, pH - 3.5 ÷ 9 Material temperature range, ˚С - +5 ÷ +80 "Ambient temperature range, ˚С - +5 ÷ +60 " Permissible angle of inclination at work, ˚arcs - ± 10

Used line for production of curd and short cheese by OBRAM Olsztyn. YOM 2002 Line consists of: - Column moulding device - unit 1 - Curd presses (set) - unit 1 - Multiform turners - unit 2 - Multiform evacuator - unit 1 - Multiform washer - unit 1 - Multiform storeroom - unit 1 - Whey tank - unit 1 Product characteristics: - Curd characteristics: Dimensions: diameter 10.5 cm height adjustable - standard 3.5 cm Weight: adjustable - standard 0.4 kg - Traditional curd: round shape with diameter 102±2mm height 45±2mm weight per piece 380±10g - Ripened cheese: round shape with diameter 102±2mm height 45±2mm weight per piece 380±10g

Cut to length line Bronx CTL 1-5mm 400-1500 15 MT Material: CR, HR, P&O GALVA Thick (mm): 1,0 – 5.0 Width (mm): 400 – 1500 Weight max: 20 MT Coil Int. Diam.: 508/610/700 Coil Ext. Diam max (mm): 2000 Length Produced (mm): 500 – 4000

12″ x .125″ x 4000Lb Bliss Slitting Line Make: Bliss Material Width: .075” – 12” Material Thickness: .008” – .125” Weight Capacity: 4,000Lb Coil ID: 16” – 20” Coil OD: 72”

18″ x .070″ x 6,000Lb Morvay Slitting Line Material Width: 18″, Weight Capacity: 6,000Lb, Material Thickness: .008″-.070″, Coil ID: 20″, Direction: Left to Right. Mandrel Uncoiler with Disc Brake, Powered Mandrel Expansion, Powered Hold-Down Roll, Driven Entry Pinch Rolls, Slitting Head with Adjustable Arbors, Knives & Tooling, Recoiler with Hydraulic Push-Off, Powered Over-Arm Separator, 50HP Motor, Exit 2-Arm Turnstile

Bottling Line | KRONES • Year: 2003 – 2018 • Speed: 14.000 BPH • Direction: Clockwise • Blower KRONES C310 o 10 cavities o Preforms tilter and hopper o Stamp: 0.50L – 0.90L – 1L – 1.5L – 1.5L – 2L • Isobaric filling monoblock BC 70.70.10 • Rinser 70 clamps • Filler 70 valves • Capper 10 heads – Cap Alaska (3P) and BPF 28mm • Labeller KRONES 18 heads – Roll fed • Air conveyors ZECCHETTI • Ozonator • Caps elevator • Saturator • CIP system • Dryer bottles • Bottle inspector (label - cap - level) • Laser marker • Accumulation table • SYMPAK shrinkwrapper • Devider (da 1 o 2 file) • Palletizer SYMPAK • Pallet wrapper • Compressor BOGE low pressure • Booster SIAD

60″ x .135″ x 40,000Lbs Yoder Slitting Line Material Width: 12″ – 60″ Material Thickness: .010″ – .135″ Weight Capacity: 40,000Lbs Coil ID: 20″-24″ Coil OD: 72″ Pull Through Design Entry Coil Car Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Slitting Head with Gear Box and AC Feed-Up Motor Single Scrap Winder Recoiler with Over-Arm Separator DC Motor Drive Exit Turnstile Electrics, Hydraulics, Controls

Bottling line isobaric PET/glass • Year: 2000 - 2013 • Speed: o PET: 6.000 bph o Glass: 8.000 bph • Blower SIAPI - 2000 • Preform tilter – 2012 • ZECCHETTI air conveyors – 2000 • Depalletizer SYMPAK - 2003 • Filling monoblock BC 42.50.10 – 2000 • Ozonator – 2000 • Caps elevator – 2000 • Deareator and Saturator BC– 2000 • Labeller KOSME cold glue and hot melt for glass – 2000 • Labeller P.E. hot melt for PET - 2003 • Bottle inspector (cap level label) – 2000 • Inkjet VIDEOJET – 2013 • Devider (1 to 2 rows) – 2003 • Shrink wrapper DIMAC – 2000 • Handler TWINPACK – 2000 • Wraparound DIMAC – 2003 • Box conveyors - 2003 • Palletizer KEBER – 2000 • Pallet wrapper – 2000

60″ x .625″ x 100,000Lb McKay Slitting Line Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

72″ x .187″ x 50000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Cut to length line Redman 2000mm x 13mm x 20 ton Make: Redman (UK) Material Width: 600mm – 2000mm Material Thickness: 6mm – 13mm Coil Weight: 20 ton Coil ID: 460mm – 760mm Coil OD: 1800mm Max Speed: 20 meters per minute Production Mode: Stop / Start Direction: R-L Entry V-Type Coil Car Double Mandrel Uncoiler Hold-Down Roll Hydraulic Peeling Table Driven Pinch Rolls Pinch Rolls Diameter: 330mm Corrective 4-Hi Leveler Nine (9) Working Rolls Work Rolls Diameter: 140mm Hydraulic Work Rolls Adjustment Up and Down Back Up Flights 120HP DC Motor Drive Mechanical Shear with Motor Belt Conveyor with Measuring Head Drop Type Stacker with End Conveyors Electrics, Hydraulics, Controls

Cut to length line LDM Spotti 1500x6x25t (two levelers, flying shear) LDM CUT TO LENGTH LINE 1500X6 YEAR OF CONSTRUCTION 2000 TYPE 1500X6 THICKNESS 0.5 mm – 6.0 mm WIDTH 390 mm – 1500 mm SPEED 30 m/min UNCOILER CAPACITY 25 ton SHEET’S LENGTH 490 mm – 8400 mm DIMENSIONS 44 m X 9 m (LXW) UNCOILER: 1. DOUBLE CONE WITH EXPATION 2. I.D. = • Φ508 & Φ610 & Φ760 • Φ680 & Φ700 & Φ780 WITH O RINGS 3. O.D.= • MAX = 2000 mm • MIN = 1100 mm COIL CAR: MAX LIFTING CAPACITY = 25 Mton COIL OPENER & PRE-LEVELER: 1. 2.00 mm – 6.0 mm 2. MAX WIDTH = 1500 mm 3. 5+1 LEVELING ROLLERS Φ130 4. 52 KW DC MOTOR 1 ST LEVELER: 7. 0.50 mm – 2.5 mm 8. 390 mm – 1500 mm 9. 280 N/mm2 – 480 N/mm2 10. 19 ROLLS Φ43 mm 11. 7 + 7 BACK UP ROLLS 12.44.3 KW DC MOTOR FLYING SHEAR: 1. 0.50 mm – 6.0 mm 2. 1500 mm CONVEYOR BELT: 1. LENGTH 6000 mm 2. WIDTH 1600 MM STA ...

round bread bread baking line, description: round loaf bread baking line; consisting of 1 stainless steel dosing machine brand Shadowtotal dimensions . approx. 1800x1100x1500mm; equipped with hopper and cutting machine; 400V; 1 conveyor belt, 5-storey; tire width approx. 350mm; total dimensions . approx. 6500x600x700mm; equipped with CPG induction motor; 1 stainless steel 2-piece flattener; 1 stainless steel 13-storey walkthrough proofer; tire width approx. 600mm; total length approx. 7500mm;

Description EXTRUSION TAPE LINE - Screw Diameter 120 mm - L/D 25 - BD Plast Screen Changer - Motor Power 130 KW - Calender 1200 mm - Slow Stretching Line 1000 mm - Fast Extension Line 1000 mm - Corona Treatment - Rewinder

Tool adapter for clamping Flange Brand: Atemag Type: Function Line ER25, ER32, Saw Adapter

Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls  ...

Different kind of sheeted and rolled breads. Niittypitko 2000 pcs / h, 2 rows, dough thickness 3-4 mm Coffee bread Kranssi 2000 pcs / h, 2 rows, dough thickness 3-4 mm Muhku, 10 000 pcs / h, 8 rows, dough thickness 6-8 mm Ciabatta, 7200 pcs / h, 6 rows Folded bread, 4800 pcs / h, 4 rows, dough thickness 5 mm Capacity based on 20 strokes per minute for the retracting belt, in combination with the product discharge conveyor system Product specification: Manufacturer: Rademaker Holland Type: Crusto bread line Year: 2008 Voltage: 3 x 400 v + N + Pe, 50 Hz Control voltage: 24 Vdc Power consumption: 21, 9 kW Inom: 41 A, max fuse 50 A Avarage air consumption: 196 nl / min Max air consumption: 548 nl / min Dimension: L 21 000 mm, W 3000 mm, H 6000 mm

2000mm x 8mm x 30ton FIMI CTL Line Cut-to-length line FIMI 2000mm x8mm x 30t can help you handle all your cutting needs with sheet metal up to 8mm thickness, 20000 mm width and 30t maximum coil weight. This line is equipped with two levelers to provide high top straightening quality and flying shear to make cutting process perfect Manufacturer: FIMI – ITALY Year: 1990 Material: CR-GZR-RP-RKK Yield Strength: 180-400 Mpa Tensile Strength: 220-550 Mpa Coil Width: 800-2000mm Coil Thickness: 1-8mm Coil Weight: 30 Ton Line Speed: 1-25m/min Direction: Left to Right Sheet Tolerance/Size: Length Tolerance: +/- 1 mm Diagonal Tolerance: 0.1% x Sheet width Sheet Width: 800 – 2000 mm Sheet Length: 3000 – 12000 mm Electric AC: 380V /50 Hz / 3 phase AC Control Voltage: 110 V Control Voltage: 24 V Double Mandrel Uncoiler Sliding Base Powered Mandrel Expansion Powered ...

Rademaker / Rondo ‘salmon en croute’ line Rademaker block processor with Rondo make up line. Has been producing ‘Salmon en croute’ for major UK supermarkets. Whole line is in lovely condition and can obviously be easily adapted to run other products like pasties, sausage rolls etc. Mainly used seasonally so only 11,800 running hours.

Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) is perfect solution for longitudinal cutting of coil metal into strips. This line can work with very big coils up to 74,000 Lb weight and 0.25 inches maximum metal thickness. Line is strong enough to make cutting speed 200 – 600 fpm depends on metal thickness and width you work with Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) Manufacturer: PRO ECO Material: CRS, HRS, HPP & O Material Width: 12″ – 72″ Material Thickness: .060″ – .250″ Coil Weight: 74,000Lb Coil ID: 20″ – 30″ / 20″ – 24″ Coil OD: 72″ Line Speed: 200 – 600 fpm Direction: L-R Three (3) Coil Storage Ramp Coil Car Powered Lift & Traverse Double Cone Uncoiler Sliding Base Dual Water Cooled Brake Feed-Up Motor Powered  ...

Used line for the production of chocolate "bodies". Year of production 2008. The line includes: - acid-resistant tank with a capacity of 1000 L - 250L double ribbon mixer - CFA 3 body molding machine - TCH-600 pre-cooling tunnel

Korean made trapeze line 3 form sliding cassette system ( 27/200-30/151-18/838 ) cassette change in 5 minutes 3 types of cases are available 27/200 - 38/151 - 18/838 change takes only 5 minutes the cassette roller is all chrome 15 ton hydraulic uncoiler rollformer line flying shear Stacking unit is a fully automatic machine

Servo controlled eccentric press line 40 Ton Press capacity 860 mm max material width

Extruder is missing electronics and it is not in running condition. Barrel 30D The barrel was opened for inspection of the liners and shafts, the hydraulics function correctly. Liner 1. Feed, 2.5D good condition Liner 2. Inter, 5.0D good condition Liner 3. Inter, 5.0D good condition Liner 4. Inter, 5.0D good condition Liner 5. Inter 5.0D good condition Liner 6. Inter 2.5D good condition Liner 7. XLT Discharge 5D good condition. Feed and return lines were removed and compressed air fed into circulation blocks. All blocks were found to have good flow. Pipework is in good condition with all solenoids present. All control thermocouples and melt thermocouples are in place but could not be tested due to condition of electrics. All the heaters are in place but could not be tested due to the condition of electrics. The barrel is in very good overall condition. Shafts Al ...

MURAT - NR 241 - cutting, milling and screwing of reinforcement steel MURAT - KD 658/20 - 4 head welding machine MURAT - CN 770/20 - corner clean machine Capacity Min. 100 windows / 8 hours, Max. 120 windows / 8 hours All these machines make automatic production line for PVC systems. The price includes these three machines above and transporter of the frames between welding and corner cleaning. MURAT - NR 241 - Details: All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. Stacking of 10 profiles (max. 6,5 m length). Manual barcode labeling system integrated with single-lines. Servo controlled automatic swing of the saw to all angles between 30° and 150° with 0.1° accuracy. Drain slot routing, drilling and routing at variable angles. Automatic scr ...

Maker: Muhong Material Width: 500mm - 20000mm Material Thickness: 8mm - 20mm Coil Weight: 35 ton Coil ID: 410mm - 650mm Coil OD: 1800mm Direction: Right to Left Entry Coil Car Hydraulic Lift and Traverse V-Type Floor Standing Design Double Mandrel Uncoiler Powered Hold Down Roll Sliding Base Pneumatic Brake Sliding Base Feed Up Motor Drive Hydraulic Peeler Driven Pinch Rolls 5-Rolls Straightener Adjustable Work Rolls Work Rolls Diameter: 300mm Motor: 132Kw DC Drive Driven Exit Conveyor 9-Rolls Straightener Adjustable Work Rolls Work Rolls Diameter: 230mm Motor: 200Kw DC Drive Driven Exit Conveyor Hydraulic Shear Entry Entry Pinch Rolls Self Contained Hydraulics Exit Driven Conveyor Drop Type Stacking System Electrics, Hydraulics, Controls

Cut-to-length line Bronx 2050x8mm x35t (A3781) Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator  ...

Slitting line Fimi 1500×2.5mm x15t (A3783) Manufacture FIMI ITALY Year 1990 Strip width Min. 200 mm Max. 1500 mm Strip thickness 0.3 – 2.5 mm Coil weight Max. 15 t Coil- Max. 1500 mm Speed Max. 80 m/min Working direction Right  Left The line consists of:  Decoiler Mandrel Cone-Ø 480 – 610 mm Drive / braking Hydraulic motor Lifting table Hydraulic  Coil opener / pinch roll unit Telescopic table Hydraulic No. of pinch rolls 2 Pinch roll-Ø 400 mm Driving motor 25 kw  Slitting head No. of heads 2 Shafts diameter 120 mm Main drive D.C. motor Driving power 92 kW  Scrap baller  Minimum scrap width 5 mm  Maximum number of slits 17 Slits up to 1.0 mm 5 Slits at 2.5 mm  Brakes Pneumatic Press up and dow  Re coiler Capacity 15 t Diameter 508 mm Driving power 120 kw  Term style 4 arms x 15 ton

Know-how included FOAMED PP Film Line: 540 mm wide, can produce 1200 - 1500 Kg per day (120-140 mic) Extrusion by Dipiemme,Italy (1991) With Piovan Dosaging(1998) Corona by Martignoni(2004) Scan-T Control by Roder Electronics Mechanical parts of the machine constructed by Off. Trevisani S.a.s Ferroli Cooling

Guttridge fully automatic powder filling line Consists of Easyflo screw elevator conveyor with vibratory sieve that directly fills a 50Kg stainless auger filler, 300g - 4000g weight range, suitable for filling pouches / tubs / cans, brand new touch screen plc controls, height adjustable frame, with infeed conveyor, 1Ph

- used, reconditioned WP bunroll line type Rollmeister Basic Line SC 37 - with used, reconditioned Multimatic head machine type MUC 4-row / 5-row - line complete stainless steel design - The following products can be made: sliced rolls, round / smooth dough pieces, baguette rolls, hot dogs, ribs - Capacity range: approx. 3,650 pcs/h - Weight range: - round dough pieces (sliced) 40gr. – 65gr. - long-rolled dough pieces (cut and uncut) 40gr. – 65gr. - 3-row operation: 40gr. – 85gr. - round / smooth dough pieces over pretzel discharge 40gr. – 85gr. Price on request.