packaging machines gma used for sale

With a long-dwell, continuous-flow, transverse-sealing system, the Tornado LD reaches packaging speeds of up to 100 packages per minute while delivering hermetical seals. The cantilevered construction houses the mechanical and electrical components at the rear of the machine in separate and protected areas. The sealing units and conveyor surfaces are housed at the front. The machine face is therefore free from obstacles and can easily be cleaned, preventing production waste from coming into contact with mechanical and electrical parts. The Tornado LD brings high performance levels, reduced maintenance, and is built with top-quality materials and components. These machines are built to last. Power supply: 3x400V Power: 3.5 kW Production year: 1998

Ricciarelli VS 70 packaging machine complete with Ricciarelli 10-head multihead. The packaging machine was completely redone 6 months ago and has been used very little since then, it is practically perfect. Selling due to switching to another type of packaging.

automatic packaging machine Model Pratika MPE possibility of purchasing in bulk with end-of-line oven for heat shrinking.

Machine to pack individual wet wipes. Dimensions: Sachet: Width: 45 to 110 mm Height: 70 to 130 mm Tissue unfolded: Width: 100 mm to 300 mm Height: 80 mm to 240 mm

Machine to pack individual wet wipes. Dimensions: Sachet: Width: 45 to 110 mm Height: 70 to 130 mm Tissue unfolded: Width: 100 mm to 300 mm Height: 80 mm to 240 mm This machine is equiped with a Jef Liquid filling installation. Head for filling tissues is also include, but might miss some parts (still available at volpack).

Cryovac VS20 packaging machine Cryovac C-106 automatic soaking tank Exit mat Rietschle VC 300 pump (01) Roots Pump Busch Typ GRH1000 Stainless steel pump chassis Fully revised in 2021, revised every year since. Perfect working condition

It has been used for detergents (WP,WG) packaging. Range of packaging: (200gr-10kg) Maximum width of the sealing roll: 910mm Bag Shape Options: Pillow bag Type: MEGA V Produced: 1999 Weight: 1800 kg Power consumption: 5.5 KW Electrical Supply: 380 V Air Consumption: 600 L/min, 6 bar MADE IN E.U.

Package dimension in cm: 50 x 30 Weight: 4900 kg Dimensions ( L x W x H ): 1100 x 500 x 540 mm Propulsion: 11 KW Ground driving pressure: 65 t Control: Manual With side loading box

MOSCA Pallet Packing Press Automatic Pallet Packing Press, Model KPK-121-18 Year of manufacture: 1999 The control system is S7. The strapping machine is equipped with 2 strapping heads, the second strapping head can be moved laterally. The press has an upstream, walk-in centering roller conveyor with turnstile. There is another turnstile under the press, which can be used to rotate the pallet before strapping. Occupancy dimensions including pallet: Length: 1,200 mm Width: 1,200 mm Height min. 500 mm max. 1600 mm Specifications: Infinitely adjustable belt tension: 200 – 2,000 N Belt guide speed: 4.6 m/s Closure Type: Friction Weld Closure Dimensions of the control panel: Width = 1,200 m, depth = 650 mm, height = 850 mm Dimensions of the packaging press: Max. vertical clearance: 1,600 mm Max. throughput width: 1,500 mm Length of the printing plate: 1,600 mm Pr ...

Cyklop XZE-311 Strapping Press Year of construction: 2003 Passage width: max. 2200 mm Passage height: max. 2200 mm Belt guide distance: 625 / 440 Roll pitch: 60 mm Strapping speed: 2.9 m/s Strapping force of the strapping unit: adjustable up to 2000 N Press force: adjustable from 5 to 48 kN Aggregate Type: CFH 1

Cyklop Strapping Press / Cyklop Pallet Press Year of construction: 2012 Type: XZE 30.2-18 DT Package: Length LL: 1,200 mm Width BL: 800 – 1,000 mm Height HP + HL (incl. pallet): 350 – 2,200 mm Weight: 50 – 1,500 kg 1 piece driven roller conveyor with centering Length: 1,950 mm Usable width: 1,100 mm Lifting height: 400 mm Roll diameter: 89 x 3.25 mm Roll sheath surface: galvanized Roll pitch: 150.8 mm Load: 1,500 kg Drive voltage: 400/230 V Centering Orientation: Centric Min. usable width: 600 mm Usable width max.: 1,200 mm Centering beam length: 1,400 mm

- Box : 3 x 4 / 3 x 5 / 4 x 6 - Boxes : many different sizes - With bottles of single-breasted MASPACK 110/14/RED for pressureless lining of bottles - Machine in perfect condition

Nova rotary conditioner R16 year 2017 very good condition fully faired equipped with tray for pots diam 95 pot unstacking function, dosing filling by piston, heat sealing possibility of filling buckets on the machine table CIP cleaning planned on schedule - machine dimensions: 940x1375x1807 (excl. tot 2246 with pot unstacker) - capacity/h: 1000 pots/h 500g pots - possible volumes 100g 125g 250g 400g 500g diameter 95 + buckets 5l 10l… - weight 500 kg - motor power: installed power 1.5KW power supply 400V3P+N+T 50Hz head disconnector: 12A minimum pressure: 6 bars max pressure: 7 bars average consumption: 14Nm3/h at 6 bars - very good condition machine from 2017 price excl. tax €59,000 - operation around 6 hours/week or around 1700 hours in total sin ...

Machine from 2005, efficient working. SIemens controller, technical documentation included. The machine packs with a capacity of 35-40 sachets per minute. Sachet range W 100-230 mm L 120-350 mm . The device is in good working order. Ready to go. On request, I can send you a video of the machine working

Hello, I would like to sell used (very good condition) semi-automatic liquid product filling equipment - a dispenser. Suitable for packing liquids, oils, cosmetics. There is automatic packaging mode. The machine is made in Germany, certified in the EU. Currently located in Lithuania.

Sidel Cermex SW 21.40 case packing machine Sidel Cermex SW 21.40 case packing machine Manufacturer: Sidel Type: SW 21.40 Year of manufacturing: 2009 Available: Immediately Speed max: 11,000 cartons/min Length: 150/450 mm Width: 140/375 Hight: 110/400

Horizontal hydraulic baling press with manual tying, brand: HSM, model: HL4010 Re, engine: 9 KW (12 hp), year: 2013, bale dimensions: 750x750 mm, bale weight: 280-300 Kg. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Sander Vario Master 9480 strapping machine Manufacturer: Sander  Type: Vario Master  Model: 9480  Type: Vertical Strapping Machine  Operating voltage: 400 V Power: 2 kW Control voltage: 24 V

ander Vario Master 9460 strapping machine Manufacturer: Sander  Type: Vario Master  Model: 9460  Type: Vertical Strapping Machine  Operating voltage: 400 V Power: 2 kW Control voltage: 24 V

Fabri Group packaging machine, model: Elixa xp-b.249.XS, serial number: 2-3295, year of construction: 2015, 230 V, 1 Ph, 50-60 Hz, 8.7 A, plastic belt, belt width: 320 mm, clearance: 320 mm x 120 mm, film width: 280 mm, total dimensions: 1300 mm x 1000 mm x 1240 mm.

Brimato packaging machine for cutlery, type: BVA 800, serial number: 110.926, 230 V, 50 Hz, 16 A, 1.5 kW, weight: 260 kg, plastic belt with dividers, belt width: 225 mm, divider height: 25 mm, distance between dividers: 60 mm, plastic outfeed belt with dividers, belt width: 250 mm, divider height: 20 mm, distance between dividers: 150 mm, film width: 280 mm, total dimensions: 1900 mm x 1000 mm x 1340 mm.

Description: • Packaging line with shrink tunnel, shrink wrapping machine • Max. width passage approx. 1270 mm • Max. height passage approx. 650 mm • Adjustable feed speed • Parts of the line: • 1 - Input driven belt conveyor: length 2500 mm, useful width 1250 mm • 2 - CMB EB-250/70 shrink plastic cutting and welding station: serial number 1111-05-93, cutting width approx. 2500 mm, maximum cutting height approx. 650 mm, supports for 3 upper and 3 lower plastic coils • 3 - Driven belt conveyor: length 2500 mm, useful width 1300 mm • 4 - CMB RB-130/70 oven for shrink plastic machine: serial number 1112-05-93, useful tunnel length approx. 2000 mm, passage width approx. 1270 mm, passage height approx. 700 mm, 2 exhaust fans, adjustable temperature • Dimensions for transport 10000 x 2300 x 2680 mm Approx. Onsite Dimension. (l x w x h): 11,830 x 3,430 x 2,680 mm, weight app ...

Description: • Packaging line with shrink tunnel, shrink wrapping machine • Max. width passage approx. 1250 mm • Max. height passage approx. 650 mm • Parts of the line: • 1 - Input driven belt conveyor, length 2100 mm • 2 - Shrink plastic cutting and welding station, cutting width approx. 2200 mm • 3 - Driven belt conveyor, length 2500 mm • 4 - Oven for shrink plastic machine, useful tunnel length approx. 2500 mm • Dimensions for transport 10000 x 2400 x 2180 mm Approx. Onsite Dimension. (l x w x h): 8,900 x 3,020 x 2,180 mm, weight approx.: 5,000 kg

Description: • Lot of stretch film for packaging • It includes: • 19 coils with dimensions: height 500 mm, outer diameter 220 mm, inner diameter 75 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 900 mm, weight approx.: 300 kg

Description: line consist folowing elements : , 1. Roller preparation station , 2. Transpot belt with measuring station of packs and printer , 3. Pack wrapping machine Beck packautomaten , 4. Hot air shrink tounel , 5. Atomatisatic angular transfer of packs , 6 . Extract transpot belt , 7 . PC with softuer for labbeling Approx. Onsite Dimension. (l x w x h): 17,000 x 2,000 x 2,000 mm, weight approx.: 2,500 kg

Bottle packaging line, for different formats (100, 250 and 1000ml) made up of: - INMAKSA feeding plate, made of Ø 1000mm stainless steel. - HISPAMEC filling and capping monoblock with intermittent operation, equipped with 4 filling heads and three formats, 100, 250 and 1000ml, at a max. speed. of 5000 bottles/h (depending on format). Intermediate station for the placement of plugs and obturators by means of a VIBRANT model A-40 vibratory feeder and a RHEIN-NADEL ESK 2001 type vibratory walkway Final station for threading caps with a head equipped with a magnetic clutch Documentation available

Fully reconditioned Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2023). The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed with a hopper with agitator screw inside, mechanically drive from out of the main machine (tooth wheels and axles). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil (correct by brake system). If there is no foil in the 1st cell, after cutting the foil in length, the machine will stop. The speed can be ad ...

Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is in a reasonable mechanical and electrical condition (renewed by Schuy, auftr. nr: 13632-01). The format on the machine is German Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 50 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor., Additional features:, Excluding:, - Datecoder., Type of Machine: Butter Packaging Machine, Capacity: ± 750 Kg/h, Capacity (Units): up to 50 packages per minute, Packaging Weight: 250 gram, Packaging Size: 100 x 75 x 35 mm (German standard), Packaging type: Bo ...

Fully reconditioned foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2023). The format on the machine is 250 gram, 100 x 75 x ±35 mm, bottom folding. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter between 40 - 90 packages per minute (depending on filling weight, product, product viscosity and quality packaging). Outfeed conveyor. On request we can do a dry test (without product) with your own foil o ...

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

Complete processed cheese packaging line existing out of a double-head automatic dosing / wrapping machine designed for the packaging of triangular portions of processed cheese, carton boxing machine and a banderol machine. The working process starts with the formation of the wrapping shells from reel-fed heat sealing aluminium foil for subsequent filling of processed cheese in the dosing station of the machine. A lid of heat sealing aluminium foil is placed inside the filled shell which is then folded over the lid and sealed by heated pressure pads. Each portion includes an internal ‘consumer-friendly’ easy opening tear strip and an external paper brand label. The portions are finally gathered in an 8 bundle configuration and carried onto the outfeed conveyor on a single lane. From here it is moved to the cartonising machine, adding the 8 portions in a carton box, adding a lid on th ...

Used IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be pack ...

Running direction: left to right, working width: 130mm, max. packaged goods height: 90mm, packaged goods length: 150mm, working height: 880+/-50mm, compressed air connection: 7bar, length: 2250mm, width: 1660mm, height: 1750mm, including documentation, packaging material, mobile conveyor belt to bridge the stamp gap, spare parts package consisting of sealing blade, cutting blade, thermal sensor and toothed belt, 4 pallets, approx. 100 rolls of biaxially shrinking, smoothly perforated PE semi-tubular film, 300mm wide and 30μm thick with 1000lfm per roll, with lateral film holder for semi-tubular film, on-site inspection is possible.

Elopak gable top ultra clean filling and packaging line with screwcap closing, model: Pure-Pak S120UC, serial number: 25033, year of construction: 2004, 400 V, 3 Ph, 50 Hz, 150/200 A, 15.000 kg, steam consumption: 5.8 kg/min, packaging type: Gable top 10 & 6-CU WA cartons, volume packages: 500 ml and 1000 ml, infeed belt width: 140 mm, total dimensions: 11000 mm x 2700 mm x 3800 mm. Including pallet with spare parts.

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Make : TREPKO Model : PKG 1S Cups : 8 Circles pre Minute : 32-40 Cup Sizes : 75 and 95mm Filling Volume : 50gr -500gr Stations : Cup denester - Filling - Aluminium Placing - Heat Sealing - Conveyor Condition : Good HEPA Filter Mounted Closed Cabin Safety Switches Control Panel Available : Immediately

Cup filling and sealing machine 67/95mm YOM 2014. As new, Only been used for a week.

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340

Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Flexipak Refurbished 3 years ago Speed : 1800 c/h on 125 g Cup dimensions : 73mm and 95 mm Comprises pot drop, liquid fill, lid drop, heat seal, over lidder Motorised 3 metre conveyer Heated 30 litre feed tank with stirrer.

Make : TREPKO Model : 222 KPS Year Of Manufacture : 2004 Machine Dimensions : 1,35 x 1,55x 3,32 metres with conveyor 3,2 meters Product : Butter / Margarine/soft products Cup Dimensions : 115 mm x 75mm Volume : Min 180ml | Max : 500ml Cleaning : CIP Hours : 688,45 Plastic Cup With Aluminium Lid and Cover Cap Condition : Good

Make : Regal Model : 9000 YoM: 2004 Refurbished in 2018 Current Cup Dimensions: 71 mm ( This can be changed on request) Speed : 2400 Cups per Hour Stations : Cup Dispenser- Filler - Aluminium Lid - Sealing - Outfeed conveyor Controls : Very Good condition Available : Immediately after service Location : Dairy Machinery UK