Manufacturer:
(Category: 1402)
A lifting, tilting, and sorting system for bulk materials within grid boxes is available. The system lifts the grid boxes approximately 3-4 meters high, tilts them into a transport vibrator, and the parts are then provided to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000kg, pressure: 140bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024.
Various conveyor belts, Z-slope conveyors, Z-track conveyors, belt conveyors and a conveyor belt with cleats from the manufacturers Göztepe and Lübke are available. Documentation for Göztepe available. On-site inspection is possible.
Two AmbaFlex spiral conveyors are available. 1) Height: 3100mm, infeed height: 1400mm, slat width: 400mm. 2) Height: 2650mm, inlet height range: 600mm-800mm, slat width: 400mm, defects: Torque support motor and missing foot disk. Can be repaired as required before sale. Documentation available. On-site inspection is possible.
Suction capacity: 78m³/h, final pressure: 60mbar, motor power: 1.5kW, speed: 1500rpm, weight: approx. 200kg. Documentation available. On-site inspection is possible.
A complete bucket conveyor system is available. 1) Mobile bucket, year of construction: 2016, volume: 1000l. With internal coating and drives. 2) Mobile bucket, year of construction: 2013, volume: 1000l. The machine is overhauled, including drives. 3) Mobile bucket, volume: 1000l. The machine is not overhauled, with drives and dismantled rotary motor. 4) Switch. 5) Running rails, length: approx. 150m, track width: 1000mm, year of manufacture: 1970-1995, including two 90° curves and partly with lattice girders and reinforcements. 6) Running rails, year of construction: 2018, length: approx. 96m. Including two 45° curves. The bucket conveyor system is without gantries. On-site inspection is possible.
Several roller conveyors are available for washing baskets that were set up in a low-dust production area. Wash basket width: 500mm. Single pieces without drive. Including swivel table. The roller conveyors are ready for collection.
A complete material conveyor system for plastic granulate is available. Components: Control system for 10 end devices, side channel compactor with filter and six color dosing devices for direct coloring, six material conveying pots. On-site inspection is possible.
A Kuttler automatic handling machine that moves workpieces or material blanks on a production line is available. Infeed height: 1050mm, outfeed height: 900mm, cutting and turning range: 90°, workpiece lowering: 150mm, machine dimensions X/Y/Z: approx. 14500mm/1000mm/2100mm, weight: approx. 750kg. Documentation available. On-site inspection is possible.
A total of 3 Ambaflex spiral height conveyors are sold. The conveyors are designed for the transport of goods/products upwards (other floor, second level in a bottling plant, etc.). Previously, trays were supplied with the conveyors. transported upwards. The machines are in top condition, some as good as new and ready for immediate use. The pictures show one of the three sponsors as an example. Data on the spiral conveyors: 1. Spiral height conveyor: - Make: Ambaflex - Year: 2021 - Capacity: adjustable, his max. 1,600 cartons/h - Total height (floor to conveyor outlet trays): approx. 7.90m - Overall set-up dimensions (incl. motor at the top): approx. 8.40 m Width of conveyor belt in the spiral: 0.30m 2. Spiral height conveyor: - Make: Ambaflex - Year: 2021 - Capacity: adjustable, his max. 1,600 cartons/h - Total height (floor to conveyor ...
Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings-Needle bearing: roller bearing-Inside: Ø 320 mm-Outer: Ø 359 mm-Width: 175 mm-Weight: 19 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams-Piston diameter: approx. 90 mm-Piston rod: Ø 40 mm-Diameter eyes: 35/35 mm-Stroke: 55 mm-Number: 2x cylinders available-Price: per piece-Dimensions: 555/210/H110 mm-Weight: 16 kg
Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers-Shaft: Ø 39 mm-Shaft length: 470 mm-Recording hole: Ø 17 mm-Number: 4 pieces of shock absorbers available-Price: per piece-Dimensions: 1755/140/H100 mm-Weight: 24 kg/piece
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams-Piston diameter: approx. 75 mm-Piston rod: Ø 40 mm-Stroke: 120 mm-universally applicable:-Number: 1x available-Price: per piece-Dimensions: 485/105/H105 mm-Weight: 11 kg
Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling-Claw coupling: Torsionally flexible claw coupling-Bohrung: Ø 10 mm-Dimension: Ø 108 x 95 mm-Weight: 3.5 kg
Universal milling head, milling adapter, milling extension, angle milling head, electronic spindle, linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, servo motor, electric motor, DC motor-Spare part comes: from a machining center BJM type ALBZ-145-Travel: 2430 mm-Servo motor: manufacturer Beckhof type AM3074-0Q40-0000-Max. Speed: 2500 rpm-Power: 7.35 kW-Torque motor: 48.8 Nm-Number: 2x rails available-Price: complete-Dimensions piece: 3740/200/H405 mm-Transport dimensions: 3740/400/H405 mm-Weight complete: 444 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams-Piston diameter: approx. 40 mm-Piston rod: Ø 25 mm-Stroke: 100 mm-universally applicable:-Number: 1x available-Price: per piece-Dimensions: 355/80/H50 mm-Weight: 3 kg
Safety relay, safety controller, emergency stop switching device-Manufacturer: pilz, safety relay-Type: PNOZ 230VAC 3NO 1NC-Number: 4x relay available-Price per piece-Dimensions: 110/90/H80 mm-Weight: 0.7 kg/pc.
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams-Piston Ø: approx. 80 mm-Piston rod: Ø 32 mm-Stroke: 148 mm-Number: 2x available-Price: per piece-Dimensions: 600/135/H135 mm-Weight: 13 kg
Hydraulic cylinder, support cylinder, hydraulic stamp, pressure stamp -Spare part: hydraulic cylinder from Mengele press brake -Equipment: with thread stop for depth limitation -Piston diameter: approx. 240 mm -Piston rod: Ø 200 mm -Stroke: approx. 380 mm -Piston rod holder: 212 x 212 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 840/410/H355 mm -Weight: 430 kg/piece
roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with electric drive -Roll width: 800 mm -Roll diameter: 110 mm -Axle distance: 200 mm -Drive: SEW-Eurodrive 0.37 kW 1415/64 rpm -Speed: 24 m/min -Total dimensions: 7370/1300/H1080 mm -Weight: 730 kg
Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling-Claw coupling: Torsionally flexible claw coupling-Boret: Ø 20 mm-Dimension: Ø 176 x 140 mm-Weight: 12,6 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams-Piston diameter: approx. 90 mm-Piston rod: Ø 40 mm-Diameter eyes: 35/35 mm-Stroke: 55 mm-Number: 2x cylinders available-Price: per piece-Dimensions: 485/120/H110 mm-Weight: 14 kg
Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt-Conveyor belt: with conveyor ribs-Width: 400mm-Length: 7120mm-Transport dimension: 1200/400/H300 mm-Weight: 26 kg
Central lubrication, oil circulation system, progressive pump, central lubrication unit, hydraulic unit-Drive motor: VEB type KMER B 63 K 2-Pump: 0.18 kW 2760 rpm-Tank: 300/220/H220 mm-Dimensions: 430/250/H460 mm-Weight: 24 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams-Piston diameter: 80 mm-Piston rod: Ø 36 mm-Stroke: 100 mm-universally applicable:-Number: 2x available-Price: per piece-Dimensions: 415/120/H110 mm-Weight: 14 kg
Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve. Shut-off valve-Manufacturer: Castel, collector valve/valve membrane, unused in original packaging-Type: 6110/22-Price: per piece-Number: 5 piece-Dimension box: 100/50/H40 mm-Weight: 0.1 kg/piece
Central lubrication, oil circulation system, progressive pump, central lubrication unit, hydraulic unit-Drive motor: Himmelwerk type 4Nga F 14/11-Pump: 250 V 0.88 kW 1430 rpm-Tank: 400/300/H200 mm-Dimensions: 700/320/H530 mm-Weight: 50 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams-Piston diameter: approx. 40 mm-Piston rod: Ø 12 mm-Stroke: 60 mm-Admission piston rod: M12 mm-universally applicable:-Number: 1x cylinder available-Price: per piece-Dimensions: Ø 55/H250 mm-Weight: 3 kg/piece
Dosing rotary valve, rotary valve, dosing lock, rotary valve for conveyor screw, transport screw, screw conveyor, conveyor technology, pipe conveyor screw-Manufacturer: Torex, 8-blade rotary valve with gear-Inlet opening: Ø 265 mm-Outlet: 250 x 245 mm-Transmission: Motovario i= 50-Drive shaft: see photos for dimensions-Dimensions: 540/410/H360 mm-Weight: 100 kg
Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor,-Manufacturer: Waeschle, rotary valve type AKD5 / 200-AC-Drive motor: SEW Eurodrive 0.37 kW-Speed: 1400/32 rpm-Operating temp. max .: 60° C-Inlet opening: Ø 200 mm-Number: 1x rotary valve available-Price: per piece-Transport dimensions: 530/500/H495 mm-Weight: 72 kg/piece
Innovac GmbH
