Manufacturer:
(Category: 1402)
Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, Guide cylinder type DFM 16-10-PA-GF 170832 -Piston: Ø 16 mm -Stroke: 10 mm -Max. pressure: 10 bar -Number: 4x cylinders available -Price: per piece -Dimensions: 60/70/H30 mm -Weight: 0.5 kg/piece
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder type DNC-32-25-PPV-A 163305 -Stroke: 25 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / M10 -Max. pressure: 12 bar -Number: 2x cylinders available -Price: per piece -Dimensions: 200/45/H45 mm -Weight: 0.6 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo, compact cylinder type ADVU-20-5-PA 156514 -Stroke: 5 mm -Piston: Ø 20 mm -Piston rod: Ø 10 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 48/37/H37 mm -Weight 0.2 kg./piece
Valve islands, multi-pin connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve terminal CPV14 -Type: CPV14-GEMP-4 CPV14-VI -Valves: Festo 161 361 4 pieces -Individual components: see photos -Dimensions: 150/140/H100 mm -Weight: 1.4 kg
Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: torsionally flexible claw coupling -Type: Shaft Ø 10/19 mm see photos -Dimensions: Ø 40 x 57 mm -Weight: 0.1 kg
Spiral, 3 feeds and 1 outlet, height approx. 11m – used - Price ex location: 9.500.-€ (net) dismantled, packed and loaded! Manufacturer: will be submitted later Type: will be added later Year of Make: 2017 Floor heights will be added later The boxes / cartons were conveyed down from the picktower from floors 1, 2 and 3 and then over to the sorter at a height of about 3m Floor heights approx. 3.50m, 7m and 10.50m Condition: good Available: from approx. Mid-November 2025 Location: NRW
Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Case: made of stainless steel -Condition: Fans are unused (stock items) -Manufacturer: Ferrari, axial fan axial fan -Type: EF 905/I 4S/B A24 -Engine: Ferrari 11 kW 4P 160 50 Hz -Number: 3x fan available -Price: per piece -Dimensions: Ø 1000 x 675 mm -Weight: 196 kg/piece
Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Housing: galvanized steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 100JM31/04/09/22 50Hz 2L D160 -Power: 11 kW 1465 rpm -Fan wheel: Ø 1000 mm -Number: 1x fan available -Dimensions: Ø 1245 x 800 mm -Weight: 237 kg
Item : 3Hp Class H Air KNife Blower Motor Quantity: 4 Units Centrifugal Fan FCV 105 CW 90 3HP 2Pole 3Phase 64cmm(max), 60mmag(max) Motor : H series Impeller body material : Cast Iron Casing body material : Cast Aluminium c/w :- - Base height adjustable Project: F40 Air Knife System PIC: Ainaa +60 17-303 9528 Nurin +60 17-577 3739 FULL ADDRESS F40: Lot 67330, Off Jalan Meru, Batu 5 1/2, 41050, Mukim Kapar, Daerah Klang, Selangor
Offer 4x Cargo-Liner SP1/SP4 VKD suitable for the Linde tow tractor Linde P30C. Max. payload 500 kg Max. towing weight 3000 kg The cars are little used and in good condition.
Crane block, crane hook, load hook, single hook, bottom block -Cover: Lid for crane bottle 2 pieces / = 1 set -Type: unfortunately without type designation -Bore: Ø 50 mm -Quantity: 2 sets available -Price: per set -Transport dimensions: Ø 278 x 60 mm -Weight: 2.8 kg
Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Case: made of stainless steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 112JM/31/4/6/223S D160L -Power: 15 kW 1465 rpm -Number: 3x fan available -Price: per piece -Dimensions: 1350/1350/H830 mm -Weight: 300 kg/piece
Side channel compressor, side channel blower, ring blower, vacuum pump, blower, radial fan, pressure blower -Manufacturer: cimme, pressure blower radial fan type GBJ F08080 E4 LG -Drive: 18.5 kW -Speed: 2945 rpm -Volume flow: 75,000 m³/h -Pressure: 50 kgf/m² -Connection input: Ø 250 mm -Connection output: Ø 250 mm -Protection class: IP 55 -Fan wheel: -Number: 1x pressure blower available -Price: per piece -Incl.: 2 silencers -Dimensions: 1320/910/H1550 mm -Weight: 480 kg/piece
Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Housing: galvanized steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 90JM/25/4/9/24 3S M3AA132MA INT BMLESS -Power: 7.5 kW 1462 rpm -Fan wheel: Ø 900 mm -Number: 3x fan available -Price: per piece -Dimensions: 1140/1140/H610 mm -Weight: 140 kg/piece
Crane block, crane hook, load hook, single hook, bottom block -Cover: Lid for crane bottle 2 pieces / = 1 set -Type: unfortunately without type designation -Bore: Ø 55 mm -Transport dimensions: 350/350/H60 mm -Weight: 5.6 kg
A Servus Intralogistics conveying system for PET canisters is available. Documentation available. An on-site inspection is possible. Expected to be available from 2026.
Pagus Maschinenhandel Online Shop
