om lathe used for sale

Special attachment for lathes gt; for reworking crankshafts - this attachment can be fixed on top of the cross-slide - via a pneumatic cylinder the top part of the attachment can tilt op to allow the crankshaft to be installed in the chuck - once the crankshaft has been installed in the chuck of the lathe the top part can be closed and positioned around the area that needs to be reworked - once activated the tool insert of the attachment will start turning around the crankshaft to remove excess material. The chuck does not have to turn the crankshaft! The advantage of this concept is that the tool moves around the crankshaft - by doing this the least amount of stress is put on the crankshaft. This in contrast to the classic setup where the stationary tool is pressed into a workpiece being turned by the chuck of the lathe. Max dia of crankshaft: 330 mm

Schutte AF 42-8 Multispindle Lathe • 8 spindle mechanical lathe • CNC controlled and chip conveyor at stations 6 and 7 • Automatic shaft loading • It is in working condition

Manufacturer UNIVERSAL LATHE POTISJE EXCELLENT CONDITION, USED ONLY FOR SUPERFINISH AFTER GRINDING Model PA-45 Year Condition used Location Slovenia Price 26.500,00 € Category Lathe Subcategories Stock Number Serial Number Max turning lenght 3000mm Turning over bed 600 mm, Spindle bore 140 mm, Turning in cranking 1.200 mm Face plate 800 mm

Voest DA180-52-800 - Universal lathe - the machine is completely revamped and as good as new - CE conformity - Sino SDS6-3V 3-axis position indicator - 3-jaw lathe chuck Ø 200 mm - Multifix Type B - Coolant device - Work area lighting Specification - Center width: 800 mm - Center height: 180 mm - Turning diameter over bed: 380 mm - Turning diameter via slide: 200 mm - Quill holder: MK4 - Spindle bore: 52 mm - Bed width: 330 mm - Speed levels: 12 - Speed range: 33 - 1500 rpm - Feed speed: 0.072 - 0.54 mm - Metric threads: 0.5 - 3.625 mm - inch thread: 7 - 46 tpi - Motor power: 3 kW - Voltage: 400V - Dimensions WxHxD: approx. 2100 x 1650 x 1050 mm - Weight: approx. 1200 kg

Lathe H.Ernault 250HN This lathe is brand H. ERNAULT Batignolles type 250HN, it has been used very little, the interpoint is 2m.

The lathe is in good condition. Berg lathe chuck. Full technical documentation turret: 12 - VDI-40 tools max. spindle speed 4000 /min passage 90 mm max. roll 600mm max turning length 1000mm machine weight: 7.5 tons

Type: E 30 Parameters: Manufacturer: Weiler Year of production / SO / GO: 2018 / - / - Description: Lathe in good technical condition, after agreement the possibility of testing. Maximum turning length (Z axis) 750 mm. Turning diameter above the bed (max) 330 mm. Maximum rotation speed of the main spindle 4500 1 / min. Total power consumption 15 kW. Lathe weight 1.7 t.

Head lathe, face lathe Manufacturer Ravensburg Type PKZ Center height 1140mm Center width 3000mm Turning diameter over base plate 2200mm Turning diameter via bed carriage 1700mm max. workpiece weight in the feed 3000kg workpiece weight between the tips 8000kg The machine is technically and optically in very good condition.

This Mazak SQT-200 Lathe was manufactured in the year 1997 in the United of Kingdom. It is equipped with a Mazatrol T PLUS control unit. The machine has a Lathe chuck kitagawa 8” + 10” and disposes of a Mayfran chip conveyor.

This Takisawa TCY-160YS L5 Lathe was manufactured in the year 2015. It is equipped with a FANUC Seris 32i B. The machine has a spindle speed of 6000 rpm. Simultaneous machining with spindle and counter spindle based on bar capacity of 42mm. As an Opposed Twin-Spindle CNC Lathe with a max. turning diameter of 220 mm and max. turning length of 491 mm it provides a solid turning solution for machinists.

This Takisawa TCY-160YS L3 Lathe was manufactured in the year 2016. It is equipped with a FANUC Seris 32i B. The machine has a spindle speed of 6000 rpm. Simultaneous machining with spindle and counter spindle based on bar capacity of 42mm. As an Opposed Twin-Spindle CNC Lathe with a max. turning diameter of 220 mm and max. turning length of 291 mm it provides a solid turning solution for machinists.

For sale: Multi-axis CNC lathe from Hyundai-Wia type LM 1600TTSY + LNS 3-meter bar magazine type Alpha 552. Beautiful versatile CNC lathe with lower and upper turret with 12 positions and intermediate positions each. The upper turret is additionally equipped with a Y-axis with a displacement of 100 mm (+50, - 50 mm). The machine is equipped with two identical spindles with a bar passage of 51 mm and a maximum speed of 6,000 rpm. The maximum turning diameter is 230 mm and the maximum turning length is 705 mm. Driven tool holders can be stored in all positions! The maximum speed on the driven tool is 5,000 rpm. The main motor power on both spindles is 15/11 kW and they are built-in spindle motors! The machine is also equipped with an automatic tool presetting device, a workpiece collecting device, a workpiece extractor for the right spindle, a workpiece discharge conveyor for the finished  ...

Disc lathe Lathe for plates, bowls, rings, wheels, etc. Manufacturer: Hempel Model: ERSP / ER/Sp 4 Workpiece diameter: max. 400 mm Workpiece thickness: max. 80 mm

Lathe in good condition and fully functional. Used Lorch LAS small lathe, supplied with all the accessories you see in the photos.

SPINNER TTC 300- 52 SMMCY CNC Lathe YOM 2012 Twin-opposed-spindle, twin-turret lathe Control FANUC 31iT Swing diameter 400 mm Max. turning dia ~200-250 mm Max. turning length 400 mm Travels: X1 180 mm, X2 110 mm, Z 450 mm, Y +40/-40 mm Rapid traverse: X1 15 m/min, X2 15 m/min, Z 24 m/min, Y 15 m/min With C-axis Main Spindle 1: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Spindle bore 52 mm Spindle speed 0-5000 rpm/ 19 kW Performance Pmax 23,5 kW Torque 150 Nm Spindle nose A6/DIN Sub-Spindle 2: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Can be moved on a slide to take over spindle 1 Spindle speed 0-7000 rpm/ 8 kW Performance Pmax 13,8 kW Torque 189 Nm Spindle nose 100 mm Turret 1: At the top of the ...

This HAAS ST-15 lathe was manufactured in 2019. It is equipped with a hydraulic chuck sizing 210 mm and offers spindle speeds up to 4000 rpm, with driven tool speeds reaching 6000 rpm. The machine includes a 12-position BOT/VDI type tool head and features axis movements with X at 100 mm and Z at 406 mm. For more information about this lathe, please reach out to us.

The DOOSAN TT 1800 SY lathe, manufactured in 2006, features a FANUC Series 18i-TB control. It boasts robust features such as a sub-spindle, driven tools, dual C-axes, a Y-axis, and twin turrets. Additional amenities include a parts conveyor and a chip conveyor. Note, the automatic bar feeder requires some adjustments for optimal performance. Reach out for more information about this DOOSAN TT 1800 SY lathe.

This lathe was manufactured in 2015 by DMG, Sprint 65 3 T model. The machine represents a reliable and versatile addition to your production line. If youre interested in buying this DMG Sprint 65 3 T lathe, reach out for further details.

This WEILER E 40 x 1000 was manufactured in 2012. It features a centre distance of 1000mm, a circulation diameter in the bed of 435mm, and a spindle bore of 66mm. The machine has a speed range of 1-3,500rpm and weighs 3400kg. This opportunity to buy the WEILER E 40 x 1000 lathe could be ideal for a variety of turning applications. Contact us for further details regarding this lathe.

This 5-axis DOOSAN Lynx 2100LSYA lathe was manufactured in 2020. Featuring a SIEMENS SINUMERIK 828D control, it offers spindle speeds up to 6000 rpm and includes a sub-spindle for versatile operations. With a max turning diameter of 300 mm and length of 510 mm, it also has driven tools and rapid traverse rates up to 36 m/min. Consider this Doosan Lynx 2100LSYA lathe, ideal for advanced turning tasks. For more information, please reach out to us.

This 3-axis Doosan Lynx 2100LMB lathe was manufactured in 2021. It features a SIEMENS SINUMERIK 828D control, a spindle speed of 4500 rpm, and a max turning diameter of 300 mm. The machine offers a max turning length of 510 mm and includes driven tools and a chip conveyor. The Doosan Lynx 2100LMB machine we have for sale is a reliable choice for efficient and precise metalworking. Reach out for more information about this lathe.

This 4-axis MIYANO BNJ 42S lathe was manufactured in 2004, featuring dual turrets and a Fanuc 18iT control for precision turning operations. It has a bar passage capacity of 42 mm and spindle speeds up to 5000 rpm. Equipped with a LNS Hydrobar MiniSprint bar loader and both standard fixed and motorized tool holders, this machine optimizes productivity. Consider the MIYANO BNJ 42S machine we have for sale. For more information about this lathe, please reach out to us.

This 5-axis TORNOS Swiss DT26 lathe was manufactured in 2019, featuring dual spindles and a Fanuc Series 31i-Model B control unit for advanced turning operations. It supports spindle speeds up to 10000 rpm and includes a Tornos Robobar SBF 326 bar feeder for efficient material handling. The machine comes with a selection of tool holders and comprehensive documentation, ensuring readiness for oil and gas parts production. Consider buying this TORNOS Swiss DT26 lathe. Contact us for further details.

This DOOSAN PUMA 700L lathe was manufactured in 2020. It features a FANUC control unit, maximum swing of 1030 mm, and a cutting length up to 3200 mm. The machine is equipped with a chip conveyor and a steady rest, enhancing its robust turning capabilities. With a bar capacity of 164 mm and chuck size of 609 mm, it efficiently handles substantial workpieces. Consider buying this DOOSAN PUMA 700L lathe. Reach out for more information.

Mechanic lathe, mechanic lathe AVM 45/12 Center height: 120 mm Center distance: 455 0 mm Turning diameter over bed: Ø 240 mm spindle bore: Ø 21 mm revolutions: 75 - 2980 rpm with 6 tool holders and set of collets. engine: 0.5 kW 380 V used, tested ! Dimensions: 1500 x 600 x 1200 mm

turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 1000 mm turning diameter in the gap: 530 mm turning speeds: 65 - 1810 U/min centre height: 205 mm spindle bore: 52 mm tailstock quill taper MT: 4 total power requirement: 2,2 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stop for lathe support, longitudinal stop, lathe, support stop -Support length: approx. 45 mm -Clamping height: up to approx. 20 mm -with: adjusting screw -Dimensions: 72/54/H46 mm -Weight: 0.6 kg

Tool changer for lathe, tool disk turret, top support, top slide, dovetail guide -for: max. 6 tools -Changer comes from a Gildemeister CNC lathe type: NEF 560 - Tip height: 105 mm -Turning chisel holders: 25 x 25 x 100 mm -Quantity: 2 pieces available -Price per piece -Dimensions: 315/315 / H380 mm -Weight: 87 kg

Lathe, lathe, mechaniclathe -Handover in the current condition as seen -Scope of delivery: according to pictures -Speeds: 2600/1500/1050/650 rpm -Spindle Bore: 23mm -Intake: clamping sleeves/threaded mount M37 x 3 mm -Dimension: 850/430/H1160 mm -Weight: 288 kg

For sale; Goodway double spindle CNC lathe type GTS-200MMX equipped with a Fanuc 0i-TF control with manual guide i dialog part! This CNC lathe is equipped with 2 turrets. The left 12-position turret has no driven tool positions, the right 12-position turret has driven tool positions. The left spindle has a rod passage of 51 mm and is equipped with a 185E collet device. The right spindle is equipped with a Ø 210 mm chuck! The main engine power is 11/15 kW. The maximum turning diameter is Ø 280 mm. The movement X1, X2 is 190/220 mm. The movement Z1, Z2 is 270/740 mm. The machine is equipped with a chip conveyor with right-hand ejection and an LNS bar magazine type Servo III. Can still be visited under electricity, subject to prior sale.

Miyano cnc lathe. Lathe with 2 spindles and motorized tools. Year-1995 Main spindle bar pitch diameter- 42 Sub-spindle collet (35 max) Revolutions -5000rpm Motorized collet -Max 12 Max. turning diameter- 114 S INCLUDES - Coolant tank: 160-Pieces collector-Pieces conveyor belt-LNS bar loader -I also delivered a new servo amplifier that I had for safety (A06b-6089-H206) valued at more than 1500 -And the Encoder of the main spindle bought new (more than 700) The price can be negotiated a little

Lathe with combined control system CNC / manual Max. adjustable diameter over bed - 483 mm above the carriage - 282 mm Processing range Distance between centers - 1219 mm Max. processed diameter - 406 mm Poppy. machining length - 1219 mm (when turning between centers) Spindle Max. spindle rotation speed - up to 2000 rpm (stepless regulation) Max. moment - 203 Nm at 150 rpm Spindle power, max. - 8.9 kW Spindle landing - A2-6 The lathe chuck is not included in the basic delivery Spindle bore - 76 mm Feed X-axis travel - 203 mm Travel along the Z axis - 1219 mm Force of movement along the X axis - 13.8 kN Force of movement along the Z axis - 10.4 kN Idle travel speed along the X axis - up to 1.9 m / min Idling speed along the Z axis - up to 3.8 m / min Instrumental post not included Tailstock Back Center Taper - MK4 (Center Not Included) Travel stroke length - 1219 ...

I will sell a universal lathe made by Korea, type Huichon-500 x 1500, year of manufacture, 1989, after renovation turning length in centers 1500 mm, turning diameter over bed 580 mm, turning diameter over slide 280 mm, accelerated slide feeds, spindle passage 76 mm, machine weight about 3200 kg, cooling system, lighting (24V lamp), Very stiff and accurate. The machine is after renovation, i.e. the bed, transverse slide, tool slide, clamp have been reground, turning parameters have been set (the accuracy of turning corresponds to a new machine), it has new bearings and replaced or regenerated worn elements. The lathe is fully operational. It is equipped with: hardened bed, new position readings, new chuck fi 250 / left and right jaws, independent chuck fi 400.

Haas SL-10T CNC Lathe New turning tools are also included(paid approx. €3440), chuck (packs) for individual production and chuck (cartridges) for working from bar. The machine is in operation and the condition and accuracy can be tested. The lathe has an arm with a probe for quick tool presetting. Maintained regularly.

Feeder lathe Traub Tnl 32G + FMB turbo 5-42 The machine is from 1996. The machine tool has two eight-tool turrets, including one fixed and one torsion (B axis). Both heads have all driven sockets. The lathe is equipped with a spindle with a support sleeve, a counter spindle and a part gripper. A belt chip conveyor is built into it. The feeder feeds bars in the diameter range from 5mm to 42mm with a maximum length of 3m Main parameters: Spindle: 32mm bore Speed ​​max.6000 rpm Power=11kW Revolver 1: X = 60mm Z = 320mm Power = 1.5kW Revolver 2: X = 180mm Z = 1200mm B=0-90 degrees Power = 1.5kW counter spindle: Z = 800mm Speed ​​max.6000 rpm Power = 4.4kW In addition, tool holders are included with the machine.

DMG Mori #CTV-250-2nd, Vertical CNC lathe, Siemens Sinumerik 840D control, 28 x 12 table, 60 m/min X, 40 m/min Z, low hours, 2016 CTV 250 CNC vertical turning centre right hand version with control SIEMENS SINUMERIK 840D SLIMline Compact, fast, flexible and highly productive vertical lathe All axes X, Z, C are arranged at the top Large Z-axis stroke - thus machining of short and long workpieces with little set-up, Diameter up to 220 mm Control panel integrated into the machine - little space required

NAKAMURA WT-150 cnc lathe 1 USED CNC LATHE NAKAMURA WT 150Y - Year: 2004 -Max swing over bed : 190 mm - Standard machining diameter: 309 mm - Max machining length: 550 mm - Diameter bar capacity main spindle : 51 mm - Diameter bar capacity sub spindle: 41 mm - Main spindle power: 15 kW - Sub spindle power: 11 kW - Spindle speed: 6000 rpm -Y Axis on the high turret - 2 Turrets / 12 stations with rotating tools Equipped with: - 1 CN FANUC 18 iT - 1 Polygon option - 1 Parts recovery - 1 Set of collets - 1 Set of fixed and rotating tool holders - 1 Chip Conveyor

TRAUB Sonim TND 200 CNC Lathe YOM 1994 CNC Lathe – Inclined Bed Type TRAUB TX8F CNC control Turning diameter 350 mm Turning length 200 mm Total power requirement 20 kW Turning diameter over bed slide 200 mm X-axis 180 mm Z-axis 300 mm Spindle bore 42 mm Spindle motor 12 kW Spindle turning speed range 10 – 5000 rpm Feed speed X:155, Z:250 mm/min Rapid Travel Speed X-Axis 15 m/min Rapid Travel Speed Z-Axis 25 m/min Weight of the machine ca. 4 t Dimensions of the machine ca. 6.5 × 1.5 × 1.75 m 12-fold revolving head Traub Bar loader 3-fold power chuck Chip conveyer

We hereby offer this used TOS Sua 125 CNC lathe from 2011, located in Finland. Equipped with an advanced Fagor 8055 control unit, this machine ensures precise and efficient operations. With a substantial turning length of 1920 mm, it caters to a diverse range of metalworking tasks. The low-speed 630 rpm spindle, coupled with a robust 37 kW motor, guarantees powerful and accurate machining. Invest in this reliable CNC lathe to enhance your production processes, delivering exceptional results with every project. Technical specifications: Year: 2011 Made in: Czech Republic Control unit: Fagor 8055 Turning diameter: 1250 mm Turning length: 1920 mm Swing over carriage: 930 mm Distance between centers: 2000 mm Height above bed. 625 mm Cutting force: 10000 N Spindle speed: 4 - 630 rpm Spindle bore: 128 mm Spindle nose: ČSN ISO 702/II Motor power: 37 kW Dimensions: Length: 5 ...

Lead & Pull Screw Lathe TOS SV 18 RA Year of construction approx. 1980 The machine is in good used condition and works perfectly. Transport or delivery can be arranged. Of course, loading technology is available at the time of collection. Specifications: Center height 180 mm Circumferential diameter over bed 380 mm Circulation diameter over support 215 mm Center width 1000 mm Spindle bore 41 mm Speed range 14 - 2800 rpm. Longitudinal feeds 0.02 - 5.6 mm/rev Feeds flat 0.01 - 2.8 mm/rev metric pitches 0.2 - 140 Inch thread 1/5 - 140/1" DP thread 1 - 224 DF Module thread 0.2 - 70 m Drive power 6.0 kW Dimensions approx. 2200 x 1000 x 1400 mm Weight approx. 1800 kg with -Arbor - Three-jaw lathe chuck - Moving grain tip The machine can be viewed at any time.

DOOSAN Z340SM Double mirror / double turret / C1 + C2 - Axis - Driven / CNC Milling Center, Control: Fanuc Series 18 - T, Note: With the exception of the A6 collets on the lathe, On request, 2 pieces of 10-inch mirrors can be supplied. Upper spindle speed 50 - 5000 rpm Lower spindle speed 60 - 6000 rpm Upper tool holder 12 pieces Lower tool holder 12 pieces The weight of the machine is 6,000 kg Lathe accessories. Chip conveyor Pumpali Too: 4 VDI40 driven tool holders and Live molds are available for 2 VDI40 C-axes. In the picture is the German-made 1800 mm driver with loading magazine,

Used conventional lathe Brand: TRENS Model: SN 630 S Year: 1996 Weight: 3800kg Lathe data: Distance between points: 3000mm Bench turning diameter: 645mm Dump diameter on cart: 350mm Turning diameter without neckline: 880mm Reed pitch: 77mm Point: Morse taper 5 Speeds: 18 (10 up to 1600rpm) Maximum weight of clamped piece: 1500kg Includes: - 310mm TOS 3-jaw chuck with sets of interior, exterior and soft jaws - 4-claw plate 500mm - Closed rear window 140mm - Closed rear window 260mm - Quick change turrets with 5 tool holders - All accessories in the photographs - Fagor 3-axis display Complies with CE regulations. It has a complete user manual in Spanish.

This DOOSAN LYNX 220LMA Lathe was manufactured in 2007 in South Korea. It is equipped with a FANUC Oi-TC control. The machine has 2 axes (X-Axis Travel: 175 mm, Z-Axis Travel: 330 mm), a max. turning diameter of 320 mm and a max. turning length of 322 mm. It comes with 24 turret stations and a spindle speed range of 60-6000 rpm. Swing over bed is 510 mm and swing over carriage is 290 mm. This lathe is in good condition, only the coolant pump has an issue which requires a technical review.

Lathe beds, unused Compakt 5 , Compakt 8, Compakt 11, Super 11 Miscellaneous: clamping tables, angle tables, steady rests, lathe spindles, milling spindles, ...

This 3-Axis lathe was manufactured in 2008 by MAZAK, model SQT 100M. It features a maximum workpiece diameter of 280 mm, length up to 305 mm, and operates with a MAZATROL 640T control system. Equipped with a spindle speed of 6,000 rpm and a power of 7.5/5.5 kW, it holds up to 12 tools. Notably, this lathe offers reliable performance for precise machining tasks. The MAZAK SQT 100M machine we have for sale is a steadfast addition to any machining fleet. Contact us to explore this opportunity further.

This 8-axis lathe, manufactured in 2008, the DMG Gildemeister Sprint 50 Linear, features a Fanuc 300I control system, 3 turrets, a sub-spindle, and comes with a diverse set of tool holders: 4x Z driven, 3x X driven, and 3x adjustable/X driven. Including 74687 operational hours and 45426 production hours, it also comes with a box of electrical/spare parts and a bar loader from IEMCA (Boss 552-HD). Consider the opportunity the DMG Gildemeister Sprint 50 Linear lathe we have for sale represents. Contact us for further details.

Support , traversing carriage of a Schaublin lathe, sgt. Condition See photos ! Rotatable, feed via lever, feeder, axles are clampable! Is for a lathe brand Schaublin ! Shipping possible !

Description: Turning diameter over bed: approx. 280 mm Turning diameter over support: approx. 140 mm Center width: approx. 400 mm Spindle bore: approx. 27 mm Speed range: 100 - 2000 rpm With drilling unit installed on the lathe (see pictures) Internal size designation of the lathe: 260 x 500 weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,600 mm

This 2-Axis lathe, manufactured in 1996, offers precision and versatility. With a turning diameter of 42mm and max. turning length of 280mm, it boasts a Siemens C200-4D control system. Equipped with 2 turrets and a bar loading magazine LM 3200, it facilitates efficient production. Notable features include backside machining in 3 positions and a synchronous spindle on turret 1. Thread milling and polygon turning capability enhance its functionality. For those seeking reliability and performance, consider this INDEX ABC 42 lathe. Contact us for further details.

5-Axis lathe manufactured in 2006. This MAZAK Integrex 400-IV-S x 1500 boasts a Hainbuch centrofix with a 12-inch chuck on the main spindle and a Hainbuch collet topplus 100 on the sub spindle. Equipped with a Robojob robot turn assist, Mayfran chip conveyor, and extraction system. Ideal for precision machining tasks. For those seeking efficiency and reliability, consider this MAZAK Integrex 400-IV-S x 1500 lathe we have for sale. Contact us for further information.