oil extractor used for sale

Description: - Approx. Onsite Dimension. (l x w x h): 600 x 500 x 1,000 mm, weight approx.: 50 kg

Description: Without content Approx. Onsite Dimension. (l x w x h): 1,200 x 1,100 x 380 mm, weight approx.: 70 kg

Description: For all other technical data, see type plate Approx. Onsite Dimension. (l x w x h): 500 x 470 x 1,180 mm, weight approx.: 100 kg

Description: Incl. workshop trolley Approx. Onsite Dimension. (l x w x h): 800 x 600 x 1,000 mm, weight approx.: 30 kg

Description: Type : Oil Transformer Variation : Hermetic Make : CG Power System IRELAND LTD. Year of construction : 2016 Condition : New Nominal power : 3200 KVA Medium voltage : 22 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Cooling Type : KNAN Total weight : 7366 Kg Oil weight : 1760 Kg Mineral OIL Elster Length: Width: Height: Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery . Available Mon to Sat 8 a.m. to 10 p.m.

Oil Mist Detector Make: Daihatsu Diesel Type: MD-9M Conditon: Used

Filter system, oil mist separator, oil mist separator, air filter, mist separator, oil mist filter, oil and emulsion mist separator, particulate matter filter, oil mist air purifier -Manufacturer:AOF Air-O-Filter, oil mist separator filter system type AF-10P with base frame -Motor: 0.2 kW -Filter performance: 11 m³/min (660 m³/h) -Quantity: 1 piece available -Total dimensions: 900/480/H1830 mm -Weight: 81 kg

Description: Heating output 12 kW , Power consumption 14.9 kW Media thermal oil filling quantity 20 liters Approx. Onsite Dimension. (l x w x h): 1,400 x 500 x 1,000 mm, weight approx.: 120 kg

Description: Heizleistung 12 kW , Stromverbrauch 14,9 kW , Füllmenge 20 l max. Temperatur 200° C Approx. Onsite Dimension. (l x w x h): 1,400 x 500 x 1,000 mm, weight approx.: 120 kg

Description: Fabrication number: 1649044 Operating pressure: 60 bar Speed: 6300 rpm Approx. Onsite Dimension. (l x w x h): 300 x 250 x 200 mm, weight approx.: 40 kg

OEM Oil Pump - Turbine Side (p.n. 48) for ABB VTR 400 Turbocharger The Pump is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

OEM Oil Pump - Blower Side (p.n. 47) for ABB VTR 400 Turbocharger The Pump is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

Approx. Onsite Dimension. (l x w x h): 400 x 400 x 700 mm, weight approx.: 40 kg

Description: Technical details: Volt 220 V, connected load 0.95 kW, additional information: ELBARON - ISI Industrieprodukte GmbH, type: EBR 2500 D EBR 2500 D, for extracting oil mist, emulsion mist (for emulsions with higher oil contents) and smoke. The ELBARON filter series was developed for use in machining with pure oil or for separating oil mist and smoke. The ionizer/collector cells, which we specially manufactured with high precision, in combination with the coordinated, very powerful high-voltage transformer and many other well thought-out details result in one of the most powerful electrostatic filter systems on the market. The ELBARON electrostatic filter system is an electrostatic filter system that has been tried and tested for years and is used 10,000 times worldwide. weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 800 x 1,300 mm

Description: Technical details: liter output 20550/42 degrees Qa, coolant R134a/1430 refrigerator Pressure 20 bar, total power requirement 14.5 kW, additional information: The models in the HYFRA Gamma series are designed as immersion coolers for cooling water, oil and emulsion. The plug-and-play immersion coolers can be installed and can be used with an area requirement of just 0.5 m². This makes them very suitable for integration into various machine layouts. Outputs of up to 28 kW are available in just 0.5 m2 thanks to the compact design Stand space possible. This results in significant flexibility advantages when planning the production area layout and a significant increase in productivity because there is space for more producing machines. In the compact models of our immersion coolers, the condenser is installed horizontally. Thanks to this type of construction, the immersion coo ...

Key data: 90 m³/min, 3 , 20

Ingersoll-Rand Oil Free Screw Air Compressor L90I A3.5 -14-16-50 pressure generators from 2014, complete (closed module) 1 available Class 0, 1,190 m3/h, 7 – 10 bar. Compressor Ingersoll-Rand L90I Manufacturer: Ingersoll-Rand Model: L90I A3.5 -14-16-50 Type: oil-free screw compr. Class 0 Serial Number: UCV1002567 Volume flow rate [m3/h]: 1,190 Output pressure [bar]: 7 – 10 Power [kW]: 90 Year of construction: 2014 Running hours [h]: – Weight [kg]: 2.210 Dimensions LxWxH [cm]: 310x160x235

Description: Hydraulic output up to 250 l/h depending on setting Foreign oil discharge 35 l/h Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,400 mm, weight approx.: 60 kg

Approx. Onsite Dimension. (l x w x h): 5,300 x 1,300 x 3,300 mm, weight approx.: 2,500 kg

Recon Part number: 002 180 34 01 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Description: Workpiece turning circle 180 mm Workpiece length - max. 650 mm Horizontal rotating device for centrifuging process media (oil, emulsion) Workpiece clamping pneumatic between centres No control cabinet available Was integrated in a cold rolling mill Machine already dismantled weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 600 x 1,300 mm

Description: Tank capacity: 50 l Power: 2.5 HP Flow rate: 210 l/min Rotation speed: 2850 rpm Maximum. operating pressure: 8 Bar Rated voltage: 230V, 50Hz Cylinder: 47 mm Sound emission level: 91 dB Approx. Onsite Dimension. (l x w x h): 800 x 500 x 400 mm, weight approx.: 20 kg

Description: Tank capacity: 50 l Power: 2.5 HP Flow rate: 210 l/min Rotation speed: 2850 rpm Maximum. operating pressure: 8 Bar Rated voltage: 230V, 50Hz Cylinder: 47 mm Sound emission level: 91 dB Approx. Onsite Dimension. (l x w x h): 800 x 500 x 400 mm, weight approx.: 20 kg

Description: Tank capacity: 50 l Power: 2.5 HP Flow rate: 210 l/min Rotation speed: 2850 rpm Maximum. operating pressure: 8 Bar Rated voltage: 230V, 50Hz Cylinder: 47 mm Sound emission level: 91 dB Approx. Onsite Dimension. (l x w x h): 800 x 500 x 400 mm, weight approx.: 20 kg

Description: Tank capacity: 50 l Power: 2.5 HP Flow rate: 210 l/min Rotation speed: 2850 rpm Maximum. operating pressure: 8 Bar Rated voltage: 230V, 50Hz Cylinder: 47 mm Sound emission level: 91 dB Approx. Onsite Dimension. (l x w x h): 800 x 500 x 400 mm, weight approx.: 20 kg

Description: Tank capacity: 50 l Power: 2.5 HP Flow rate: 210 l/min Rotation speed: 2850 rpm Maximum. operating pressure: 8 Bar Rated voltage: 230V, 50Hz Cylinder: 47 mm Sound emission level: 91 dB Approx. Onsite Dimension. (l x w x h): 800 x 500 x 400 mm, weight approx.: 20 kg

Description: Tank capacity: 50 l Power: 2.5 HP Flow rate: 210 l/min Rotation speed: 2850 rpm Maximum. operating pressure: 8 Bar Rated voltage: 230V, 50Hz Cylinder: 47 mm Sound emission level: 91 dB Approx. Onsite Dimension. (l x w x h): 800 x 500 x 400 mm, weight approx.: 20 kg

Description: Supply voltage: 12V Power: 19W Flow rate: up to 15 l/min Outlet: 16mm Pump diameter: 38mm Approx. Onsite Dimension. (l x w x h): 150 x 100 x 100 mm, weight approx.: 1 kg

Description: Mini CPN dispenser with meter and self-priming pump Self-reflexive weapon 2 meter suction hose 4 m long reinforced hose that connects the regulator to the gun. check valve Connect 2 pieces. Gaskets and brackets Approx. Onsite Dimension. (l x w x h): 300 x 300 x 400 mm, weight approx.: 15 kg

Description: Mini CPN dispenser with meter and self-priming pump Self-reflexive weapon 2 meter suction hose 4 m long reinforced hose that connects the regulator to the gun. check valve Connect 2 pieces. Gaskets and brackets Approx. Onsite Dimension. (l x w x h): 300 x 300 x 400 mm, weight approx.: 15 kg

Description: Supply voltage: 12V Power: 19W Flow rate: up to 15 l/min Outlet: 16mm Pump diameter: 38mm Approx. Onsite Dimension. (l x w x h): 150 x 100 x 100 mm, weight approx.: 1 kg

Description: Hex socket: 8mm, 9mm, 10mm, 12mm, 14mm, 17mm Square Sockets: 5/16', 3/8', 7mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm external triangular cap 10mm square internal base Articulated button Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 2 kg

Description: Mini CPN dispenser with meter and self-priming pump Self-reflexive weapon 2 meter suction hose 4 m long reinforced hose that connects the regulator to the gun. check valve Connect 2 pieces. Gaskets and brackets Approx. Onsite Dimension. (l x w x h): 300 x 300 x 400 mm, weight approx.: 15 kg

Description: Hex socket: 8mm, 9mm, 10mm, 12mm, 14mm, 17mm Square Sockets: 5/16', 3/8', 7mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm external triangular cap 10mm square internal base Articulated button Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 2 kg

Description: Supply voltage: 12V Power: 19W Flow rate: up to 15 l/min Outlet: 16mm Pump diameter: 38mm Approx. Onsite Dimension. (l x w x h): 150 x 100 x 100 mm, weight approx.: 1 kg

Description: Hex socket: 8mm, 9mm, 10mm, 12mm, 14mm, 17mm Square Sockets: 5/16', 3/8', 7mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm external triangular cap 10mm square internal base Articulated button Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 2 kg

Recon Part Number: 1202 9316 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Immediately available refurbished gas-oil throughput caps, we also have all used ones in stock

Description: Suitable for screw compressor and refrigeration dryer system, with both filters see photo Approx. Onsite Dimension. (l x w x h): 600 x 600 x 1,600 mm, weight approx.: 50 kg

Description: With 2 filters, one type ,F 95 P and one ,F 95 M Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,800 mm, weight approx.: 80 kg

Description: SUBMERSIBLE SLURP PUMP, IP55, 2.6KW, 3000 1/MIN, 220-240/380-420V 50HZ, FLOW RATE 600 L/MIN AT 12.0M, DELIVERY HEIGHT, SUPPLY DEPTH 570MM, PIPE CONNECTION G 2 1/2, MAX. SOUND PRESSURE LEVEL 76 DB (A), WITH HARTING PLUG-IN CONNECTOR: 10-PIN DESINA, TAL901/570-MVX+227. Used in milling or grinding machines to pump around the cooling oil. Approx. Onsite Dimension. (l x w x h): 1,400 x 1,400 x 1,300 mm, weight approx.: 100 kg

Immediately available new

Description: The three squeezing machines have an extraction capacity of 400 kg/hr (for sunflower oil) and are composed of 4 worm screw extruders with an external case made of interchangeable modules in hardened steel. Each individual extruder is completely modular and allows for the identification of a single component that may be damaged in order to replace it easily and economically. These three machines require half a day per week for cleaning and inspection of consumable parts, which are located at the front, where the pelletized product comes out, and in the thrust bearings. The machine has been perfected over time to achieve maximum extraction potential (as far as sunflower seeds are concerned) and to minimize wear on the various parts. It is possible to change the order and composition of the individual rings that make up the case for the processing of other oilseeds (in this c ...

Description: Oil mist extraction Handte Air volume: 1,000Bm³/h Filter area: 0.18m² including stand 1x EURO pallet with suction (without overhang, height 1.10) Tripod: 0.65m x 0.65m x 2.0m Approx. Onsite Dimension. (l x w x h): 650 x 650 x 2,000 mm, weight approx.: 120 kg

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® Multi-Touch control Working areaSwing diameter over transverse guideway370 mmSwing diameter over guide ways700 mmTurning diameter400 mmBar diameter max.80 mmSlide 1Transverse stroke276 mmLongitudinal stroke755 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)426 NmWork spindle (left)Spindle noseA2-8 Bar diametre80 mmSpindle diametre on front bearing130 mmMain drive 2Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range- 5000 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 N ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDrive power (100% DC)9 kWSpeed max.12000 rpmDrive power (40% DC)13 kWTorque (100% DC)57 NmMax. torque83 NmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Oil- and Emulsion Mist SeparatorOil- and Emulsion Mist Separator Note: 1. Option available only for PRO version.Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Oil- and Emulsion Mist SeparatorOil- and Emulsion Mist Separator Note: 1. Option available only for PRO version.Air coolant external and internalAir coolant external and internal (through spindle centre) switchable via M-FunctionElectronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Oil- and Emulsion Mist SeparatorOil- and Emulsion Mist Separator Note: 1. Option available only for PRO version.Air coolant external and internalAir coolant external and internal (through spindle centre) switchable via M-FunctionElectronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Oil- and Emulsion Mist SeparatorOil- and Emulsion Mist Separator Note: 1. Option available only for PRO version.Air coolant external and internalAir coolant external and internal (through spindle centre) switchable via M-FunctionElectronic HandwheelExternal electronic Handwheel

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmSwing diameter over transverse guideway370 mmBar diameter max.80 mmTurning diameter400 mmSlide 1Longitudinal stroke755 mmTransverse stroke276 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)426 NmWork spindle (left)Spindle noseA2-8 Bar diametre80 mmSpindle diametre on front bearing130 mmWork spindle (right)Spindle noseA2-6 Bar diametre50 mmSpindle diametre on front bearing100 mmMain drive 2Drive power (100% DC)13 kW ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Set of additional documentationSet of additional documentation Option includes: - machine manual - control manual - parts catalogue (in paper version)