o rings used for sale

Shut-off valve for pipelines, ball valve, hydraulic valve ORSTA A 20-16 ( A20-16 ) TGL 21575 Nominal pressure: 16 MPa (160 bar) Nominal diameter: 20 mm 1x connection thread: M26 x 1,5 1x connection thread: M36 x 2.0 installation length: 150 mm used, tested ! Dimensions: 295 x 66 x 135 mm

Shut-off valve, with throttle cone, hydraulic valve ORSTA, MAW 8ND40MPa10 TGL 28048 Nominal pressure: 40 MPa ( 400 bar ) Nominal diameter: 10 mm 2x Connection thread: M18 x 1,5 Material: St38b-2 for front panel installation: Ø 24 mm used, tested ! Dimensions: 165 x 70 x 70 mm

Shut-off valve, with throttle cone, hydraulic valve ORSTA, MAW 8ND40MPa12 TGL 28048 Nominal pressure: 40 MPa ( 400 bar ) Nominal diameter: 12 mm 2x Connection thread: M20 x 1,5 Material: St38b-2 for front panel installation: Ø 24 mm used, tested ! Dimensions: 165 x 70 x 70 mm

Shut-off valve, with throttle cone, hydraulic valve ORSTA, MAW 8ND400-10 TGL 28048 Nominal pressure: 400 bar Nominal diameter: 10 mm 2x Connection thread: M18 x 1,5 Mounting length: 58 mm Material: St38b-2 used, tested ! Dimensions: 130 x 55 x 55 mm

Sheet thickness: 10,0 mm Bending length: 2000 mm Number of rolls: 3   CNC Brand: _Unknown / Other CNC Model: - 3 roll plate benderOmcca - HSL-i 10.8 MACH-ID 7691 Make: Omcca Type: HSL-i 10.8 Year: 2004

Number of colours: 6, with paternoster feeder, operational hours counter: 33,213h.

Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW

OMCA 900 Mitre Saw Sheet metal chamfering machine OMCA 900 Manufacturer: OMCA Type: 900 Year of construction: 2012 Technical Specifications Motor power: three-phase 230/400 volts, 4 kW, 50/60 Hz, 4 poles Tilt adjustment: 5 mm - 33 mm (50 mm diagonally) Bevel angle: 15° - 60° Sheet thickness: 8 mm - 50 mm Milling cutter Ø 63 mm Z 5 Cutting speed: 0 - 750 rpm Feed speed: 0 - 1 m/min Working height: 800 mm ÷ 980 mm Dimensions: 600 x 650 x H 1600 mm Weight: 175 kg Machine in excellent condition.

Oil filter, filter ORSTA BCA 10/25 ( BCA10/25 ) TGL 21541 Nominal pressure: 10 bar with overpressure monitor type A TGL 15687 New ! Dimensions: 180 x 140 x 105 mm

Key data: 500

ORMAL (DIEFFE) dowel cutter model TT500 with: - fast-moving blade D=500mm - Blade motor 7.5 hp, Volt 380 - cutting section from 40x40mm to 130x140mm - Automatic loader with transport clamp for the bars - magazine length 5 m (open at the back, can carry longer bars) - production capacity up to 45 cuts per minute of 80x80xL=80mm dowels - overall dimensions approx. 6 x 1.8 m - complete with electrical panel CE standard machine

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

Manufacturer: Olaer Parts: Euro-Hydro - Brook Compton 3 Phase Cooler Matrix Maximum Static working pressure: 21BAR Maximum dynamic working pressure: 14 BAR (Tested according to ISO/DIS 10771-1 Heat transfer allowance: +-6% Maximum fluid temperature in the cooler matrix: 120 Celsius degrees Maximum Cooling capacity: 160kW Fluid compatibility Mineral oil: HL/HLP Oil/water emulsion: HFA/HFB Water Glycol: HFC Phosfatester: HFD-R Material Cooler matrix: Aluminium Fan housing: Steel Fan blades/hub: Glass fibre reinforced polypropylene/aluminium Fan guard: Steel Other parts: Steel Surface treatment: Electrostatic powder coated 3Phase Motor Insulation class: F Rise of temperature: B Protection class: IP55 1Phase Motor Insulation class: B Rise of temperature: B Protection class: IP 44 3Phase Motor LAC 004 Rated voltage: 230/400 50/60 Hz Insulation class: ...

Description: Including the tools located on the tool turrets, a 3-jaw chuck, a chip conveyor, foot switch Drehlänge: 800 mm, serial number: ^12013, control: FANUC SERIES O-TT, toolchanger positions: 2 x 8, number of controlled axes: 2, spindle bore: 60 mm, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 2,300 x 2,300 mm

SPECIFICATIONS: Saw blade diameter mm: 450 Cutting capacity mm: 3000 x 275 (proportional thickness) Installed power: 6.2 KW Auto Pusher: Yes NC Feed Stop 02 Loading and unloading tables mm: 4000 - 2000 Electro-pneumatic operation

Office and cantine inventory consisting of: (3x) tables, dimensions: 1000 mm x 600 mm x 750 mm and (8x) tables with seats, dimensions: 1200 mm x 1460 mm x 750 mm.

Description: Including DURACRAFT fan Approx. Onsite Dimension. (l x w x h): 400 x 450 x 800 mm, weight approx.: 40 kg

Description: Hydraulic output up to 250 l/h depending on setting Foreign oil discharge 35 l/h Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,400 mm, weight approx.: 60 kg

Filter Seitz Orion, diversion chamber 40 x 40 More then 300 machines new and second hand on our seema .de

Reverse osmose filter system, diameter pipe: 170 mm, total dimensions: 3050 mm x 1200 mm x 1750 mm.

Description: Fabric/plastic/metal, color: blue/black, with 2 height-adjustable armrests Location: A-040 Vienna Collection: Thursday, April 4th 2024, provided payment deadline is met Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,600 mm, weight approx.: 50 kg

Oven OMIA SECOMAT V-10 Maxi temperature: 160° Internal dimensions: 1000 x 1000 x 1000 mm Equipped with 1 small trolley Voltage: 380 V Width: 2000 mm Depth: 1500 mm Total height: 2000 mm Weight: approx 1 T MACHINE IN VERY GOOD CONDITION

Manufacturer : CAM Model: AP Year : 2008 Type : Intermittent motion overwrapper Materials: Polipropilene, PVC, cellophane. Feeding: automatic or manual. Mechanical speed: 31 - 100 strokes / minute. Format : Length (A): 35 - 150 mm Height (B): 15 - 80 mm Width (C): 60 - 300 mm Chuck: ? 70 - 76 mm Roll: max. ? 320 mm Width: 100 - 400 mm

Full Automatic Form, Fill and Seal Packaging Machine OPAK MAKİNE QZ 1000 MAXI Packaging Product: Processed cheese + Bread Sticks Grissini Bottom Foil Material: PS, PET + PE, PVC + PE (300 mm) Top Foil Material: ALU+PE (280mm) Filling: Automatic Vacuum: 205 m3 DVP Italy (0.1 mBar) Capacity: 8-10 cycle/min Machine Dimensions: 8000x1400x2100 mm; Monoblock Chassis/ Independent Stations Chassis Material: AISI 304 Stainless Steel Mould Material: 7075 ve 5083 Aluminium PLC: OMRON (full-color touchscreen panel) (JAPAN) Pneumatic: FESTO (GERMANY) Electric: Telemecanique™ Schneider Electric Security: Emergency Stop button on Operator Panel and Chassis, Automatic stop switches for low air pressure. Circuit voltage: 380 V, 3 phases, 50 Hz Pressurized Air Requirement: 6 - 8 bar, Max 1600 L/min (Clean and dry) Chilled Water Requirement: 10 - 16°C refined from minerals, Neutral pH, ...

Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0

Glue application machine Brand: OMMA Type: FSC 600 New machine Technical details: Useful working width mm 600 Maximum working thickness mm 90 Working speed mt/min 19 Height of working level mm 905 Spreading rollers Ø mm 185 Standard grooving lines/inch 14 Installed power kW 0.37 Colour Ral 7035 Command side (compared to working direction) Right Standard voltage v 400/50/3 Technical equipment: - Spreading rubber rollers coated with grinded surface. - Thickness graduate indicator. - Top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation. - Parallelism regulation between spreading rollers. - Rollers protection with security plate and foot control in front of the machine that stop immediately the machine if activate. - Security front foot barrier. - Steel zinc collecting tank of the cleaning water. - E ...

AUTOMATIC GLUE SPREADER type OMMA OPEN 1400 year 2003 CE mark : YES technical details : useful working width mm. 1400 max. working thickness mm. 80 working speed : 18 mt/min. spreading rollers diam.mm.250 dosing rollers diam.mm.185 installed power kw 1,6 weight kgs. 1200 volt. 380/50 standard details : - separate electric box - automatic cleaning device for spreading rollers - pressure-free side seals with antifriction flanges to avoid any overheating when long shifts and high working speeds are involved too - careful and sensitive adjustment of the dosing rollers by geardrives - large diameter spreading and dosing rollers - high uniformity of the spreading on full working width - separate gearmotor - collecting tank of the cleaning water - electric plant realized in accordance with high standards with low voltage on secondary circuits, all electric components in ...

STRIP WIDTH: MAX. 160 MM; THICKNESS RANGE: 0.5 - 3.0 MM, TUBE OD.: 12 - 50.8 MM, TUBE LENGTH: 3-6 M, TIG-TRICATHODE + LASER ROFIN SINAR 6 KW

Stock number: U2257 Used stainless steel filter press by Seitz (Germany) type Orion model OF100/250. Filter press has 41 plates with dimensions 1000 mm x 1000 mm + 41 frames with depth 40 mm and 2 end plates. It gives surface of filtration 82 m2 and 1640 l cake volume. Filter press is opened and closed hydraulically by piston and hydraulic device driven by 2.2 kW el. motor. Below the plates there is mounted stainless steel collection tank with central screw conveyer. Press is equipped with control panel, pipes, two manometers, rubber sealings and screw type pump, driving the screw inside the collection tank. Last time press had been working in beer production.

Opti B17Pro Bench drilling machine 5 speeds Drilling capacity in steel 16 mm Motor 500W 230V Spindle retainer MK2 Drilling table Tilt/Swivel +-45° / 360° Net weight: 39kg Table length: 235 mm Table width: 220 mm G & pieces 3003171SE

Pillars - or drilling machines Smoothness thanks to polished splined hubs High concentricity by hardened and ground spindle Large speed range Heavy, solid casting Drilling depth stop adjustable with millimetre scale Low maintenance gearbox with grease lubrication Electrical connection: 400 V / 3 pH 50 Hz Engine power: 1,1 / 1,5 kW Drilling capacity in steel: Diameter 28 mm Spindle retainer: MK 3 Projection/Quill stroke: 260 mm / 127 mm Spindle speeds/levels: 75 - 2900 min-1/8 Table length x width / T-slots: 376 x 394 mm / 14 mm Column diameter: 92 mm Dimensions Lxwxh: 670 x 550 x 2, 080mm Net weight: 184 kg G & pieces 3034230

OSTAS RING BENDING MACHINE TYPE OPK-42 -Asdiameter 50 mm -Draait right en linksom -Horizon eel/verticaal te sump -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS RING BENDING MACHINE TYPE OPK-32 -Shaft diameter 30 mm -Hardened special steel shafts -1 set of hardened rolls -Bottom rollers are driven -Foot pedal -Horizontal and vertical work -Manual -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

CHP 60kW of electric power with approx. 108kW of thermal performance Compact system with enclosure and Cabinet mounted on the system. incl. power factor correction and emergency cooler.

; operational as of week 33

Manufacturer: SAF Type: Oxytome 30 Working range: 6000 x 3000 mm Technology: Plasma oxyfuel Built: 2001 Equipment Hardware: 1x SAF Nertajet HP 125 Only very little use 2x SAF Nertajet HP 300 connected in series 1x autogen burner Without fuel cutting tables without filter system Div. Wear parts equipment Control & Software: DIGISAF 500 Machine control Other information: System is available from week 33 cutting performance see PDF assembly and commissioning on request; ready for use from KW 33

OSTAS RING BENDING MACHINE TYPE OPK-45 -Asdiameter 50 mm -Bovenste wals wordt verplaatst hydraulically -Digital uitlezing -Horizon eel/verticaal te sump -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS ROUND BENDING MACHINE TYPE ORM 1070 x 130 -Capaciteit 1070 x 5 mm -Electrically adjustable achterrol -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Documentatie -400V PRICE IS plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

American stove Heartland 6120EC original Stove ran only a short time because of moving to new apartment, it could not mitnehemen, me is unfortunately necessary to separate. Is stored Electric 400V hobs, oven and keep warm compartment New price at 7500 € Appointment for viewing by phone or by mail. When the load is helped. Private sale no returns

OSTAS SWIVEL BENDING MACHINE TYPE OCM 2060-2 -Capaciteit 2040 x 1.5 mm -Bovenmes in segments -Max buighoek 135 ° PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS ROUND BENDING MACHINE TYPE ORM 2070 x 140 -Capaciteit 2070 x 4 mm -Electrically adjustable achterrol -Electrically adjustable onderrol (materiaal klemming) -Digital uitlezing voor beweging achterrol -Digital uitlezing voor beweging onderrol (materiaal klemming) -Roll Harde -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS ROUND BENDING MACHINE TYPE ORM 2070 x 140 -Capaciteit 2070 x 4 mm -Electrically adjustable achterrol -Electrically adjustable onderrol (materiaal klemming) -Digital uitlezing voor beweging achterrol -Digital uitlezing voor beweging onderrol (materiaal klemming) -Roll Harde -Walsen Conisch 7yzcle03l -Bovenrol Wegdraaibare -Remmotor -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

CHP with John Deere gas engine and 70 kW of electrical power New exhaust gas turbocharger Control AMG 2 with leanox control Synchronous Generator Stamford 70kW Complete with frame,sound hood Automatic oil refilling with internal silencer and exhaust heat exchanger Operating hours approx.42,000 Suitable for biogas and natural gas

OSTAS RING BENDING MACHINE OPK-125 TYPE -Shaft diameter 120 mm -Hydraulic -Hardened special steel shafts -1 set of hardened rolls -All three rolls are driven -Two digital displays -Foot pedal -Horizontal and vertical work -Manual -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS RING BENDING MACHINE TYPE OPK-105 -Shaft diameter 100 mm -Hydraulic -Hardened special steel shafts -1 set of hardened rolls -All three rolls are driven -Two digital displays -Foot pedal -Horizontal and vertical work -Manual -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS PLATE SHEAR TYPE RGM 1050 x 6 -Capaciteit 1050 x 6 mm -Achteraanslag electric -Voetbediening -Remmotor -Plaathouders -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS ROUND BENDING MACHINE TYPE ORM 1570 x 140 -Capaciteit 1570 x 4.5 mm -Electrically adjustable achterrol -Electrically adjustable onderrol (materiaal klemming) -Digital uitlezing voor beweging achterrol -Digital uitlezing voor beweging onderrol (materiaal klemming) -Roll Harde -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km von der Deutschen Grenze))

OSTAS ROUND BENDING MACHINE TYPE ORM 1270 x 130 -Capaciteit 1270 x 4.5 mm -Electrically adjustable achterrol -Electrically adjustable onderrol (materiaal klemming) -Digital uitlezing voor beweging achterrol -Digital uitlezing voor beweging onderrol (materiaal klemming) -Roll Harde -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS ROUND BENDING MACHINE TYPE ORM 1070 x 130 -Capaciteit 1070 x 5 mm -Electrically adjustable achterrol -Electrically adjustable onderrol (materiaal klemming) -Digital uitlezing voor beweging achterrol -Digital uitlezing voor beweging onderrol (materiaal klemming) -Roll Harde -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)