We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,095 used machines on RESALE, but how to find them? Machine Search
used
T-slot worktable made of cast ironDates:Dimensions: 2000 x 1300 x 500 mmWith- 6 transverse T-slots 50/32 mmvery little used, from an operational resolution,in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Inclinable T-slot clamping table made of cast ironTechnical specifications:Table size: 405 x 380 mmTable height: 220 mmCan be tilted up to: 90 °Table thickness: 40 mmNumber of T-slots: 4 piecesSize of the T-slots: 14/12 mmDistance between the T-slots: 85 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
T-slot clamping angleTechnical specifications:Dimensions approx: 1500 x 1300 mmWith- 7 horizontal T-slotsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
T-slot worktable made of cast iron (formerly press table)Length: 1520 mmWidth: 850 mmHeight: 980 mmWith- 6 T-slotsxa0xa0 Transverse Lg. 850 mmxa0xa0 Groove size 38/22 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
T-slot clamping plate made of cast ironDimensions:Length: 1600 mmWidth: 1200 mmHeight: 200 mmWeight approx: 1400kgWith- 7 transverse T-slots 26/48xa0xa0 Distance 100/200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
T-slot mounting plateTechnical specifications:Length: 4000 mmWidth: 2500 mmHeight: 300 mmWeight approx: 8.0 tWith- 14 x T-slot in the longitudinal directionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Rectangular T-groove clamping plate made of cast iron (hollow body)Technical specifications:Outside dimensions approx: 700 x 1050 x 350 mmNumber of T-slots horizontal: 6Size of the T-slots: 20/34 mmWall thickness: 60 mmVertical elevation each: 3 clamping slotsDistance of T-slots: 150 mmWith- 2 suspension lugsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Cast T-slot platenTechnical specifications:Dimensions approx. L x W x H: 2010 x 1080 x 220 mmThickness: 35 mmRibbing: 185 mmNumber of T-slots: 3Dimensions of the T-slots: 60/36 mmGroove distance: 275 mmNumber of mounting holes: 8Size of the mounting holes: 155 mmWeight approx: 1140 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
T-slot mounting bracket made of cast ironTechnical specifications:Clamping area: 700 x 550 mmFootprint: 500 x 550 mmMaterial thickness: 60 mmWith- 6 horiz. T-slotslittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
T-slot clamping plate, ribbedTechnical specifications:Length: 3000 mmWidth: 1000 mmHeight: 190 mm:T-slots lengthways: 4 piecesWeight approx: 2 tWith- ribbed- Ring eyelets for transportused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Measuring plate with T-slot for screwing on a measuring columnon baseTechnical specifications:Length: 770 mmWidth: 760 mmPlate height: 40 mmPlate height with ribs: 200 mmon baseWith- 1 T-slot:usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
T-slot clamping plate, ribbedTechnical specifications:Dimensions L x W x H approx.: 3000 x 1435 x 200 mmWeight approx.: 2500 kg:with- 4 adjustable feet- 4 T-slots- mounting holesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
T-slot platen made of cast ironTechnical specifications:Length: 1200 mmWidth: 1000 mmSolid thickness: 60 mmRibbed thickness: 150 mmWith- 6 longitudinal T-slots 26/16 mm- baseused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Connected load: 300VA, width: 1110mm, height: 2190mm.
used
Connected load: 250kVA, weight: 285kg.
used
Connected load: 300VA, weight: 170kg.
used
Connected load: 250VA, weight: 180kg, with 500mm-conveyor.
used
Connected load: 250VA, weight: 275kg.
used
Circuit board thickness: 0.6-1.6mm, weight: 245kg.
used
Voltage: 230V, weight: 35kg.
used
Voltage: 230V, weight: 40kg.
used
Connected load: 254VA, weight: 220kg.
used
Length: 500mm, weight: 50kg.
used
Length: 2000mm, weight: 110kg.
used
Product thickness: 0.6-1.6mm, weight: 50kg.
used
Machines that roast coffee from 1kg to 500kg at a time are produced. Capaccity of EKO 1K is 1,5 kg per batch.EKO 1K Coffee roasting machine of heating is electric.The coffee roasting machine is made by welding St 37 welded material. Our coffee roasting machines • Control sample spoon and sample viewing glass • Independent of cyclone dust collectors • Roasting and cooling at the same time • High capacity cooling system • It consists of a temperature control system.
used
Machines that roast coffee from 1kg to 500kg at a time are produced. Capaccity of EKO 5K is 5 kg per batch.The coffee roasting machine is made by welding St 37 welded material. Our coffee roasting machines • Control sample spoon and sample viewing glass • Independent of cyclone dust collectors • Roasting and cooling at the same time • High capacity cooling system • It consists of a temperature control system. As fuel Gas (compressed ore natural gas) and DIESEL can be used. Also electric can be ordered for heating .
used
Machines that roast coffee from 1kg to 500kg at a time are produced. Capaccity of EKO 20K is 20 kg per batch.The coffee roasting machine is made by welding St 37 welded material. Our coffee roasting machines • Control sample spoon and sample viewing glass • Independent of cyclone dust collectors • Roasting and cooling at the same time • High capacity cooling system • It consists of a temperature control system. As fuel Gas (compressed ore natural gas) and DIESEL can be used. Also electric can be ordered for heating .
used
Welding edge former, edge former, edge chamfering machine TRUMPF chamfers of steel plates for weld seam preparation type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10mm Bevel angle: 30 Power: 2000 Watt Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30 bevel angles - regrindable butt steel for high tool utilization - several impact steels - Support plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thicknesses For bevelling straight and curved edges with at least 40 mm radius. For bevelling edges on flat and curved workpieces as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg; used
used
Wire diameter: 16mm, number of stations: 5, length: 6700mm, width: 3800mm, height: 3050mm, including sound-proof cabin, straightener, chain hoist, sorting trough, dosing machine, oil mist separator and additional accessories.
used
thread diamter M8-M16 number of dies 5 number of stations (incl. cut off) 6 max. width across flats 24 mm output pieces/min 120 cutting length 19 mm press power 180 t
used
diameter range 10 mm number of dies 5 number of stations (incl. cut off) 6 max. width acros flats 13mm output pieces/min 150-200 cutting length 17 mm
used
diameter range 64 mm max. width across flats 56 mm max. outside dia. of round pieces 64 mm bar dia. 18-40 mm cutting length 20-72 mm output - pieces/min 140 number of forming stations 3 press power 230 t
used
Powerful multi-tiered nut grater for all types of nuts (almonds, walnuts, hazelnuts, cashews, macadamias, peanuts, pistachios) and some seeds (pumpkin seeds, sunflower seeds). Capacity depending on the nut and sieve size of the end product 350 – 750kg/hour. Sieves for: flour (0 – 1 or 0 – 2 mm), chopped (2 – 4, 4 – 6, 4 – 8 mm) The system is in very good and continuously serviced condition. The original purchase was in 2008, addition/addition in 2009. Original price was around 300,000 euros.
used
A vacuum former from the US company The Channel Letter Bender. The machine was bought in 2017 and has operated over the years around 30 hours, so it is practically brand new and is well maintained. All the technical specifications are in the PDF. Shipping dimensions 1650 mm x 2400 mm x 2400 mm ( L x W x H ) ( 65 inch x 95 inch x 95 inch ) weight 700 kg ( 1543 lbs ) Operating area 3000 mm x 3500 mm ( 118 inch x 137 inch )
used
Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 118 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP
used
Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...
all stainless steel die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1 litre speed up to ± 50 strokes / minute total power 7,67 kW air consumption ± 300 L / min. - 6 bar dimensions (l x w x h) : 2.650 x 800 x 2.100 mm weight 940 kg
used
wire diameter range: 2,5 - 6,0 mm wire feeding length: unlimited wire feeding speed: up to 36 mtr./min angle of bending: 0 - 340°; ready for operation
used
Dough pre-portioner 3 rolls dough strip former from Rijkaart with 45cm tape and roll width with large hopper.Machine is mobile on rollers, 400 volt connection.Machine is immediately available in the warehouse. 1x Roller 45cm wide large funnel on large rolls with a set-up completely made of stainless steel
new
Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at th ...
used
Folding former make RAS type 22.15Masch. -No: 35/3 built in 1971Profile height max.: 20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max.: 1.25 mmWorking speed approx: 14 m / minPower requirement: 2.2 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx: 326 kgWith- Rollers for Pitsburghfold 1mm- Sliding fold 0,5 - 1,5 mm width 29 mm- 7 pairs of rollsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Universal folder former make RAS type 22.15Fabr. -No: 155/6 year 1982Profile height max.: 20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max.: 0.5 - 1.25 mmSheet length: 300 mm - optionalWorking speed approx: 14 - 17 m / minPower requirement: 2.2 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx: 326 kgWith- Snap- Cam standing seamused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute total power 8 kW air consumption ± 300 L / min. mobile with mould trolley variable speed 3x400v 50hz with bridge breaker dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg PLC control
used
Universal - folder former make RAS type 22.15Built in 1970Profile height max.:20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max .: 1.5 mmProfiling speed approx. 14 m / minPower requirement: 3 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx. 300 kgWith- Profile rolls for Pittsburg fold and standing seamused, from an operating resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Universal folder former make RAS type 22.10Masch. -No: 353/4 built in 1982for sheet thickness up to: 1.5 mmProfiling speed: 6.0 and 12 m / min.Number of reel stations: 7Drive power: 2.2 / 3.4 kWWeight approx: 490 kgOutside dimensions approx : 2160 x 710 x 1010 mmWith- 2 set of profiling rolls- Footswitch- larger table with stopsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Universal folder former make RAS type 22.15Mash. -No: 163/2Profile height max.:20 mmSheet thickness max .: 1.5 mmDrive power: 2.2 kWExternal dimensions: 1140 x 790 x 1210 mmWeight approx. 300 kgWith- Set of rollers for Eckfalz with Falzöffnerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hopper capacity: 80l, starting width: 200-230mm, connected load: 1kW, length: 4500mm, width: 1100mm, height: 1733mm, weight: 1.1t.
used
: gebraucht : 9697 : prompt, Zwischenverkauf v : USA : 2800 € : 1 : 0.8 - 1.25 mm : 2.2 kW : 1500 mm : 620 mm : 1150 mm : 284 kg 1 set of rollers for Pittsburgh fold 1 set of rollers for long fold Mounted on wheels no User manual DOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Max. sheet thickness: 1.5 mm steel 2 continuous stations (see video) Weight: approx. 500 kg