We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,585 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Capsuling machine NORTAN 12 T for champagne Model Prisma 120 S Year: 1994 Counterclockwise Suitable for champagne capsules Long range storage Check presence caps after distribution Safety protections
used
Screening machine Nordberg Bergeaud 21/50-3 Brand: Nordberg Bergeaud Type: CVB Screen area: length 5000 mm, width 2100 mm - 3 deckers Upper deck: screen opening [] 35 mm Middle deck: screen opening [] 25 mm Lower deck: screen opening [] 15 mm Drive: 18.5 kW electric motor Without springs.
used
Capsuling machine NORTAN mod. UNICAP 35 Year: 1994. Speed: 2.500 bph. Direction: Clockwise. Single head for PVC capsules. Capsules distribution by plateau. Safety protections.
used
Screening machine Nordberg-Dragon Brand: Nordberg-Dragon Type: 25/60-3.5 Screen area: 6000 mm x 2500 mm – 3.5 decker Upper deck: screen opening [] 30 mm Middle deck: screen opening [] 17 mm Middle deck: screen opening [] 10 mm Lower deck: screen opening [] 5 mm Drive: 30 kW electric motor
used
Capsuling machine NORTAN – UNICAP 35 Year: 1993. Speed: 2.500 bph. Direction: Clockwise. Capsules distribution with plateau system. Single thermal head for PVC capsules. Safety protections.
used
Nordberg feed hopper with vibrating channel Brand: Nordberg Dim. Bunker : 3000 x 3100 x 2000 mm Dim. outlet bunker: 2500 x 1200 x 1500 mm. Incl. steel construction Dim. feed channel: length 6000 mm - width 1400 mm. Drive: 2 vibration motors of 7.5 kW each Incl. steel construction Total weight: 28 tons.
used
Capsuling machine NORTAN 12+12 champagne/PVC Year: 1992 Speed: 15.000 bph for PVC capsules 10.000 bph for champagne capsules Direction: Counterclockwsie Plateau capsules distribution. Safety protections.
used
Capsuling machine NORTAN – UNICAP 35 Year: 1996. Speed: 2.500 bph for PVC capsules 800 bph for polylaminate capsules. Direction: Clockwise. Model: UNICAP 35. Plateau capsules distribution. Safety protections.
used
Capsuling machine NORTAN – AURORA Year: 1989. Speed: 6.000 bph. Direction: Clockwise. Model: Aurora 4. 8 heads for polylaminate capsules. Safety protections.
used
Capsuling machine NORTAN – SPUMANTE Year: 1991 Speed: 1.000 bph Direction: Clockwise Single capping head Plateau capsules distribution Safety protections
used
Capsuling machine NORTAN 4+4 Year: 1999 Speed: 3.000 bph polylaminate 6.000 bph pvc Direction: Clockwise 4 heads pvc 4 heads polylaminate Plateau capsules storage. Safety protections.
used
Capsuling machine NORTAN PVC | PRISMA 40T Year: 2002 Speed: 6.000 bph Direction: Clockwise 4 heads for pvc capsules Plateau capsules distribution Safety protections
used
Capsuling machine NORTAN for PVC and Champagne Year 1992 Clockwise direction 6 thermal heads for PVC capsules 6 heads for champagne capsules (These heads don’t make the folds, but just iron the capsule on the bottle) Capsules’ storage by plateau Many bottles equipment included Safety Protections
used
Capsuling machine NORTAN 4.4 Speed: Pvc 4.000 bph Champagne: 3.000 bph Direction: Clockwise 4 head for pvc capsules 4 heads for champagne capsules Plateau capsules storage Safety protections
used
Capsuling machine NORTAN mod. PRISMA 8+8+8 Speed: 12.000 bph on pvc capsules 8.000 bph on champagne capsules 7.000 bph on polylaminate capsules Year: 2003 Direction: Clockwise Model: PRISMA 8-8-8 8 ruller heads for polylaminate capsules. 8 thermal heads for pvc capsules. 8 heads for champagne heads. Long autonomy capsule distribution. Safety protections.
used
Nobs Slitting Line Shaft diameter 80 mm Shaft length 500mm Thickness: 0.10 - 1.20 mm can cut 6mm width Cuts maximum width 450mm Knife: 100 pieces of German production SPACE RINGS: AVAILABLE RUBBERS: AVAILABLE + - TOLERANCE ADJUSTABLE MAKES PRECISION CUTTING LINE:FULL AUTOMATION
used
Capsuling machine NORTAN UNICAP 35 – Champagne Year: 1995 Speed: 1.000 bph. Direction: Clockwise Plateau capsules distributor. Replacement head for PVC capsules (3.000 bph) Many bottle formats available. Safety protections.
used
Capsuling machine NORTAN | AURORA 5 Year: 2002 Speed: 4.000 bph Direction: Counterclockwise 5 heads | polylaminate capsules Machine without distributor Safety protections
used
Capsuling machine 4+4 – NORTAN Year: 2003 Speed: Pvc: 6.000 bph Champagne: 4.000 bph Direction: Clockwise 4 heads pvc capsules. 4 heads for champagne capsules. Plateau capsules storage. Safety protections.
used
Capsuling machine NORTAN 4.4 Year: 1990 about Speed: 3.000 bph | polylaminate 6.000 bph | pvc Direction: Clockwise 4 heads for pvc capsules 4 heads for polylaminate capsules Plateau capsules distributions Safety protections.
used
Shrink machine Novopac – model CD2 070 M Year: 2002 Shrink machine by lap seal method Suitable for pack by 6 bottles (2X3)
used
Shrink machine NOVOPAC Year: 2017 Can only do formats with 2 files (2x2, 3x2, etc.) Maximum container diameter 105 mm Maximum container height 250 mm Maximum bundle length 400 mm Speed: 15 bundles per minute Sealing bar Only film Formats programmable from the panel
used
Shrink wrapper NOVOPAC – Sealing bar closing system Year: 2000 Model: ME 070 M Speed: 10 ppm Semiautomatic Sealing bar Safety protections.
used
Semiautomatic shrink wrapper – NOVOPAC Year: 2001 Speed: 10 ppm Model: VE 070 Safety protections
used
Description with underbelt drive Easy and quick manual adjustment of height and width for consistent package sizes Gap-free bonding of upper and lower tabs Folding carton width 130-520mm Folding carton length 150 mm to endless Folding carton height 100-520 mm Inlet height adjustable from 650-750 mm Power up to 30 packages min (depending on package length) Automatic conveyor belt shutdown Set bandwidth 50 mm
used
Wraparound NOVOPAC | 2006 Year: 2006 Speed: 27 cycles / minute Model: VF 250 WR/SPECIAL Workable formats: 6/12 Preo Gluer Safety protections
used
We have available in our stock 2 units Wartsila Nohab WN 12V25 complete diesel engines 2760 Kw at 900 RPM Please contact us at: infofin-marine.com
used
Triplex solventless Laminator, The machines of 2018 are like new. Only about 200 hours Matrial for lamination : PP, Bopp, Pet ,laminates ,LDPE, LLDPE. web width =1530 mm Max lamination width = 1515 mm, Min. film width = 750 mm, Min. film width with extensions = 550 mm, diameter unwinder = 1000 mm, sleeve 76 / 152 mm, diameter rewinder = 1200 mm, sleeve 152 mm Speed = 450 m/min, Accessories: The machine has many accessories such as 2 mixing plants World Mixer SL 1 Cleaner SL
used
Capacity: 400 l Heating: gas , 36 kW Outside dimensions 94 x 130 x 122 cm (HxWxD) Inside dimensions 48x110x80 cm (HxWxD) Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water
used
Normpack adhesive roll dispenser Two dispensers for installation position bottom / top Roll width 50mm
used
ID3208 Unimog 405/12 year/Year of construction 2000 10360 hours/hours – 71.100 km Unimog with Nordmeyer DSB 2/6 drilling rig, auger pump, overhauled in 2020, maximum crown load 100 kN, feed 60 kN, drilling cable winch 19 kN, power flushing head 7 kNm, crushing device 11 kNm, cable impact device (cable pulling force 30 kN, drilling load 5 kN, stroke 400 mm) Unimog with Nordmeyer DSB 2/6 drilling rig, screw pump, overhauled in 2020, maximum crown load 100 kN, feed 60 kN, drill cable winch 19 kN, power rinsing head 7 kNm, crushing device 11 kNm, rope impact device (rope pulling force 30 kN, drilling load 5 kN, stroke 400 mm)
used
used
Nordson Problue 4, Maximum temperature (°C): 230°C , Elec: 240 V / 50 Hz / 26 A , Dimensions (mm): 520 X 340 H 510
used
Nordson Problue 7, Dimensions (mm): 580 X 350 H 500, Maximum temperature (°C): 230°C , Elec: 240 V / 50 Hz / 27 A
used
Metalbud Nowicki’s KN-200 cutter is ideal for producing all types of meat stuffing. Ideally suited for medium-sized companies. The cutter can be used for production in the candy, vegetable or fish industry. Its advantages are especially: stainless steel construction grinding the stuffing in the whole bowl high productivity reliability regulation of cutting speed product temperature measurement lubrication system easy loading and unloading option of mixing and grinding stuffing programming of more than 40 technological programs hydraulic loading Specification : Type : KN-200 Bowl capacity : 200l Cutting speed (rpm): 200÷4800 Mixing speed (rpm) : (-100)÷(-300) Dimensions: L: 2820 mm x W: 2550 mm H: 2080mm Weight : 3600 kg
used
Material clamp, material gripper, load clamp Support clamp, lifting clamp , block pliers Manufacturer: NORDGREIF Type 7548 Year of construction: 1997 Payload: 500 kg Gripping distance: 280 to 420 mm - Width adjustment via trapezoidal thread with hand crank - Rubber coating on the gripping surfaces - for crane operation - with CE marking Net weight: 50 kg good condition; used
used
Combi with 11.1.073 Novopac Shrink tunnel Remaining: 3 parts Chassis number: 4395905 Weight: 1,0 tons Power: 4 kW Air pressure: 7 bar L x w x h first part: 2600 x 1700 x 2000 L x w x h second part: 3200 x 2400 x 1700 L x w x h third part: 1775 x 3300 x 1500 Working height: 85 cm. Transport size L x W x H: 2,6 x 1,7 x 2,0 + 3,2 x 2,4 x 1,7 + 1,775 x 3,3 x 1,5 Min.-max. glass thickness: Max 300 mm Min.-max glass size: Max 1460 mm width Condition machine : Repaired after malfunction Control type: Automatic Electric. Connection: 400V Documentation: Available Instructions: Available Electric diagram: Available Parts list: No Remaining: Combi with no. 23073 Photos/film available: Photo's available
used
THREE HHS HOT GLUE SYSTEMS to install on any folder gluer - from 1 to 4 glue points- years 2005/2010- Programmation- without guns- Price: 1.000 euro each LOT. NORDSON HOT GLUE SYSTEM MODEL 2035 with one spray gun included – 4 exits- PRICE: 1.000 euro LOT.
used
Used Metalbud Nowicki vacuum tumbler with a capacity of 3600l with a cooling system is a device that provides excellent performance of the massaging process. The machine has an insulated cooling jacket around the perimeter of the drum and an external cooling unit (food-grade glycol refrigerant). The device gives the possibility to work with external central cooling systems. The set includes the Metalbud Nowicki MA 3600-PSCH massager and the Metalbud Nowicki ZCH-3 cooling unit Dimensions of the cooling unit: L: 1300 x W: 750 x H: 1250mm Weight: 170kg Manufacturer: Metalbud Nowicki Model: MA 3600-PSCH Height: 2050 mm Width: 1800 mm Length: 4020 mm Weight: 2250 kg Capacity: 3600 l Electricity supply: 400V 50Hz 3N Total power: 7.2 kW
used
Key data: 700 °C, 2400 mm, 6500 mm
1 piece gas-fired chamber furnace with air circulation and bogie hearth Type: KLWg 220/180/650 for unsupervised operation for three-phase three-phase current 400 volts/N, 50 Hz. for temperatures up to max. 700°C for natural gas "H" External oven dimensions approx. Width in mm: 3400 Width with control cabinet in mm: 3800 Height in mm: 3200 Length with inserted. Bogie hearth in mm: 8000 Length with fed. Bogie hearth in mm: 15500 clear interior dimensions approx. Width in mm: 2400 Height over beams in mm: 1800 Length in mm: 6500 Volume in m³: 25,7 Batch dimensions max. Width in mm: 2000 Height in mm: 1500 Length in mm: 6100 Weight max. in kg: 20000 Connected loads approx. Number of rule groups: 4 Number of burners: 8 Total burner power in kW: 720 Burner air blower in kW: 5.5 Circulating motor in kW: 22 Number of circulating motors: 4 Bogie hearth d ...
used
For sale is a NOVAPAC 75 M with laminar airflow system which was completely overhauled by NOVAPAC. Format is a 500 gram cup which is closed with a circuit board. In addition to the UV cups and blank disinfection using UV light, NOVAPAC added a laminar airflow system to keep the filling area clean. Price is a matter of negotiation and the system can currently still be viewed at the customer's premises. A NOVAPAC 75 M with laminar airflow system is being sold, which was completely overhauled by NOVAPAC. The format is a 500 gram cup that is closed with a circuit board. In addition to the UV cup and circuit board disinfection using UV light, NOVAPAC added a laminar airflow system to keep the filling area clean. The price is a matter of negotiation and the system can currently still be viewed at the customer's.
used
Used Shrink Wrapper Novopack 15 cps [...for more information send your inquiry to the seller.] refno: FA01
used
Description Hydraulic Two-shaft Shredder Cutting chamer 1300 x 1036 Hydraulic unit Control panel
used
Description Water thermoregulator Max temperature: 95°C Heating power: 9 Kw Pump power: 0.55 Kw Pump flow rate: 70 L/min Tank capacity: 9 L
used
Description Water / glycol mixing tank Nova frigo Capacity: 400 Lt Calpeda CM 22 / 1E 220V 50Hz 0.5A pump flow rate: 1.5 / 6.6 m3 / h
used
Description Termorregulador de agua Temperatura máxima: 90 °C Potencia de calefacción: 9 Kw Potencia de la bomba: 0,75 Kw Caudal de la bomba: 40 L/min
used
Description Water / glycol mixing tank Nova frigo Capacity: 400 Lt Calpeda CM 22 / 1E 220V 50Hz 0.5A pump flow rate: 1.5 / 6.6 m3 / h
used
weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm
used