nc used for sale

Type of control: NC4 Closing force: 420T Opening stroke: 710 mm Between columns: 870 x 710 mm Tray dimensions: 1200 x 1100 mm Mini/maxi mould: 380/820 mm Max gap between trays: 1530 mm Injection: Screw diameter: 70 mm Screw length: 20D cm3: 1212 Bars: 1877 General: Motor power: 45 kW Heating power: 31 kw Closing weight: 18T Options: Cores: 2 Robot interface: yes Bi metal: yes Others: wittmann robot

Type of control: NC4 Closing force: 50 T Opening stroke: 260 mm Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini/maxi mould: 150/350 mm Max gap between trays: 610 mm Injection: Screw diameter: 30 mm Screw length: 20D cm3: 74 Bars: 1400 General: Motor power: 20 kW Heating power: 5 kw Closing weight: Injection weight: 3.3 tons Dimensions length: 4.00 m Dimensions width: 1.20 m Dimensions height: 1.80 m Options: Cores: NO Bi metal: YES

Machine: DEMAG 200T BI MAT 610H / 120 BI MAT Year: 2000 Control type: NC4 Number of hours: 31 500H Closing Closing force: 200T Opening stroke: 500 mm Between columns: 610 x 610 mm Tray dimensions: 830 X 830 mm Mini / maxi mold: 310/660 mm Max distance between plates: 1235 mm Injection: Screw diameter: 45/25 mm Screw length: 20 D cm3: 322/61 Bars: 1900/2006 General: Motor power: 30KW Heating power: 13KW Closing weight: 10T1 Dimensions length: 5M70 Dimensions width: 1M70 Dimensions height: 2M10 Options: Cores: 2 Robot interface: YES Bi metal: YES Others: turntable, 2 blow guns

Machine: DEMAG 50 T INTELEC Year: 2007 Control type: NC4 Number of hours: 25000H Closing Closing force: 50 T Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini / maxi mold: 150/350 mm Max distance between plates: 410 mm Injection: Screw diameter: 30 mm cm3: 74 Bars: 1400 General: Motor power: 20 kw Heating power: 5 kw Injection weight: 3.3 tonnes Dimensions length: 4.00 m Dimensions width: 1.20 m Dimensions height: 1.80 m Options: Cores: NO Bi metal: YES

Year 2013 Type of control: NC5 Number of hours: 47,812 Storage location: MECA PLASTIC Deadline: AVAILABLE Closing Closing force: 420 T Opening stroke: 770 mm Between columns: 820 x 820 mm Tray dimensions: 1200 x 1200 mm Mini/maxi mould: 380/825 mm Max gap between trays: 1595 mm Injection: Screw diameter: 60 mm Screw length: 25D cm3: 763 Bars: 2106 General: Motor power: 135 kW Heating power: 27.9 kw Closing weight: Injection weight: 24 tons Dimensions length: 8m Dimensions width: 2.2 m Dimensions height: 2.70 m Options: Cores: Robot interface: YES Bi metal: YES Others: 2 BLOW GUNS, 3 injection batteries, 16 hot runners

Control type: NC4 Closing force: 50 T Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini / maxi mold: 150/350 mm Max distance between plates: 410 mm Screw diameter: 30 mm cm3: 74 Bars: 1400 Motor power: 20 kw Heating power: 5 kw Cores: NO Bi metal

Machine: DEMAG 650T System 650/1000 YEAR 2008 Year: 2008 Control type: NC4 Number of hours: 38,000 H Closing Closing force: 650T Opening stroke: 930 mm Between columns: 1000 x 9000mm Tray dimensions: 1450 x 1350 mm Mini / maxi mold: 450/950 mm Max distance between plates: 1880 mm Injection: Screw diameter: 95 mm Screw length: 20D cm3: 3367 Bars: 1895 General: Engine power: 74 kw Heating power: 43 kw Closing weight: 25t Injection weight: 80tonnes Dimensions length: 10.10m Dimensions width: 2.50m Dimensions height: 2.60 m Options: Cores: 4 Robot interface: yes Bi metal: yes Others: 8 sequential, 24 zone hot runners, magnetic plate,

Machine: DEMAG EL EXIS S 300 / 720 -1450 Year: 2006 Control type: NC4 Number of hours: 42,000 Closing Closing force: 300 T Opening stroke: 670 mm Between columns: 710 x 830 mm Mini/maxi mold: 330mm Max distance between trays: 1380/1500 mm Injection: Screw diameter: 60 mm cm3: 763 Bars: 1970 General: Injection weight: 16 tonnes Length dimensions: 6.50 m Width dimensions: 2.0 m Height dimensions: 2.30 m Options: Cores: 1 2 BLOWS, 2 batteries on injection

Control type: NC4 Closing force: 300 T Opening stroke: 670 mm Between columns: 710 x 830 mm Mini / maxi mold: 330mm Max distance between plates: 1380/1500 mm Screw diameter: 60 mm cm3: 763 Bars: 1970 Others: 2 BLOWERS, 2 batteries on the injection

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 168 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 2020 bars CLOSING UNIT Closing force: 800 kN Opening stroke: 450 mm Mold thickness Mini / Max: 250 mm Max distance between tray: 700 mm Passage between columns: 400 x 400 mm Tray size: 580 x 590 mm GENERAL Heat output: 22 kW Total installed power: 30 kW Quantity of oil: 250 l. NC4 control Machine used exclusively in a clean room

Year of manufacture: 2004 Type of control: NC4 Number of hours: 27,000 H Closing force: 200T Opening stroke: 575 mm Distance between columns: 560 x 560 mm Tray dimensions: 830 X 830 mm Mini/maxi mould: 310/660 mm Max gap between trays: 1235 mm Screw diameter: 50/25 mm Screw length: 20 D Injection volume: 442/61 cm3 Injection pressure: 1946/1940 bar Motor power: 30KW Heating power: 14.8 KW Closing weight: 10T Dimensions length: 5.70 m Dimensions width: 1.70 m Dimensions height: 2.10 m 1 hydraulic core robot interface Bi-metal Turntable

Machine: DEMAG 420T System 420/810 -3300 Year: 2008 Control type: NC4 Number of hours: 40,000 H Closing Closing force: 420T Opening stroke: 710 mm Between columns: 810 x 710 mm Tray dimensions: 1200 x 1100 mm Mini / maxi mold: 380/820 mm Max distance between plates: 1530 mm Injection: Screw diameter: 80 mm Screw length: 20D cm3: 1779 Bars: 1855 General: Motor power: 45 kw Heating power: 31 kw Closing weight: 18T Dimensions length: 7.90m Dimensions width: 2.20m Dimensions height: 2.50 m Options: Cores: 4 Robot interface: yes Bi metal: yes Others: 8 sequential, 24 zone hot runner, magnetic plate

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 1905 bars PS plasticization capacity: 690 Kg / h CLOSING UNIT Closing force: 3300 kN Mold thickness Mini / Max: 330/710 mm Max distance between tray: 1385 mm Passage between columns: 710 x 630 mm Tray size: 1040 x 950 mm GENERAL Heat output: 55 kW Total installed power: 78 kW Quantity of oil: 700 l. EQUIPMENT - NC4 control - Electric motor on metering - Integrated hot ducts - EUROMAP - 3 Hydraulic cores - 3 Sequential cores - 1 Air core

Demag Ergotech Viva 800-400 Shot weight: 205 g Closing force: 800 kN Screw diameter: 40 mm Injection pressure: 1830 bar Column spacing: 400 x 400 mm Plate size: 590 x 580 mm Mold height min: 250 mm Type of control: NC4 German Installed power: 26.1 kW Working hours: 70 180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m A string of cores

Demag EXTRA 200-840 ECQ, without hopper Make: Demag Type: EXTRA 200-840 Construction year: 2007 Steering: NC4 Location: Poland Country of origin: Poland Screw diameter 50 mm Stroke volume: 442 cc Shot weight: 400 g Injection pressure: 1646 bar Closing force: 2000 kN Distance between bars: 580 x 580 mm Clamping plate size: 860 x 860 mm Power: 45 kW Dimension: 6.7 x 1.8 m Weight: 9000 kg Furnishing Robot interface: EUR 67 Air valve: 1x

turning length: 600 mm max. turning diameter: 320 mm swing diameter above cross guideway: 365 mm control: CNC Pilot 4290 Heidenhain Main spindle:: turning speed range - main spindle: max. 5.000 min/-1 power capacity - main spindel: 28 / 21 kW max. Torque: 320 / 240 Nm spindle nose: 170h5 chucking diameter: 215 mm spindle diameter in front bearing: 130 mm spindle bore: 87 mm max. bar capacity: 65 mm c-axis: turret:: number of toolpositions: 12 pos. tool taper: VDI 30 Driven Tool Stations:: Number of driven toolspositions: 12 pos. tool spindle speed range: max. 4.500 min/-1 power capacity driven tool-stations: 3,1 kW max. Torque: 10 Nm axis stroke:: x-travel: 250 mm z-travel: 635 mm Tailstock:: tailstock: 580 mm taper of center: MK 4 diameter of quill: 120 mm quill stroke: 150 mm feeds:: rapid traverse: X: 24 / Z: 30 m/min total power requirement: 44 kVA weight of the machine ca.: 5 ...

Panel thickness: 12 - 60 mm Feed speed: 18 - 24 m/min Edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood Equipment: Help carriage feeding the panels rectangular automatic fence at the infeed Squaring device: 2 x 3,0 KW Panel edge pre-heater Hot melt unit: QA34 / A20 edge magazine Lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers End trims HL83, programmable change straight/chamfer, 2 motors 0,5 kW Rough trimming: 2 x 1,5 KW Top/bottom fine trimming, tilting, 2 x 0,4 kW Contour trimming FK 13, 2 x 0,4 KW, with 8-fold toolchangers Universal milling motor 4kW Profile scrapers Flat scrapers Buffing unit with oscillation Controlls: HOMATIC NC16

Key data: 100000 kN, 149 g/PS, 35 mm

Clamping force: 100 t Year of construction: 2001 Injection weight in PS: 149 g Control Type: NC4 Injection unit: .../310 Screw diameter: 35 mm Spec. Injection pressure: 2020 bar Spray volume: 168.3 cc Injection weight in PS: 149 g Hydr. Drive power: 18.5 kW Cylinder heating capacity: 9.4 kW L/D screw ratio: 20 Clamping unit: 100/... Clamping force:: 100 t Size of clamping plates: 600 x 600 mm Lights spar spacing: 420 x 420 mm Ejector force: 41.2 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 150 mm General information: Fuel tank capacity OIL: 220 l Weight: 4800 kg Dimensions(m) LxWxH: 4.3 x 1.4 x 2.0 m Equipment: 1 x Hydraulic Core 1 x Pneumatic Valve

Key data: 250000 kN, 690 g/PS, 60 mm

Clamping force: 250 t Year of construction: 2008 Injection weight in HP: 690 (hp) g Control Type: NC4 Injection unit: .../1450 Screw diameter: 60 mm Spec. Spray pressure: 1905 bar Spray volume: 763 ccm Injection weight in HP: 690 (hp) g Clamping unit: 250/... Clamping force:: 250 t Size of clamping plates: 950 x 950 mm Lights spar spacing: 630 x 630 mm Tool installation height: 330...710 mm Aperture travel: 450 mm Max. plate spacing: 1160 mm General information: Delivery Time: Dostępna Fuel tank capacity OIL: 700 l

Clamping force: 35 t Year of construction: 2006 Injection weight in PS: 30 g Control Type: NC4 Injection unit: .../80 Screw diameter: 22 mm Spec. Injection pressure: 2061 bar Spray volume: 34.2 cc Injection weight in PS: 30 g Hydr. Drive power: 7.5 kW Cylinder heating capacity: 5.1 kW Clamping unit: 350/... Clamping force:: 35 t Size of clamping plates: 460 x 450 mm Lights spar spacing: 280 x 280 mm Aperture travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm General information: Delivery Time: Natychmiast Weight: 2750 kg Dimensions(m) LxWxH: 3.2 x 1.2 x 2.0 m Equipment Filling funnel Sorting flap bimetallic plasticizing structure hydraulic core on movable plate

Machine description - (Partial excerpt, further details on request):, - 6 motor spindles 5.5 kW max. speed 8,000 rpm., - Spindle capacity 16mm, Z 50mm stroke;, - 6 carriages X 40mm stroke, - 1 slide for counter operation, 75mm stroke., - Counter spindle with integrated motor 6 kW, - Max. speed 8,000 rpm, 150mm stroke,, - Rotating ejector with HP flushing, - Fanuc 30i numerical control, - Parts disposal and pneumatic, - Slide plastic coated, - Outer distribution belt greater capacity, - Active bar advance device, - Collets type F16 for active, - Bar preferential device, - Various Tension and reduction tubes, - Turning tool holder base (16x16), - Cross drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Front drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Electrical control cabinet, - Oil container 1,100 liters, - Coolant pump 100 l/min., 4 bar, - Paper filter system 5 ...

Description: Number of spindles for vertical drilling: ,14 + 12 Number of spindles for horizontal drilling 4-sided: ,6 + 2 Max. panel thickness: 115 mm Spindle speed: ,4000 rpm Routing rotation speed: 1000 - 24000 rpm Routing: ISO 30  ,  ,  , vacuum pump: 120 m³/h, serial number: 60,835, total electrical load: 14 kW, 5-axis machining: Yes, Number of vacuum pumps: 1 pieces, x-motion: 3,372 mm, y-motion: 1,200 mm, z-motion: 125 mm, path-feed rate max. X-axis: 75 m/min, path-feed rate max. Y-axis: 75 m/min, path-feed rate max. Z-axis: 15 m/min, saw unit: 0 - 90 graden roteerbaar, control: NC481, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,400 x 2,000 mm, weight approx.: 4,500 kg

Description: 50 x Spike spotlight RGB - waterproof - IP54 waterproof - dim. Ø 60 x 85 pitch 290 mm - material aluminum - with 30cm cable - mounting included - RGB - bulb ncluded - suitable for outdoor use Approx. Onsite Dimension. (l x w x h): 470 x 470 x 460 mm, weight approx.: 10 kg

Key data: 1100 kN

Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel Movements Original turntable Robot Wittmann-Demag W721 Year of construction: 2007 4-axis robots: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1 ...

Key data: 800 kN

Demag Ergotech Compact 800/420-200 Year of construction: 2000 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 400x400 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine was not in use in an ongoing production. This was only used to test the tools It is possible to change the screw diameter Metrics: Weight: 4000 kg Length/Width/Height: 3.90x1.40x1.90 m Drive: Pumps/motor: 18.5 kW Heating capacity: 7.5 kW Total power: 26 kW All offered machines are started by our service technicians before they are sold. It is possible to  ...

Key data: 800 kN

Demag Ergotech System 80/420-430 Year of construction: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 67 Robot Interface Air valve x 2 Hydraulic Core Pull x 3 Control with hot runners Injection unit hardened - Bimetal Built-in printer It is possible to change the screw diameter Metrics: Weight: 4100 kg Length/Width/Height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 500 kN

Demag Ergotech Compact 500-200 / Machine in very good technical condition Year of construction: 1997 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 7.5 kW Total power: 22.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical te ...

Key data: 500 kN

Sumitomo Demag IntElekt 50/370-80 / Electric Machine Year of construction: 2009 Injection unit: Screw diameter: 25 mm Injection weight: 39 g Spray pressure: 1580 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 370x370 mm Size of clamping plates: 520x570 mm Ejector: electric Clamping unit: toggle lever Control: NC5 - Touchscreen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Air Valve x 4 Control with hot runners Injection unit hardened - Bimetal Central lubrication It is possible to change the screw diameter Metrics: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected m ...

Key data: 500 kN

Demag Ergotech Compact 500-120 / machine in very good technical condition Year of construction: 1993 Injection unit: Screw diameter: 25 mm Spray weight: 54 g Spray pressure: 2000 bar Dosing volume: 61.3 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 1 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 5.1 kW Total power: 20.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live  ...

Key data: 250 kN

Demag Ergotech Compact 250-80 Year of construction: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tie bar spacing: 280x280 mm Size of clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in � ...

Description: Axes movement:X,Y,Z (mm): 460x250x320- , Feeds: ,X/Y/Z (m/min): 15/15/15 Table size (mm): 700x250 Number of T-slots: 3x12x70 Table load capacity (kg): 50 Distance of main spindle front from table plane (mm): 60-380 Distance of column from table centre (mm): 150-400 Distance of main spindle centre from column (mm): ... Main spindle:- max. max. speed (FPP): 8000- , Main motor power continuous/max.: 2,2/3,1 kW Gear ratio/ drive: 1:1 / belt drive Tool magazine: Number of tool places: 10-type of tool , Magazine: umbrella Tooling: SK30 Installation:- enclosure size (mm): 1866x1500x2050 net weight (kg): 1250 electrical connection: 3x400VAC z-motion: 320 mm, x-motion: 460 mm, y-motion: 250 mm, control: NCT, table surface area l x w : 700x250 mm, taper: SK30, rapid motion: 15 m/min, weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 2,0 ...

Description: IMPORTANT NOTE - To be collected by Friday 17 May 2024 at the very latest. Motorspindle: 20-18,000 RPM Internal coolant: 40 Bar MPG: Heidenhain HR410 Tool changer: 32 pockets, chain type Renishaw OMP 60 Touch probe New guides and screws fitted in 2019 on X and Y See Video on https://www.youtube.com/shorts/qIozU-nCvkw z-motion: 520 mm, max. workpiece weight between centers: 350 kg, x-motion: 750 mm, y-motion: 520 mm, control: Heidenhain TNC 430, pallet table size: 700 x 500 mm, taper: BT40, toolchanger positions: 32, feed range: 20,000 mm/min, rapid motion: 50 m/min, total power requirement: 25 kW, weight approx.: 9,500 kg, Approx. Onsite Dimension. (l x w x h): 6,600 x 5,100 x 3,500 mm

x-travel:600 mm y-travel:655 mm z-travel:675 mm weight of the machine ca.:22 t dimensions of the machine ca.:4,0 x 3,20 x 3,20 m 2 spindles, 5 axes B axis 360 x 0.001 Spindle: 20kW each, 12,000 rpm HSK-A63 2 x 40 pos. For technical data see attached PDF Machining center G 320 AB with swivel changer Project: GM 4284/01-01 to 06 Process: Production of cylinder head cover Al Si 9 Cu 3 Minimum quantity lubrication 1-channel Lubrix 2x5bar/4x10bar Lubricant Eccocut Micro Plus20 Tool magazine 2x40, cone cleaning Tool holder HSK 63 tool breakage control Tool monitoring Artis probe BDE connection Control Siemens 840D Solution Line NCU 720.2 (730.2) PN with PLC319-3PN/DP

Second-hand wide belt sanding machine Make Heesemann Type MFA Impression not rebuilt - without guarantee Year of construction 2010 Technical specifications: Sanding width 1,350 mm - cross sanding unit with pressure lamellar belt system - combined longitudinal sanding unit with calibration roll - longitudinal sanding unit - structuring brushing unit - dust removal brushing unit - 3 pressure beams with computer-controlled selective pressure control system CSD Distance of the control rollers 21 mm Feed speed: 3 - 15 m/min. Working height constant 880 mm motorized adjustment to the workpiece thickness 3 - 150 mm 1 pressure roller Ø 50 mm swinging, in the infeed of the machine including workpiece oversize control Roller table in the infeed of the machine 1 industrial PC 10.4 with program memory for 100 programs 1 cross sanding unit Abrasive belt ...