We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,260 used machines on RESALE, but how to find them? Machine Search
used
honing diameter: 110 mm stroke: 150 mm throat: mm total power requirement: 2,5 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
honing diameter:22/56 mm stroke:500 mm cycle time:40 sec Vertical Honingmachine - connecting rod (conrod) OEM Line.
used
honing diameter:30-180 mm stroke:600 mm throat:370 mm Verticval Honingmachine - machined Cyliner Liner - out of OEM Line.
used
Description: NAGEL VL15-700 PT Vertical Long Stroke Honing Machine with a stroke length of 7 metres and shuttle table. Control Honspindelsteuerung NAGEL MS-U3 Honspindel Anzahl der Spindeln: 1 hydr. Hublänge: 50 - 7000 mm Hubgeschwindigkeit (stufenlos) max.: 25 m/min Werkzeuganschluss: 65 mm Spindeldrehzahl (stufenlos): 30 - 280 U/min Hubantriebsleistung: 22 kW Spindelantriebsleistung 15 kW Messgerät Zeitautomatik (elektromechanische/elektrohydraulische Stufenerweiterung)  ,Gesamtdaten Hydrauliktank: 1250 l Gesamtanschlussleistung: 68 kW Bitte schauen Sie sich unser Maschinenvideo und die Dokumentation im PDF an. Werkzeuge sind nicht Bestandteil des Artikels. stroke: 50-7000 mm, control: NAGEL MS-U3, turning speed range: 30-280 rpm, feed range: 0-25000 mm/min, total power requirement: 68 kW, weight approx.: 25,000 kg, Approx. Onsite Dimension. (l x w x h) ...
used
honing diameter:10-120 mm stroke:350 mm honing length max.:700 mm spindle turning speed - stepless:80-1500 1/min Used Honing Machine Make: Nagel Type: PV-150/VS8-35LA 287032 YOM: 1993 Technical data: Z-spindle stroke 350mm Z-slide stroke 1500mm Cross slide travel: ± 60mm Longitudinal travel 1800mm Swivel table at 0/30/45 spline fixed Rotating speed 80-1500 U/min Variable flushing ring of 60-105 mm Control MS-U2 99 diverse Programmes Tool control hydraulical/EMZ/ Makroform Dimensional control via air measurement Still under power, fully functional
used
used
used
used
used
used
used
used
used
used
used
- 2 head drilling machine - standard machine - desk model
used
used
used
used
used
Four head paper driller Nagel Model Citoborma 480 AB Year 1988 Details 4 head paper driller with adjustable heads with tabulator Operation Electric Available Direct
used
Clip stitching machine nail Multinak S; good condition; cleaned and checked. 2xHeftkopf 24; Block or saddle stitch. Twin head stitcher nail Multinak S; good condition; cleaned and checked; two heads 24; flat or saddle staplinng.
used
used
Machine is cleaned and tested
used
2x Bags Perforation unit Machine is tested and works perfectly
used
Equipment / other information: 11xdrills & trolley
used
Equipment / Additional information: Tools
used
used
Brochure & block stitching machine Gable roof & flat table position 1-head model Stitching head spacing normal 8 cm works with staples (not with wire roll) Stitching up to 25 mm / stinging up to 45 mm Staple ring brackets option Stand model Electric motor Foot trigger
used
workpiece length: 1500 mm stroke: 0 mm swing dia.: 500 mm total power requirement: 30 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used
used
used
used
used
used
used
used
Paper drilling machine Nagel Citoborma 280 AB
used
used
used
used
used
used
Sr. No.: 801831
used
Size: A3
used
Nagel SE02-50 WA-/T/S superfinishing grinding machine Year 2007
used
There are three identical superfinish machines Nagel available, connected load: 11kW, controls: SIEMENS SIMATIC HMI, length: 2565mm, width: 2600mm, height: 2663mm, operational hours counter: 34,051h, year of construction: 2x 2015, 1x 2014, with documentation, there are additionally two automations Promot available.
used
Cabinet with tools for honing machine make NAGELCabinet size: 750 x 520 x 1460 mmNumber of drawers: 24Content consisting of- Honing tools- Recordingsused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
2 Head Stapling Machine Year: ca. 1987