mwm 226 used for sale

Technical data: -maximum pressing force 40 t -maximum piston stroke 218 mm -Height 410 mm -Projection up to mid slide 280 / 370 mm -Table size 650 x 520 mm -Plunger surface 500 x 400 mm -StöÃ?elboaufnahme DIN 810 50 mm -Work speed max.bis 226kN 39 mm / s -Min. working speed 21 mm / s -Eilabsenkgeschwindigkeit 428 mm / s -Rear hub speed min. / max. 100 / 420 mm / s -Table height above floor 820 mm -Oil quantity approx. 400 ltr -Drive 400 V / 15 kW -Space requirement approx. B 1400 x H 3200 X 2200 mm -Weight approx. 7000 kg -with: - hydr. PIN voltage -Control CNC 50 - separate control panel

Code: 0108 Brand: CENTAURO Model: T3-130 Hydraulic copying lathe for wood, stairs, frames, chairs, tables, etc. Automatic cycle turning system with one copier programmable to perform one or two passes Hydraulic copying unit with touch probe Max distance between centres mm 1300 Height of centres on pallet mm 226 Max diameter mm 250 Tailstock sleeve diameter mm 60 Tailstock sleeve stroke mm 100 Carriage feed speed mt/min 0/6 Carriage return speed mt/min 7,33 Spindle rotation speed rpm 900/1500/1800/2250/3000/4500 Spindle motor power Hp 5 Installed power Kw 4,8 Overall dimensions mm 3520 x 1190 x 1680 h Weight kg 1000

Horizontal bagging machine Laudenberg Mod. FBM 13, equipped with a BOSCH Mod. DOS 1B dosage system for powders. Technical data: Length: mm 3250 Width: mm 2950 Height: mm 2260 Net weight: Kg 2000 Production characteristics: Conveyor length: 1740 mm Capacity: 6 sachets/min Sachet Width: 45 – 88 mm Sachet Height: 50 – 200 mm This machine allows you to dose the product that will be packaged. The construction principle of the machine is based on an auger filler which, by turning, pushes a volume of product. The film coming from the reel is pulled and formed then sealed in four side by means of the welder. The product must be dropped in portions into the preformed tube. The filled tubular bag, with the product inside, is cut and the tube closed. The machine is complete with the feeding belt.

From stock Solenoid valve for air intake Hekomatic 12072648 MWM 12072648

FILLING MACHINE FOR SUPPOSITORIES FARMO RES, MODEL FARMODUE FD 22/U Year of construction: 1996 Automatic machine for the production of suppositories and ovules in strips of aluminum and thermoformable plastic. The product is dosed in precise volumes in the dosing station and these volumes can be changed automatically. TECHNICAL DATA Weight: kg 1930 Dimensions: mm 4650 x 3300 x 2260 Frequency: 50 Hz Voltage: 380 volts Volume of suppositories ml 0,2 – 50 Max. film height: mm 73 Production max monodoses/h: 22000 Capacity of product tank: L 55 Packing materials used: PVC, PVC+PE, PVDC, ALU+PE, PP+ALU+PE. Easy access for machine registration, cleaning, and maintenance. Format change is quick and easy, memorization of the dimensions of the parts is done from the display panel.

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

Clamping clamps, pointed filing clamps, hand filing clamps, screw clamps, steel construction clamps, clamps, clamping tools -Inside diameter: 104 mm -Dimension: Ø 155/30 mm -Weight: 2.1 kg

Height indicator, parallel indicator -Max. Working height: approx. 1100 mm -Dimensions: 275/96/1140 mm -Weight: 10.3 kg

transformer -Type: IS -Art.Nr.: 700175 -Primary: 400 V -Secondary: 230 V 4.35 A. -Dimensions: 150/155/H130 mm -Weight: 12.6 kg

Workbench, work table, assembly bench -Width: 1500 mm -Depth: 700 mm -Height: 840 mm -Work top thickness: 40 mm -Lockable drawer: 1 -Weight: 74 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Dimensions: Ø 220/H90 mm -Weight: 9.4 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 110 mm -Drawing: in the photos -Dimensions: 180/95/145 mm -Weight: 4.2 kg

Machine vise, sturdy vise, drill vise -Jaw width: 160 mm -Back height: 47 mm -Clamping depth: max. 157 mm -Number: 1x vices available -Price: per piece -Dimensions: 460/226/H130 mm -Weight: 33 kg

ROTOFLEX VLI 330 INSPECTION – SLITTER – REWINDER Machine information: Rotoflex products are proven in practical applications with self-adhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty die-cutter with slitter/rewinder and label checking will rewind rolls in a perfect register with a max. diameter of 700 mms and a max. width of 330 mms into smaller sized rolls. During the process, the labels can be checked for quality and missing labels. Specifications:  Max. web width: 330 mms  Roll diameter: unwind: 700 mms / rewind: 400 mms  Shaft diameter: unwind: 76 mms / rewind: 76 mms  Max. speed: 230 m/min.  Slitter  Rewinder  Splice table Description: unwind with splice tables and clamps, web guide and tension control (including automatic web holder at stopping procedure), pressure controlled die- ...

Manufacturer: Tox Pressotechnik Available pieces: 2 Models:CRS 03.226 and CRS 03.225 Serial number: 403484.2 and 403482.1 Weight: 90 kg Pressing force: 50 kN

Storage Tank/ Pressure Tank/Beer tank 2400 liters in AISI 304 with cooling jacket Test pressure: 1,5 bar, Operating pressure: 0,99 bar - NEW Material: V2A – AISI 304 (1.4301) Operating pressere: 0,99 bar Surface inside IIIC Operating temperature in °C: 130 Upper body: Manhole lid round DN 400 with 6 screws With 1 Thread connection DN 50 and with handle bar With CO2-connection (extra charge) With overpressure valve (extra charge) Tank cylinder: With cooling jacket With connections for cooling jacket on the back inlet 1” AG, outlet 1¼”AG With connection for sample valve DN 15 ( sample valve - extra charge) With connection for temperature indicator 3/8 (temperature indicator - extra charge) Lower bottom: Rest outlet with butterfly valve DN 50 with conical bottom On 4 stable feet Easily movable with a m ...

Flow filter, membrane filter housing, MSS 5010 GNW 50BH4, Pall, Stainless steel, used Top Attention! We have set the lowest price on the market for a comparable used part. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. - The filter is completely clean and bright. - Stainless steel (316L), - Incl. 5 cartridge filters - Cartridge filter length approx. 52cm - Incl. pressure manometer, - max. operating pressure 10 bar - max. temperature 95°C - 38 x 30 x 127cm high, 30kg, - Product connections in nominal width 50 / dairy pipe thread - high quality pharmaceutical version - for H2O: 10-15,000 l/h, for wine depending on application 1,000 to 2,000 l/h, for spiri ...

CATALOG NO. 7240 TECHNICAL DATA - inlet width 400mm - inlet height 210mm - shaft width 530mm - shaft diameter 500mm - knife length 530mm - number of knives 2 pcs - sieve dimensions 55x50mm - 2 geared rollers pulling from the bottom - lower shaft motor approximately 3kW - toothed shaft pulling from above - upper shaft motor 1.5kW - length of the feed belt 4600mm - feed belt width 400mm - main engine 55kW - autoreverse - feeder dimensions length/width/height 4630x620x760mm - machine dimensions length/width/height 2510x1700x1200mm - weight approximately 3500 kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 85,900 PLN Net price: 19089 EUR depending on the price 4. ...

Multivalent steam boiler system 2 x 10 MW, AS NEW For dusty fuels or natural gas H. 2 identical lines: Single-flame tube boiler with economiser Fuel so far: lignite dust Calorific value Hu: 22,190 kJ/kg Ash content: 3.0 % – 3.5 % Rated thermal input: 19.5 MW FWL (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation Preset also for natural gas operation H Calorific value HS: 11.4 kJ/Nm³ (calorific value Hi 10.4 kJ/Nm³) Rated thermal input: 19.5 MW (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation The change of the burner operation is carried out by changing a fitting piece on the burner. Boiler 1 and boiler 2 can be fired at the same time with different fuels. If desired, the contents of both fuel silos can also be b ...

Grease melting tank, double-walled stirring tank, rühwerk tank, coolable, heated used Manufacturer: KLARMANN Edelstahverarbeitung Type: Fat melting tank Year of construction 2017 Stainless steel 1.4404 / 1.4301 Total volume: 610 liters Working volume: 500 liters Diameter inside / outside approx. 1000 / 1100 mm Design temperature product rough/jacket space: 100/150°C Operating temperature: Product room: 90°C Design pressure jacket space: 5 bar Heating/cooling surface: bottom and 2/3 of the frame designed as templates Outlet height approx. 800 mm Calculated melting capacity for butter 20 - 30 min for 300 kg of block goods, depending on the output temp. and product size Compact agitator Planetroll 0.37 kW 77 rpm 400 V IP55 Dimensions approx. 1165 x 1165 x 2260 mm Original price approx. 18000,- € The staircase is not included The plant comes from a plant  ...

Web edge control for films Type: Ultrasonic Edge Sensor FX 5060 No. 226142 24V supply voltage, current consumption 170 ma Interface CAN - Profibus DI-B000-157905M Actuator AG 5791 / AG5891 Edge Sensor FX5060

- 2 ZK yeast tanks, Fabr. BAM, each with a capacity of 59.98 hl, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 feet, with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel cone tip, with agitator in the cone, with Spray head, top with ladder bracket, YOC 1985. - 2 ZK yeast tanks, Fabr. Steinecker, with a capacity of 62 hl each, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 Feet (1 foot on load cell), with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel Cone tip, with agitator in the cone, with spray head, pulled down cleaning line, top with conductor bracket, YOC. 1981.

- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

Hob: External gears workpiece diameter (tip diameter), max.: 100 mm Minimum circle of shell end mill arbor: 22 mm Maximum tooth length 180 mm Maximum length 140 mm Trolley race: Radial stroke (X axis): 90 mm Tangential stroke (Y axis): 80 mm Axial stroke (Z axis): 400 mm Races of auxiliary trolleys: Loading portal (X5 axis): 2268 mm Sliding headstock (Z4 axis): 360 mm Maximum swivel angle of the milling head: Direction -A: 45 degrees Direction +A: 118 degrees Work table: External diameter: 120 mm Bore: 40 mm Machine size(LxWxH): 5195 mm x 3142mm x 2928 mm Feed rates: X axes, and Z: 1 to fast forward mm/min Rapid traverse: X axis: 7500 mm/min Y axis: 5000 mm/min Z axis: 15000 mm/min Rotational speeds: Tool: 50 to 12000 rpm Workpiece spindle: 0 to 3000 rpmControl: SINUMERIK 840D sl Machine Weight: 8000 Kg

4 up Thermal CTP Manufacturer: Heidelberg Model: Suprasetter A52/A75 year: 2009 22600 plates produced with Cleanout unit and Stacker Metashooter RIP Software Available: now Price: on request

belt width: 150mm; belt length: 2260mm; veneer grinding unit: nein; oszillation: ja; weehl diameter: 115 mm; grinding unit tiltable: ja / 90° - 0°; working table: 750 x 250 mm; seperate table: 300 x 245 mm; belt speed: 16,3 m/sek.; suction connection: 100mm; motor power: 3 kW / 400V; machine length: 1270mm; machine width: 600mm; weight: 120kg; properties Oscillating sanding belt ensures a high removal rate and a clean sanding pattern Large dimensioned work table with integrated T-slot for holding the miter fence Easy sanding belt change by means of quick release lever Sprung belt tension, thereby automatic compensation of belt length differences Continuously swiveling sanding unit for vertical and horizontal sanding Graphite coating on the back of the sanding belt increases the sliding properties of the sanding belt As standard with mechanically oscillating grinding  ...

DENER SERVOBRAKE 4015 CNC press brake which was built in Turkey in 2016, guarantees the highest quality of workpiece machining with simultaneous low energy consumption and low operating costs. Distinguished by its sturdy construction and state-of-the-art technology, the machine is equipped with a powerful electric drive based on servomotors and belts with a multi-belt system. Replacing the standard hydraulic system with an electric drive makes the SERVOBRAKE DENER DDM 4015 servo press brake much easier to maintain and faster than conventional hydraulic presses. This is possible because the machine is free of hydraulic oil, filters, seals and other hydraulic components. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. The DENER servo electric press brake is also equipped with an in ...

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

RECON Bosch Starter for MWM 620 V12 Part number: 0116 2640 / 1204 1381 Bosch number: 0 001 510-003 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

We have crankshafts from various manufacturers (DEUTZ, MaK, MWM, etc.) on hand. If you are interested, please send us an e-mail

RECON Bosch Starter for MWM TCD 2016 V12 Part number: 0117 8721 Bosch number: 0 001 417-058 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

JOTES SPD 30B surface grinding machine of Polish production is a manufacturing machine with horizontal spindle axis that performs grinding on the periphery of the grinding wheel. The workpiece of maximum length 1000 mm and width 300 mm is mounted on a rectangular electromagnetic table or directly on the grinding machine table. The work table moves on the base guideways and the change of its direction of movement can be performed automatically by bumpers or manually by adjusting a suitable lever. The hydraulic drive of the machine’s work table allows continuous adjustment of the speed in the range from 2 to 30 m/min. The installed grinding wheels, with a diameter of 350 mm and a width of 63 mm, are driven by an electric motor mounted directly on the grinding wheel spindle. The grinding wheels are moving at a peripheral speed of 26 m/s. The total weight of the magnetic surface grin ...

3-spindle deep hole drill -without electrics- Year of construction 1998 / rebuilding 2014

Brand: MARELLI GENERATORS, Conditie: NEW, Generator KVA: 3550 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 5124 , , https://www.hamofa.com/catalog/product/view/id/226794, , = More information =, , Type: Engine, Type number: MJB630 LA4B24 LOSSE GEN 3550KVA

Thermoformer - UPS4 Year - 1993 Min. - Max. Forming width - 62 - 226mm Cycles - 15 - 50 cycles/minute Forming depth - PVC - 12mm ALU - 10mm Blister Format - Min. - 60mm Max. - 140x39mm Punching Area - Length - 226mm Width - 284mm Forming Film width - Min. - 100mm Max. - 298mm Lidfoil Width - Min. - 100 Max. - 298 Tooling - PVC/Alu - 6 Blister line size 39x94mm Alu/Alu - 7 Blister line size 38x86mm Machine Control- PacControl version 2.17 Camera – not included Hapa Printer - H-231-1

Product number: 1501B Type: Multifreezer T Serial number: 2007-150 Year of construction: 2007 Belt width: 1850 mm Belt length: 18300 mm Product gap: 85 mm Refrigerant: NH3, R717, ammonia Cooling power: 224 kW Evaporator: 3 pcs. Raffel, 2266 m² Power: 3 x 400V, 55kW Dimensions: 19800 x 3580 x 3450 mm

Working to the end with the MWM 620/2020 engine.

Used Ex MWM 616-16 Built: 50/2000 Type power: 1110KVA Frequency: 50HZ RPM: 1500 Volts: 400V/231V ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

WOHLENBERG QUICKBINDER -Year 2001, Colour touch screen monitor -Automatic perfect binding machine with 5 clamps -Hot-melt spine and hot-melt side glue tanks with premelters -Automatic cover feeder with creasing devices, suitable to load covers with flaps (also not glued) -Solema belt delivery connected in flow line with the three knife trimmer Horizon HT 70 -Maximum size: mm. 430 x 320 x 70 mms -Max mechanical speed 2.000 cycles/hour HORIZON HT 70 -Three knife trimmer Year 2001 -Quick set changings -Max trimmed size: 330 x 330 mm -Format the finished book Min. : 100 x 142 mm -Maximum cutting thickness: 50.8 mm -Speed max: 1000 cycles / hour -Solema pre-stacker -Solema belt delivery connected in flow line with the perfect binder Wohlenberg Quickbinder -Installed power: 3,0 kW - Power supply voltage: 400V, three phase, 50 Hz -Dimensions: 2260 (L) x 1160 (D) x 1600 ...

Pendulum circular saw Irion Cutting width 350 mm Roller table 3000 mm L x W x H: 600 x 500 x 1800 mm Weight approx. 250 kg Built in 1978 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Chain stemmer GF with drilling unit for wall mounting L x W x H: 1200 x 800 x 2300 mm Built in 1972 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Spiral kneading dough machine Kemper model: SP 150 ALH with 2 extendable tank wagons Kneading machine for max. 250 kg dough Cover hood with protective circuit with 2 timers and 2 gears Lifting and lowering via control Hand and automatic operation E-plant NEW DGUV V3 tested Connection 400V, 50 AMP, 63A-CEE plug Used machine overhauled Visit our Milbrandt Outlet with show bakery and many bakery machines!

Bread machine for square special rolls Model: Quadro Fit incl. 3 longitudinal cutting rollers Ribbon flourer for inlet belt LED control, Stainless steel Machine mobile with fixed Connection 400V, 16ACEE plug Used machine is cleaned and workshop tested Come to our bakery machinery warehouse!

Machine number: 000 226 Year of construction: 1995 Output: up to 3,600 K/h Formats: Cross rotation module box 400 x 300 mm A general overhaul in our workshop would be possible by arrangement.

Power unit, diesel generator, diesel generator, container unit used INTERSCHALT Type: WD 1000-1500 N/2.3 Built in 1980 Rated power: 1050 KVA Power: 800 kW Voltage: 10000 V Frequency: 50 Hz Engine Mwm TBD602V16K 945 kW 1500 rpm Generator Siemens 1FG7633 Dimensions: approx. 12 x 2.4 x 2.6 m

Gas generator generator generator used AC Generator Manufacturer Newage Engineers LTD Type Stamford HC434F Power 375 kVA / 1500 rpm 220/380 V Gas engine Manufacturer MWM Deutz Type TBG 234 V12 Built in 1988 Power 300 kW / 1500 rpm with heat exchanger BLOKLAND NON FERRO BV Type 275-2000 Area 20 m2 Dimensions total approx. 4100x1250x2400 mm + control cabinet approx. 1500 x 700 x 2100 mm

Dough kneading machine Universal Charge Nneter WP UC 80 a Wendelkneter with 2 extendable tank wagons manual control 2 watches, 2 speeds Stainless steel kneading tool DGUV V3 tested Connection 400 V, 13.kW, 63A-CEE plug Used machine overhauled with 6 months warranty

pressure / power: 50 kN control: Siemens Simatic OP 7 serial number: 2263 weight of the machine ca.: 2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.