mvs ts used for sale

Deep hole drill grinding machine Dimensions 7007001580mm High

release agent spray unit Electr. connection: 400 V 3-ph, 16 A Compressed-air connection:6 bar, oil-free Working pressure:0,1-0,5 bar renovated

working width: 1250 mm maximum length of workpieces 3500 mm feed speed 2.4 - 7.5 m / min finishing line consisting of the following elements: - infeed conveyor - brush sander with 4 transversal brusches - brush sander with 2 longitudinal brushes - dust removal with brush and blowers - Spray cabin Rotoclean G8 rotating arm with 8 pistols workpiece recognition for saving paint workpiece transport with steel belts recuperation and cleaning steel belts air cleaning with water curtain - 3 lacquer pumps GRACO 015.085 - 7 pumps for color stain GRACO Husky 515 - intermediate conveyor - cross transport with rods and overhead hot air dryer - intermediate conveyor - drying tunnel with IR lamps - UV dryer with 2 lamps - outfeed conveyor

spindle diameter: 125 mm x-travel: 3000 mm y-travel: 1500 mm control: Heidenhain TNC 355 taper ISO: 50 w-axis: 600 mm Table dimensions: 1200 x 1500 mm table load: 5 t spindle turning speed range: 12 - 2300 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speeds: 24000 U/min frequency: 0 Hz output: kw High Frequ. Grinding spindle, type: TSSV 150 - 15000/16, 16 kW,dia 150 x lgth 400,15.000rpm TSSV 150 - 15000/16, 16 kW,dia 150 x lgth 400,15.000rpm TSSV 150 - 24000/12, 12 kW,dia 150 x lgth 400,24.000rpm TSSV 150 - 24000/12, 12 kW,dia 150 x lgth 400,24.000rpm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: -- mm cross-section heigth:: -- mm feed:: -- mm speed of feed:: 0,4 - 20 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 5000 mm plate thickness: 6 mm distance between columns: 5030 mm throat: 340 mm weight of the machine ca.: 14 t dimensions of the machine ca.: 5500 x 2250 x 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with ...

sheet width: / mm plate thickness: / mm distance between columns: / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80, ELCO 85 P Lower knife height adjustment The data for this ad was created with ModulMWS - the software soluti ...

machine measurements: -- mm machine weight: -- kg power capacity: -- kW Condition: used, Specification: drum-type blast deburring machine type: MEWO Rotor TS 60 - batch volume approx.: 1-600 litres, - working temperature: - 150°C - drum speed: 5 - 30 rpm - Blast wheel speed: 1,000 - 9,500 rpm - Control: Siemens S7 Simatic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Filling- and crimping machine under vacuum for cream flacons or other cosmetic packaging. Working with airless guarantee that no air is trapped with the product during packaging. Machine is fittet with mobile vacuum unit, vacuum pump, various format parts, spare parts etc. Max. output: 2000 units/h.

-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging

Inv. Num. : 3861 Type: L-K 120-3100 TSI Producer: SAFAN Created: 2002 Parameters: Control system: SAFAN Pressing force: 1200 KN Bending length : 3100 mm stroke: 180 mm Dimensions: 4200 x 1650 x 2775 mm Machine weight: 8700 kg

sheet width: 6000 mm plate thickness: 6 mm distance between columns: 610 mm Control: Elgo 87 P2 total power requirement: 15 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Product number: 2339 Type: TSO600/96/4 EL Serial number: 10066195 Year of construction: 2008 Model: counter-clock-rotated, left hand side Belt width: 600 mm Tiers: 2 x 4 pcs. Product gap: 135 mm Heating: electric, 4 x 100kW Steam: 7.5-8 Bar, 525 kg/hr Power: 3 x 400V, 50Hz, 440kW Dimensions: 11040 x 3994 x 3287 mm Weight: 20000 kg

Spotting Press Fabr. GUSTAV HESSMERT Type TSD 40Masch. -No: 125/85 built in 1985Pressing and clamping pressure: 20 - 400 kNRetraction pressure: 100 kNDischarge pressure: 5 - 40 kNOperating pressure: 200 barClosing speed: 0 - 17 mm / sec.Opening speed: 0 - 37 mm / sec.Press speed: 0 - 4.0 mm / sec.Usable table surface: 600 x 600 mmInstallation height: 600 mmRam stroke: 300 mmAustoßerhub: 150 mmDisplacement weight: 600 kgSwivel and rotary weight: 300 kgSwivel and rotation angle: 180 degr.Operating pressure: 250 barConnected load: 380/220 V, 4.0 kWWeight approx: 2,3 tWith- swivel head above- T-slot table 0.6 x 0.6 m- in 2015 renewal of the PLC control Siemens,xa0xa0 with new program recording and network connectionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors ex ...

CNC sheet metal shears make EHT type TSS 4-20Fabr. -No: 107785, year of construction 1998Technical specifications:Working length: 2020 mmmax sheet thickness at 450 N / mm 4 mmOil volume: 160 lelectr. Connection: 400 V, 50 HzDrive line: 7.5 kWDimensions approx: 2800 x 2150 x 2150 mm, weight approx: 4.5 tWith- CNC control ELGO P 8721- Hold-up device- Scrap chute- foot switch- automatic cutting angle- automatic cutting gap adjustment- 3 angle stops in front- Cutting line lightingin a little used and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

1 of used trayshrinkpacker, make KHS/Kisters, type TSP 80 V, new 2004. Operating side: right. Siemens S7 plc controls. Nordson hot-melt unit. Capacity upto 100 trays/minute. Last used for packing loose and pre-packed (film-only multipacks) beverage cans (standard 66 and sleek 58 mm) cans on tray with or without film as a total of 12, 18 and 24 cans per tray. Quick changeover via servos and spindels. Available beginning 2023.

CNC-controlled hydr. Sheet metal shearing machine make WEINBRENNER type TSV 6/3050Machine -No: 687 T built in 1987gr. Working width: 3050 mmFor sheets with 45 kg strength up to: 6.0 mmclear column width: 3160 mmclear stator projection: 200 mmCutting angle min./max .: 1/2 °Backgauge adjustment: 1000 mmNumber of hydr. Hold down: 12Number of strokes min./max. (depending on cutting length and material thickness): 22/36 / minHydraulic drive: 380 V, 15 kWTable height above hall: 900 mmDimensions incl. Backgauge, without frontSupport arms: 4100 x 2300 x 2100 mmWeight approx .: 8500 kgWith- Control in swivel control panel CYBELEC CNC 1000- compl. elec. Device with control device in the large switchingxa0Cabinet attached to the side of the machine- Backgauge control with programming- Material quality code- Sheet thickness preselection- stroke length adjustment- Contact cutting device- Scrapweed- ...

Tetra Pak High Speed Straw Applicator TSA 30 For Sale Item #: Usm-164 Category Straw Applicator We have several Refurbished Tetra Pak High speed TSA 30 Straw applicators for sale.

Machine name: Vertical Heating Cooling Mixer Manufacturer: Lödige Type: TSHK160 / KGU400 Year of construction: 2005 Speed: 104 / 300-1500 rpm Operating hours: Very few operating hours Material: Stainless steel Drive motor: 11 / 45 kW Design: ATEX version / explosion-proof Total capacity: Heating mixer: 210 liters / Cooling mixer: 391 liters Wetted parts: 1.4541 Gearbox: bevel gear motor / motor frequency-controlled Dimensions: L 4605 x W 4225 x H 3550 mm Tech. Documentation: Yes Note: Technikum Betrieb. Wood chips / melanin resin additives Accessories: Stage with stairs, temperature control unit 30 kW, platform scale, control panel, control cabinet, dust filter

sheet width: 1050 mm plate thickness: 3,0 mm ST cutting angle: 2,0 ° stroke max.: 38 p. Min. total power requirement: 5,5 kW weight of the machine ca.: 1690 kg. range L-W-H: 1800 x 1800 x 1250 mm from a maintenance workshop () Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank Travel range max. 700 mm with analogue position display (scale) manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I sell a double end profiler milling machine CELASCHI TSA 280D. Working width up to 2800mm Configuration left side / fix: 1 pcs. cutting unit 4.0 KW 1 + 1 pcs. milling units top + bottom / 4.0 + 4.0 KW 1 + 1 pcs. side milling units 4.9 + 4.9 KW Configuration right side / movable: 1 pcs. cutting unit 4.0 KW 1 + 1 pcs. milling units top + bottom / 4.0 + 4.0 KW 1 + 1 pcs. side milling units 4.9 + 4.9 KW Material pressure band with support from above. Continuous machine. Combined power 47KW NA1200 Positioner. Condition Very good. Available the same.

Stainless steel bag filter with quick release, TSBF-0102-AD06-050D, Hayward, used Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. Technical data: - Filter size 2, - Filter bag size 2 required (not included in delivery) - Inlet from the side left flange DN50 - Outlet to bottom flange DN50 - Incl. stainless steel basket and pressure ring - Operating pressure max 6 bar - Perm. temperature 160°C - Design - cover with quick release fastener - With mounting brackets for wall mounting - Filter volume 32 L - Design in stainless steel 1.4571 - Incl. round cord seal - The filter is in top condit ...

Stainless steel bag filter with quick release, TSBF-0102-AD06-050D, Hayward, used Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. Technical data: - Filter size 2, - Filter bag size 2 required (not included in delivery) - Inlet from the side left flange DN50 - Outlet to bottom flange was changed to DN80 - Incl. stainless steel basket and pressure ring - Operating pressure max 6 bar - Perm. temperature 160°C - Design - cover with quick release fastener - With mounting brackets for wall mounting - Filter volume 32 L - Design in stainless steel 1.4571 - Incl. round cord seal - The filter i ...

TSDW-205W Semi Automatic Weighers is the perfect weighing solution for „difficult products, which need to be packaged at fixed weights for the supermarkets shelves. The TSDW-205W Semi Automatic Weighers in this series are unique to the market and fill the need for processing between manual and automatic packaging. The TSDW-205W are equipped with individual actuator units which are connected to a control computer. The principle of operation resembles that of an automatic multihead weigher. Features Semi Automatic Multihead Weighers with 12 Actuators Combination speed 20 to 25 wpm Number of weigh heads 12 Net weight for flat conveyor 150 kg Net weight for V-shape conveyor 160 kg Operating temperature 0°C to 40°C Available with flat and V-shape conveyor The main computer calculates the desired combination in a fraction of a second and activates the conveyor belt in the rel ...

Available in stock 2 x NEVER USED Industrial Ventilation Fans TSBD-3. The photos are only examples of the same model. The ventilation fans on sale have never been used and are still inside the original packaging. Specifications: Model: TSBD-3 Dimensions: 1100 x 1100 x 400 mm Flow: 32 500 m3/h Power: 0.75 kW Voltage: 380 V Frequency: 50 Hz Blade Diameter: 1000 mm Speed: 427 r/min Single phase

-Release agent spraying system for bread baking tins -Grease baking tins -Grease box moulds

Serial No. FH. DMA0-00272, The Twinstacker TSH Vertical Stack Delivery Is The Economical Solution To Broadly Cover The Medium To High Capacity Range. The Delivery Transports The Individually Pressed Sheets Through The Belt Section Without Marking. Subsequently, The Stacks Are Formed From The Top In Catch Baskets And Laid Out Alternately – In Two Stacking Levels Arranged One Above The Other. This Enables Effective Non-Stop Operation. The Simple Handling With Good Accessibility Also Facilitates The Processing Of Multiple-Ups. The Height-Adjustable Feed Table Ensures That The TSH Twinstacker Can Be Positioned Easily And Flexibly At The Various Preliminary Stations. Whether Laying Out Isolated Sheets Or Even In A Shingle Stream – The Twinstacker TSH Convinces In Every Respect With Its Performance. User-Friendly Stack Delivery, Mark-Free Laying Out Up To Two Uses, With User-Friendly Ergon ...

Available in stock 2 x NEVER USED Industrial Evaporative Air Coolers TSBD. The photo is only an example of the same model. The evaporative air coolers on sale have never been used and are still inside the original packaging. Specifications: Air flow: 18 000 m3/h Wind pressure: 180 pa Voltage / Frequency: 380 V / 50 Hz Power: 1.1 kW Ventilation type: Axial flow type Water consumption: 10 - 15 l/h Water storage: 25 L Dimension: 105010501050 mm Weight: 65 kg Outlet size: (lengthwidth) 670670 mm Noise:

Product number: 2465J Type: TSMIG850L Serial number: 60021 Year of construction: 1998 Mixer: 850 litre double paddle mixer Grinder: 250 mm, enterprice Power: 3 x 400V, 50Hz, 41kW Dimensions: 1800 x 2500 x 2200 mm Weight: 1800 kg Including tool trolley

Stock number: 3732 INTERNAL CYLINDRICAL GRINDING MACHINE Manufacturer: TRIPET HAUSER HTT CNC , Type: TST 100 CNC-4R Machine NO.: T1000256, Year of construction: 2002 Specifications: Grinding length 300 mm Size internal grinding diameter 0.5-75 mm Center height B axis- 130 mm C-ash main spindle 3" - 100 rpm degree Z ash 340 - 0.0005 mm mm B- Ashes Manuel -30/+60 degree X ash cross slide 50 mm Grinding spindle speeds 4 spindles - 25,000 - 45,000 2x 75000 rpm Resolution 0.0005 mm Tool spindle dock speeds B- axis 10-1500 rpm CNC control. Control Brüsch TPS 3000 Fabr. Accessories: Centering chuck PHM Heyn Pneumatic. 250 mm Ø Papir Filter Knoll Length: 2500 mm, Height: 2300 mm, Width: 2500 mm, Weight: 3500 kg

Automatic traysealing machine, for preformed containers. Semi new used equipment. From the manufacturer INAVEN MASCHINEN AG (VC999), model TS1200 N. Specially designed for packaging in heat sealing format with vacuum and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transport. It automatically performs the MAP cycle, heat sealing and gas injection, perfect film trimming and automatic film collection. It has 2 sealing lasts in different formats. Lasts for sealing 2 containers at the same time. • External dimensions 4400 mm long x 870 mm wide x 1790 mm high, input tape 2700 mm long, output tape 1120 mm long. • Power 6 kW; • Power supply 400 V, 50 Hz; • Measures of containers by molds: 1st Mold 225x180 mm x 2 containers 2nd Mold 180x130 mm x 2 containers • Film width 460 mm; • Roller width 480 mm; � ...

Automatic rotary traysealer from the manufacturer VC999, model TS900. It is a traysealer made in Switzerland, with rotary table in 4 positions. The machine is prepared to make up to 4 containers at the same time: only sealing, empty/sealing and vacuum/sealing/modified atmosphere. It is suitable for the use of a wide range of packaging of any material (PP, PS, APET, CPET, cardboard, etc.) using compatible film. VC999/TS900 has been designed to offer a compact solution (occupies just under 3m3) and allows, thanks to a high technological content, to meet high production needs (up to 2400 pieces / hour). The solidity and versatility of this model, together with an optimal value for money, have made the VC999/TS900 one of the most successful and highest quality machines on the world market. Built with first-class components, with exclusive noble materials (stainless steel and anodyne ...

Product number: 2544J Type: TSMV1250L Serial number: 61935 Year of construction: 2001 Mixer: 1250 litre paddle mixer, intermeshing Vacuum pump: Speck V-155 liquid ring Power: 3 x 400V, 50Hz, 19kW Dimensions: 3150 x 3100 x 3700 mm With inspection platform Including lifter for 200 litre tote bins

Semi-automatic traysealer from the manufacturer JPACK (MECAPACK), model TSS125, prepared for packaging with protective atmosphere, with vacuum or only heat sealing. Automatic traysealer, works at cycles of 3 trays, 5 cycles per minute with heat sealing with vacuum and gas. Tray feeder by manual trolley. Output of the machine through the same input carriage. The heat sealing machine performs a welding process from one thermoplastic to another thermoplastic or other compatible material using heat and pressure. It is used to make a protective atmosphere by extracting oxygen from inside the container and replacing it with an inert gas, or it only performs the sealing action and can also be sealed with vacuum. The machine is ready to plug in and work with. External measurements (mm): Height: 1460, Length: 680, Depth: 1110. It has 1 molds to work. Tray stockings (mold) : 13 ...

Substructure painted Automatic machine with chain drive width: 450 mm Band height: adjustable Spray nozzles: 3 pcs. With pressure control Technically repaired

Fully automatic packaging system for tray sealing with contour cutting and MAP & Skin technology Item condition: maintained Design: stainless steel Programs that can be stored: 10 Temperature control: electronic Unwinding and unwinding of the film: automatic Quick-change system: for tools Other information: attached data sheet Dimensions (W x D x H): 2487 x 877 x 1535 mm Weight: approx. 300 kg Power consumption kW: 4.7 Electric voltage volt: 380V 3P+N+T Pneumatic supply bar: 6 - 8 Air consumption Nl/c: 33 Gas consumption bar: 1.5 / 0.9 Sealing plate dimensions mm: 390 x 280 Maximum shell height mm: 100 Maximum film diameter mm: ø240 x 480 Productivity cycle / minute Productivity cycle / minute Original price: 56.525,00 € Original offer: see attachment

Thermostats, sensors, air and strap-on thermostats -230 V AC -Price: per piece -Number: 2x available -Weight: 0.3 kg

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet -Mounting plate for: control cabinet -Dimensions: 1895/500/22 mm -Weight: 28 kg

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

sheet width: 1500 mm plate thickness: 4 mm back stop - adjustable: 10-1000 mm no. of strokes: ca. 20 Hub/min cutting angle: 1 ° table height: 850 mm total power requirement: 8 kW weight of the machine ca.: 3300 kg dimensions of the machine ca.: 2500x2000x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power supply unit, DIN rail -Type: TSP 360-124 -Weight: 1.4 kg

Power supply unit, DIN rail -Type: TSP 180-148 -Weight: 0.7 kg

Power supply unit, DIN rail -Type: TSP 180-124 -Weight: 0.7 kg