multi spindles used for sale

Year of manufacture: 1965, Serial number: 702, Voltage: 230 volts; Equipped with: rotating table, speed adjustable from: 0-220 / rpm, including Bosch GGS28LC2 grinder, pneumatically controlled. Auction-ID: A1-44050-110

Equipped with T-slot clamping table (550x350 mm), including HP laptop. Auction-ID: A1-44050-53

Complete Victron Energy 3-phase ESS home battery and energy storage system with 32kWh LFP (LiFePO4) and 3x Victron Multi RS. Suitable for residential and business applications and can be integrated with an existing or new solar panel/PV installation. System configuration: • 32kWh LFP battery storage • 3x Victron Multi RS • Inverter power: approx. 15.9 kW continuous total at 52 V / 25 C • 3-phase Victron ESS • Suitable for integration with solar panels / solar PV • Battery Management System (BMS) • Professional pre-assembled system • Year of construction: 2026 Applications: Home battery and business energy storage, solar energy storage, increase in self-consumption/self-consumption, peak shaving, load shifting, dynamic energy tariffs and - with a suitable system configuration - emergency power/backup. Victron Energy ESS combines battery storage, inverter/chargers and en ...

Complete Victron Energy 3-phase ESS Solar battery storage system with 32kWh LFP (LiFePO4) and 3x Victron Multi RS Solar. The Multi RS Solar combines inverter/charger and integrated solar/PV functionality. Suitable for homes and business applications, for connection with solar panels and for storage of solar energy. System configuration: • 32kWh LFP battery storage • 3x Victron Multi RS Solar • Inverter power: approx. 15.6 kW continuous total at 52 V / 25 C • 3-phase Victron ESS • Integrated solar charging/PV functionality • Battery Management System (BMS) • Professional pre-assembled system • Year of construction: 2026 Applications: Home battery and business energy storage, solar energy storage, increase in self-consumption/self-consumption, peak shaving, load shifting, dynamic energy tariffs and - with a suitable system configuration - emergency power/backup. Victron  ...

Complete Victron Energy 3-phase ESS home battery and energy storage system with 32kWh LFP (LiFePO4) and 3x Victron MultiPlus-II 5000. Suitable for residential and business applications and can be integrated with an existing or new solar panel/PV installation. System configuration: • 32kWh LFP battery storage • 3x Victron MultiPlus-II 5000 • Inverter power: 15 kVA total / approx. 12 kW continuous at 25 C • 3-phase Victron ESS • Suitable for integration with solar panels / solar PV • Battery Management System (BMS) • Professional pre-assembled system • Year of construction: 2026 Applications: Home battery and business energy storage, solar energy storage, increase in self-consumption/self-consumption, peak shaving, load shifting, dynamic energy tariffs and - with a suitable system configuration - emergency power/backup. Victron Energy ESS combines battery storage, invert ...

Complete Victron Energy 3-phase ESS home battery and energy storage system with 64kWh LFP (LiFePO4) and 3x Victron MultiPlus-II 6k5. Suitable for residential and business applications and can be integrated with an existing or new solar panel/PV installation. System configuration: • 64kWh LFP battery storage • 3x Victron MultiPlus-II 6k5 • Inverter power: 18 kW continuous total at 25 C • 3-phase Victron ESS • Suitable for integration with solar panels / solar PV • Battery Management System (BMS) • Professional pre-assembled system • Year of construction: 2026 Applications: Home battery and business energy storage, solar energy storage, increase in self-consumption/self-consumption, peak shaving, load shifting, dynamic energy tariffs and - with a suitable system configuration - emergency power/backup. Victron Energy ESS combines battery storage, inverter/chargers and ene ...

Complete Victron Energy 3-phase ESS home battery and energy storage system with 64kWh LFP (LiFePO4) and 3x Victron MultiPlus-II 4k5. Suitable for residential and business applications and can be integrated with an existing or new solar panel/PV installation. System configuration: • 64kWh LFP battery storage • 3x Victron MultiPlus-II 4k5 • Inverter power: 12 kW continuous total at 25 C • 3-phase Victron ESS • Suitable for integration with solar panels / solar PV • Battery Management System (BMS) • Professional pre-assembled system • Year of construction: 2026 Applications: Home battery and business energy storage, solar energy storage, increase in self-consumption/self-consumption, peak shaving, load shifting, dynamic energy tariffs and - with a suitable system configuration - emergency power/backup. Victron Energy ESS combines battery storage, inverter/chargers and ene ...

Complete Victron Energy 3-phase ESS home battery and energy storage system with 64kWh LFP (LiFePO4) and 3x Victron MultiPlus-II 3000. Suitable for residential and business applications and can be integrated with an existing or new solar panel/PV installation. System configuration: • 64kWh LFP battery storage • 3x Victron MultiPlus-II 3000 • Inverter power: 9 kVA total / approx. 7.2 kW continuous at 25 C • 3-phase Victron ESS • Suitable for integration with solar panels / solar PV • Battery Management System (BMS) • Professional pre-assembled system • Year of construction: 2026 Applications: Home battery and business energy storage, solar energy storage, increase in self-consumption/self-consumption, peak shaving, load shifting, dynamic energy tariffs and - with a suitable system configuration - emergency power/backup. Victron Energy ESS combines battery storage, invert ...

KUHN Multi-Master 113 4-Scissor Hydraulic Reversible Plow – New and Unused Specifications: Brand: KUHN Manufacturer: KUHN-HUARD S.A.S. Series: Multi-Master 113 Model according to type plate: MM1133E/41102 Serial Number: KHUA1007V00G00562 Version: mounted hydraulic reversible plough Number of scissors: 4 Number of risters: 8, 4 per direction Working width per shear: 35, 40 or 45 cm Total working width: approx. 1,400, 1,600 or 1,800 mm Working width: mechanically adjustable Distance between plough bodies: approx. 1,020 mm Clear height under frame: approx. 750 mm Main frame: 120 × 120 mm Maximum permitted tractor power: approx. 88 kW / 120 hp Total length: approx. 4,300 mm Total width: approx. 2,000 mm Total height: approx. 1,600 mm Maximum working width: approx. 1,800 mm Weight according to type plate: 800 kg Features: 3-point tightening Hydraulic Rolling ...

Ebara EVM 18 12F5 & SAER CVM 131-B/11 multistage centrifugal pumps – 11 & 5.5 kW Specifications: Quantity: 2 vertical multistage centrifugal pumps Ebara EVM 18 12F5 Version: MONO/D/SE Flow rate: approx. 130–400 l/min / approx. 7.8–24 m³/h Head: approx. 188–83 m Maximum head: approx. 194 m Engine power: 11 kW / 15 hp Electric motor: AEG AM160MVA2 Supply voltage: 3-phase, 380–415 / 660–720 V, 50 Hz Speed: approx. 2925 rpm Protection class: IP55 P/N: 3180100012 Serial Number: BG3210620 CE marked SAER Elettropompe CVM 131-B/11 Type: Vertical Multistage Centrifugal Pump Flow rate: 10–22 m³/hr Head: 89–20 m Engine power: 5.5 kW / 7.5 hp Supply voltage: 400/690 V, 50 Hz Current: 11 / 6.4 A Speed: 2900 rpm Protection class: IP55 Weight according to type plate: 68 kg Serial Number: 1982125 CE marked Features: Electric motors Exis ...

Cutting table size approximately: L50250 x W3600mm, equipped with 2x portal cutting machine, 1x machine number: 286.387.09, 8 KVA, equipped with 4 cutting supports (autogenous), with touchscreen control panel, own weight: 2500 kg, 1x equipped with 2x plasma cutting supports, 1x REA-JET coding system and touchscreen control panel, 2x HyPerformance HPR260 plasma sources (on mezzanine); 1x UC technologies DFT4-48 Air treatment installation. Includes 2 chests of drawers with accessories Auction-ID: A1-49889-3

span c.o.h. 5000mm, power: 9 KVA, own weight: 2500 kg, equipped with 5x autogenous cutting supports, 1x touchscreen control panel note: without cutting table Auction-ID: A1-49889-2

Hedge trimmer: Cutting length 430 mm, swivelling, up to Ø 19 mm Lawn trimmer: Cutting width 430 mm, Tap & Go cutting head Brush cutter: 3-stroke blade (Ø 255 mm) Chainsaw: 25 cm Noise level: 109 dB Fuel capacity: 1.2 litres Fuel: 2-stroke oil mixture 50/1 Engine speed: 9500 rpm Idle speed: 3000 rpm Clutch clutch speed: 3910 rpm Maximum power: 1.45 kW Engine 52 cc 2-stroke Speed 3000 - 9500 rpm Fuel type 50:1 Oil mixture Fuel tank volume 1.2 litres Condition: never used / new (5) Auction-ID: A7-50523-823

equipped with 1x cutting table size approximately: L45000 x 4150mm, 1x cutting bed size approximately: L12000 x W4050mm, 1x gantry cutting machine, power 10 KVA, own weight: 2500 kg, 2x plasma cutting support, 1x REA-JET coding system; 2x HyPerformance HPR260 plasma sources (on mezzanine); with touchscreen control panel, 1x UC technologies DFT4-64 Air treatment system. Includes 2 drawer cabinets with accessories. Auction-ID: A1-49889-1

Front Tyre: Manufacturer: Michelin Size: 540/65 R30 Type: MultiBIB Number of holes: 10 Wheel hub diameter: 285 mm Rim Type: Fixed Rim Condition: Used, used on stony ground Rear tyre: Manufacturer: Michelin Size: 650/65 R42 Type: MultiBIB Number of holes: 10 Wheel hub diameter: 285 mm Rim Type: Fixed Rim Condition: Used, used on stony soils Auction-ID: A1-50501-23

Multi-transport trailer 750kg EC 2 axles 1050kg Smooth concrete loading floor made of Finnish birch 12 mm 13-pole European lighting Auction-ID: A3-46128-31080

Set consisting of 96 new multiple sockets, individually packaged in blister packs. Auction-ID: A1-50192-419

Well-kept and comfortable Hobby Optima De Luxe T65 GE mobile home based on a Fiat Ducato 150 Multijet chassis. This modern motorhome combines a stylish look with a practical layout and is ideal for recreational use, holidays or longer trips. The vehicle is equipped with a reliable Fiat 2.3 Multijet diesel engine and has a manual gearbox. The Hobby body is known for its solid finish and comfortable living space. Equipped with Thule Omnistor sun blinds and Thule step, numerous storage options, bicycle rack for 2 bicycles, refrigerator with freezer compartment. The motorhome has a modern two-tone exterior in white and grey with elegant striping. Inside, the vehicle offers a spacious seating area, kitchen, sleeping area and sanitary facilities. Thanks to its practical layout, this mobile home is suitable for comfortable travel with several people. In clean, well-maintained condition with s ...

Capacity 690 litres, forklift mount, hand pump in lockable housing Auction-ID: A1-50529-439

number of spindles:6 spindle passage:22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools!

number of spindles:8 spindle passage:67 mm Cam controlled multi spindle automatic lathe, used 8 main spindles pick up in pos. 8 threading attachment CNC compound slide in pos. 5, also 2. speed in pos. 2 Hydraulic spindle brake in pos. 4 Incl. length measurement, incl. Brankamp cutting force monitoring tooling: could be different like pictures Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control ?Balluff? clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:51 mm Schutte SF51 DNT, yob. 1987, our ID #61868 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF51 DNT Yob: 1987 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=51mm electronic cam control Balluff gripper in position 6 for backworking, sorting chute independent longitudinal feed layer 5 screw chip conveyor Tapping couplings Interface for: Bar feeder IEMCA PRA Bar feeder IEMCA PRA40/33/F Scope of delivery without the blue chip conveyor The tooling will differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 Dnt Yob: 1993 eight-spindle automatic lathe eight main spindles for bars up to D=32mm Modernized control: Siemens Sinumerik Motors: renewed modern motors suitable for modernized control system Electronic trip dog control: Balluff CNC cross slide position 5 cross CNC cross slide position 6 cross Preparation for gripper in position 8 (gripper optional) Independent feeds Thread cutting couplings integrated bar loader: Pietro CUCCHI; type: rack type magazine The scope of delivery regarding the tooling equipment could be different like pictures.

number of spindles:9 spindle passage:46 mm Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SC9-46 Yob: 2016 Six-spindle automatic lathe with 6 main spindles with max. nominal throughput D=46mm and 3 counter spindles Main spindles: 6 motor spindles D46mm, 5. 000 rpm, 35 Nm to 80 Nm Cross slide units, transverse: 6 units, in positions I to VI, Slide units, longitudinal: 5 units, in positions I to V, Slide units, longitudinal: 5 units, in positions I to V, Counter spindles: 3 units, one each in positions VI, VIII and IX, 7. 500 rpm Cross slide units, transverse: 2 units, in positions VIII and IX, Control: Siemens SINUMERIK 840SL with double NCU Software: Schütte SICS, Sinomerik Operate 4.5, Safety Integreted, Spindle coupling package ?CP-Expert?, for up to 8 spindle couplings (maximum expansion) Synchronous action package ?Level? 2, incl. cross-mode actio ...

number of spindles:6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SFH130 Yob: 1995 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC Dnt drive loading and disloading in position 6 additional cooling pump with magnetic spark plug filter Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SG18 Yob: 1999 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC loading and disloading in position 6 spindle brake Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF20 S Dnt Yob: 1999 Six-spindle automatic lathe with 6 main spindles max. nominal diameter: D=20mm Spindle drum hirth coupled, CNC cross slide in positions 4, CNC cross slide in positions 5, pick up in position 6, sorting chute, 1x independent feed, thread cutting couplings, workpiece belt, Coolant tank with hinged belt chip conveyor Ruez, Oil/steel operation, PLC Siemens S7, Siemens CNC control, Siemens Simodrive 611, The scope of delivery regarding the tooling equipment could be different like pictures. Interface for: IEMCA PRA bar loading magazine (optional: IEMCA PRA40/31/ built in 1997 rear loader)

number of spindles:6 spindle passage:36 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=36mm! Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images; various collets are included in delivery up to D36mm Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2001 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

spindle passage:36 mm Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: A36PC Yob: 2005 Loading magazine by Pietro Cucchi Knoll unit 7 radial cross-type carriages 2 additional speed motors in 4th and 5th positions 2 additional speed motors for front spindles in position D (pick-up) and B (for front motorized spindle) 1 polygon cutter 1 motorized front spindle 1 radial motorized in position IV for cross-type carriage 1 radial motorized in position V to be mounted on X-type carriage only (no cross-type carriage) 1 straight head for motorized position IV 1 90-degree tilted head for motorized position IV 1 tilt-adjustable head for motorized position IV Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AFH130 with CNC Yob: 1990 eight-spindle automatic lathe 8 main spindles Chucker AFH130 for complete machining means front- and back side Control Siemens Sinumerik 840DI complete revising and new configuration of this machine in year 2010. loading arm, for loading and disloading Workpiece turn around station in pos. 4 position 4 with workpiece length control CNC compound slide in pos. 5 coolant pump with magnet candle filter delivered tooling: could be different like pictures option: Ergomat TBF42 for cutting off for half finnishing with FMB-Turbo Visiting under production condition is possible Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com