We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,261 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Manufacturer: G?kkaya Machinery Model: AKO?WALL EX KDH 10W Year: 2007 Type: Wall-mounted dissolver ATEX classification: Ex 1/2GD cEx dem IIAT3 Weight: 500 Kg Diameter of mixing rotor: ? 200 mm Shaft length : 985 mm Up/down stroke: 1150 mm Raise/lower: hydraulic Sew Eurodrive unit: 1.5 Kw Loher motor: 7.5 KW
used
Te Coop: Rheonik Field mount transmitter RHE11 - 230 vac type 1
used
Fuji Full Leg Spine Mount Tripod (mobile) with Fuji LongView Cassette (LC) 35.4x124.5 cm
used
Carestream (Kodak) Full Leg Spine Mount Tripod DirectView CR with 4 Kodak GB cassettes • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
used
Panel mount gauge set, panel panel gauge with moving coil gauge WEIGEL PQ72K scale range: 0 - 600 A Measuring range: 0 - 60 mV Accuracy class : 1.5 Built-in gauge set consists of 2 gauges ! unused ! Dimensions(single gauge): 72 x 58 x 72 mm Dimensions: 190 x 85 x 80 mm
used
Panel mount gauge set, panel panel panel gauge with moving coil gauge AMS SQ72DS 019020200 scale range: 0 - 600 A Measuring range: 0 - 60 mV Accuracy class : 1.5 IP54 built-in gauge set consists of 2 gauges ! unused ! Dimensions(single gauge): 72 x 50 x 72 mm Dimensions: 160 x 85 x 75 mm
used
Panel mount gauge set, panel panel gauge with moving coil gauge AMS SQ72DS 19010200 scale range: 0 - 100 V Measuring range: 0 - 100 V Accuracy class : 1.5 IP54 Built-in gauge set consists of 3 gauges ! unused !; Dimensions(single gauge): 72 x 50 x 72 mm Dimensions: 240 x 85 x 75 mm
used
Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Eroglu, milling mount surface chuck SK40 -Type: SK 40-12-50 DIN 2080 01150P500688 -Milling tool holder: Ø 12 mm -Dimension: Ø 63 x 144 mm -Weight.: 1.0 kg
used
Tool holder, milling holder, collet holder, collet chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, milling mount SK30 -Type: NCGFLK 100-A30 -Price/delivery: complete -Total dimensions: 200/50/H130 mm -Weight.: 2.5 kg
used
Collet holder, tool holder, tool holder, milling holder, milling tool, short-shaft system -Manufacturer: DEPO, milling mount SK50 -Type: 100 5 77 -Milling tool holder: conical, Ø 34/24 mm M16 -Dimension total Ø97x385mm -Weight: 5.9 kg
used
Pressureless dust dilters für mounting on top of silos, material bunkers etc. in mild steel design. Equipped with 20 pcs. textile filter tubes (each 200 mm Ø x 2.000 mm long), incl. elektrical vibration device for cleaning. Filtering surface: Ca. 25 m². In very good condition, several filters available (identical).
new
We sell a complete package from bearing resolution. Mounting material for photovoltaic systems open space The following positions are included in the package: Central Terminal profiles, end clamp profiles, potential balancing ropes, Checker Advancende DC70A cabinets (GAK passing element, fully assembled), connection profiles (profiles), solar cables. It's new product. We will send you a detailed statement you request. Price on request.
used
Krings Verbau various base plates with mounting plate dimensions, spindles, etc. in the package or individually for sale Mass and guide can be requested to e-mail Price VB
new
; neu, sofort lieferbar
used
used
used
14-speed mounting screwdriver AC, for cylinder head mounting etc. Next: 3 spindle assembly screwdriver AC 3 and 6-spindle screwdriver ATLAS-COPCO 2 spindle screwdriver AC 3 spindle assembly screwdriver SPS & AC 1 spindle assembly screwdriver SPS
used
2-fold mounting screwdriver PLC, for adaptations etc.
used
Aseptic capping machine -Capacity: 7000-12000 packs per hour -Pack size: 0,5L, 0,75L and 1L also angle mounting.
used
Column-Mounted Crane DEMAG Capacity 500 kg Arm travel 3400 mm Manual arm rotation Column height 3000 mm Column base diameter 700 mm - with base discs (see photo) Electric hoist I beam dimensions: 220 x 100 mm (see photo) Total weight approx 2 T MACHINE IN OUR STOCK IN FRANCE.
used
Column-Mounted Crane VERLINDE type XC2 Capacity 500 kg Column Ø 250 mm Column height 4400 mm Height under arm 3700 mm Trolley useful length 2700 mm Delivery with one fixing plate Ø 810 mm (see photo) Weight Total weight approx 2 T MACHINE IN OUR STOCK IN FRANCE.
used
Mounting table with cooling, cooling table used Manufacturer unknown cooled area: approx. 1270 x 690 mm Total dimensions 1400 x 800 x 770 mm The table consists of two solid steel plates, presumably straightening plates made of cast iron. On the lower table are mounted 8 cooling elements that protrude into the ribs of the upper table. The upper table is covered with stainless steel sheet. Cooling is probably done by nitrogen. The table was probably used in joining shrinkage e.B. gearbox mounting Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
new
Used Hydropneumatic Press / Assembly Press - Pressing force 10 KN (1 to) - Used hydropneumatic cylinder make TOX - Pneumatic two-hand control - Portal frame aluminum profile 90 90 mm - Machine table made of aluminum profiles and multiplex plate 700 700 mm - Total weight approx. 50 kg Suitable as an assembly press for insezing components. With x- and y-adjustment alignable vice for die diameters up to 80 mm. Or for small punching or embossing tools. All tools or vices are quickly changed through the groove system.
used
arm length: 4000 mm weight max. in kg: 500 kg swivelling range: 180 Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m with wall bracket The techn. Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions apply. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
arm length: 4000 mm weight max. in kg: 500 kg swivelling range: . Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 44 with wall bracket The techn. Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions apply. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
; Gross weight [kg]: 1980; Inspection Date: 2024-02-28; Amount of previous owners: 1; Lift height[mm]: 1400; Maximum lift capacity [kg]: 200
used
used
; Gross weight [kg]: 3500; Accessories: Diesel-Motor; Inspection Date: 2024-03-18; Amount of previous owners: 1; Lift height[mm]: 2800; Maximum lift capacity [kg]: 200
used
Cabine
used
Control cabinet, distribution cabinet, control cabinet, TS modular cabinet -Mounting plate for: control cabinet -Dimensions: 1895/500/22 mm -Weight: 28 kg
used
; Gross weight [kg]: 3500; Rear tyres remaining: 100; Front tyres remaining: 100; Lift height[mm]: 1570; Maximum lift capacity [kg]: 300
used
; Gross weight [kg]: 2100; Inspection Date: 2023-12-16; Amount of previous owners: 1; Lift height[mm]: 1600; Maximum lift capacity [kg]: 200
used
; Gross weight [kg]: 2475; Rear tyres remaining: 93; Front tyres remaining: 91; Inspection Date: 2023-10-06; Amount of previous owners: 1; Lift height[mm]: 1900; Maximum lift capacity [kg]: 215
used
; Gross weight [kg]: 1950; Inspection Date: 2024-01-02; Amount of previous owners: 1; Lift height[mm]: 1600; Maximum lift capacity [kg]: 200
used
; Gross weight [kg]: 1975; Inspection Date: 2024-01-20; Amount of previous owners: 1; Lift height[mm]: 1600; Maximum lift capacity [kg]: 200
used
MAN 32.322 chassis, year of construction 1993, 242,000 km, pump Putzmeister 17.50 m with radio remote control, good condition
used
Type M, Factory No. 15864 Load capacity 3200 kg Projection 4000 mm UK beam 4820 mm YOC 1998 engine. Pan 360 degrees Chain hoist Liftket YOC 2014 type 3200/ 2-5/1,25 Factory No. E 33594 With motor. Chassis EF 320 , 24 V Prufbuch, acceptance examination etc. Crane was dismantled on 30.11.2022
used
; Mileage [km]: 52000; Gross weight [kg]: 3500; Accessories: Kasperl (= Blink-Leuchte am Fahrerhaus); Inspection Date: 2024-02-28; Amount of previous owners: 1; Working width [cm]: 227; Lift height[mm]: 1570; Maximum lift capacity [kg]: 300
used
used
; Gross weight [kg]: 925; Inspection Date: 2024-03-06; Amount of previous owners: 1; Lift height[mm]: 850; Maximum lift capacity [kg]: 120
used
arm length: 5500 mm total column height: 3200 mm weight max. in kg: 2000 kg height: 3900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m K9F 0902 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
; Gross weight [kg]: 2450; Inspection Date: 2024-03-18; Amount of previous owners: 1; Lift height[mm]: 2300; Maximum lift capacity [kg]: 200
used
; Gross weight [kg]: 3500; Accessories: Kasperl, Bordwand, ...; Inspection Date: 2024-03-18; Amount of previous owners: 1; Working width [cm]: 230; Lift height[mm]: 1510; Maximum lift capacity [kg]: 220
used
; Gross weight [kg]: 2475; Inspection Date: 2024-03-18; Amount of previous owners: 1; Lift height[mm]: 1900; Maximum lift capacity [kg]: 215
used
; Mileage [km]: 15022; Gross weight [kg]: 3500; Inspection Date: 2024-04-15; Amount of previous owners: 1; Maximum lift capacity [kg]: 250
used
; Gross weight [kg]: 3500; Inspection Date: 2024-04-15; Amount of previous owners: 1; Maximum lift capacity [kg]: 200
used
; Gross weight [kg]: 2170; Inspection Date: 2024-04-19; Amount of previous owners: 1; Maximum lift capacity [kg]: 220
used
Column-mounted slewing jib crane DEMAG type KBK 100 Year of construction approx. 2008 Load capacity 80 kg Swivel range 270 Projection 2500 mm Construction height 1980 mm Height to lower edge Boom 1580 mm- Crane column KBK 100- Boom profile DEMAG C-profile sill KBK 1 - Base plate L x W x H = 260 x 260 x 25 mm (4 holes 18 mm ) - yellow lacquered Net weight approx. 100 kg good condition; used
used
arm length: 5500 mm total column height: 3600 mm weight max. in kg: 2000 kg height: 4100 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m K9F 0902 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used