moto fork lift used for sale

Description: fork length: 1800 mm + 2000 mm Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 300 mm, weight approx.: 150 kg

Linde forklift, electric powered, 4 forks, fork length: 1200 mm, total dimensions: 3900 mm x 1200 mm x 2300 mm. With battery charger, serial number: 0387612-0010-001, year of construction: 2012.03.

Description: Diesel forklifter with cabinet Lifting attachment: Manufacturer Rightline Type KEM 123 Torkwidth: 150 mm including sideshift and fork adjustment Motor: Manufacturer Deutz Type TCD 4.1 L4 Attention: The engine was overhauled by a service company in 2021. Due to a internal restructuring, the forklift has been used since then just a few hours. The air conditioning system is not operational and the exhaust aftertreatment system should be checked and repaired if necessary. length of forks: 1,500 mm, Approx. Onsite Dimension. (l x w x h): 5,000 x 2,250 x 2,800 mm, weight approx.: 14,100 kg

Description: Unused internal charger built in 220 volts interchangeable battery pack 4th function available led street lights and work lights Approx. Onsite Dimension. (l x w x h): 3,780 x 1,060 x 2,210 mm, weight approx.: 4,570 kg

Description: serienummer: 130211057 electric: yes number of wheels: 4 lifting capacity: 2500 kg height: 4800 mm spoon length: 1200 mm triple mast: yes free lifting: yes side-shift: yes full rubber tires: yes read hours: 0 battery charger: yes net weight: 3830 kg overall dimensions L: 2503 mm overall dimensions W: 1150 mm total dimension H: 2220 mm description: unused Li-ion battery 4 free hydraulic functions to forkboard Approx. Onsite Dimension. (l x w x h): 2,503 x 1,150 x 2,220 mm, weight approx.: 3,830 kg

Description: 4 hydraulic functions to forkboard. built-in charger on 220 volts forks 1200mm Approx. Onsite Dimension. (l x w x h): 3,140 x 1,050 x 2,150 mm, weight approx.: 3,210 kg

Description: 4 hydraulic functions to forkboard. built-in charger on 220 volts forks 1200mm Approx. Onsite Dimension. (l x w x h): 3,140 x 1,050 x 2,150 mm, weight approx.: 3,210 kg

Description: Unused 4th hydraulic function li-ion battery Approx. Onsite Dimension. (l x w x h): 1,800 x 1,060 x 2,030 mm, weight approx.: 2,400 kg

Description: Unused internal charger built in 220 volts interchangeable battery pack 4th function available led street lights and work lights Approx. Onsite Dimension. (l x w x h): 3,780 x 1,060 x 2,210 mm, weight approx.: 4,570 kg

Description: serienummer: 131130313+ electric: yes number of wheels: 4 lifting capacity: 3500 kg height: 4800 mm spoon length: 1200 mm triple mast: yes free lifting: yes side-shift: yes full rubber tires: yes read hours: 0 battery charger: yes net weight: 5000 kg overall dimensions L: 2850 mm overall dimensions B: 1200 mm total dimension H: 2250 mm Description: unused forklift with lithium battery with battery charger 4th free hydraulic function up to fork board. Approx. Onsite Dimension. (l x w x h): 2,850 x 1,200 x 2,250 mm, weight approx.: 5,000 kg

Description: electric: yes number of wheels: 4 lifting capacity: 3000 kg height: 4800 mm spoon length: 1200 mm triple mast: yes free lifting: yes side-shift: yes full rubber tires: yes read hours: 0 battery charger: yes net weight: 4280 kg overall dimensions L: 2900 mm overall dimensions W: 1250 mm total dimension H: 2170 mm description: unused 4th function to the li-ion battery charger Approx. Onsite Dimension. (l x w x h): 2,900 x 1,250 x 2,170 mm, weight approx.: 4,280 kg

Description: Nominal capacity 1500 kg ,, A 500 mm B 3030 mm , Weight without battery 2380 kg Battery weight 700 kg Fork length 1500 mm , Including charger : Manufacturer EB, D400 g 48 / 80 B1 - FML Puls , Battery charger 48 Volt UE 400 Volt IEM 8,0 Ampere 50-60 Hertz A truck with an access ramp will be ordered for collection Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 2,000 mm, weight approx.: 3,030 kg

Description: STIPP Li-Ion forklift model CP15 (1500 kg), duplex mast, lateral movement, lithium batteries, equipped with internal quick charge charger, lifting height 3 meters, never used, 0 hours UDEM certification without CE documentation Approx. Onsite Dimension. (l x w x h): 3,000 x 900 x 2,100 mm, weight approx.: 2,500 kg

Description: Electric Forklift. Rated capacity:1000kg. Load center:500mm. Lift height:3000mm. Fork size:35×120×920mm. Overall width:1090mm. Mast lowered height:1995mm. Mast extended height:4042mm. Overhead guard height:2199mm. Min. turning radius:1894mm. Travel speed :11/13km/h. Service weight:3060kg. Wheelbase:1250mm. Battery: 60V/120Ah The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 2,050 x 1,100 x 2,100 mm, weight approx.: 2,000 kg

Description: STIPP Li-Ion forklift model CP15 (1500 kg), duplex mast, lateral movement, lithium batteries, equipped with internal quick charge charger, lifting height 3 meters, never used, 0 hours UDEM certification without CE documentation Approx. Onsite Dimension. (l x w x h): 3,000 x 900 x 2,100 mm, weight approx.: 2,500 kg

Description: Size 1500 x 750 x 500 mm, fork hole size 130 x 52 mm, metal structure Approx. Onsite Dimension. (l x w x h): 1,500 x 750 x 500 mm, weight approx.: 100 kg

Description: serial number A40400688 operating hours 40.455 h lifting capacity 16.000 kg maximum lifting hight 5000mm mast type duplex 4 operations lift / tilt / sideshift / levelling cylinder dimensions of forks 2500 x 350 x 80 mm pneumatic wheels front axle 4x 12.00R20 rear wheels rear axle 2x 12.00R20 engine: Cummins engine QSB 6.7 168 /2200 kW/rpm Tier IV, stage four starting batery 2x12 v/ 150Ah, alternator 1960V/A torque 945-1500 Nm/rpm with Adblue system Dafo extinguisher system transmission: ZF - 3WG171, torque converter gearbox: hydrodynamic Powershift , number of gears forward/reverse 3 / 3 driving axle : Kessler D81- diferential and hub reduction steering: hydraulic servo - steering weel breaks: service brake system – oil cooled disc brakes - drive w parking brake system – dry, spring activated disc brake – drive wheels cabin: with AC system hydrauli ...

Description: serial number F006A10955X working hours 5767 hours , fork lenght 1800 mm , lifting capacity 6600 kg , lifting height 5400 mm , nominal power 61.5 kW , tires front 8.25 x 15 , dual solid rear tires 8.25 x 15 , solid engine Perkins , serial number AR70417U115570G Read off operating hours: 5,767 h, serial number: F006A10955X, loading capacity: 7 to, Vehicle identification number: AR70417U115570G, lifting height: 4,300 mm, length of forks: 1,800 mm, Approx. Onsite Dimension. (l x w x h): 5,500 x 2,100 x 3,250 mm, weight approx.: 10,280 kg

Description: Attention: A vehicle with an access ramp is required for loading! Drive type: LPG Load capacity: 3.3 t Duplex full free lift mast FFT 3230 Lifting height: 3,230 mm Overall height retracted: 2,185 mm Free lift: approx. 1,475 mm Forks: 1,200 mm Oil-cooled disk brakes Further information: Brake actuation fully hydraulically assisted Continuously variable automatic transmission, electro-hydraulic Water-cooled Mitsubishi LPG engine, 4 cylinders Fully hydrostatic power steering Tires: 4-way superelastic, tire condition good (see photos) Approx. Onsite Dimension. (l x w x h): 2,500 x 1,300 x 2,150 mm, weight approx.: 5,750 kg

Description: Max. load capacity: 5500 kg Fork length: 2000 mm Lifting height: up to approx. 4000 mm Please note: due to sporadic loading, the forklift truck can only be collected at the end of the collection period Attention: a truck with access ramp is required for transportation Read operating hours: 1891 Approx. Onsite Dimension. (l x w x h): 5,500 x 1,500 x 2,800 mm, weight approx.: 7,000 kg

Description: Serial number : C83670317 Double mast Minimum clearance height: 3100 mm Fork length : 1200 x 125 mm Displacer Hours according to counter : 6002 ,h Charger not included To be checked, the cam system works but does not reach the maximum height. loading capacity: 3,500 to, Approx. Onsite Dimension. (l x w x h): 4,100 x 1,430 x 3,100 mm, weight approx.: 6,175 kg

Description: Serial number : B83680379 Double mast Minimum clearance height : 3100 mm Fork length : 1200 x 125 mm Total lift : 5400 mm Hydraulic tipping system, brand CEBRIA Displacer Batteries changed in 2022 Charger included Fuel: Diesel Hours according to meter : 17038 h loading capacity: 3,500 to, lifting height: 5,400 mm, battery and charger available: si, Approx. Onsite Dimension. (l x w x h): 4,100 x 1,430 x 3,100 mm, weight approx.: 6,175 kg

Description: Electric forklift Serial number 861397 Maximum load capacity: 2500 kg Maximum lift height: 4000 mm Minimum passage height: 2180 mm Fork dimensions: 1200 x 100 x 40 mm Triplex mast Solid wheels Front accessory for fork turning 80 V battery Charger and accessory battery included The machine cannot be started because the contact is broken. , loading capacity: 2,500 to, battery and charger available: Si, Approx. Onsite Dimension. (l x w x h): 3,900 x 1,330 x 2,180 mm, weight approx.: 4,500 kg, mast type: Tríplex, charging voltage: 80

Description: Diesel forklift Serial number 100417135 Maximum load capacity: 2500 Kg Maximum lift height: 4920 mm Minimum passage height: 2250 mm Fork length: 1300 x 100 x 40 mm Triplex mast Solid wheels 3 operations Fork rotation attachment included Blue-Spot Fuel: Diesel Working hours according to meter: 8083 h loading capacity: 2,500 to, lifting height: 4,920 mm, Approx. Onsite Dimension. (l x w x h): 4,300 x 1,200 x 2,250 mm, weight approx.: 4,200 kg

Description: Steering cylinder seal kit was replaced in Feb. 2024. The UVV inspection was carried out at the same time. Serial number: E1X353P00484 Load capacity: 6000 kg Operating hours: 26125 (may still change slightly) Lifting height: 4500 mm Forks (LxWxH): 1200 x 200 x 50 mm Included: Matching fork extension: Fork length: 2400 mm Fork width: 230 mm Fork height: 80 mm Steel wall: 8 mm Internal dimensions width / height: 215 / 64 mm Soot particle filter Fork positioner Sideshift New UVV test Read off operating hours: 26,125 h, serial number: E1X353P00484, loading capacity: 6 to, lifting height: 4,500 mm, length of forks: 1,200 mm, Approx. Onsite Dimension. (l x w x h): 4,700 x 2,000 x 3,200 mm, weight approx.: 10,500 kg

Operating voltage: 12 ... 35 V DC; Open circuit current (max.): 35 mA; Insulation dielectric strength: 500 V; Leg length inside: 80 mm: Case dimensions: 110 x 115 x 10 mm; Case length: 115 mm; Case height: 110 mm; Case width: 10 mm; Housing material: Aluminum (black, anodized) Principle of operation: Optical; Evaluation: digital, difference; Design: Fork; Switching output: pnp, 200 mA, NO/NC, switchable; Voltage drop (max.): 2.5 V; Light source: LED; Color: Infrared; Modulation: unclocked; Ambient light safety: 5 kLx; Fork width: 90 mm; Resolution: Ø 0.25 mm; Switching hysteresis (max.): 0.2 mm; Reproducibility: 0.01 mm; Sensitivity Setting: Potentiometer; Switching frequency: 5000 Hz; Connection: Plug, M8, 3-pin

Operating voltage: 10 ... 30 V DC; Open circuit current (max.): 30 mA; Insulation dielectric strength: 500 V; Inside leg length: 55 mm; Case dimensions: 100 x 80 x 10 mm; Case length: 80 mm; Case height: 100 mm; Case width: 10 mm; Housing material: die-cast zinc (black, powder-coated); Principle of operation: Optical; Evaluation: digital; Design: Fork; Switching output: push-pull, 100 mA, NO/NC, switchable; Interface: IO-Link (V1.1, COM2 38.4 kBd, Smart Sensor Profile); Light source: LED; Color: Red; Modulation: clocked; Fork width: 80 mm; Resolution (factory default): 0.3 mm (STANDARD); Reproducibility (factory setting): 0.02 mm (STANDARD); Resolution (STANDARD): 0.3 mm; Reproducibility (STANDARD): 0.02 mm; Resolution (HIGH RESOLUTION): 0.2 mm; Reproducibility (HIGH RESOLUTION): 0.02 mm; Resolution (POWER): 1 mm; Reproducibility (POWER): 0.02 mm; Resolution (SPEED) ...

Operating voltage: 10 ... 30 V DC (Supply Class 2); Open circuit current (max.): 30 mA; Insulation dielectric strength: 500 V; Inner leg length: 60 mm; Case dimensions: 144 x 90 x 12 mm; Case length: 90 mm; Case height: 144 mm; Case width: 12 mm; Case Material: Die-cast zinc (powder coated); Material: Mineral glass (optics); Principle of operation: Optical; Evaluation: digital; Design: Fork; Switching output: push-pull, 100 mA, NO/NC, switchable; Interface: IO-Link (V1.1, COM2 38.4 kBd, Smart Sensor Profile); Light source: LED; Color: Red; Wavelength: 660 nm; Modulation: clocked; Fork width: 120 mm; Resolution (factory default): 0.5 mm (STANDARD); Reproducibility (factory setting): 0.02 mm (STANDARD); Resolution (STANDARD): 0.5 mm; Reproducibility (STANDARD): 0.02 mm; Resolution (HIGH RESOLUTION): 0.3 mm; Reproducibility (HIGH RESOLUTION): 0.02 mm; Resolution (P ...

New lift elevator motor because a insolvency to a special price - Manufacturer: LOGOS Innovationen GmbH - Type LDS-320 - Asynchronous motor 15KW Manufacturer EMOD - Belt drive 4 belts - Speed 1m / s - Suspension 2: 1 - Payload 1250 Kg - 2 magnetic brakes from Mayr 2x550Nm braking force - including test protocol

Mec 2047ES Scissor Lift 4 x new Crown Deep Cycle lead-acid batteries CR-225 HD (as of 06.10.2023) Brand: MEC Model: 2047ES Type: Scissor Lift Year of construction: 2006 Working height max. 8.10 m Platform height max. 5.98 m Platform height – retracted 1.62 m Platform extension 0.91 m Platform width – outside 1.15 m Platform length - outside 2.31 m Platform length - extended outside 3.39 m Railing height 1.10 m Height of skirting board 0.15 m Height – retracted: Folding railing 2.10 m Height – retracted: railing folded down 1.62 m Length - retracted 2.51 m Length - with extended platform extension 3.33 m Width 1.19 m Achievement Max. people on the platform (indoor/outdoor) 2/2 Load capacity 567 kg Load capacity - platform extension 113 kg Movable up to a height of 5.98 m Travel speed - retracted 4.0 km/h Travel speed - extended 1.0 km/h Gradea ...

properties: Used lifting table of the manufacturer Büter Condition: fully functional with signs of use Ideal for fast material transport Expertly dismantled and packaged 2 pcs available Price per piece specifications: Dimensions of the roller conveyor Manufacturer: Büter Type: H15-20 Model: BB2 1500/3 PL Machine No.: WB1005148 Drive type: Hydraulics Year of construction: 2010 Net weight: 2.500Kg Nominal load: 1.500Kg Total length: 2.620mm Total width: 1.350mm Roll width: 1.170mm Roller axle spacing : 155mm Diameter approx.: 80mm Total height retracted: 475m,m Material: steel, galvanized Color: Red / Light Gray Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt tracks, inclined conveyors or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or a ...

Sweden made hydraulic scissors table. Manufacturer: Trans Lyft Type: TLH 1000 Year of construction: 1982 Weight Capacity: 1000 kg Overall Size while fully opened: 3400 x 620 x 1100 mm Overall Size while fully closed: 3400 x 620 x 255 mm Base size: 2600 x 600 mm Lifting surface: 3400 x 620 mm Max lifting height: 1000 mm

Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic power unit)Year of construction 1991 Nominal load capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mm Stroke max. 930 mm Construction height - bottom 100 mm (with installation frame) Construction height - top 1030 mm Hydr. Operating pressure 350 bar = lifting capacity 1000 kg Hydraulic engine power 1.5 kW Mains connection 400 volts, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is actuated - without hydraulic power unit - without electrical control Length of mounting frame 2270 mm Width of installation frame 1580 mm Height of installation frame = height below 100 mm Dead weight Lifting table 500 kg good condition; used

AT-Motor Lombardini Type=LDW1204 general-overtaken in exchange.Deutz-Type=F4M1008 email= info@miw-zeven.de

Gearmotor Bauer DK940 AH/241 - used - MANUFACTURER´S DATA Bauer DK940 AH/241 output: 2,0 PS Motor speed: 1400/121U/min tension: 380Δ/Y protection class: IP65 shaft: 25mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach

technical data: Make: Loher Type: A 200L2A-2 Type No: 6889273 Connection: Star 380 V / 70 A kW: 37 kW Rpm: 2955 rpm Note: Runner DS-4

technical data: Make: Loher Type: A 180 MA-2 Types No:: 6239319 Connection: Star 380 V / 42 A kW: 22 kW Rpm: 2930 rpm Note: Size 180 / Runner DS-5

10 pieces of engine with gear without generator and starter construction year 1990 - in 1998 Nissan Primera, Almera, Sunny, Micra, Blubird parcel price

We offer a general overhault exchange engine with 12-month guarantee with starter+altenator . We are an Agco Sisu diesel service partner and obstruct / sell only original spare parts. Please contact us: MIW GmbH Motoren Instandsetzungs Werk Nord West Ring 8 D-27404 Zeven-Germany Tel:0049 (0) 4281-950583 Fax:0049 (0) 4281-950585 e-mail: info@miw-zeven.de abc. miw-zeven.de

2 Motor driven conveying systems (Vibration) - 1400 mm x 1000 mm each. Each unit is driven by 2 motors

We offer complete recondioned Scania engines in exchange

ABB electric motor System: electric motor Condition: pre-owned Manufacturer: ABB Product code: 3GJP181410-ADG Year of construction: 2008 IP: 55 KW: 22 Speed: 2938/RPM HZ: 50 Weight: 200 kg

SEW-motors with gearbox v. 1, 5kW - 15kW.Die engines have been used mint condition and never.Visits by appointment at any time.

3 Phase brushless servomotor Never used! For all technical data please see pictures

Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.

Geared motor 2.2 kW gear motor 2.2 kW

Load capacity up to 25,000 kg Grab content from 0.5 m² up to 4 m² Make: various renowned manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.

Flat gear brake motor Gear motor Manufacturer: DEMAG Type: KBA112 B12/4 / KBA112B12 / 4 Detailed information on the manufacturers page, see pictures. Condition: New, can have traces of camp, comes from stock. Scope of delivery: see the pictures.

E engine durchfl. Water cooled Three-phase asynchronous motor Manufacturer: ELIN Model: MKH-435 K04 Z9Z Performance: 315kw Supply: 400 V Revolutions: 1336/min Weight: 1700kg NEW, original box, unused from old stock for further details please refer to the pictures.

E engine Three-phase asynchronous motor Manufacturer: VEM Model: K21R 315 MX4 Power: 160kw Supply: 400 V Revolutions: 1480/min Weight: 1000kg NEW, original box, unused from old stock for further details please refer to the pictures.