mori seiki lathe used for sale

Tool holder type:Spannzange / Collet ER 25 Tool holder shaft type: ISO 15488-25-A Shank diameter:40 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar 90° angle rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

x-travel:800 mm y-travel:460 mm z-travel:510 mm weight of the machine ca.:8 t Vertical Processing Centre

X-travel: 100mm, z-travel: 220mm, max. rotational speed: 5000/min, number of workpiece positions: 14, max. swing: 348mm, max. turning diameter: 150mm, controls: Mitsubishi M730 UM, operational hours counter: 4635h, with handling and fire extinguishing system.

Key data: 356 mm, 705 mm

Machine Details Stock-No. 1105-03951 Type of machine CNC Lathe Make MORI SEIKI Type NL 2500 /700 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU Country of origin Japan Delivery time to be agreed Freight basis ex site Technical details turning diameter 356 mm turning length 705 mm control MSX-850 II MAPPS X-Axis 260 mm Z-Axis 795 mm power capacity - main spindle 18,5/15 kW Speed Mainspindle 3300 min/-1 Spindle Bore 91 mm spindle nose JIS A2-8 chuck Kitagawa B-212A8 mm max. chuck pressure 3.1 MPa number of toolpositions 12 pos. Shank diameter 50 mm Shank height for square tool 25 mm turret change time 0,25 sec. rapid power traverse in X-and Z direction 30 m/min rapid travel tail stock 7 m/min total power requirement 27,6 kW Weight of the machine approx. 5.8 t dimensions of the machine approx. 3.1 x 2 x 2.2 m Accessories Documents  ...

Key data: 330 mm, 400 mm

Machine Details Stock-No. 1105-03952 Type of machine CNC Turning- and Milling Center Make MORI SEIKI Type DURA TURN 310 ECO Year of manufacture 2010 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis ex stock Technical details turning diameter 330 mm turning length 400 mm control MSX 853 MITSUBISHI WITH M Swing Dia. 400 / 300 mm rapid power traverse in X-and Z direction 18/24 m/min Travel x/z 160 / 450 mm Bar Material Dia. 51 mm spindle drive 13.5 kW Spindle RPM 50 - 5000 U/min Spindle Torque 143 Nm spindle nose JIS A2-5 Turret positions 12 / 6 work piece power 3.7 kW RPM of rotary tools 4000 U/min tailstock quill taper MT 4 Tailstock Quill Stroke 80 mm tailstock quill diameter 75 mm Tailstock Travel 450 mm total power requirement 25 kW Weight of the machine approx. 3.9 t dimensions of the ...

Key data: 1050 mm, 560 mm, 560 mm

Machine Details Stock-No. 1105-03956 Type of machine Machining Center - Vertical Make MORI SEIKI Type MV 55 Year of manufacture 1991 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis ex site Price Technical details x-travel 1050 mm y-travel 550 mm Z-Travel 560 mm control FANUC O M table-size 1,400 x 550 mm max. table load 1500 kg turning speed range - milling 6000 rpm tool taper BT 50 Tool changer 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 12 kg power capacity - milling spindle 7,5 / 11 kW rapid traverse X-axis 15 m/min rapid traverse Y-axis 15 m/min rapid traverse Z-axis 12 m/min Feed 0.001 ~ 5.000 mm/min spindle bearing diameter 100 mm total power requirement 35 kW weight of the machine approx. 10 t dimensions of t ...

X axis movement : 800 mm Y axis movement : 510 mm Z axis movement : 510 mm There is a 4 axis divider ( Nikken) Table size 1100/600 Spindle taper BT40 Books are available Machine has been worked only on aluminum Machine is in good condition

Double table Simultanous 5 axis X x Y x Z: 555 x 400 x 460 Diameter x Length: 500 x 300 B, C axis: 0.001 degree B axis: -10, + 120 degree Spindle: 15000 rpm Magazine: 41 pieces HSK 63 (50 pieces holder available)

DMG Mori DMU 50 Ecoline 5 axis machining center Machine is in good working condition 10,000 RPM DirectDrive engine Control Unit HEIDENHAIN TNC620 32 Sets of Magazines Tool measuring probe . Chip conveyor . Tool measuring probe . It has automatic track reset feature. It has been serviced by DMG service. Since we know the history of the machine, the previous operations are as follows. -B axis Brake changed -Z axis Ball Screw changed -Y axis Slide + Car ball screw has changed. -Y axis ruler changed. We have all the service records

Key data: 700 mm, 750 mm

Machine Details Stock number 1105-03959 Machine Type: CNC Lathe Make MORI SEIKI Type NLX 4000 YA /750 Year of construction 2018 CNC control type Control mitsubishi 730 m celos Location: HAGUENAU FRANCE Country of origin: Japan Delivery time ON REQUEST Cargo base EX WORK Technical details Turning diameter 710 mm Turning length 750 mm Control mitsubishi 730 m celos Turning diameter over bed 620 mm Turning diameter above the face carriage 370 mm Center width 750 mm Travel - x 365 mm Travel - z 955 mm Spindle speeds 2000 rpm Spindle bore 145 mm Turret (x-speed) 12-fold Shaft cross-section 35 Shaft diameter 60 mm Rapid traverse longitudinal 24 mm/min Rapid traverse flat 20 m/min Tailstock stroke 850 mm Engine power 30/22 kW Total power requirement 55 kVA Information VERY Well preserved machine with chip conveyor with CNC MISIBUSHI M 730 CELOS FUTTE DIAM 300 ...

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-20000 rpmSpindle taperHSK-63A DIN 69893 Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minDirect measuring systemDirect path measuring systemSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel ra ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataRapid traverse longitudinal/transverse/vertical30/30/30 m/minFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® toolsDrive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-AClamping System DIN ISO 7388-3-A, ADToolchanger with set up station for tool loadingNumber of tools 30

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minGeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.16800 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinPackage Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Pallet C-axis d 630 mm / 24.9 in Speed C-axis 1.000 rpm Integrated balancing sensor Motor ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Set of additional documentationSet of additional documentation Option includes: - machine manual - control manual - parts catalogue (in paper version)

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose220h5 mmSpindle bore102 mmSpindle diametre on front bearing160 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)580 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Number of driven tools12 Shank diametre according to DIN 6988040 mmSpeed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the a ...

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter920 mmWeight approx.19900 KgRapid feed X / Z20/24 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z485/2150 mmNumber of tool stations12 Speed max.1600 rpmBar diameter max.116 mmSwing- Ø, max.733 mmMax. Turning Length2000 mmDrive power main spindle45/37 kWCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) Hollow Cylinder set for KITAGAWA 24in. Hollow Chuck B-24A1521D (without chuck body) (SK-OP)(Left Spindle) Hollow Cylinder Set for 24-inch) Chuck B-24A1521D (Bar work capacity dia. 117 mm (4.61 inch)) Hollow cylinder and draw bar are  ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.Set of additional documentationSet of additional documentation Option includes: - machine manual ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.Set of additional documentationSet of additional documentation Option includes: - machine manual ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.Set of additional documentationSet of additional documentation Option includes: - machine manual ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.Set of additional documentationSet of additional documentation Option includes: - machine manual ...

CharacteristicsTable surface850 x 650 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMovement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSet of additional documentationSet of additional documentation Option includes: - machine manual - control manual - parts catalogue (in paper version)

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSet of additional documentationSet of additional documentation Option includes: - machine manual - control manual - parts catalogue (in paper version)

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal350 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmTorque (40% DC) 48 NmSpeed range 20 - 15000 rpmSpindle taper BT 30Clamping System ISO 7388-3 - JD30ToolchangertoolchangerType of magazine WheelNumber of tools 15TableTable surface 740 x 420 mmMaximum load (table centre) 400 KgPreparation NC-Devider EA510 indirectPreparation 4.th axis Lehmann EA 510.L indirect measuring System Attention: Customer specific optimisations and adjustments are not part of delivery!Chip removal package with chip conveyorChip removal package with chip conveyor conte ...

GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabinDMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampiTool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard)Number of tools 150Preparation measuring probe TS640 ...

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - scraper-type chip-conveyor and bed-flushing; Control: 3D-control Heidenhain iTNC 530 HSCI Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal750 mmCross600 mmVertical560 mmTool changerApplicationVertical Type of magazineWheel Type of gripperPick up Number of tools30 Floor space/WeightDimensions (L x W x H)6,65 x 7,6 x 3,18 mWeight approx.12000 KgSplash guard equipment/cabinSplash guard equipment/cabin with illumination and sliding doors on operators side and front sideMotor spindle with HSK-A 63Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWSpeed range - 18.000 rpmSpindle ...

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - scraper-type chip-conveyor and bed-flushing; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal750 mmCross600 mmVertical560 mmTool changerApplicationVertical Type of magazineWheel Type of gripperPick up Number of tools30 Floor space/WeightDimensions (L x W x H)6,65 x 7,6 x 3,18 mWeight approx.12000 KgSplash guard equipment/cabinSplash guard equipment/cabin with illumination and sliding doors on operators side and front sideHSC75 linear 5-Axis SpecificationHSC 75 linear 5-Axis Specification clamping area Ø 750 mm, Ø 29.52 inch Tilti ...

Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minGeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: 3D-control Heidenhain iTNC 530 HSCI Working area 1Longitudinal450 mmCross580 mmVertical460 mmTool changerApplicationVertical Type of magazineChain Type of gripperDouble gripper Number of tools30 Rigid tableRigid table, clamping area 460 x 600 mm / 18,11 x 23,62 inch Loading weight max. 600 kg / 1322 lbsSpindle speed up to 40,000rpm with Shaft CoolingSpindle speed 20 up to 40,000 rpm within shaft cooling for tool taper HSK-E50 DIN 69893 AC-Main drive with 19,5/15 kW (100/40%DC) 14,5 ...

x-travel: 1050 mm y-travel: 520 mm z-travel: 510 mm control: M 730 BM number of spindle speeds: 13000 tool taper: MAS BT 40 transmission ratio: 1 spindle diameter in front bearing: 80 mm table surface area: 1350 x 600 mm table load: 1,2 t distance spindle /table: 150-660 mm numbers of tools in magazin: 30 diameter of tools max.: 80 mm tool length - max.: 300 mm weight of tools max.: 8 kg tool changing time: 1,3 sec change-time chip to chip: 3 sec rapid travel x/y/z: 1-30 m/min feed: 1-30000 m/min Number of axles: 3+1 St. total power requirement: 25,7 kVA weight of the machine ca.: 7 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Machining Center Mori Seiki NVX 5100 II/40, built 2012, with 3+1 axes Machining hours: under power ON/OFF 32.499h working hours 8.595h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Longitudinal560 mmCross600 mmVertical600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMiscellaneousClamping SystemDIN ISO 7388 CabineFull protection cabinCoolant supplyMulti-jet unit at horizontal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump output: 40 l/min / 10.4 gallon/min at 2 bar / 29 psi for horizontal head (theoretical pump performance) coolant tank capacity: approx.NC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine)Table surface 400 x 400 mmTool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets SK 40 or ...

Working area 1Longitudinal500 mmCross450 mmVertical400 mmGeneralUniversal milling machine, with compound Guideway construction New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataType of main driveAC Drive power (40% DC)20,3 kWDrive power (100% DC)14,5 kWSpeed range20 - 14000 rpmSpindle taperSK 40 DIN 69871 Feed rate longitudinal/transverse/vertical-30000/-30000/-30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minMiscellaneousClamping SystemDIN 69872 Floor space/WeightDimensions (L x W x H)4,15 x 3,98 x 2,75 mWeight approx.4500 KgSwivel Rotary Table, simultaneousSwivel Rotary Table for simultaneous machining swivel range -5 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Not available with NC-Divider EA 410!Table surface 630 x 500 mmCentre bore 30H6 mmMaximum load (table cen ...

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7400 Kg

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7400 Kg

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minMain driveDrive power (100% DC) 10 kWDrive power (40% DC) 15 kWTorque (100% DC) 63 NmTorque (40% DC) 95 NmSpeed range 20 - 12000 rpmSpindle taper SK40Clamping System DIN ISO 7388-3-A, ADToolchangertoolchangerNumber of tools 24

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralTwo-spindle turning centre with - 2 cross slides - 2 turrets with 12 positions each (all driven) - main spindle and counter-spindle - 2 C-axis - 2 tool drives - Y-axis on slide 1 - chip conveyor - workpiece-unloading; Control: Fanuc 31i Working areaBar diameter max.50 mmTransport beltTransport belt for finished workpieces outside the machineDMG MORI NETSERVICEDMG MORI NETSERVICE Qualified support by Internet-based remote diagnosticsIoT connectorDMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)Special equipmentAdditional bar capacity for main spindle from Ø 50 mm to Ø 65 mm (max. 5.500 RPM) Additional charge for cooling on turret (upgrade to) 50 bar instead of 25 bar

General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmBar diametre80 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmSlide 1Transverse stroke271 mmLongitudinal stroke830 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,26 x 2,44 x 1,95 (4,3 x 2,44 x 1,95) mWeight approx.6300 KgDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange  ...

General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmClamping chuck diameter max.315 mmMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmSlide 1Longitudinal stroke830 mmTransverse stroke271 mmWork spindle (left)Bar diametre80 mmSpindle bore91 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,26 x 2,44 x 1,95 (4,5 x 2,44 x 1,95) mWeight approx.6300 KgDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange  ...

General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmBar diametre80 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmSlide 1Longitudinal stroke830 mmTransverse stroke271 mmTool holder 1Number of tool stations12 Number of driven tools12 Shank diametre according to DIN 6988040 mmSpeed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightWeight approx.6300 KgDimensions (L x W x H)3,26 x 2,44 x 1,95 (4,5 x 2,44 x 1,95) mDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange  ...

General2 spindles automatic lathe - 2 cross slides - Main and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Part unloading chute; Control: Numeric control Fanuc 32i Working areaBar diameter max.20 mmCounter spindle collet cleaningCounter spindle collet cleaning with coolantChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B260 and bush-spindle syncronismAdditional charge for belt type chip conveyorAdditional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machininOil mist filter for emulsion or oilOil mist filter fo ...

GeneralTwo spindle Swiss turning automatic lathe; Control: Fanuc 310is Working areaBar diameter max.42 mmChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B236 and bush-spindle syncronismDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55 KWDouble tool h. for ext.machining on rev.Double tool holder for external machining on revolver for shaft 16x16Double drill hold. on rev.cyl.junct.d.25Double drill holder on revolver with cyl. junction diam.25mmRad.driven mill.-drill.unit on rev.Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 speed max. 5000 rpmDouble axial driver drill.-mill.-unit on rev.Double axial driven drilling and milling unit on revolver with cyl. junction for collet ESX/ER 20 ratio 1:1 speed max. 5000 r ...

GeneralCNC Swiss type lathe with Fanuc control; Control: FANUC 310 iTB Working areaTurning diameter33 mmDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55/1.1 KWRad.driven mill.-drill.unit on rev.Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 speed max. 5000 rpmDouble tool h. for ext.machining on rev.Double tool holder for external machining on revolver for shaft 16x16Double axial driver drill.-mill.-unit on rev.Double axial driven drilling and milling unit on revolver with cyl. junction for collet ESX/ER 20 ratio 1:1 speed max. 5000 rpmSpecial equipmentHinged belt chip conveyor with Discharge height 1200 mm Self-regulating guide bush Double cone Double turret drill holder with cyl. holder 25 mm Surcharge for cooling system 600 l Pump 8 and 20 bar, paper belt filter Bushing double cone 0_18 ...

GeneralTwo spindle Swiss turning automatic lathe; Control: Fanuc 310is Working areaBar diameter max.42 mmChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B236 and bush-spindle syncronismDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55 KWAxial drilling unit for back work.oper.Axial drilling unit for support for back working operation (slide 2) with 2 rot.spindles, junction for collet ESX/ER 20 and 2 cyl.junction diam.25mmDouble tool h. for ext.machining on rev.Double tool holder for external machining on revolver for shaft 16x16Double drill hold. on rev.cyl.junct.d.25Double drill holder on revolver with cyl. junction diam.25mmRad.driven mill.-drill.unit on rev.Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 sp ...

Key data: 600 mm, 500 mm, 500 mm

1 universal machining center DMG-Mori DMU 60 Evo Linear built in 2013 Travel X/Y/Z 600 mm x 500 mm x 500 mm Control Heidenhain ITNC 530 HSCI NC swivel rotary table 600 mm x 500 mm Swivel range B-axis -5° to + 110° C-axis 360° incl. table cooling Spindle speed 20 -18 000 rpm HSK 63 A Tool magazine with 60 slots Infrared Probe TS 649 Laser Tool Measurement IKZ with 40 bar, chip conveyor Electr. Handwheel.

control: FANUC 18i TB turning diameter: 190 mm swing diameter: 250 mm spindle distance: 750 mm spindle turning speed range: -6000 U/min turret head: 2x 16 tool taper: VDI 30 Overall size: 3350x2400x2000 mm weight of the machine ca.: 5.5 t Y-Axis 2 Spindles 2 turret with each 16 driven positions Robot Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 1.400 mm travel -y axis: 1.200 mm travel -z axis: 1.350 mm control: FANUC - MSX-701III numbers of positions in the tool changer: 60 tool taper: HSK 100 max. Spindle speed: 8.000 U/min. max. tool length: 800 mm max. tool weight: 30 kg Milling machining centers - horizontal | MORI SEIKI - NH8000 DCG equipped with additional 4th axis. Equipment: - B-axis (rotary table): 360,000 X 0.0001, - 2-fold pallet changing system, - Pallet dimensions 800 mm x 800 mm, The machine is in a well-maintained condition with approx. 30.000 (h) Power-On hours. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MORI-SEIKI | NH 8000 | NH8000DCG | NH-8000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 800 mm, 700 mm, 700 mm

Machine Details Stock-No. 1105-03969 Type of machine Machining Center - Horizontal Make MORI SEIKI Type SH 503/40 Year of manufacture 2000 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis EXW (Incoterms 2000) loaded on Price Technical details x-travel 800 mm Y-Travel 700 mm Z-Travel 700 mm control MTSUBISHI turning speeds 10000 1/min Spindle Drive 30/25 kW Number of tool station 60 BT 40 max. tool length 400 mm max. tool weight 12 kg tool changing time 1,3 sec numbers of pallets 2 Pallet dimension 500x500 360000° mm working diameter max.730 mm table load 0.5 t Rapid Travel X/Y/Z 50 m/min total power requirement 50 kVA weight of the machine approx. 14 t Accessories Chip conveyor Additional information WITH 4 AXIS 360000° AND MORI MSG 805 CONTROL BT 40 10000 TPM MAGASIN 60 TOOLS C ...

Key data: 200 mm, 220 mm, 280 mm

Control Siemens 840D sl Operate Travel X/Y/Z 200/220/280 mm Spindle speed 42,000 min-1 Tool magazine for 24 tools HSK E32 NC Swivel/Rotary Table IKZ Probe Paper Tape Filter Vacuum Conveyor