We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,299 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Mobile press system with belt or packing press - can be varied by hourly performance More detailed information on request!; New machine - best condition
used
J. Engelsmann mobile lifter for containers etc., max. weight 300kg, fork length approx 700mm, fork diameter 50mm, fork gap approx. 600mm, max. lift approx. 1700mm from the floor.
new
Description: -Powerful, fully hydraulic cordless saw -Lifan motor with electric starter, feed and conveyor belt -Hydraulic feed and conveyor belt 320 cm long and 15 cm wide -The conveyor belt is lifted and lowered with a winch -The length of the firewood can be set as desired. The maximum length is 30 - 57 cm, diameter 37 cm -The price includes a 3.2 meter conveyor with a winch, belt width 150 mm Technical specifications: Engine: 188F LIFAN petrol engine Weight: 520 kg Max. log diameter: 38 cm Max. log length: 55 cm Engine speed: 3800 rpm Chainsaw: 18 inches (STIHL) Cylinder bore: 3.2 inches Duty cycle time: 7 seconds Tires: 12 inches Splitting wedge: 4-handed (optional 6-handed) -This machine is available right away. -For shipping information contact us directly.
used
Glatt LR 350 mobile elevating and tipping device for drums and containers etc, max weight load 350kg, fork length approx. 750mm, fork diameter approx. 73mm, approx 910mm gap, max. lift height approx. 1450mm from the floor.
new
Description: -Powerful, fully hydraulic wood saw with electric motor -Hydraulic feed and conveyor belt 320 cm long and 15 cm wide -The conveyor belt is lifted and lowered with a winch -The length of the firewood can be set as desired. The maximum length is 30 - 57 cm, diameter 37 cm -The price includes a 3.2 meter conveyor with a winch and a hydraulic feed table 180cm with an electromagnetic switch Technical specifications: Motor: 7.5kW, 50Hz, 380V, 3-phase Weight: 520 kg Max. log diameter: 38 cm Max. log length: 55 cm Engine speed: 4800 rpm Chainsaw: 18 inches (STIHL) Cylinder bore: 4 inches Duty cycle time: 8 seconds Tires: 12 inches Splitting wedge: 4-handed (optional 6-handed) -This machine is available right away. -For shipping information contact us directly.
new
Description: -Powerful, fully hydraulic cordless saw -Lifan motor with electric starter, feed and conveyor belt -Hydraulic feed and conveyor belt 320 cm long and 15 cm wide -The conveyor belt is lifted and lowered with a winch -The length of the firewood can be set as desired. The maximum length is 30 - 57 cm, diameter 37 cm -The price includes a 3.2 meter conveyor with a winch and a hydraulic feed table 180cm with electromagnet. switch Technical specifications: Engine: 188F LIFAN petrol engine Weight: 520 kg Max. log diameter: 38 cm Max. log length: 55 cm Engine speed: 3800 rpm Chainsaw: 18 inches (STIHL) Cylinder bore: 4 inches Duty cycle time: 8 seconds Tires: 12 inches Splitting wedge: 4-handed (optional 6-handed) -This machine is available right away. -For shipping information contact us directly.
new
Mobile package crosscut saw Holtec Caps star o package cross-section up to 1.25 m x 1.25 m o Round wood diameter up to 1.60 m o Electric motor 11 KW o Pointed tooth chain o Double-sided stellitierte rail (Quad reversible) o Bar length: 1.90 m
used
Manufacturer Symbol Model MC9060-G (MC9000-G Series) RAM Memory 64 MB Form Pistol Operating System Windows CE .NET Display resolution 240 x 320 Scanner type Laser Data Collection Type Wireless Used in good condition with 4-fold charging station approx. 15 pieces available Against bid! Figure corresponds to the offered device! Picture shows an unused device, but the offered one is used! Illustration for information only! Special price
used
6-Achsenmessgelenkarmsystem Manufacturer: Zett-mess Type of machine: AMPG - 36 p Year of construction: 2003 2 same facilities are available. The price is for a plant. All information without guarantee
used
Technical specifications: automatic raw water supply: Exchange pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.5: 7.5 kWVorfiltration: Selbstreinigender filter with automatic SteuerungFilterfeinheit: 300 µmMaximaler flow rate: 40 m ³/hFlockungsstufe: flocculation tank: 2 x 0,5 m³ (material PP) charging pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.0: 5.5 kWRührwerke FlockungsbehälterDosierstelle for flocculant: static mix / Rohrflockulator (material PP) ) Ultrafiltration: number of UF modules: 8 Stck.Modulanordnung in the rack (x-series): 2Filterfläche of the UF modules: 60 m ² Backwashing and chemically supported backwash: Backwashing medium frequency-controlled RückspülpumpeNeutralisation: neutralisation tank: Material PENutzvolumen: 5.0 m³ material, shaft and stirrer: beschichtetDosierstationen steel: ...
used
OEC Medical System Compact 7600 with: Tube Nagel & Goller EP-F-190 0.6/1.5 Image amplifier 23 cm LIH (Last Image Hold) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians ...
used
Mobile Solar Power MS-2000 (Ref. No. 504-2626) Battery capacity: 600'000 A/h, or 2'220 W/h Power: 2'000W, max. 5'000W Battery Type: ternary lithium-polymer battery Size: 320x230x335mm Adapter: DC 25.5V/8A, 204W max. Solar Power: 18V 10A 180W Recommended design: 100W 17.6V, 5.68A solar panel Direct charging DC: 12V 4.5A AC output: 220V 50Hz/110V 60Hz AC output 3 ports: 2000W, max 5000W Connections: USBX2:5V, 3.1A max. QC3.0X1:5V/3A,9V/2A,12V/1.5A DC output: 12V, 7A max. PD type-C X1: PD 60W, 5V/3a, 9V/3a, 12V/3a, 15V/3a, 20V/2.2A (bidirectional) Cigarette lighter 13V / 10 MS-SP200/200W 200W solar panel as portable power plant 2000W, MS-SP200/200W Peak Power : 200W Efficiency of the cells: MONO >19% Cable length: 2M/14AWG Output : 19V Material: PET+EVA+Solar cell+EVA+PCB+Nylon Color: Black & Orange AC input power supply Vehicle Charger Cable DC 100W ...
new
new all stainless steel discharging height ± 1.770 – 2.250 mm mobile
new
NEW ! all stainless steel suitable for eurobins of 200L discharging height : ± 700-900 mm 1,5 kW mobile ± 300 kg dimensions (l x w x h) : ± 1.800 x 1.100 x 1.300 mm
new
Suction nozzle diameter: 300mm; maximum flow rate: 6000 m³/h; Nominal flow rate: 5089 m³/h; Volume flow monitoring: pressure differential indicator; Filter area: 31.8 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 70 db; Spahnsack capacity: 480 l; Filter cleaning: mororic; Engine power: 7.5 kW; Extinguishing device: yes; Machine length: 3245 mm ; Machine width: 1030 mm; Machine height: 2595 mm; Weight: 780 kg; The Riedex vacuum extractors have been developed for the extraction of wood chips, wood dust and related substances, but also for various plastics, dry aluminium chips and paper dust. When using chip bins: An even filling of the dust bins cannot be guaranteed for procedural reasons.
new
Suction nozzle diameter: 350mm; maximum flow rate: 8000 m³/h; Nominal flow rate: 6927 m³/h; Vacuum: 2600 Pa at 21.4 m/s in dusted condition; Volume flow monitoring: pressure differential indicator; Filter area: 31.8 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 72 db; Chip bag volume: 640 l; Filter cleaning: mororic; Engine power: 11 kW; Extinguishing device: yes; Machine length: 4165 mm ; Machine width: 1270 mm; Machine height: 2595 mm; Weight: 900 kg; The Riedex vacuum extractors have been developed for the extraction of wood chips, wood dust and related substances, but also for various plastics, dry aluminium chips and paper dust. When using chip bins: An even filling of the dust bins cannot be guaranteed for procedural reasons. Technical data DM-350/M-B or P-B Motor power: 11.0 kW or 15.0 kW (see additional price) Nominal flow rate 20 m/ ...
new
Suction nozzle diameter: 250mm; maximum flow rate: 5000 m³/h; Nominal flow rate: 3534 m³/h; Volume flow monitoring: pressure differential indicator; Filter area: 25.4 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 70 db; Spahnsack capacity: 480 l; Filter cleaning: mororic; Motor power: 5.5 kW; Extinguishing device: yes; Machine length: 3510 mm ; Machine width: 880 mm; Machine height: 2545 mm; Weight: 580 kg; The Riedex vacuum extractors have been developed for the extraction of wood chips, wood dust and related substances, but also for various plastics, dry aluminium chips and paper dust. When using chip bins: An even filling of the dust bins cannot be guaranteed for procedural reasons.
used
Spectro material analyzer mobile Neyy2 Type Spectrotest JR Capable of analyzing light elements in spark mode, the SpectroTest was built for use in the shop or in the field. Arc or spark excitation is available as well as a UV probe for carbon, phosphorus and sulfur analysis. More data on request
used
mobile hydraulic pump -on a mobile cart -Operating voltage: 380 volts -with push button
used
Mobile front axle ramp, butt, 9m long, 10 tons, front side loading - second-hand - : Price ex location: now only 9.950.-€ instead of 14.500.-€ (net)! Manufacturer: Butt Type: BKV109 Year of construction: 2020 Load capacity 10000 Total length: 9,000mm Total width: 2,800mm Ride width: 2,400mm Height fixed at 1,000mm Axle load: 5.000kg Dead weight approx. 4,000 kg. RAL 7016 Hot-dip galvanized special anti-slip gratings The MOBILE FRONT AXLE RAMP has been adapted for a project and has been given a fixed height (it is not height-adjustable). It is therefore not suitable for loading and unloading standard trucks The support points are adapted to the fixed height and the slope at the place of use (see photos). Condition: very little used – like new! Available: now Location: 24558 Henstedt-Ulzburg
used
Assembly crane, Industrial crane, Workshop crane, Mobile crane, Gantry crane, Crane (used) Manufacturer: Eisenwerk Weserhütte A.G Width min: 1500 mm Width max: 2150 mm Lifting height min: 960 mm Lifting height max: 4000 mm Load capacity: 2000 kg Weight: approx. 900 kg Projection: 1680 mm Length: 3000 mm Width: 1500 / 2150 mm Height: 2850 mm Lifting and lowering device manually by hand pump The crane is in good condition and ready for immediate use. Forklifts available, freely loaded trucks Shipping by freight forwarder possible Location of the machine 48324 Sendenhorst If you have any questions 015735496006 The price is net plus 19% VAT.
new
Mobile sawmill Fähe MSV1.1, YOC 2023 - Trunk length: 3 m - Stem diameter: depending on the length of the blade - Saw option: electric saw, chainsaw - Original supports: 2 pieces - Material: Steel - Surface: powder-coated - Machine weight: 30 kg - Space requirements (W x D x H): 1.2 x 3.0 x 1.4 m Details Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed to 2 or more cantilevers with wood screws. Please check the ladder dimensions to make sure everything fits. For the assembly you need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend another log support. Accessories optional: additional master supports
used
Philips mobile C-arm BV 29 with tube FO 14 0.6/1.6, image intensifier 23 cm, double monitor • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • The installation, commissioning and configuration of the system or system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
used
Compressor/Atlas-Copco/mobile Type XAHS 186 DD Year of construction 2008 In the case of the 1881 h Motor 104 KW Weight 1975 kg ABE K 582 Green license plate Location Lower Saxony, currently in the service workshop I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. The offer prices are gross and negotiable! The included VAT will be shown on the invoice. Dismantling, loading and shipping on request! I will be happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp)
used
Builder: TERRA SELECT Model: T5 Motor: PERKINS 55 kW (75 HP) Transp. Data: L. 11.150 mm x L. 2.550 mm x A. 4.050 mm Operat. Data: L. 14.100 mm x L. 6.800 mm x A. 3.900 mm Year: 2005 Working Hours: 3.200 h Hourly Production: 120 m³/h Screening: TROMMEL L. 4.500 mm x D. 2.000 mm Hopper Height: 2.820 mm Hopper Capacity: 4.40 m³ Discharge Belts: L. 4.900 mm x L. 900 mm Fuel Tank: 300 L Weight: 15.400 Kg
used
- Three mobile knives units for additional knife fold - Can be used on combi or buckle folders for various configurations ( Mbo, Stahl, etc. )
used
Mobile dust extractor Brand: SCHUKO Type: Vacomat 300 XP New machine Technical data: Connection Ø: 300mm Filter cleaning: pneumatic Volumen flow: 5950 m³/h Motor power: 7,5 kW Filter surface area: 32,0 m², Test sign H3 / BGHM HO 143032 Dust level M, AWN 16 Noise absorbation: 74 dB(A) Incl. switch box Schuko V22/23 incl. forklift consoles
used
Mobile dust extractor SCHUKO Type: Vacomat 180 XP Technical data: Connection Ø: 180 mm Filter cleaning :pneumatical (manual start) Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Filter surface area: 13,5 m² Test sign H3 / BGHM HO 163002 Dust level M, AWN 16 Cone Sound absorbation: 74 dB(A)
used
Mobile dust extractor SCHUKO Type: Vacomat 180 XPe Technical data: Connection Ø: 180 mm Filter cleaning: motorical Filter surface area: 13,5 m² Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Dust level M, Test sign H3 / BGHM HO163002 AWN 16 Cone Noise absorbation: 74 dB(A)
used
Mobile dust extractor Brand: SCHUKO Type: Vacomat 160 XPe New machine Technical data: Connection Ø: 160 mm Filter cleaning: motorised Volume flow: 1.593 m³/h Nominal volume flow: 1447 m³/h Motor power: 2,2 kW Negative pressure: 2.200 pa Filter surface area: 9,5 m² Test sign H3 / BGHM HO 123027 Dust level M, AWN 16 Noise absorbation: 69 dB(A)
used
Mobile dust extractor Brand: SCHUKO Type: Vacomat 160 XP New machine Technical data: Connection Ø: 160 mm Filter cleaning: pneumatical (manual start) Volume flow: 1.593 m³/h Nominal volume flow: 1447 m³/h Motor power: 2,2 kW Negative pressure: 2.200 pa Filter surface area: 9,5 m² Test sign H3 / BGHM HO 123027 Dust level M, AWN 16 Noise absorbation: 69 dB(A)
used
mobile extraction Brand:SCHUKO Typ: Vacomat 200 XPe Techncal data: Connection Ø: 200 mm Filter cleaning: motorical Nominal volume flow: 2262 m³/h Motor power: 4,0 kW Filter surface area: 14,5 m² Dust level M, AWN 16 Noise absorbation: 73 dB(A) Test sign H3 / BGHM HO 123027
used
Mobile dust extractor SCHUKO Type: Vacomat 200 XP Technical data: Connection Ø: 200 mm Filter cleaning: pneumatical (manual start) Volume flow: 2262 m³/h Motor power: 4,0 kW Filter surface area: 14,5 m² Test sign H3 / BGHM HO 123027 Dust level M, AWN 16 Noise absorbation: 73 dB(A)
used
Hydraulic pressure: 120bar, with Two-Cylinder Diesel Motor, scoop, the tires and rims were renewed.
used
Loading mobile for 200 litres standard car
used
Operational hours counter: 10,500h, with Drive Motor CAT C32 ACERT, frame, container, controls and ventilation.
used
Container size: 90x70cm, total height: 225cm.
used
4-in-1 mobile workstation with 5.5 kVA power generator with 230 Volt outlet, small/large (= function 1), welding machine with 200 Ampere current (= function 2); 1.35 kW air compressor, 10 litre tank capacity, 8 Bar (= function 3); Extendable telescopic light tower, mast height max. 450 cm, light pole (= function 4). equipped with 420 cm3 petrol engine; electric start + pull start; comes with a 12 Volt starter battery; unused
used
Water filter station, water treatment with diesel engine and compressor in container used manufacturer: Type: WFS 3/76 Year of construction: 1977 The operation can be done with third-party network or own network via: Diesel engine FIMAG Finsterwalde Type 6-1521/104-0 10 kVA 14.8 A 390 V 50 Hz follow Total dimensions: approx. 6 x 2.4 x 2.4 m Changes and errors in the technical data, information and prices as well as intermediate sale reserved.
used
Mobile loader,stainless steel,Meattec,For lift/tipping of Vemag bins.
used
Mobile loader,stainless steel,SFK-Danfotech CH 300,for lift/dump of Vemag bins.
new
capacity 90 degrees: round: 172 mm capacity 90 degrees: square: 170 mm : 170 x 170 dimensions of saw-band: 2035 x 20 x 0,9 mm dimensions: 430 x 960 x 520 m band speed: 30 - 80 m/min total power requirement: 1,5 kW weight of the machine ca.: 38 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
capacity 90 degrees: round: 125 mm capacity 90 degrees: square: 125 mm : 127 x 125 mm dimensions of saw-band: 1435 x 12,7 x 0,65 mm band speed: 38 - 80 m/min total power requirement: 0,95 kW weight of the machine ca.: 18 kg dimensions: 720 x 380 x 450 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 130 mm : 130 x 125 dimensions of saw-band: 1440 x 13 x 0,65 mm dimensions: 350 x 690 x 520 m band speed: 30 - 80 m/min total power requirement: 1,2 kW weight of the machine ca.: 19 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.