mmw used for sale

Brand new three-jaw lathe chuckChuck diameter: 250 mmLining hole: 85 mmRecording: Camlock 8:: 136.3 / 139.2 mmWith- 6 locating bolts- reversible, screw-on top jawsSpecial pricePrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC press brake make LOTZE type PZ 150Machine -No: 20327455 built in 1982 only 3200 operating hoursTechnical specifications:max.pressing force: 150 tmax.working length: 4500 mmTable width: 350 mmStand passage: 4000 mmInstallation height: 500 mmThroat: 200 mmTable height: 900 mmOpening width: 490 mmTable under the floor: 580 mmmot.backgauge: 5 - 1000 mmDownward speed idle max .: 100 mm / IUpward speed: 68.2 mm / lPress speed: 7.5 mm / lDrive power: 12.5 kWDimensions: 5400 x 2000 x 3500 mmWeight approx: 16000 kgwith- CNC control Cybelec DNC 70 (faulty) Control was retrofitted or converted in 1993- Universal die 90 x 90 divided, 4000 mm long- divided deer foot tool 4000 mm long, height 165 mm- Foot switch with two-hand release- Floor machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data ...

Two-jaw lathe make Fabr. BISON steel versionYear of construction 2008Chuck diameter: 250 mmBore: 75 mmWith- 1 set of base jaws- 1 set of soft top jaws- cylindrical flange receptacle- square keyunusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic press brake make HM type JONO 20.075Machine -No: 1143, built in 2002Press force: 75 tWorking length: 2000 mmStop length: 180 mmWorking speed / down: 10 mm / sWorking speed / high: 19 mm / sHydraulic motor: 11 kWSupply voltage: 3x400 VAC / 50 Hz + N + PEControl voltage: 24 VAC + 24 VDCMax. Pressure: 180 barOil quantity: 125 lWeight: 5.5 tExternal dimensions: 2340 x 2205 x 1965 mmWith- Control SIEMENS SIMATEC OP 7xa0xa0xa0 for X + Y- shared reef foot tool- Univ. die- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Multi spindle drilling head make SAWAS type SBS Gr. IIFabr. -No: 10957 Year 1995Number of taps: 6is: 4Spacing of the drill spindles: 65 mmPosition of the spindles: m lineGear ratio: 2External dimensions approx: 400 x 300 x 350 mmWith- Adapter flange for Alzmetall SB machinesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC press brake make AMADA type APX 50.20Ser. -No: APX 50.20 A31213, built in 1993Technical specifications:max.pressing force: 50 tWorking length: 2085 mmPassage between the uprights: 1520 mmStroke: 100 mmThroat: 400 mmTable height: 950 mmOpening width: 370 mmWorking speed: 9 mm / sDelivery speed: 73 mm / sOpening speed: 85 mm / sExternal dimensions approx .: 2600 x 2250 x 2100 mmWeight approx: 3000 kgWith- a complete set of tools- Operator control- Two-hand operation- foot switch- Control defectiveusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deep hole drill make SASSEXTechnical specifications:Drilling depth: 400 mmDrilling diameter: 60 mmTool holder: MK 5Overall length: 590 mmWith- Internal coolant supplyusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Punching machine make WEINGARTEN type XKSHw 30Fabr. -No: 600/64, year of construction 1964Press force: 30 tSheet thickness: 1.5 mmStrokes per minute: 80 - 240Tappet adjustment: 45 - 20 mmRam stroke: 10 - 60 mmTable size: 300 x 500 mmOpening in the table: 120 x 220 mmDischarge: 170 mmPassage between the columns in front Machine: 400 mmExternal dimensions L x W x H: 1500 x 1400 x 2200 mmWith- Feed device- straightening station- modern control cabinet rear a.d. machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Casting and finishing plate made of cast iron FISCHER, AschaffenburgYear of construction 1979Dates:Plate size: 1500 x 750 mmPlate thickness solid: 50 mmTotal thickness (ribbed): 200 mmWith- Feet- Direct horizontal parting device SCHMID-KORTAxa0xa0xa0 Type A 7/2 A Fabr.-No. 11/79used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Punching machine make WEINGARTEN type XKSHw 30Fabr. -No: 764/59, built in 1959Press force: 30 tSheet thickness: 1.25 mmStrokes: 80 - 240Tappet adjustment: 45 - 20 mmRam stroke: 10 - 50 mmTable size: 300 x 500 mmOpening in the table: 120 x 220 mmDischarge: 170 mmPassage between the columns in front a.d. Machine: 400 mmExternal dimensions L x W x H: 1500 x 1400 x 2200 mmWith- Feed device- straightening station- modern control cabinet rear a.d. machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Clamping plate with several clamping holesSize 2750 x 1400 mmHeight 400 mmwith several clamping holes Drm. 40 and 50 mmused, from an operational resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make RUHRMANN type ASR 45Ser. -No: 14326 Year 1996Press force: 45 tRam adjustment: 100 mmadjustable stroke: 20 - 200 mmPusher strokes: 40 - 160 per minuteTable size: 900 x 800 mmPlunger surface: 600 x 400 mmlargest distance table - ram: 800 mmInstallation height: 790 mmDiarrhea hole: 400 x 600 mmMax. Tool weight: 500 kgMotor power: 7.5 kWWeight approx: 7800 kgExternal dimensions approx: 1400 x 1600 x 3100 mmWith- Control Siemens Simatic OP 7- transverse shaft- swiveling control panel- Electric control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make WEINGARTEN type ARV 63Order number. 121101, built in 1971Technical specifications:Pressing force: 63 tgr. sheet thickness: 10 mmDischarge: 270 mmTable: 760 x 480 mmDiarrhea hole in the table: 250 x 150 mmNumber of strokes: 56 and 84 / mingr. distance table - ram: 500 mmkl. Distance table - ram: 200 mmRam stroke: 8 - 100 mmRam adjustment: 63 mmExternal dimensions L x W x H: 900 x 2000 x 2600 mmWeight approx: 4 tonsWith- UVV for inlays- EMERGENCY STOP SWITCHused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Directional plate made of cast ironDimensions: 1250 x 1000 x 210/55 mmWith- 4 adjustable feetused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press MABU type 12 TFprobably built in 1984Technical specifications:Pressing force: 12 tStroke adjustment: 6 - 60 mmTable size: 380 x 270 mmDiarrhea: 100 mmBear size: 120 x 100 mmInstallation height: 210 mmThroat: 145 mmDrive power: 1.1 kWExternal dimensions approx: 800 x 900 x 1750 mmWith- pneum. Friction clutch Control BA 1.1 for with / without movable protection Movable security not available!- height adjustable table- foot switch- stroke counterused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T-slot worktable made of cast iron (formerly press table)Length: 1520 mmWidth: 850 mmHeight: 980 mmWith- 6 T-slotsxa0xa0 Transverse Lg. 850 mmxa0xa0 Groove size 38/22 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make HEILBRONN type EPT 6Fabr. -No: 4869, built in 1986Technical specifications:Pressure force: 6.3 tThroat: 130 mmTable size: 320 x 240 mmThrough hole in the table: 80 mmTable height: 800 mmMax. Installation height: 155 mmRam surface: 128 x 180 mmSlide adjustment: 30 mmStroke adjustment: 6 - 60 mmStroke rate: 180 H / minDrive power: 0.5 kWDimensions approx: 1000 x 1000 x 1800 mm mmWeight about: 500 kgWith- flywheel drive- Two-handed disengagement- Manual inlays 11062/11064- foot switch- Two-hand and single stroke- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T-slot clamping plate made of cast ironDimensions:Length: 1600 mmWidth: 1200 mmHeight: 200 mmWeight approx: 1400kgWith- 7 transverse T-slots 26/48xa0xa0 Distance 100/200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make HELMERDING type EL 35 BCom.-No: 77218 Masch.-No: 5182 year of construction 1977Technical specifications:Pressure capacity: 35 tStroke adjustment: 12 - 80 mmRam adjustment: 70 mmRam area: 340 x 180 mmgreatest distance table - ram: 360 mmStrokes per minute: 110Table adjustment: 150 mmProjection: 230 mmTable surface: 600 x 460 mmDrop-through hole in the table: 220 x 130 mmWeight approx.: 2050 kgwith- Additional brake Ortlinghausen and UVV- Height-adjustable tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Directional plate made of cast ironLength: 3000 mmWidth: 2000 mmHeight: 120/45 mmused, in goodConditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic drawing press make CAME Panasonic Matsushita type THB 120 x 100Model no 1882 year of construction 1996Max. Press force: 125 tRetraction force: 20 tCompressive force of the die cushion: 70 tRetraction force of the die cushion: 37 tOil pressure of the press: 210 barOil pressure of the die cushion: 140 barTable size: 1300 x 1000 mmPassage: 1600 x 1200 mmInstallation height: 1300 mmRam stroke: 900 mmOil filling: 1300 lRapid traverse from max.: 300 mm / sCylinder diameter: 224 mm + 2 x 112/80Cylinder Tissue Diameter: 310/180/310/250 mmWeight of the upper tool max.:2300 kgDrive power: 45 kWDrive Power Cushion: 22 kWDimensions L x W x H approx .: 4,000 x 3350 x 5400 mmWeight approx. 31 tWith- heated intermediate plate- Holding device- Photocell manufacturer SICK- Two-hand operation- UVV regulations according to 89/392 EEC- CE clampprevious use:Deep drawing of slit masks for the pictur ...

Hydr. Double Column Press Fabr. KINDSMÜLLER Type KP 50 EMachine -No: 355, built in 1972Printing capacity max.:50 tStroke of the pistons: 400 mmRam speed before: 40 mm / secRam speed back: 85 mm / secPiston diameter: 120 mmTable size: 635 x 455 mmPassage between the uprights: 750 mmInstallation height: 740 mmTank capacity: 150 lDrive power: 4 kWExternal dimensions: 1200 x 1100 x 2400 mmWith- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T-slot mounting plateTechnical specifications:Length: 4000 mmWidth: 2500 mmHeight: 300 mmWeight approx: 8.0 tWith- 14 x T-slot in the longitudinal directionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Double-column drawing press make ECKOLD type UPP 60-10Mash. -No: 646/230 withHydraulic unit HAD 500/2, machine -No: 276/477Max. Press force: 60 tPassage between the uprights: 1400 mmTable width: 400 mmInstallation height: 650 mmWith- Tools for the production of drain potsxa0xa0xa0 for soil drainage, there are 3 sizes available- 2 drawing tools for top part of inlet boxesxa0xa0 Drm. 200 mm for 1.5 and 2.0 mm material thicknessused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneum. Single Column C-Form Press Fabr. TOX Pressotechnik Type S50.4.80.6 / PC 50Year of construction 1989Pressing force: 440 kN / 44 tTotal stroke: 80 mmof which power stroke: 6.0 mmCompressed air connection: 6.0 barTable size: 596 x 496 mmInstallation height: 500 mmDiarrhea hole: 120 mmWith- Press frame PC 50- Power package S50.4.80.6- 2-column guided ram plate- Underframe U 50- protective cover SH 50- Press control ST 03 3/4 - Setup mode = additional deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Rectangular T-groove clamping plate made of cast iron (hollow body)Technical specifications:Outside dimensions approx: 700 x 1050 x 350 mmNumber of T-slots horizontal: 6Size of the T-slots: 20/34 mmWall thickness: 60 mmVertical elevation each: 3 clamping slotsDistance of T-slots: 150 mmWith- 2 suspension lugsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cast T-slot platenTechnical specifications:Dimensions approx. L x W x H: 2010 x 1080 x 220 mmThickness: 35 mmRibbing: 185 mmNumber of T-slots: 3Dimensions of the T-slots: 60/36 mmGroove distance: 275 mmNumber of mounting holes: 8Size of the mounting holes: 155 mmWeight approx: 1140 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic single-column press make SCHÖN type UTE-BCFabr. -No: 1619 built in 1977Max. Press force: 50 tStroke length: 150 mmTable size: 550 x 750 mmDiarrhea opening: 80 mmBear size: 500 x 300 mmOutreach: 280 mmInstallation height: 350 mmPassage width to the rear: 150 mmDrive power: 7.5 hpDimensions L x W x H: 1300 x 1400 x 2400 mmWeight approx. 2000 kgWith- adjustable stoppage time- Blower- Jogging mode- Photocellused, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T-slot mounting bracket made of cast ironTechnical specifications:Clamping area: 700 x 550 mmFootprint: 500 x 550 mmMaterial thickness: 60 mmWith- 6 horiz. T-slotslittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Four-column press make FIBRO FISCHER-BRODBECK type UVOS 20-SMachine -No: 12-302-06, built in 1967Press force: 20 tRetraction force: 10 tOperating pressure: 250 barPiston diameter: 100 mmStroke: 420 mmTable and bear size: 730 x 510 mmClear dimensions between the columns: 290/500 mmInstallation height: 600 mmColumn diameter: 70 mmWeight approx: 1350 kgExternal dimensions approx: 1200 x 1150 x 2400 mmWith- Pressure display- Pressure control- Holding time setting- Zweihansausrückung- Emergency stop switchused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T-slot clamping plate, ribbedTechnical specifications:Length: 3000 mmWidth: 1000 mmHeight: 190 mm:T-slots lengthways: 4 piecesWeight approx: 2 tWith- ribbed- Ring eyelets for transportused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic single column press make WMW ZEULENRODA type PYE 160 S 1Machine -No: 057-007 / 38 built in 1974Max. Press force: 160 tRetraction force: 34 tRam stroke: 500 mmProjection: 360 mmInstallation height: 800 mmSpeed from: 0.2 m / min.Speed at: 0.125 m / min.av. Working speed: 92 mm / sSpeed at: 125 mm / sTable size: 900 x 630 mmBear area: 750 x 450 mmTable height: 800 mmOperating pressure: 160 kp / cm³Connected load: 17 kWDimensions L x W x H: 1250 x 2200 x 3650 mmWeight approx: 7 tWith- stroke limitation- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Measuring plate with T-slot for screwing on a measuring columnon baseTechnical specifications:Length: 770 mmWidth: 760 mmPlate height: 40 mmPlate height with ribs: 200 mmon baseWith- 1 T-slot:usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. High-speed single-column press Fabr. DUNKES type HZS 40Machine -No: H 77-581, built in 1981Press force: 40 tOperating pressure: 270 barStroke: 150 mmInstallation height: 400 mmOutreach: 280 mmRapid traverse: 400 mm / sec.Rapid traverse to: 400 mm / sec.Pressing under full load: 14 mm / sec.Table height: 820 mmTable surface: 600 x 515 mmDiarrhea hole in the table: 100 mm Drm.Drive power: 7.5 kWWeight: 3.1 tOil filling: 230 lExternal dimensions: 850 x 1200 x 2390 mmWith- Cutting impact damping- Safety 2-hand control- self-holding with rapid traverse shutdown- Electric return stroke limitation- Setup tip circuit- Fully automatic workflow- Emergency stop switch- stepless force preselection- graduated Adj. mech. depth stop- Switching in the lower stroke rangexa0xa0xa0 Lift and time changeoverxa0xa0xa0 Lift and pressure changeover- separate hydraulics for drawing cushionsused, in good co ...

T-slot clamping plate, ribbedTechnical specifications:Dimensions L x W x H approx.: 3000 x 1435 x 200 mmWeight approx.: 2500 kg:with- 4 adjustable feet- 4 T-slots- mounting holesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Four-column screw press make AGEO type SP 40/650Technical specifications:Pressure force: 40 tAchievable maximum pressure: 50 tSpindle diameter: 95 mmNumber of guide columns: 4Clear width between the columns: 650 mmInstallation height: 440 mmRam stroke: 345 mmTable surface: 650 x 550 mmPlunger surface: 580 x 250 mmPusher bore: 50 mmTable height: 690 mmDimensions L x W x H: 1800 x 1200 x 1800 mmWeight approx. 2210 kgWith- hydr. Rear lifting deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic toggle quick spindle striking press make HILU HILLER & LUTZType KNP 100 C machine -No: 1712 built in 1988Press force: 100 tWork distance from UT: 8 mmStrokes per minute: 70Ram stroke max.:0 - 120 mmRam adjustment: 80 mmInstallation height: 480 mmDischarge: 450 mmTable surface: 800 x 810 mmPlunger surface: 700 x 400 mmDiarrhea opening in the table: 200 mmAnvil plate: 200 x 50 mmDrive power: 18.5 kWDimensions L x W x H approx: 1200 x 1800 x 3000 mmWith- UV for manual inlay work- Footswitchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC stop make de man type AST-1/0 / MSR 3Year 1995Support length: 3000 mmPad width: 200 mmWorking height: 800 - 1000 mmFeed rate: 22 m / minDrive power: 120 WWith- PC control MSR 3 with max. 1000 sentencesvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Shaft straightening machine / shaft straightening press make SAUER & Sohn Dieburg type DR 15/4000 NAStraightening force at 6 bar air pressure: 15 tfor workpiece length up to: 4000 mmWorkpiece diameter: 80 mmWorkpiece cross-section flat max.: 5000 mm2Center shafts max.: 2000 mm2unzentr. Shafts max.: 2000 mm2Stroke of the straightening punch: 30 mmWeight: 800 kgOutside dimensions approx.: 4300 x 700 x 1500 mmWith- a lot of accessoriesused, good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Curved rotary indexing table make EXPERT type E 19/0030/4Masch. -No: 4806 with 4 stations, advantage: The 4 stations will beapproached precisely and softly. The schedule can not be changedbecome. You can run the table all around, but it stopsalways briefly at the 4 stations,Turntable diameter: 1350 mmTable height: 820 mmInner bore: 90 mmMax. Load: 1 tOuter diameter: 1500 mmWith- ball bearing slewing ring- Index drive- without motorvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Semi-automatic screen printing machine manufactured by Borghoff & WILK type Mini Printer Mod II, year 1988Max. Print format: 400 x 600 mmMax. Die cast thickness: 20 mmPrinting plate dimension: 550 x 700 mmVacuum area: 430 x 630 mmMax. Frame dimensions: 640 x 820 mmminute Internal frame dimension: 400 x 200 mmmax.clock: 12000 p / hDrive power: 0.75 hpVacuum motor: 0.75 hpPower connection: 380 V 50 HzExternal dimensions: 1040 x 1260 x 1330 mmWeight: 300 kgWith- Drying cart- Cast vacuum base plate with fine adjustment- aut. Sincroprint device for printing speed- adjustable squeegee angle- single and continuous cycleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regar ...

Hydraulic straightening press make EITEL type RPT 100 TYear of construction 1978Technical specifications:Press force: 100 tWorkpiece height: 200 mmWorkpiece width: 210 mmWorkpiece length: 12000 mmRam speed: 1.5 m / min.With- hand control- Roller conveyor feed with support table 7000 mm- Roller table discharge table 7000 mm- Pneumatic material discharge device- Standing desk- Spare Partsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pre-assembly device make VOSS type P 70Best. -No: 991070 Machine -No: 170 Year Nov. 1989for pre-assembly of cutting rings on pipes from AD 6 - 42 mmand for mechanical pre-assembly of the flared cone and collar ringsPipe size to be machined: 6 - 42 mmMax. Pressure capacity up to: 250 barDrive power: 0.3 kWPower connection: 220 V, 50 HzDimensions L x W x H: 500 x 550 x 210 mmWeight approx: 65 kgWith- Underframe- various accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hand-held mot. Sweeper make HAKO type HAMSTER 800 VMachine -No: 6210018123 Year 1990Sweeping width: 800 mmWeight approx.: 180 kgOutside dimensions approx. 1200 x 1700 x 1200 mmWith- Travel drive- 4 stroke Kawasaki engine- side brushused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic straightening press make MAE type S 16 RHTechnical specifications:Press force: 16 tRetraction force: 57.7 kNWorking pressure: 204 barRam speed, down: 25 mm/sRam speed, up: 68 mm/sStroke: 200mmInstallation height: 550 mmProjection: 190 mmTable depth: 320 mmTable width: 480 mmTable height: 750 mmTank volume: 120 lPump flow rate: 11.6 l (min.Tappet bore: 32mmDrive power: 5.5 kWExternal dimensions L x W x H: 1400 x 700 x 2070 mmweight approx.used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Personal time attendance make Z + M type Argus J 30 PlusFabr. -No: 8383Clock: digital (time, date, day of the week)Accuracy: 15 sec./monthPushbutton: Inkjet blackBackup: 3 months in case of power failureWeight approx: 4.5 kgOutside dimensions approx: 160 x 205 x 128 mmWith- Scannerused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic four-roll plate bending machine Fabr. Haeusler type VRM HY 2000-6Machine number: 1186-1968, built in 1968Max. Working width approx. 2040 mmMax. Druchgang approx: 2100 mmMax. Sheet thickness with bend: 6 mmUpper and lower roller diameter each approx: 250 mmSide roller diameter approx.: 200 mmStroke of rollers approx. Each: 220 mm2 working speedsTotal drive power approx: 18 KWWorking height approx: 1300 mmSpace required: L 5450 x D 1900 x H1930 mmWeight approx: 10500 kgWith:- Both side rollers with mot. delivery for bending + conical bending- hydr. Folding bearing for removing the sheet metal- Slip clutch- Right-left purchase- separate control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are ...

Hydraulic test case make DUNLOP BTR hydraulicExternal dimensions approx: 325 x 280 x 80 mmWith- 4 pressure displays 25, 100, 250 and 400 bar- 4 connections- Hose connectionsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual 3-roll round bending machines make COIL-TEC type KSM 2030 / 1.0Year of construction 1998Technical specifications:Working length: 2030 mmmax.sheet thickness: 1.5 mmPre-sealing capacity: 1 mmRoller diameter: 90 mmExternal dimensions L x W x H: 2750 x 520 x 1135 mmWeight: 645 kgWith- Asymmetrical roller arrangement- Rollers turned convex- Upper roller can be swiveled out- Top roller with rebate groove- Lower roller adjustable via eccentric lever- Wire inlay grooves- Rear roller adjustable with ratchetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Furnace pipe pulling machine make SCHNEIDERYear of construction 1994Working range: 60 - 220 mmWorking stroke: 120 mmElectricity requirement: 0.75 kWDisplacement of the tube counterholder: 750 mmPower connection: 380 V / 50 HzOutside dimensions approx: 2000 x 750 x 1570 mmWith- 14 pulling tools: 60; 70; 80; 90; 95; 100; 120xa0xa0 130; 140; 150; 170; 180; 200; 220 mm- Manual operation- Automatic mode- Two-hand releaseused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools