mixer stainless used for sale

Cat.-Nr. 09-1025 new Standard Features: • Strong Frame Construction • Possible to use as Basis and Intermediate Storage • Movable with Low Lifting Elevating Truck Measurements and Weight: Total Height: 390 mm Width: 760 mm Length: 1250 mm Weight: 27 kg The price is for one barrel. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 13-0048 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 3,2 bar capacity: 7.800 litres/h Motor: 7,5 kW Connection: inlet/outlet: DN 65 according to DIN 32676 - can be changed on request for an additional charge Measurements: length: 140 cm width: 44 cm height: 95 cm weight: 300 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

Stirring tank 150 l. in stainless steel design, for feeding and/or mixing liquids and solids before grinding, spraying etc., incl. 3,6 kW gear drive , lid with inspection glass, agitator with propeller (200 mm ?, tool coated with oxide ceramics). In very good condition.

2 PC. stainless steel chimneys outside diameter 300 mm, inner diameter 200 mm, length 7 m 1 STK. stainless steel fireplace outside diameter 400 mm, diameter 300 mm, length 7 m Price VB

cylindrical standing single-walled stainless steel container Content 50 litres Material 1.4301 Operating temperature 40 C Propeller agitator kW 0.37, 1.405 rpm the interior of the container is coated with plastic Spout at the bottom center

Glazing and cleaning booth in stainless steel, with KSB water pump 2,2 kW, suction fan 3.0 kW (incl. Exhaust tube 600 mm Ø), lighting, turntable and switchgear cabinet. Dismantled, ready for transport.

Stainless steel chimney Dimensions: Height: 23.5 m Diameter: approx. 1 m Material: 1.4301 (V2A) Chimney consists of two parts each 12 meters, which are screwed! Frames run to top thin-walled. Construction: Frames length: 2 meters Material thickness of frame: Skirt: 8 mm (steel) Following two frames: 6 mm (1.4301) Following two frames: 4 mm (1.4301) Remaining frames: 3 mm (1.4301) In very good condition!

Cat No. 14-00221 Eurolux Storage and Transport Tank Cubic - 750 Litres in AISI 304 stackable – NEW Multi-functional Tanks - pressureless Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height body tank: 800 mm Total Height: 1380 mm Outer Dimensions: 800 x 1200 mm Weight: 110 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karl ...

12 x 14.800 ltr. VA4 completely Pasteurization tank, Holvrieka, round, used standing on feet, it will be only the lower tanks sold, ø 2.48 m, H: 3,80 m (2 St. 7.60 m), incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 20 x 10.200 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 2,10 m, H zs.: 7,40 m, incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 36 x 5.000 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 1.50 m, H zs.: 7 m, incl. all armatures and pressure valves (excluding pr ...

Used stainless steel pressure leave filter made by Padovan. 27 leaves.

3 tube feet standing stainless steel container made of V2A, 1.4301 WSt Containers with upper edge reinforcement Manufacturer: API Schmidt-Bretten Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: approx. 1,560 mm Open top containers. Container with lower convex base on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 In very good condition!

Used reactor made of stainless steel with capacity 4500 liters. Coat - carbon steel. The reactor equipped with a stirrer and a coil made of stainless steel and the power of 11 kW motor with gear. No documentation. 2 pieces available. Weight approx. 4 tons

Used standing on 3 feet of pipe stainless steel container made of V2A, 1.4301 - WSt - container with upper edge reinforcement Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: 1.500 mm Open top containers. Container with bottom cone base. on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 otherwise com. photo in very good condition!

VA Tube Bundle WT Manufacturer: E. Gessner AG, built 1982, material 1.4465, 1.4571, Dimensions: Diameter Coat: 600mm Effective Length Pipes: 5000mm Di-inner tube: 20mm Da inner tube: 24mm Total length 5880mm Total height: 1000mm Connections Coat: DN 200 Connections Pipe side DN 50 Foot distance (holes) 3000mm Transmission area: 65m2 / 78m2 (indoor/outdoor) 208 inner tubes Ab. Pressures: -1 / 3 bar inner tubes -1 / 6bar coat Temp range: -10 / +200 Price refers to a heat exchanger. 2 present

Stainless steel containment system Glovebox with insulators with scale and discharge screw for industry, pharmaceuticals, manufacturing and laboratory used , as good as new condition Manufacturer: Hecht Anlagenbau Type: 7.178710 Y.O.M.: 2008 / Nr.: 201040 Material: Stainless steel Test room area approx. 900 x 900 mm Front flap approx. 850 x 650 mm Servive flap on the side approx. 700 x 580 mm for the safe emptying of packaging, sack containers in the Pack Off system for pharmaceutical and chemical products to avoid contermination the containment system can be opened from 3 pages and has an eceleration in a connection on the side of approx. 350 mm Outlet at the bottom approx. 500 mm Opening rear approx. 100 mm Discharge screw with pneumatic valve Screw length approx. 1500 mm Screws approx. 110 mm Screw drive Siemens Z48-KQ - 1.7 L oil; 3000/113 rpm 4x Load cells "Fli ...

P7 - used 2 x 10 m³ / 2 x 10,000 L stainless steel tanks, vertically standing, insulated, heating element inside, on 3 bases, in good condition. Dimensions: diam. outside appr. 2.00 m x height 4.85 m diam. inside appr. 1.80 m x height 4.40 m former glycerin 86% tank The tanks are insulated, have a heating spiral on the inside and stand on 3 bases. The tanks have been cleaned professionally. The containers / stainless steel tanks can be used as storage tanks for many different media. The containers are used, according to the age signs of wear are present. The tanks are located near Baden-Baden, Germany. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already ...

USED STAINLESS STEEL 400 LITRES V MIXER REF.: C6558 V-mixer made of stainless steel with a capacity of 400 liters equipped with an intensifier bar (prepared for inerting or liquid injection) to improve mixing. Feeding through the two upper holes with manual lid and discharge with a 200 mm diameter butterfly valve. The intensifier bar motor is 5.5 hp (1430 rpm) With electrical panel. General characteristics: Material Stainless steel Weight 640 kg Overall dimensions: Total length: 3150 mm Overall height: 1600mm (3000mm with legs) Overall width: 850 mm Electrical panel: 1800x800x310 mm Technical characteristics: Capacity 400 L Engine 3 cv - 1500 rpm Reducer 22 rpm (i= 41.8) Agitation Barra intensificadora

1 pc. stainless steel tank with large inspection flap and 3 sampling points, staplerfaehig and stackable additional staplerfaehiger catcher in stainless steel (not pictured) Fasungsvermoegen 1,000 litres Operating pressure 0.1 bar For hazardous substances of class 3 6.1 b and Weight Tank 212 kg Collecting pan approx. 240kg Special price

various large foods available: Always full wine-hater 220 l diameter: 550 mm Immer-weinhaelter 530 l diameter: 820 mm Immer-weinhaelter 1100 l Diameter: 1000 mm Immer-Weinhaelter 2200 l diameter: 1400 mm; NEW - best condition

Stainless steel cooking line Kitchen Cup block kuechenline; Stainless steel cooking line Kitchen line Kitchen block Kitchen line 4-flame stainless steel Gas stove with oven stainless steel countertop Spuele with single-lever mixing battery 5 x shelf 1 x drawer 1 x 230V socket Stainless steel socket mass approx. (HxBxT)68x265x65cm Component of this auction is one of the two picture shipping costs, please ask us. Other items can be found in our shop.

Te Koop: Stainless steel butterfly valve Handbediend. 6 "las las karambir zonder."

Technical data capacitor volume flow max.: 300m3/h capor-mass max in delivery state: approx. 430mm x1610 mm high Cylindricher part: approx. 273 mm weight of the chamber in delivery state: approx. 80 kg content upper part (capacitor): approx. 30L content lower part (template) approx. 28 L material Elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 to 80C capacitor vacuum max: 0 to 1000 mbar (absolute) (capacitor not suitable for overpressure) Temperature exchanger max: 1 to 80C operating equipment Exchanger: water pressure exchanger max: 10bar material exchanger: CU-tinned material capacitor: stainless steel Technical questions or other construction equipment please on request.; ready for use

Hilge GmbH (Groupe Grundfos) HYGIANA II/4 BLOC 25 m3/h

Standing cylinder-conical tanks (distrib), fermentation tanks with 2 bar pressure tanks are built and ready for pickup in 35390 GieÃ?en Dimensions: Ã? 3.80 (including ISO) Ã? 12.5 m high insulation: 15 cm

Manufacturer: Hinke Model: ATS Sudmo Capacity: 6400 l Pressure tank up to 5 bar

Producer: Bolz Producer: Sinks Allgau Capacity: 500 l The tank is equipped with 2 probes to measure the filling level.

Producer: H & K Model: CIP system Capacity: 1500 l Year of construction: 1983 The tank is equipped with a liquid manometer.

Preparation of crystal sugar We can offer you a complete system for dissolving and pasteurizing crystalline sugarThe device includes:-Pasteurizer KZE , producer: Schmidt, year: 1997 3-reservoir, double coat (heating-cooling) capacity of one tank: 800 l.dimensions: the height of the tank: 1100 mm, diameter: 1400 mm, total height: 2200 mm

2 with each ca 1000 l  

Year of constr.: 2019 Dimensions: L 4400 mm x W 3500 mm x H 5000 m Ploughshare mixers: Type: PPP 2000 / 3 Manufacturer: MINOX Volume: 2000 Lt. Material: Stainless steel 3 x cutter heads Main drive: 37 KW;

Stainless steel tank (4 pieces) -single-walled -with cover -outlet valve -on pallets

Used stainless steel reactor, AISI 316 steel with a capacity of 12.000 L. New 1980. Technical data: Total capacity: V 12 m3. Pressure 6 Bar. Ex 22 kW motor. Dimensions fi 2200 mm, height 3110 mm.

V10 - used approx. 32 m³ / 32,000 litres stainless V4A steel tank, transportation tank, insulated, with 3 internal walls, on a steel frame. technical details: capacity: approx. 32 m³ / 32,000 litres material: stainless V4A steel tank, Inox, AISI 316L: WNr. 1.4404 (X2CrNiMo17-12-2), (V4A, A4L) Austenitic, stainless steel, L stands for low carbon content. use: for mechanical components with increased corrosion resistance requirements, especially in chloride-containing media and for hydrogen. AISI 316L is used in a wide range of fields, in the pharmaceutical industry (manufacture of cleaning, disinfection and drying machines), in medical and dental technology, as well as in swimming pool construction. weight: approx. 4 t without frame test pressure: 4 bar dimensions: approx. 2.00 m x 9.00 m; total height incl. frame approx. 2.70 m Other: Used tank in good condition,  ...

Stainless steel bag filter with quick release, TSBF-0102-AD06-050D, Hayward, used Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. Technical data: - Filter size 2, - Filter bag size 2 required (not included in delivery) - Inlet from the side left flange DN50 - Outlet to bottom flange DN50 - Incl. stainless steel basket and pressure ring - Operating pressure max 6 bar - Perm. temperature 160°C - Design - cover with quick release fastener - With mounting brackets for wall mounting - Filter volume 32 L - Design in stainless steel 1.4571 - Incl. round cord seal - The filter is in top condit ...

Stainless steel bag filter with quick release, TSBF-0102-AD06-050D, Hayward, used Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. Technical data: - Filter size 2, - Filter bag size 2 required (not included in delivery) - Inlet from the side left flange DN50 - Outlet to bottom flange was changed to DN80 - Incl. stainless steel basket and pressure ring - Operating pressure max 6 bar - Perm. temperature 160°C - Design - cover with quick release fastener - With mounting brackets for wall mounting - Filter volume 32 L - Design in stainless steel 1.4571 - Incl. round cord seal - The filter i ...

20,000 liters tank with thermal insulation not used tanks

Pipesdiameter outside 42 mm/ DN 32 = € 3,95/ meter 48 mm/ DN 40 = € 4,25/ meter 60 mm/ DN 50 = € 5,25/ meter 76 mm/ DN 65 = € 6,95/ meter 89 mm/ DN 80 = € 7,25/ meter 114 mm/ DN 100 = € 9,75/ meter 139 mm/ DN 125 = € 11,95/ meter

Transport tank made Hermann Waldner type 4500, in a good used and functional condition. Completely made of stainless steel, 1000 litres of filling volume. Dangerous goods type approval BAM 0301 / 31A. Large lid hatch, bottom drain valve. Mounted on base. Dimensions W/D/H 100/20/175 cm. Further on request.

Liquidation of industrial meat grinder, built entirely in stainless steel. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Characteristics: - Construction: entirely in stainless steel. - Mouth diameter: 98 mm - Cutting system: Unger 98 (single) -Engines: III: 400V, 50Hz, 10A, 5Hp, Kw3.7. - Production: +- 800-900 kg/h - Transmission: oil-bathed gears - Tray dimensions: 525 mm x 730 mm x 130 mm high. - Overall dimensions: 590 mm x 840 mm x 1140 mm high. Meat mincer, meat grinder, industrial mincer, butcher mincer, meat machinery. Its condition is excellent re-release. Equipment reviewed and guaranteed.

Liquidation of German industrial meat grinder, built entirely in stainless steel. Manufactured by Melior. Its condition is second-hand, very robust and of high quality. Equipment overhauled in its entirety (re-release) guaranteed. Characteristics: - Construction: entirely in stainless steel. - Mouth diameter: 114 mm - Cutting system: Unger 114 (single) -Engines: III: 400V, 50Hz, 10A, 5Hp, Kw3.7. - Production: +- 1100-1400 kg/h - Transmission: oil-bathed gears - Tray dimensions: 610 mm x 860 mm x 130 mm high. - Overall dimensions: 650 mm x 900 mm x 1300 mm high. Meat mincer, meat grinder, industrial mincer, butcher mincer, meat machinery. Its condition is excellent re-release. Equipment reviewed and guaranteed.

1 cool- and heatable, sterilizable, vacuum-resistant stainless steel process tank for the production of dairy, delicatessen, pharmaceutical and cosmetic products Manufacturer: Seitz-Werke, GmbH Type: DB 170. FW Machine. No.: 2226 Content: 187 litres Material: stainless steel V4A / 1.4571 Product-contacted parts polished Product room: pressure-resistant to 3 bar Double jacket for heating and cooling Double jacket: 35.5 litres, pressure-resistant to 2 bar Operating temperature: up to 133 C Ventilation and vent valve Rise tube Pointer thermometer from 0 - 160 C Pressure gauge Safety valve Filling opening NW 60 Bottom seat valve NW 20 Agitator flange available Operating instructions + list of spare parts, etc. Dimensions: approx. 0.8 x 1.4 m Weight: approx. 200 kg Technical condition: used, excellent as good as new operating condition

2 centrifugal pumps / centrifugal pumps, self-priming Type: KSP 50 /150-2.3 Manufacturer: Kyhäuserhütte Artern, Germany Power: 10,000 l/h Speed: 1,420 rpm. Head: 14 m Connections: Inlet NW 50 / Drain NW 50 Design: Stainless steel Media: beer, AfG, milk, lye, etc. Connection values: 380 V, 50 Hz; 2.2 KW Weight: approx. 43 kg Dimensions: 50 x 30 x 35 cm Technical condition: refurbished

Double-walled stainless steel tank with agitator 1500 Liter YOM 1991

Double-walled stainless steel tank with agitator 1500 Liter YOM 1991

2x Pressure tank single - walled with frame. 800 liter per tank 1600 total.

Stainless steel elbow, welding elbow -Size: 40 x 1.5 mm 90° -Price: complete -Number: 39 pieces -Weight: 7 kg

Stainless steel, work table -stable execution -Dimensions: 898/598/H870 mm -Weight: 12 kg

12,000 litres of mash agitator tanks with lateral agitator from V2A available: 5 pieces Dimensions: Ges. Height: approx. 3800 mm Zyl. Height: approx. 2150 mm Diameter: approx. 2350 mm Material: V2A - AISI 304, 1.4404 Surface: Inner IIID, outside 2B=IIIC Topsoil: - With cone bottom - With threaded fittings see photos Cylinder bottom: - with agitator mixer 1.1 kW on the side - with manhole 330 x 430 mm - with threaded nozzle DN 25 - with diving sleeve - with threaded nozzle DN 50 rear Underbody: - with pointed cone bottom - with 3 feet with calottes, height adjustable - with forward-drawn outlet DN 65

-Stainless steel work table -Execution: stable -Ground floor: 1 -Border -Tray -Dimensions: 2000/930/H800 mm -Weight: 82 kg

-Stainless steel work table -Execution: stable -Ground floor: 1 -Border -Tray -Dimensions: 2000/930/H930 mm -Weight: 82 kg