We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,295 used machines on RESALE, but how to find them? Machine Search
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0 Tank contents: 0 CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 750 mm Table width: 600 mm Dimension of the workpice: Length: 1200 mm Width: 850 mm Height: 400 mm Table load max.: 1600 kg Longitudinal traverse (X-axis): 600 mm Cross traverse (Y-axis): 400 mm Height adjustment (Z-axis): 450 mm max. electrode weight: 100 kg Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 4500 kg Overall dimensions machine: Length: 3150 mm Width: 2750 mm Height: 2960 mm
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Max. dimensions of work piece: Length: 900 mm Width: 520 mm Height: 270 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 320 mm Cross traverse (Y-axis): 220 mm Vertical travel (Z axis): 270 mm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.25 mm up to: 0.30 mm Overall dimensions machine: Length: 3400 mm Width: 2400 mm Height: 2300 mm
used
X – Axis Travel (600 mm) Y – Axis Travel (400 mm) Z – Axis Travel (270 mm) U, V Axis Travel (80 x 80 mm) Wire Diameter Range (min ~ max) (0.10 ~ 0.30 mm) Work Tank Dimensions (W x D) (1040 x 780 mm) Maximum Workpiece Weight (850 kg)
used
AGIE AGIETRON 100 C Tool Change 16 positions Control on axes + axis C
used
AGIE AGIETRON 200 C Dimension table 800 x 630 mm working tank (internal size) 1070 x 740 x H. 420 mm Max size piece 1000 x 700 x H. 320 mm Axis X 500 mm | Y 350 mm | Z 500 mm Rapid speeds 720 mm
used
Spark Erosion Machine AGIE AGIETRON 250C used machine in excellent condition tool change 24 positions
used
Dieburg Pronto 5035 CNC Die-sinking EDM machine
used
Key data: 350 _Unknown / Other, 250 Sodick, 220
Longitudinal X: 350 mm Cross Y: 250 mm Vertical Z: 220 mm Ampere: 0 A CNC Brand: _Unknown / Other CNC Model: Sodick Make: Sodick Type: A325 Mark25 Control: Sodick MARK 25 YOP: 1998 U Axis 80 mm V Axis 80 mm X-Axis: 350mm Y-Axis: 250mm Z-Axis: 220mm Table size L x W / or ø:600 x 400 mm Table load: 450Kg Length: 2.250 mm Width: 2.450 mm Height: 2.400 mm Weight: 3.000 kg
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A MACH-id 4003 MAKE Charmilles TYPE ROBOFORM 200 YEAR 1990 DIMENSIONS Length 3000 mm Width 1600 mm Height 2500 mm
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0 Tank contents: 0 MACH-id 4000 MERK CHarmilles TYPE Roboform 31 YEAR 1996
used
Travel distances: 350 x 250 x 315 mm [ X x Y x Z ] Table size X: 576 mm Table size Y: 400 mm workpiece weight: 500 kg C-axis Pinole recording: EROWA
used
Travel: 825 x 680 x 405 mm [ X x Y x Z ] Table size X: 1200 mm Table size Y: 850 mm workpiece weight: 3000 kg Electrode changer: 50 - fold Generator POCON 60 Pinole recording: EROWA Heavy Duty Adapter O-Module Halogen lamp
used
Axis X ... 350mm Axis Y ... 250mm Axis Z ... 250mm Machine weight ... 4000kg L x W x H ... 1490x1050x2070mm workpiece weight ... 1000kg workpiece length ... 800mm workpiece height ... 320mm workpiece width ... 500mm Desktop... 600x400mm The machine is in good condition, possible to test under power.
used
Capacity: 120 Amp. – 19 kVA X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Table dimensions: 1,100 x 700 mm Distance head - table: 950 mm (max) Oil retainer: 1,700 x 1,000 x 650 mm Workpiece weight: 4,000 kg (Max) Control: CNC Datic S120
used
Travel distances: 320 x 250 x 220 mm [ X x Y x Z ] workpiece size X: 780 mm workpiece size Y: 570 mm workpiece size Z: 200 mm workpiece weight: 350 kg with automatic wire threading U/V axis: 80 mm x 80 mm Cutting in a water bath Conicity: +/- 15° at 120mm
used
AGIE CHARMILLES wire cut AC2 VERTEX year `2010
used
Inv. Num. : 6445 Type: BF 74 Producer: CDM ROVELLA Generated: 2008 Parameters: Workpiece length: 800 mm Workpiece width: 550 mm travel length of the X-axis: 700 mm Travel length of the Y-axis: 400 mm Travel length of the Z-axis: 350 mm Maximum table load: 2000 kg Maximum electrode weight: 90 kg Tank dimensions: 1200 x 750 x 505 mm Weight: 4400 kg
used
Inv. Num. : 6319 Type: AGIETRON HYPERSPARK Producer: AGIE Created: 2006 Parameters: Control system: AGIEVISION Operating hours: 69006 h Switch-on hours: 31080 h Table dimensions: 600 x 450 mm Travel length of the X-axis: 350 mm Travel length of the Y-axis: 250 mm Travel length of the Z-axis: 350 mm Maximum table load: 400 kg Container size: 860 x 620 mm Equipment: Clamping solenoid 3x electrode holder Cooler Dielectric 8x dielectric filter Erowa clamping head
new
Travel: 350 x 250 x 220 mm [ X x Y x Z ] max. workpiece size Z: 220 mm max. workpiece weight: 450 kg Table size X: 600 mm Table size Y: 400 mm with automatic wire threading U- / V-axis: 80 x 80 mm Cutting in a water bath Conicity angle 20° at height 80mm
used
Type: Die-sinking EDM machine Number: 21958 Category: Die-sinking EDM machines / EDM Manafacture: Makino Model: EDAF 3 Year of construction: 2016 Travel: 450 x 350 x 350 mm [ X x Y x Z ] Table size X: 700 mm Table size Y: 500 mm max. workpiece size X: 850 mm max. workpiece size Y: 650 mm max. workpiece size Z: 400 mm max. workpiece weight: 800 kg C-axis Linear scales (X,Y,Z) Control Hyper i Super Spark iV Super Surface Super Edge (incl. MF 4) Super Surface Graphite EROWA Robot Interface (A-Type)
used
This Excetek V650G Erosion machine was made in 2016 in Taiwan. The machine has a wire diameter of 0.15~0.3 mm.
used
This Sodick VL600Q Erosion machine was manufactured in the year 2016 and has 9958 hours. It is equipped with a Sodick LN2W control unit. The machine has a Wire diameter of 0.1-0.3 mm.
used
This EXERON 316 XXL Erosion machine was manufactured in the year 2013.
used
This OPS Ingersoll Gantry 5000 Erosion machine was manufactured in the year 2002 in Germany and has 72500 erosion hours. The machine has an Erowa IMC Robot for changing electrodes and workpieces.
used
This GF FORM 20 Erosion machine was manufactured in the year 2018 in Switzerland. It is equipped with a GF AC FORM HMI control unit.
used
This AGIE AGIEMATIC + AGIEPULS 60 HSF erosion machine was made in the year 2000. It is equipped with an Agie control unit. The machine has a table of 600 x 450 mm.
used
This SODICK VL 400Q Erosion machine was manufactured in 2017 in Hungary. It has a movement range of X400mm, Y300mm, Z220mm. Its tank Size is 860mm x 690mm and its control type is LN2W SODICK. Contact us anytime for further information.
used
This MAKINO EU64 Erosion machines machine was manufactured in 1999 in Japan. It is operated through a MAKINO MGW-N control unit. This 5 axis machine can work with a workpiece weight 1500 kg.
used
This SODICK ALC400P Erosion machine was manufactured in the year 2020 in Thailand and has 3450 operating hours. It is equipped with a Sodick Motion Controller. The machine has a ceramic work surface. Contact us anytime for further questions.
used
This SODICK ALC600G Erosion machine was manufactured in the year 2019 in Thailand and has less than 1000 production hours. It is equipped with a SODICK CELADA control unit.
used
This CHARMILLES ROBOFORM 55P Erosion machine was manufactured in the year 2003 in the United States. It has 3 axis and work table size of 495 x 749 mm.
used
This ONA QX8 B1 L erosion machine was made in the year 2016 in Spain. The machine has a weight allowed on the table of 20000 kg.
used
This Charmilles Roboform 31 Erosion machine was manufactured in the year 1996 in Switzerland.
used
General: Year of construction: 1998 Travel: X 350 mm, Y 250 mm, Z: 300 mm Table size 500 x 400 mm Workpiece dimensions Max. 500 kg Weight approx. 2,350 kg Other equipment and included accessories: Tool changer Tool holder system 3R
used
This Sodick VL600Q Erosion machine was manufactured in the year 2017 in Thailand. It is equipped with a SODICK control unit.
used
This AGIE AGIETRON INTEGRAL 3 EDM Wire Cutting Machine was built in the year 1998. The machine has a table of 800 x 600 mm.
used
This AgieCharmilles CUT 20 P Erosion machine was made in 2015 in China.
used
This CHARMILLES ROBOFORM 51 Erosion machine was made in 1998. The machine has a table size of 750x500 mm.
used
This CHARMILLES ROBOFORM 50 Erosion machine was manufactured in the year 1999. The machine has a table size of 500x400 mm. 2 units are available.
used
This FANUC Robocut α-1iA erosion machine was made in the year 2000 in Japan. It is equipped with a Fanuc Series 18i-W control unit. The machine has a max work table load of 1000 kg.
used
This JS EDM Wi-200s Erosion machine was manufactured in the year 2018 in Taiwan. It is equipped with a JS EDM control unit and has 5 axis.
used
This GF Form E600 Erosion machine was manufactured in the year 2018 in China. It is equipped with a GF AC FORM HMI control unit.
used
This SODICK AG40L erosion machine was manufactured in the year 2020 and has 355 production hours. It is equipped with a SODICK LN2 control unit. The machine disposes of a SVC circuit for superfine surfaces and graphite electrode machining. Contact us anytime for further questions.
used
This Zimmer+Kreim Genius 700 erosion machine was made in the year 2004 and includes a Chameleon tool changer type B. The measuring machine Vista Carl-Zeiss was made in the year 2003. All machines are connected.
used
This AGIE CHARMILLES CUT 20 Erosion machine was manufactured in the year 2008. It is equipped with a Charmilles CNC control unit.
used
This Exeron EDM 310 MF 20 Erosion machine was manufactured in the year 2008 in Germany. It is equipped with an Exeron control unit. The machine was fully retrofitted in 2023 with 6 month warranty.
used
This Agie Agietron Integral 2 Erosion machine was manufactured in Switzerland in 1994. It operates for a max. workpiece weight of 400 kg and max. electrode weight of 100 kg.
used
This SODICK A 500 Erosion machine was manufactured in 2000 in Portugal. It has an X-axis travel of 600 mm, Y-axis travel of 350 mm, and Z-axis travel of 270 mm. It can support a maximum weight of 700 kg on the table. Contact us anytime for further information.
used
This HITACHI SEIKI 254Y Erosion machine was manufactured in the year 2003 in Japan. The machine has a wire feed rate of 20 to 300 mm/s.
used
This VOLLMER QW72 P Erosion machine was manufactured in the year 1997 and has 91446 operating hours. It is equipped with a VOLLMER PMC-System control unit. The machine has a spindle speed of 4000 rpm.