mitsubishi engine used for sale

Central processing unit, control, switchgear, CPU, SPS, SPS control -Manufacturer: Mitsubishi, SPS control from tray sealing machine Inauen VC999/ TS 1200 N -Type: FX2n-48MR-DS -Total dimensions: 295/90/H83 mm -Weight: 1.3 kg

Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Mitsubishi, frequency converter FR-A044-2.2K-ER -Power: 2.2 kW -Input: 380-460 V 50/60 Hz -Output: 6.0 A -Dimensions: 215/200/H185 mm -Weight: 4.8 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor, permanent magnet motor -Mitsubishi: DC Servo Motor HD 81-12S -Tachometer generator: Tamagawa TT-A-II -with: brake -Construction: B5 -Dimensions: 415/205/H200 mm -Weight: 20 kg

Three-phase motor, electric motor -Mitsubishi: Super Line type SF-J -Power: 2.2 kW -Speed: 1430/1720 rpm -Shaft: Ø 28 x 55 mm -Construction: B3 -Dimensions: 360/270/H205 mm -Weight: 30 kg

Refrigeration Compressor, Refrigeration Machine, Refrigeration Compressor, Refrigeration Unit, Refrigeration Compressor, Compressor, Motor Compressor, Separation Hood Compressor, Separation Hood Compressor, Refrigeration Unit, Hermetic Compressor -Manufacturer: Mitsubishi, compressor Hermetic Compressor type NH465YJE -Power kW -Voltage: 380-415/400-460V/50/60Hz -Technical data: see photo of nameplate -Dimensions: 310/200/H410 mm -Weight: 27 kg

Year of Built 2012 Installation year 2012 Workpiece size 3050 x 1525 mm / maximum weight 950 kg Generator 4.5 kw Automatic pallet change LOAD MASTER loader Cutting thickness: - mild steel: 26 mm (oxygen) - Stainless steel: 12 mm (nitrogen) - 10mm aluminum nitrogen (air) Axle travel: X-3100mm / Y-1565mm / Z-150mm Fast travel speed: X and Y - 100m / min Fast travel speed: Z - 65m / min Max feed 50m / min 7.5 inch (2x) 7.5 inch auto focus head Automatic edge / plate detection (automatic rotation) Mitsubishi 4500 Watt cross flow resonator (peak power of 5000W pulse) CO2 laser CO2 / CO / N2 / He = 8/4/60/28 Laser gas consumption 3 liters / hour Double cutting function allows surface removal and cutting on inferior materials and protected sheet metal Edge punching function Control of slag reduction in corners Retraction of the head by normal, cross and arc method 90% ene ...

Technical parameters of the MITSUBISHI ML3015EX S2-45CF-R laser – laser power: 4.5 kW – laser type: CO2 – man-hours: approx. 17,000 h – control: simultaneous 3 axes (X, Y, Z), sensing the height of the Z axis is also possible – maximum dimensions of the element to be processed: 3050 x 1525 mm – weight of the loaded pallet: 950 kg – workpiece support section height: 880 mm – pallet change time: approx. 25 seconds – number of pallets: 2 – X axis feed: 3100 mm – Y axis feed: 1550 mm – Z axis feed: 150 mm – rapid feed (X, Y axis), speed: maximum 100 m / min. (48 in manual mode) – maximum feed speed: 50 m / min. – positioning accuracy: 0.05 / 500 mm (X / Y axis), 0.1 / 100 mm (Z axis) – repeatability: + -0.01 mm (X, Y axis) – machine weight: 10700 kg MITSUBISHI Laser Resonator – reso ...

Installed in August 2014 Regularly maintained Usually very small pieces are cut https://www.mitsubishi-edm.de/en/mvs-series-specifications.html

650 Ton L/D: 19 Screw diameter : 90 mm Screw volume(cm3) : 3140 Stroke : 1350 mm Distance between columns : 950 mm x 950 mm DayLight : 1800 mm Plate size : 1400 mm x 1400 mm All maintenance has been done regularly Only original raw material used on the machine Fully hydraulic

MITSUBISHI solar panel prodcution machines year `2011 x 65 units

MITSUBISHI GUIDELESS CNC GEAR SHAPER Model ST40A s/n will advise Condition; NEW Condition Delivered and installed July 2020 low hours Less than 1900 hours Machine was delivered and installed 3rd QTR of 2020 and has been hardly used. Customer is looking to sell due to limited work and project loss.machine is available for immediate inspection. Machine is equipped with all required features, Tailstock & Pinion support, chip conveyor and all options. Machine wont last contact us today Machine specifications to follow shortly: -Maximum diameter capacity 18" / 450 mm Option -Maximum DP/ module 3.175 DP/8 mod -Maximum work width 4.52" / 115 mm -Maximum cutter stroke 5.31" / 135 mm -Maximum helix angle + 45 deg -Cutter stroke 30-600 SPM -number of cuts 1-4 -Center distance from cutter Max/ Min 16.73" / -4.92" -Maximum radial travel 21.65" -Height of work table to spindl ...

max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table size: 590 x 520 mm Max. workpiece size: 800 x 600 x 220 mm Max. workpiece weight: 500 kg X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm U/V Axis Travel: 1.25" x 1.25" Filter tank capacity: 440 l. Control Mitsubishi Approx. delivery weight: 2000 kg Approx. shipping dimensions in mm: 1550 L x 1800 W x 1930 H

Mitsubishi FX10 EDM, year 1997, the following technical characteristics: X-Y-Z axis strokes mm 350-250-220, U-V axis strokes mm 32-32, maximum workpiece weight kg 500, maximum piece size mm 800-575-215, automatic threading, immersion machine, CNC: Mitsubishi X axis travel: 350 mm Y axis travel: 250 mm Z axis travel: 220 mm Max length of the piece: 800 mm Max workpiece width: 575 mm Max height of the piece: 215 mm Max workpiece weight: 500 kg Automatic threading: Yes

Condition: as good as new (test run ex works)/ traces of storage available The injectors underwent a test run from the factory. When we arrived, they were dismantled and stored. Model: TD15-55B Part Number: 49127-01091 Suitable for: S12R S6R S6R2 Suitable for: Mitsubishi S6R Mitsubishi S6R2 Mitsubishi S12R Mitsubishi S16R

Key data: 350 mm, 250 mm, 220 mm

Mitsubishi FA 10 Year of construction: 2005 Control : Mitsubishi 64 bit - CNC - PC control 5-controlled axes Auto. Wire threading : 0.20 - 0.36 mm Travel ( X/Y/Z) : 350 x 250 x 220 mm Travel (U/V) : +/- 32 mm Max. workpiece weight :500 kg Max. workpiece dimensions : 800 x 600 x 215 mm Interface Ethernet TCP-IPRS 232 C Auto. Wire Alignment Wire spools up to 10 kg

Wire diameter: 1 mm Speed: 1 rpm Number of rolls: 1   CNC Brand: Mitsubishi EDM machineMITSUBISHI - FA10S MACH-ID 7755 Make: MITSUBISHI Type: FA10S Control: Mitsubishi Year: 2012  Max. wire taper Angle15 Gr Wire diameter 0,1 - 0,3 mm Maching U x V 32 x 32  X-Axis:                 350mm Y-Axis:                 250mm Z-Axis:                 220mm Table size L x W / or ø:590 x 514mm Length:                 2072mm Width:                  2460mm Height:                 2030mm Weight:                 2000kg

Description: Serial Number:55DR1663 Max. Workpiece dimensions: 800x600x215 mm Max. Workpiece weight: 500 kg Table dimensions: 640 x 540 mm Travels: X-axis: 400 mm Y-axis: 300 mm Z-axis: 220 mm Table rapid traverse rate: 1300 mm/min Wire diameter: 0,1 to 0,3 mm Max. Wire feed speed: 23 m/min Wire tension: 0,5 to 25 n Taper: OPTOLinear T/C device Taper angle: 15º (with 200mm plate thickness) Working Hours 24073 Dielectric Fluid Reservoir: Working tank volume: 550 litres Filtration flow rate: 50 l/min Water purifier: 10 litres Other features: Superfinishing Rugosity less than Ra 0.2 weight approx.: 2,980 kg, Approx. Onsite Dimension. (l x w x h): 1,910 x 2,702 x 2,015 mm

Size: 720 x 1020 mm Impression: 300 Mio. Equipments: IPC II Intelligent Press Control high speed separator Refrigeration & Recirculation System Grafix Digitronic powder device SAPC semi automatic plate changer Non-Stop Feeder wash device for impression cylinders Plate Cylinder Cocking blanket wash up device: autom. Mitsubishi Delta Dampenin

MIW Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven-Germany Tel:(0049)(0)-4281-950583 Fax:(0049)(0)-4281-950585 abc.miw-zeven.de e-mail:info@miw-zeven

; Mileage [km]: 4; Power [PS]: 5

; Mileage [km]: 6; Power [PS]: 5; Engine: MAN NEW ENGINES

; Mileage [km]: 6; Power [PS]: 5

; Mileage [km]: 6; Power [PS]: 5; Engine: DAF LONG-BLOCK

; Mileage [km]: 6; Power [PS]: 5; Engine: DAF NEW PARTS

; Mileage [km]: 6; Power [PS]: 5; Engine: DAF MARINE

SOLD! ABC ENGINE 8XDXC 886KW @ 750 RPM diesel engine ABS BJ 2002

Crankcase (engine block) Deutz TBG 620V12K

3 x Mak 9M25 engines Available from stock 2850 Kw at 720 Rpm in good condition From our stock in Turkey

Motor Lombardini LDW903,Deutz-Type=F3M1008 general-overhauled engine in off-exchange Email=info@miw-zeven.de

Deutz engine in replacement type=BF4M1008 Turbo refurbished Lombardini Type= LDW120T Turbo Price only on request email=info@miw-zeven.de

SISU/Valmet engine type=612DSE,135KW,6-cylinder series with turbocharger. Motor is complete with starter+alternator,factory repaired. 1 year warranty info@miw-zeven.de

Valmet-Sisu engine type= 612/634 DS/DSE-135KW fully repaired engine with starter, alternator in exchange. info@miw-zeven.de

Altas Motoren im Austausch sofort ab Lager verfügbar. Motoren-Typen:BF4M1013E,BF4L1011T,BF4M1008(LDW1204T),F4M1008(=LDW1204) ,F3M1008(LDW903) BF4M2011,BF4M2012C/BF4-6M2013/C Hatz-Motoren:alle Typen ab Lager lieferbar:ES75/79/780/785/786/1D80/1D81 ansonsten schnelle und günstige Motor-Überholung mit 1 Jahr Garantie info@miw-zeven.de

AT-Motor Scania Typ=DC/DI12 Pumpe-Düse-Motor generalüberholter Motor mit 1 Jahr Garantie 337KW. info@miw-zeven.de

in execution with PowerShift Transmission. Tip height 330 mm Top width 1500 mm maximum swing over bed 690 mm Spindle bore 82 mm

Engine is completely overhauled with turbocharger in exchange. Price only on request

OM 444 LA engine as a crane or construction machines motor can be used. The price is an exchange price.

Scania motors type= DC/DI12 pump nozzle with max.406KW at 1,500/1,800 RPM or in the all-speed range available from stock at short notice with warranty. Also CHP use with vegetable oil,palm oil,fryer oil,etc... Promotions! Mail=info@miw-zeven.de

All original spare parts+engines Lombardini from stock ready to ship the following motors available from stock immediately: LDW602/ 1003 / 1204/1204T/ 1404 MIW Ltd. Engine Repair Plant North-West Ring 8 D-2704 zeven-Germany Phone: 0049 (0) 4281-950583 Fax: 0049 (0) 4281-950585 Mail=info@miw-zeven.de

We offer from stock zzügl. Packaging+Freight to: Timing belt 113 teeth a 42,-/piece Cylinder head LDW1204/1204T/1404 net 840,-/piece all prices to the tax mail= info@miw-zeven.de

AT-Motoren alle sofort ab Lager lieferbar mit Garantie MIW GmbH Motoren-Instandsetzungs-WerkNord-West-Ring 8 27404 Zeven-Germany Tel.0049(0)-4281-950583 Fax.0049(0)-4281-950585 email=info@miw-zeven.de

AT-Motoren alle sofort ab Lager lieferbar mit Garantie info@miw-zeven.de

Motor im Tausch in KHD-AT-Lieferumfang BF4M1013E mit Garantie ab Lager sofort lieferbar für 12 Volt,24Volt sowie Liebherr Ausführung vom Preis abweichend. info@miw-zeven.de

Engine in exchange Yanmar Type=3TNE88-ENKR from Kramer wheel loader with warranty immediately available from stock. all prices plus vat. info@miw-zeven.de

New engine for exchange info@miw-zeven.de

Dimensions: 1.5 m x 4.2 m x 1.5 m (approx. WxLxH) H without WT (WT=1.5 x 1.5 x 1.5 m) Heating unit: 267 kW Brenner : Gas burner, make ELCO Exhaust fireplace : stainless steel, single-walled, diameter 250 Supply air unit: 22,800 m3/h; 7.5 kW; n = 960 rpm Exhaust unit: 22,500 m3/h; 7.5 kW; n = 960 rpm Piping : Supply and exhaust air pipes, deflector hood Electrics : Control cabinet, frequency inverter control with speed control This unit set has already been sold! However, we will soon get a similar aggregate set back in. Please contact us. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Power 365 KW 2 pieces available , price each piece: 1,000,00 € 1 engine built: 1983 and 2nd engine built: 1973 19 100 Displacement cm3