We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,281 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Used cutting machine Hundegger K2 Manufacturer: Hundegger, DE Type: K2 Built: 2000 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 740 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed. Thanks to the 4-axis control, witch ...
used
Max blade diameter: 450 mm Weight: approx. 700 kg Hydropneumatic saw blade feed via 2 manual operation Pneumatic material tensioners Minimum quantity spraying device Table rotatable on both sides with rest points at 45°
used
Used cutting machine Hundegger K2 machining width 1250mm Manufacturer: Hundegger, DE Type: K2i - 5 1250mm Built: 2009 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed. ...
new
- High pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, - Cold water / hot water / steam 32 bar to 140°C / high pressure steam 150 or 200 bar to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and weight: 110x64x98cm, approx. 150kg - incl. 10 m high-pressure hose, spray gun, lance and flat jet dues 25°
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: Allen Bradley PanelView Plus 1000 Technical data Min. internal grinding diameter: 3 mm Max. internal grinding diameter: 50 mm Centre height: 240 mm Grinding spindle head: speeds: from: 350 rpm up to: 1200 rpm Overall dimensions machine: Length: 1700 mm Width: 1500 mm Height: 2300 mm Dimensions of the control: Length: 450 mm Width: 1000 mm Height: 2400 mm Various accessories: Touch screen Wheel trueing attachment Vibrating / oscillating conveyor Status light Loading attachment Parts catcher Switch cabinet Air conditioner
used
Used Hosokawa Cone M ischer 0.4-LFC-41 Volume at water filling 40l Usable volume approx. 34l All parts in contact with the product are made of stainless steel. The container has a jacket with a working temperature of max. 160°C and a pressure of max. 6 bar Max product temperature 110°C working pressure atmosphere The mixer is in good condition, but has not been revised or overhauled.
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 0.8 mm Max. internal grinding diameter: 30 mm Grinding depth: 1 - 100 mm Centre height: 185 mm Distance between centres: 200 mm Workpiece spindle speeds: number (steps): 3 from: 550 rpm up to: 800 rpm Spindle hole: 20 mm Taper in spindle:: 25 W Grinding spindle speeds: from: 30000 rpm up to: 45000 rpm Grinding table travel: min.: 1 mm max: 100 mm Table speeds: stepless up to: 5 m/min Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 610 kg Overall dimensions machine: Length: 1450 mm Width: 760 mm Height: 1600 mm Various accessories: Wheel trueing attachment Coolant system
used
Used cutting machine Hundegger K2 -5 machining width 625mm Manufacturer: Hundegger, DE Type: K2 - 5, 625mm Built: 2006 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed ...
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 3.0 mm Max. internal grinding diameter: 50 mm Grinding depth: 80 mm Centre height: 200 mm Workpiece spindle speeds: number (steps): 5 from: 350 rpm up to: 1200 rpm Max. angle: 120 ° Spindle hole: 25 mm Possible grinding-spindle speeds: from: 9000 rpm up to: 120000 rpm Grinding table travel: min.: 2 mm max: 300 mm Table speeds: stepless from: 0.10 m/min up to: 10.00 m/min Voltage 50 Hz 3x: 380 Volt Drive for internal grinding spindle: 15.0 kW Machine´s weight about: 2200 kg Overall dimensions machine: Length: 1800 mm Width: 1500 mm Height: 1600 mm Various accessories: Face grinding attachment Internal grinding spindle:: AIR number: 1 max. speed: 80000 rpm
used
DECKEL MAHO DMU 100 T YEAR OF CONSTRUCTION: 2001 - Number of axes: 5 ( simultaneous) milling spindle - Tool holder: SK40 - Spindle drive power: 15 [kW] - Spindle speed: 20 - 12,000 [up] LINEAR ACHSEN - Travel X/Y/Z axes: 1,060 x 710 x 710 [mm] - Rapid speed (X/Y/Z) : 30,000 [mm/min] - Feed speed (X/Y/Z) : 20 - 15,000 [mm/min] SCHWENKACHSE A : SCHWENKKOPF - Travel: 90 [degrees](+/-) - Minimum resolution: 0.001 [degree] SCHWENKACHSE B : NC ROUND TABLE x 800 [mm] - Travel: 360 [degrees](+/-) - Minimum resolution: 0.001 [degree] WERKZEUGWECHSLER - Number of tools in the magazine: 32 ( 2x 16 places) table - Table size: 1500 x 795 [mm] - Loading table max. : 500 [kg]
used
Capazitat 300 Tone Table size 1,500 x 1,500 mm Stosselv creation 500 - 1,000 mm Piston x 400 mm Delete. Table - Stossel Minimum: 500 mm Maximum: 1,500 mm Machine height 4,000 mm Bottom of the floor 1,000 mm Top of the floor 3,000 mm Machine Weight 18.600 kg
used
Injection moulding machine 3-colours (horizontal /vertical/ and 3rd in L-position with protective enclosure) with turntable available now from our warehouse Hannover Make: Arburg Type: 420C 1000-150/150/60 Built in 2003 Control: Selogica Hours: 20092 h +Closing Unit+ Clamping force: 1000 kN / 1000 to. Tie bar ratio: 420 x 420 mm Plate size: 570 x 570 mm Injection Unit 1 (150 unit) Screw size: 15 mm (high-screw) Pvlzwy Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 2 (150 unit Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 3 (60 unit) Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2080 bar extras 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection moulding machine Tool clampi ...
new
Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...
used
oven 550 industrial 2x2x6m temperature range 100 - 550C Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel ...
used
hardening furnace 1200 1x1x2m (possible various sizes) t max 1200C Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Industrie Trockenanlagen Kammeröfen Kunststoff - Beschichtungsöfen Carbonitrieren Afspændingsglødnng Hiærdning og anløbning Carbonisering (indsætning) Anløbning, glødning, hærdning, afhærdning, opløsningsglødning, smedning, udhærdning, forvarmning, tørring, ældning Ovne og anlæg til anløbning, glødning, hærdning, afhærdning, opløsningsglødning, smedning, udhærdning, forvarmning, tørring, ældning Varmebehandling Preshærdning Karbonitre ...
used
Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 150 mm Distance between centres: 680 mm Grinding wheel right and left hand Max. Longitudinal travel: 620 mm Grinding wheel: Grinding weehl left side: Diameter: 350 mm Width: 50 mm Bore: 127 mm Grinding wheel right side: Diameter: 250 mm Width: 25 mm Bore: 127 mm Grinding wheel speeds: number (steps): 3 from: 1640 rpm up to: 2300 rpm Hydraulic cross travel: 0/1.2 mm Angular displacement: -45/+90 ° Work piece spindle head: speeds: stepless from: 65 rpm up to: 500 rpm rotatable: 360 ° Spindle taper:: 4 MT Taper in tailstock:: 3 MT Table angular displacement: +/-8 ° Table speed: stepless from: 0 m/min up to: 5 m/min Mini. auto. longitudinal travel: 0.001 mm Voltage 50 Hz 3x: 400 Volt External Grinding wheel motor: 3 kW Machine´s weight about: 2600 kg Overall ...
used
Description automatic carton setter Keck SK 5 Ft with new Baumer hhs adhesive application system. consisting of Xtend C-421 4 channel control, 4 pieces DLK 404 valves, 15 liters cold glue pressure vessel Year of construction 2004 Operating hours approx. 3800 cardboard formats in the appendix – currently set up for the tomato box. Cleaned, repaired and adjusted. Ce declaration, machine manual, electronic drawing In the video there are no safety doors – but the machine has new safety doors included Power Minimum 2300 / hour Maximum 10000 / hour Optimim 3-5000 / hour FORMAT RANGE tomatoes-paper-tray
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. grinding diameter: 2 mm Max. grinding diameter: 100 mm Width of the grinding wheel: 200 mm Grinding wheel: diameter new wheel: 600 mm diameter used wheel: 400 mm Width: 200 mm Bore: 304.8 mm Speeds: from: 22.5 m/s up to: 45 m/s Regulating spindle: diameter new wheel: 300 mm diameter used wheel: 180/210 mm Width: 200 mm Bore: 127/152 mm Speeds: stepless from: 10 rpm up to: 100 rpm Voltage 50 Hz 3x: 380 Volt Main motor: 18.5 kW Machine´s weight about: 4200 kg Overall dimensions machine: Length: 2500 mm Width: 2100 mm Height: 2200 mm Various accessories: Coolant system
new
Weibert RLA 125 Clean air extraction system Rated volume flow: 1095 m3/h Minimum volume flow: 884 m3/h Max Vacuum: 2220 Pa Chip collection volume max.: 255 ltr. Engine power: 2.2kW Connection 50Hz: 400V Weight: 194 kg Dimensions in mm: 1100 x 830 x 1650 Suction nozzle diameter: 125 mm Height lower edge suction nozzle to the ground: 850 mm Max sound pressure level 73 db (A) G&STÜ-5131250
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. grinding diameter: 0.5 mm Max. grinding diameter: 30 mm Max. workpiece length for infeed grinding: 0.5 - 40 mm Grinding wheel: diameter new wheel: 400 mm Width: 125 mm Bore: 203.2 mm Speeds: number (steps): 2 from: 850 rpm up to: 1700 rpm Peripheral speed: 16 / 32 m/s Regulating spindle: diameter new wheel: 225 mm Width: 125 mm Bore: 80 mm Speeds: stepless from: 0 rpm up to: 120 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2500 mm Width: 2000 mm Height: 1800 mm Various accessories: Touch screen Coolant system Set of flanges Wheel trueing attachment Full splash cabin
used
Drilling machine Reichenbacher Drilling machine with 3 drilling units from above Transmission width maximum 1400 mm 3 motors adjustable to the full width Motor strength 1.5 kW each Motors can be switched individually Lifting / lowering of the drill bar pneumatically foot-operated Maximum pass-through height 400 mm 2 pneumatic workpiece holders adjustable on machine table Drill distance minimum 180 mm Drill distance maximum 1200 mm dimensions 2600 mm x 2100 mm x H 1700 mm
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 0 Technical data Min. internal grinding diameter: 0.5 mm Max. internal grinding diameter: 20 mm Grinding depth: 100 mm Centre height: 60 mm Distance between centres: 150 mm Workpiece spindle speeds: number (steps): 3 from: 560 rpm up to: 1000 rpm Spindle hole: 12 mm Taper in spindle:: 12 W Grinding spindle speeds: from: 90000 rpm up to: 120000 rpm Rotatable grinding spindle head (b-axis): + 45 / - 45 ° Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 900 mm Width: 750 mm Height: 1300 mm Various accessories: Automatic internal grinding support: AMI 25 Set of flanges Set of collets: W 12 Lamp Air spindle Set of service tools
used
We sell several 20 foot office and stay containers of different designs at reasonable prices. There are single containers, double containers, triple containers and quadruple containers. The containers are partly equipped with office furniture or cabinets. The location of the containers is Belgium. But we can organise mining and transport. Basic dimensions of the container length approx. 6055 mm, width approx. 2435 mm, height approx. 2350 mm. Price from 1500,- € + VAT depending on the number of units and execution.
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 18i-T Operating hours: 0 Technical data Centre height: 275 mm Distance between centres: 600 mm Swing over cross-slide: 150 mm Swing over bed: 600 mm Turning length: 610 mm Carriage: Longitudinal travel (Z-axis): 600 mm Transversal strocke (X axis): 460 mm Resolution: 0.001 mm Turret slide: number: 1 "DUPLOMATIC" Number of positions turret 1: 12 Fixed tools turret 1: 6 Driven tools turret 1: 6 Inner cone diameter: 20 x 20 mm Inner cone DIN: VDI 30 Taper in spindle: Camlock: A2-6 Inner taper type: B 32 / B 45 / F 48 Collet bore: 24 / 36 / 42 mm C axis Spindle speeds: stepless up to: 4000 rpm Inner taper type: F66 Internal spindle diameter: 60 mm Feeds: stepless longitudinal from: 0 mm/min up to: 5000 mm/min transversal ...
used
Stock No. : G15949v Machine type : Centering bore grinding machine Make : Technica Type : ZSM 510-810 Year of construction: 1988 specifications Workpiece clamping range (through..) 4 - 220 mm Workpiece length 50 - 1100 mm Workpiece weight approx. 120 kg Centering hole angle 30° Centering bore cone 2 - 60 mm Grinding spindle diameter 32 mm Depending on the abrasive, speeds of 13,000 to 45,000 rpm. Grinding spindle motor 0.25 KW Grinding head adjustment max. 160 mm Fine delivery max. 1 handwheel revolution 1 mm 1 tick mark 0.01 mm Weight approx. 460 kg Dimensions approx. 1.3 x 1.3 x 1.95 m 21/33.5/45/50 m/min Remarks / Accessories: incl. suction, etc.
used
- Cutting speed: 6 - 30 m/min - Saw blade dimensions: 400 (425) x 50 x 5 mm - Cutting range 45° flat: 180 x 40 mm - Cutting range 90° flat: 240 x 70 mm - Cutting range 90° round: 140 mm - Cutting range 90° square: 130 mm - Miter cut: infinitely variable 60 -/+ degrees - Saw blade feed speed: 0 - 1,200 mm/min - Minimum quantity lubricating system: PPS 401 115326 - Autom. Flat magazine FMA for rods: 1500 - 7000 mm - Control: Kaltenbach MULTI-COM - Chip conveyor - Total power: 5.5 kW - Machine weight: 4500 kg - Dimensions (W x D x H): 9.45 x 2.59 x 2.1 m - Power-on hours: 17290 h - Condition: very good details fully automatic universal saw, workpiece stop for inclined cuts to the left and right, work space lighting, section gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting of good parts, very well maintained system acce ...
used
Sw BA35 Mobile Mating Work Center Reconditioned :::TECHNICAL SPECIFICATIONS::: CNC Model: Siemens CNC version: 840D Tool attachment: iso 40 Spindle power: 22.5Kw Spindle Rpm: 10000 Number of tools: 36 X-Axis Stroke: 2650mm Y-Axis Stroke: 500mm Z-Axis Stroke: 500mm X Y Z Linear Axe Rapid Feeds: 40m/min Table size: 3600x500 ( 2x1800)mm Guides: roller CNC divider: yes Brand and partition model: Fibroplan Flange diameter: 340mm Rotation: continuous Chip evacuator: carpeted Machine equipment: 20 cones :::D IMENSION AND WEIGHT::: Length: 6300mm Width: 3200mm Height: 3200mm Weight: 12000Kg
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: NUM Technical data Min. grinding diameter: 3 mm Max. grinding diameter: 50 mm Centre height: 200 mm Axial motion: Longitudinal travel (Z-axis): 300 mm Cross travel (x-axis): 90 mm Work piece spindle head (B-axis) Swivelling range: -5 / 60 ° Possible grinding-spindle speeds: from: 55000 rpm Voltage 50 Hz 3x: 400 Volt Total power required: 10-15 kW Machine´s weight about: 2800 kg Overall dimensions machine: Length: 3000 mm Width: 2300 mm Height: 2200 mm Various accessories: Wheel trueing attachment Macnetic chuck diameter: 200 mm
used
Planausdrehkpof Wohlhaupter UPA 5 with accessories as shown. Cone ISO 50
used
The PRIMA POWER PLATINO 1530 laser was produced in 2012 by the Italian company Prima Power. Technical parameters: – machine time worked: 24800 hours – power: 2500.0 W – CNC control: Primach 20L – X travel: 3000.0 mm – Y travel: 1500.0 mm – working area: 3000 x 1500 mm – maximum sheet length: 3000.0 mm – maximum sheet width: 1500.0 mm – maximum sheet thickness: 15.0 mm – maximum load on the table: 250.0 kg – machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm – machine weight: 12000.0 kg Rofin Sinar DC 025 CO2 laser specification – type: CO₂ – laser: Rofin Sinar DC 025 – power: 2,500 Watt – power stability: + -2% FS – wavelength: 10.6 µm – gas type: He 67.7%; CO2 4.1%; N2 28.2% – beam propagation factor M2: 250 microseconds, 70 used resolutions – positioning accuracy: + -150 radians – operating condi ...
used
Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0 CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 1.5 mm Max. diameter: 165 mm Max. honing length: 406 mm Spindle speeds: number (steps): 12 from: 200 rpm up to: 2500 rpm Stroke speed: number (steps): 5 from: 80 s/min up to: 310 s/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.73 kW Machine´s weight about: 450 kg Overall dimensions machine: Length: 1500 mm Width: 1300 mm Height: 1600 mm Various accessories: Coolant system Automatic workpiece honing unit
used
Inv. Num. : 5479 Type: PC W 200 HA Producer: ŠKODA Created: 1987 Parameters: Spindle drive power: 77 kW Minimum spindle speed: 0.8 1/min Maximum spindle speed: 630 1/min Mechanical feed length axis X: 4000 mm Maximum feed speed axis X: 4000 mm/min Maximum feed speed axis Y: 4000 mm/min Maximum feed speed axis Z: 4000 mm/min Cone: ISO 60 Spindle diameter: 200 mm Maximum turning-out depth: 2000 mm Spindle extension: 1600 mm Base size: 6400 x 5100 mm Ride of the stand on the bed: 5000 mm
used
Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0 CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 1.5 mm Max. diameter: 165 mm Max. honing length: 406 mm Spindle speeds: number (steps): 12 from: 200 rpm up to: 2500 rpm Total stroke: 80 - 310 mm Stroke speed: number (steps): 5 from: 80 s/min up to: 310 s/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.73 kW Machine´s weight about: 530 kg Overall dimensions machine: Length: 1830 mm Width: 1250 mm Height: 1700 mm Automatic workpiece honing unit
used
Machine details Stock number 1105-03330 Machine type guide and pull spindle lathe Make ERNAULT-SOMUA Type Cholet 550 Year of construction 1990 Control type conventional Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WORK price Technical details Turning diameter over bed 550 mm Turning diameter via support 500 mm Turning length 1100 mm Tip height 250 mm Spindle bore 52 mm Inner cone 136 Spindle speeds 32-1800 rpm Feeds - bed slide / lengthwise 0.05-07 mm/w Feeds flat slide 0.033-0.45 mm/min Total power requirement 13 kW Weight of the machine ca. 2,3 t Space requirement approx. 2870 x 940 x 1400 m Information accessories: PARAT steel holder 4 STUCK 3 bake lining dia 250mm 2 AXIS DIGITAL
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 1.0 mm Max. internal grinding diameter: 50 mm Grinding depth: 200 mm Centre height: 132 mm Workpiece spindle speeds: from: 150 rpm up to: 1500 rpm Max. angle: 90 ° Possible grinding-spindle speeds: from: 16500 rpm up to: 120000 rpm Table speeds: stepless up to: 10.00 m/min Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 0.80 kW Drive for internal grinding spindle: 3.0 kW Machine´s weight about: 2000 kg Overall dimensions machine: Length: 1800 mm Width: 1000 mm Height: 1800 mm
used
Maximum diameter to turn on the bench 2,110 mm Maximum diameter to turn on trolley 1,600 mm Maximum distance between platforms 12,830 mm Spindle hole diameter 155 mm Cone on spindle no. 120 metric Cone on spindle (with reduction) no. 6 clamps Cone on the counterpoint (6-bit reduction) no. 120 metrics Maximum stroke of the counterpoint 400 mm DSeed from the tool support plane to the axis of the 80 mm centers Main engine power 100 HP Spindle speed from 0.9 to 90 rpm with continuous variation Longitudinal feed no. 36: 0.2 to 12.8 Transverse advances No. 36: 0.1 to 6.6 Metric fillets #26: 1 to 42 Whitwoth fillets #17: 0.5 to 11 Quick forwards Maximum permissible load on the tips 50-60 ton Refrigerant liquid system
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Min. grinding diameter: 5 mm Max. grinding diameter: 300 mm Max. grinding depth: 250 mm Max.workpiece length + steady: 1400 mm Axial motion: Longitudinal travel (Z-axis): 600 mm Work piece spindle head: speeds: from: 0 rpm up to: 1000 rpm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 3400 kg Overall dimensions machine: Length: 4350 mm Width: 1820 mm Height: 1860 mm Various accessories: Wheel trueing attachment Front grinding device redresser Coolant system Set of flanges for internal grinding Lamp Frontal grinding device Steady 3-jaw chuck diameter: (2x) 250 / 200 mm Internal grinding spindle:: ELECTRO number: 4 max. speed: VMS 40-5 40000 rpm max. speed: VMS 60-5 60000 rpm max. speed: VMS 15-5 15 ...
used
x-axis stroke 490 mm axle stroke Y150 mm axle stroke Z 140 mm spindle cone EX 32 / 25 Spindle speed 500-12,000 rpm Total installed power 5 KVa WEIGHT 1800 kg CNC NUM 720
used
platform diameter: 1450 mm (HYDRAULIC - hydraulic spindle) maximum diameter of the piece: 1650 mm maximum height of the piece under the crossbar: 1200 mm - under tool holder: 1000 mm maximum workpiece weight: 11000 Kg mobile crossbar running on the plinth: 900 mm fast movement speed: 400 mm/min. slow displacement speed: 100 mm/min positioning accuracy on the base: +/- 0.1/100 mm main drive engine power: 60 KW platform advancement range: 2-280 rot/min number steps speed change box 3 work support stroke (X-axis): 1542 mm vertical stroke work support sled (Z-axis): 1200 mm sled section: 250x250 mm Milling shaft cone: ISO 50 milling engine power: 22 KW milling shaft speed range: 20-2000 rot/min X-Z axis work feed range: 1-4000 rot/min fast forward: 6000 rot/min C axis feed (slow-regimo milling rotation): 1-360 °/min X, Z, C: 45 N ...
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Max. internal grinding diameter: 20 mm Centre height: 60 mm Distance between centres: 150 mm Workpiece spindle speeds: number (steps): 3 from: 560 rpm up to: 1000 rpm Spindle hole: 12 mm Taper in spindle:: 12 W Possible grinding-spindle speeds: from: 6000 rpm up to: 9000 rpm Rotatable grinding spindle head (b-axis): +45 / -45 ° Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 900 mm Width: 750 mm Height: 1300 mm Various accessories: 3-jaw chuck diameter Horizontal grinding spindle support Set of flanges Set of collets: W 12 Steady External grinding spindle
used
X-axis stroke 8,000 mm Y-axis stroke 1,000 mm Z-axis stroke 2,000 mm ISO 50 spindle cone Front bearing spindle diameter 100 mm Total table top 1,000x10,000 mm Maximum workpiece weight per 1m board length 2,500 kg Nominal main propulsion power 22 kW Spindle rpm range - continuous 11-2,500 per minute
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series Oi Mate TD Technical data Min. grinding diameter: 20 mm Max. grinding diameter: 300 mm Max. grinding depth: 300 mm Max.workpiece length + steady: 1200 mm Centre height: 300 / 430 mm Axial motion: Longitudinal travel (Z-axis): 650 mm Cross travel (x-axis): 150 mm Spindle head (u axis): 500 mm Work piece spindle head (B-axis): +/- 20 ° Max. axial speeds: Z axis (longitudinal travel): 12000 mm/min Grinding spindle head: Grinding spindle motor: 6.5 / 7.8 kW Machine´s weight about: 9500 kg Overall dimensions machine: Length: 5000 mm Width: 2300 mm Height: 2400 mm Various accessories: Wheel trueing attachment Coolant system Paper band filter Steady
used
Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 0.5 mm Max. internal grinding diameter: 15 mm Grinding depth: 75 mm Centre height: 60 mm Distance between centres: 125 mm Max. work piece diameter: 80 mm Workpiece spindle speeds: stepless from: 150 rpm up to: 1500 rpm Spindle hole: 12 mm Possible grinding-spindle speeds: up to: 120000 rpm Grinding table travel: max: 225 mm Table speeds: stepless from: 1 m/min up to: 8 m/min Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 0.3 kW Machine´s weight about: 650 kg Overall dimensions machine: Length: 1200 mm Width: 1150 mm Height: 1500 mm Various accessories: Wheel trueing attachment 3-jaw chuck: 2x Internal grinding spindle:: JS 80 / JS 120 number: 2 max. speed: 120000 rpm max. speed: 80000 rpm Set of c ...
used
ACES RACES: Transverse table (X-axis) 2,040 mm Vertical head (Y-axis) 1,600 mm Spindle axial (Z-axis) 810 mm Longitudinal wagon (W-axis) 1,200 mm Spindles: Rease undersea spindle diameter 127 mm ISO 50 Inner Cone Cutter spindle diameter 221.4 mm SPEED: Continuous change field spindle speed 2-1,250 RPM Advances: Continuous change field feed rate for all axes 1.5-3,000 mm/min Fast feed rate for all axes 3,000 mm/min Powers: Spindle Engine 20 Kw, Advanced Motors 26 Kw, Auxiliary Services 4 Kw table: Size 1.520x1.270 mm Range 8 ton
used
The CNC milling center HWACHEON VESTA 1050B 8K was manufactured in 2013. Technical parameters of the HWACHEON VESTA 1050B 8K milling center – CNC control: FANUC Series Oi-MD – table size: 1150×600 mm – X / Y / Z axis movement range: 1000/600/600 mm – maximum table load: 1000 kg – spindle speed: 8000 rpm – spindle power: 18.5 / 15 kW – spindle torque: 481/293 Nm – feed speed: 1-10000 mm / min – cone: BT-40 (BT-50) – number of tools: 24 – coolant tank capacity: 340 l – machine weight: 7200 kg – machining time: 14861 h Equipment of the HWACHEON VESTA 1050B 8K machining center – cooling through the spindle – chip conveyor – probes – cone BT-40
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: FANUC 18i-TB Operating hours: 9976 Technical data Number of axis total: 5 Swing over bed: 620 mm Turning diameter: 380 mm Bar passage: 52 mm Turning length: 540 mm Longitudinal travel (Z-axis): 600 mm Longitudinal travel (X-axis): 217 mm Transversal travel (y-axis): 101.6 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 12 Spindle speeds: 4000 rpm Power of driven tools: 5.5 kW Spindle nose: Inner cone diameter: 40 mm Taper in spindle: Camlock: A2-6" Collet bore: 52 mm Spindle speeds: stepless up to: 4500 rpm Back spindle:: A2-5" max. speed: 6000 rpm Spindle diameter: 45 mm Power of back spindle: 11/15 kW Rapid traverse:: 30 m/min Time under power: 13221 Hour Working time: 8781 Hour Voltage 50 Hz 3x: 400 ...
used
M. No.: 20051619 Basic Functions: Slit, Cross cut, Crease In-feed paper size: 210(W)x210(L) to 370(W)x520(L)mm Minimum finished size: 55(W)x45(L)mm Paper weight: 120 to 400gsm Depending on paper quality Operation: 4" Touch Screen Job memories: 263 preset jobs & 150 customized job memories. (100 MANU SET + 50 FLEX MODE) Feeding mechanism Upper belt tri-suction suction feed (Patented) Side blower Skew adjustment Side aligner Double feed detection Cut mark registration Feed tray stacking capacity: 100mm Speed 8.8 sheets / min. : SRA3 21up business card 11 sheets / min. : SRA3 8up post card 12.2 sheets / min. : SRA3 4up greeting card 15.4 sheets / min. : A4 2 cuts & 1 crease
used
bore capacity in steel (diameter): 75 mm arm length: 1700 mm workpiece height max.: 370 - 1700 mm total power requirement: 12 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m C S E P E L (Hungary) Radial Drill Model RFh 75/2000 Year 1977 Serial No. 61158 _______________________________________________________ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Distance between column and spindle centre, max. 1,700 mm Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Vertical adjustment of radial a ...
used
FMS SYSTEM: Machining Cell consisting of: Two 5-Axis machining Centres 8-Pool Pallet System(1250 x 1250mm x 3.000kg) Pallet Storage System X= 3.000 mm, Y= 2.000H/1.720V, Z= 2.000mm; A= 175°, B=0,001°; 640 Pos. ATC ; Spindle Taper HSK-A100; Spindle n= 3.000; Motor 50kW; Feeds: X,Y= 40m/min, Z= 30m/min Siemens 840D, Chip-conveyor; Serial No. 1450-03 and 1451-3, both from 2003 FR: À VENDRE MAINTENANTFMS SYSTEME ; 8 Pos. Piscine à palettes (1250 x 1250mm x3.000kg). 2x MCM Jet Five Mirror 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS, X= 3.000, Y= 2.000H/1.720V, Z= 2.000mm ; A= 175°, B=0,001° ; 640 Pos. ATC ; Cône de broche HSK-A100 ; Broche n= 3.000 ; Moteur 50kW ; Alimentation : X,Y= 40m/min, Z= 30m/minSiemens 840D, convoyeur à copeaux ; numéros de série 1450-03 et 1451-3, à partir de 2003
used
max. wheel diameter: 80 mm gear width: 120 mm max. module: 3 min. module: 1 control: SIEMENS 840 C total power requirement: 30 kW weight of the machine ca.: 7500 t dimensions of the machine ca.: m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 ______________________________________________________ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rate ...