milling used for sale

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- technically efficient, ready to work – after full service - 6 spindles - automatic - variable angle lower spindles - spindle top 90 degrees

bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool holder, milling holder, milling tool, adapter, Weldon -Manufacturer.Gewefa, spindle tool type SK50x49x300-M24 -Hole: SK50/ Ø 29 x 300 mm -Total dimensions: Ø 98 x 440 mm -Weight: 7.0 kg

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Milling chuck: SK50 2 pieces -Tool holder: Ø 32/16 mm -Price/Sale: complete -Overall dimensions: 355/180/100 mm -Total weight: 10.4 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Bore: Ø 56 mm -Guide slide: 180 mm movable -Hole spacing: 213/170 mm, Ø 18 mm -Dimensions: 285/250/H460 mm -Weight: 50 kg

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 500 mm z-travel: mm Control: Heidenhain tool taper: SK 40 : 13,5 kw turning speeds: 3150 U/min total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm Control: Heidenhain Tnc table-size: 900 x 460 mm turning speeds: 4000 U/min total power requirement: kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 3 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool, adapter, clamping unit -Manufacturer: Walter, 41 pieces holder/clamping units SK50 -Various types: see photos, more pictures can be sent -Price/sale: complete -Total dimensions: 700/600/260 mm -Weight: 129 kg

Tool holder, milling holder, milling tool, cutter head -Manufacturer: Wohlhaupter, tool holder 195 015 TO13815 -Take: SK40 -Mandrel: 69871 ANSI 40-SMA 22/63 -Dimension: Ø 64 x 160 mm -Weight: 1.3 kg

power capacity: 0 kW tool adaptor: 0 total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1100 mm y-travel: 600 mm z-travel: 500 mm Control: Heidenhain TNC 335 B tool taper: SK40 table surface - upper: 1650 x 700 mm table face - lower: 1870 x 300 mm spindle speed:: 3000 Upm spindle motor: ca. 9 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal and vertical milling Position change of the head is done manually Vertical head with drilling quill, drilling depth 100 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 22.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: SIEMENS 840 D milling head -swivable: 0,001/0,001 Grad milling head: Universalfräskopf 45° Internal cooling system: 20 bar Chip coveyor: ja Tools changer: 30 pos. coolant: 1.100 l Tool taper: DIN 69871A ISO 50 total power requirement: 45 kW weight of the machine ca.: 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /IN ...

Tool holder, milling holder, milling tool, cutter head -Recording: SK40 5 pieces Sizes: see pictures Price: complete -Box dimensions: 270/270/H160 mm -Weight: 15.2 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 2 pieces collet holder -Type: Autolock -Adjustment: SK50 -Tension sleeves: Ø 25/16 mm -Cutter: Ø 44/11.5 -Price: complete -Dimension total. 175/285/100 mm -Total weight: 9.2 kg

Tool holder, milling holder, milling tool, collet holder, milling chuck -Manufacturer: Nikken, Multi-Lock Milling Chuck -Type: MCA50F-32HM-SL -Tensioning sleeve: Nikken KM32-16 -Dimensions: Ø 98 x 220 mm -Weight: 4.5 kg

x-travel: 3500 mm y-travel: 900 mm z-travel: 1000 mm Control: heidenhain tnc 415B total power requirement: 22 /spindel kW weight of the machine ca.: 16.5 t dimensions of the machine ca.: 7.2x3.9x3.2 m Make SORALUCE Type Soramill SL 5000 Built in 1995 Control type HEIDENHAIN TNC 415 B Table size (mm) 5000 x 800 mm X out (mm) 3500 Y-off (mm) 900 Z-off (mm) 1000 Maximum table load 12,5 ton Speed (RPM) 20-. 2,000 Tool holder ISO 50 Feed along (mm/Rev) 5 - 10000 mm / min. Rapid traverse 12 mtr/min. Gesamtleistung(kW) 22 Length (mm) 7250 Width (mm) 3900 Height (mm) 3200 Weight 16500 kg Additional information Automatically indexierender Swivel Head with 2 x 144 positions (2.5 ° pitch) in two levels above the control programmable Cooling medium institution The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5000 mm y-travel: 3100 mm z-travel: 1200 mm Control: total power requirement: 20/27 kW weight of the machine ca.: 65 t dimensions of the machine ca.: 15x6,2x6 m Stock number 1110051 Machine type CNC Portal milling machine Make CORREA Rapid type 50 Year of manufacture 2004 Control type HEIDENHAIN Table size (mm) 5000 x 2000 mm X out (mm) 5000 mm Y-off (mm) 3100 mm Z-off (mm) 1200 mm Table load Max 15 ton Speed (RPM) Max 18,000 Tool holder HSK 63 Gesamtleistung(kW) 20/27 Length (mm) 15000 Width (mm) 6200 Height (mm) 6000 Weight 65 ton Additional information Tool changer for 24 tools 5-axis gesteuerd The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6000 mm y-travel: 2000 mm z-travel: 3000 mm Control: heidenhain TNC 415 total power requirement: 34 kW weight of the machine ca.: 31 t dimensions of the machine ca.: 7000 mm m Stocknumber 1110055 Type of machine CNC Floortype milling machine Make ZAYER Type KCU6000 Build in 1992 Type of control Heidenhain TNC 415 X-stroke (mm) 6.000 Y-stroke (mm) 2.000 Z-stroke (mm) 3.000 Speeds (Rpm) 20 - 1.800 Admission in spindlehead BT50 Feeds X (mm/R) 5 - 5000 mm/min Feeds Y (mm/R) 5- 5000 mm/min. Feeds Z (mm/R) 5- 5000 mm/min. Rapid feeds 10.000 mm/min. Total Power (KW) 34 Lenght (mm) 11.000 Width (mm) 2.500 Height (mm) 7.000 Weight 31.000 Kg Additional information Juaristi MG6 turntable: 1500 x 1200 mm Cooling system: 2.5 Bar Tool cooling: 15 Bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool, -Manufacturer: May, milling adapter: SK50 with fine adjustment -Type: FGK3/SK50/N M14-M30 -Dimensions: Ø 98 x 300 mm -Weight: 5.9 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 3 pieces collet holder -Type: Autolock -Adjustment: SK50 -Tension sleeves: Ø 10/12/25 mm -Price: complete -Dimension total: 250/250/100 mm -Total weight: 14 kg

x-travel: 14.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: Heidenhain Itnc 530 total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 1000 mm z-travel: 1000 mm total power requirement: 22 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 10.000 x 6.000 x 4.250 m Brand: Soraluce Type: Soramill 4 TF4 CNC brand: Heidenhain CNC model: TNC 415 B Year of make: 1995 Table length: 4.000 mm Table width: 1.000 mm X: 4.000 mm Y: 1.000 mm Z: 1.500 mm Spindle taper: ISO50 Speed: 3.000 RPM Huron milling head Motor: 22 kW Machine dimensions (lxwxh): 10.000 x 6.000 x 4.250 mm Machine weight: 25.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool, -Milling adapter: SK50 -Type: 50x32x200 M24 -Dimensions: Ø 97 x 140 mm -Weight: 2.7 kg

Tool holder, milling holder, milling tool, test mandrel -Test pin: Ø 50 mm, with tip -Adjustment: SK50 -Dimensions: Ø 97 x 350 mm -Weight: 5.3 kg

X-axis: 13,000 mm Y-axis: 4,500 mm Z-axis: 1,000 mm Distance between stand: 6,500 mm C-axis: 190º A-axis: 110º Rapid speed XYZ: 15,000 mm/min. Rapid response AC: 10 tpm CNC control: Siemens 840D Spindle mounting: HSK A63 Spindle speeds: 30,000 rpm. Spindle power: 20 kW Tool changer: 20 positions Torrestool tables: 16 pieces X-axis: 11,500 mm Y-axis: 3,500 mm Z-axis: 750 mm Country of origin Spain Machine dimensions LxWxH: 19,000 x 11,000 x 6770 mm Machine weight: 70,000 kg

Tool holder, milling holder, milling tool, adapter -Adaptation: SK50 13 pieces adapter -Tool holder: MK5/MK4/MK3/MK2 -Various types: see photos, more pictures can be sent -Price: complete -Dimensions: 740/500/100 mm -Weight: 54.9 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Inside holder: Ø 26 mm -Dimension: Ø 100 x 220 mm -Weight: 5.8 kg

Friedrich Deckel FP 2 LB tool milling machine This universal milling machine FP 2 LB from the well-known German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable basic body and is designed as a travel column machine i.e. the machine does not lose accuracy should heavy parts (up to 1000 kg) be clamped. Another special feature is the so-called inclined bed of 45 degrees. Thus, after dismantling the universal table, it is possible, especially V-engine blocks with 90-degree cylinder angle (e.B. amerik. V8) directly clamp and process. The long travel distance of 800mm is also an advantage in this case. Lid FP 2 LB universal swivel/tilt table (± 45° / ± 15°) Lid Universal Divider Vice 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm From 01.07.21 the machines are ready for collection. Dismantling and transport by the buyer.  ...

CNC Bedmilling Machine Make: SACHMAN Model: RP 3 x 1800 mm Year: 1996 ( only 5000 hours ) Control: Heidenhain TNC 407 Table: 2000 x 750 mm Speeds: 22 - 3500 rpm Motor: 15 kW Oil cooled universal TVK millinghead

fully functioning used 3 axis milling machine, brand lid, type FP2, with vice, and many accessories.

Tool holder, milling holder, milling tool, cutter head, face milling cutter, shell end mill, Side milling cutter -Manufacturer: Wodex, side milling cutter -Adjustment: SK50 -Size: Ø 200 x 12 mm -Dimensions: Ø 200 x 220 mm -Weight: 6.3 kg

Tool holder, milling holder, milling tool, -Milling mounts: 5 pieces mount MK3 -Sizes: see pictures -Price: complete -Dimension box: 665/125/H30 mm -Weight: 6.1 kg

Tool holder, milling holder, milling tool, cutter head -Milling fixtures: 12 pieces of different designs, see photo parts list -Sizes: see pictures -Price: complete -Dimension box: 200/330/H180 mm -Weight: 14.4 kg

Control: Dialog 11 with new MCP card Travel range: x-800 y-600 z-550 mm Spindle speeds: 18 – 6300 rpm Pinole by hand: 80 mm Recording: SK 40 Feed: 2 to 10000 mm/min Rapid response: 10000 mm/min Weight: approx. 4050 kg With full cab, chip conveyor, electr. Handwheel Installation dimensions: L: With controller and chip conveyor approx. 4200 mm (without conveyor approx. 3200 mm) B: approx. 3800 mm (With space to open door E-cabinet approx. 4600 mm) H: approx. 2400 mm Can be visited under electricity.

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Copy router: Wegoma SK6 -Copy router: swiveling -with support rail length: 1910 mm -Motor: 220 V 1.4 kW -Spindle speed: 22000 rpm -Dimensions: 500/460/H1530 mm -Weight: 46.5 kg

Year of construction 2001 Siemens 810D Operating hours 1988 Travel distances 350 x 240 x 340 Spindle speed 20 - 6300 Drive power 6.3/10 KW Total connection power 15 kW Tool holder SK40 Accessories: el. Handwheel Spühlpistole Universal swivel rotary table 400 x 280 mm, Rotation range 360 °, swivel range +105/-15 ° with electronic angle display Coolant device

Tool holder, milling tool holder -Number: 2x SK50 recordings -various: versions -Price/Sale: only complete set -Weight: 12 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.15/0.22 kW 11160/17250 rpm at 133/200 V/200/300 Hz -Shaft holder: Ø 15 x 15 mm -Dimensions: 190/70/H95 mm -Weight: 1.8 kg

Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, clip-on holder -Milling mount: mount MK4 -Measures: see pictures -Dimension: Ø 56 x 670 mm -Weight: 7.5 kg

Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, mounting bracket -Milling tool holders: 10 pieces MK5 mounting boring heads/reducing sleeves/spindle tools/mounting holders -Sizes: see pictures -Price/Sale: complete -Overall dimensions: 670/470/H80 mm -Total weight: 41.7 kg

DECKEL FP4 NC Fraesmaschine Dialog 4 Dialog 4 control, working range 560 x 500 x 450 mm, pinole stroke 80 mm, 18 spindle speeds 31.5 -6300 min, folding head, tool holder SK 40, feed speed 1-4000 mm/min, rapid traw 6000 mm/min, table load 800 kg, weight 2070 kg, total connection value 16 kVA.

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different recording sizes: see pictures -Sale: only complete -Weight: 12 kg

Tool holder, milling holder, milling tool -Number: 7x SK40 mounts with tool carrier -Executions: different -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Dimensions: 590/120/H210 mm -Weight: 12 kg

Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm -Weight: 28 kg

I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Leuco DIA wood router: 200X12/SB11X30 -Speed: 3800 - 6500 rpm -DP222145-80261567 -with: box -Dimensions: 305/305/H40 mm -Weight: 2.7 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Leuco DIA wood router: 200x10/SB9x30 -Speed: 3800 - 6500 rpm -DP222145-80261568 -with: box -Dimensions: 300/300/H80 mm -Weight: 4.1 kg