mikron haas used for sale

HAAS MINI MILL HE CNC vertical milling center was built in 2006 in the United States. This compact machine, with its emphasis on high productivity and precision milling, is ideal for any production facility, even during the most intensive challenges. Behind the sliding doors there is a large work space equipped with a T-slot table, a 10-position tool magazine and a reliable high-speed spindle. Machining programmes are created in just a few steps in the intuitive HAAS CNC controller, which performs cycles fully automatically and minimises the operator’s need to operate the machine. The HAAS CNC vertical machining center weighs 2200 kg. Technical data of the HAAS MINI MILL HE CNC milling machine - CNC controller: HAAS - feed rates in the X/Y/Z axis: 406/305/254 mm - work table surface (L x W): 914 x 305 mm - maximum workpiece weight: 227 kg - maximum spindle rotational speed: 600 ...

Inv. Num. : 7243 Type: VF-3 BHE Producer: HAAS Created: 2007 Parameters: Work table length: 1219 mm Work table width: 457 mm Maximum spindle speed: 7500 1/min X-axis travel: 1016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Machine weight: 5670 kg Equipment: Tool Holder Vices (2 pieces) Tool Probe 3D Probe

PLC control, electronic module, interference filter, power supply line filter, ballast, line filter, power line filter, three-phase filter, three-phase line filter, filter module, line interference filter -Manufacturer: Schaffner, power supply line filter from CNC milling machine Mikron UME 600 -Type: FS4787-30-33 -Voltage: 3x440 VAC/50 - 60Hz -Dimensions: 250/190/H65 mm -Weight: 3.3 kg

turning diameter: 457 mm turning length: 584 mm control: total power requirement: 22,4 kW weight of the machine ca.: 7,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1626 mm, 813 mm, 762 mm

Haas VF 6 / 5 axles, Built in 2004, Control Haas, Travel X/Y/Z 1626 / 813 / 762 mm, 4+5 axle retrofitted in 2008, Tool changer 40 times, Tool holder SK 40, max. table load 1,800 kg, Table size 1600 x 800 mm, max. spindle speed up to 7,500 rpm, approx. 6600 operating hours,

5-axis machining center UMC 750SS The machine comes from a stopped automotive project and has very few productive and operating hours. Producer: HAAS Manufactured in: 2018/19 Table diameter: 500 mm Maximum table load (evenly distributed): 300 kg Spindle drive power: 22.4 kW (30PS) Number of tools in the magazine: 40 + 1 Maximum spindle speed: 15000 1 / min X-axis travel length (mechanical feed): 762 mm Travel length Y-axis (mechanical feed): 508 mm Travel length Z-axis (mechanical feed): 508 mm SK 40 Fast feed: 30.5 m / min IKZ 1000PSI KSS fine filter Machine height: 2800 mm Machine length: 4270 mm Machine width: 2350 mm Machine weight: 6464 kg

NH3 refrigeration system., Additional title: refrigerant NH3, Brew water flow: 5 m3/h against 20 m, Ice water flow: 15 m3/h against 20 m, Refrigerant capacity: 85 kg NH3, Compressor capacity: 145 m³/h, Power: Q0: 2 x 119 kW, Length: 0,945 m, Width: 0,54 m, Height: 0,765 m, Weight: 510 kg, Features: 2x compressors: 145 m³/h, 26 kW with FC, 37 kW nominal output; NH3 separator mounted on frame, with brewing water condenser and ice water condenser; air condenser on frame 3x 2.95 kW; heat recovery condenser with pump; 2 x ice water pumps (2.2kW, 15m3/h vs. 20m); brewing water pump (1.1kW, 5m3/h vs. 20m); expansion tank, max. permissible operating pressure: high pressure side: 22 bar, low pressure side 16 bar

In perfect condition. two axes. Worked very little. Most of the time he stood. 2011 release. The control stand is practically new: no scratches or scuffs. Absolutely everything works. Accuracy 1 weave. The guides are not worn. The beating of a lathe chuck (diameter 250 mm) on zeros. Advanced release: spindle speed up to 3000 rpm, automatic tool change (4 positions). Heavy cast bed. Pistol blowing system. There are handles for manual turning if desired (according to the indicators on the scoreboard), which is very convenient when tying or grinding something quickly and piece by piece. Spindle bore diameter Ø 76 mm Turning diameter over support 282 mm. Distance between centers 1219 mm. You can come turn it on and see how everything works. Check accuracy. For sale due to the need to purchase an expensive CNC milling machine. When buying, we will teach you how to work, we will sh ...

axis travel: X 1626 mm; Y 1270 mm; Z 813 mm. Nominal power 22.4 kW. 2-speed Gamma gearbox. ISO50 spindle cone. Tool magazine with 30 positions. Fourth integrated axis diameter 762mm. Water passage through spindle with high pressure pump. Screw type chip conveyor. This is a machine in excellent condition, fully functional and connected, with very few hours of work. it is available to be viewed or for any tests.

The vertical machining center HAAS VF 6B/40HE is in good technical condition. HAAS CNC control system ( FANUC compatible ) Cooling device with pump including 300 l tank. 4th axis prepared with a connector for connecting a continuously controlled rotary table. Clamping surface of the table: 1626x711 mm Longitudinal movement of the table - x-axis: 1650 mm Transverse table movement - y axis: 800 mm Vertical movement of the table - z axis: 762 mm Spindle taper: SK 40 Spindle speed: 0-7500 rpm Number of places in the stack: 24 + 1 positions pcs Max. workpiece weight: 1814 kg For NC rotary table A: : 999.999 Spindle drive:: 15kW vector spindle control - double DELTA winding Basic torque:: 340 Nm

We hereby offer this used Haas Minimill HE vertical machining center from 2008, located in Poland. This vertical machining center is powered by a high-precision Haas control unit, ensuring exceptional accuracy and efficiency. With a generous working area measuring 914 x 305 mm, a rapid 6000 rpm spindle speed, and a robust 6 kW motor, the Haas Minimill HE is your ultimate choice for precision machining and top-tier manufacturing. Technical specifications: Year: 2008 Made in: USA Control unit: Haas X-Axis travel: 406 mm Y-Axis travel: 305 mm Z-Axis travel: 254 mm Table length: 914 mm Table width: 305 mm Spindle speed: 6000 rpm Spindle taper: SK 40 Motor power: 6 kW Tool magazine: 10 pieces Dimensions: Length: 2000 mm Width: 2000 mm Height: 2500 mm Weight: 2200 kg Features: -Enlarged Z axis departure by approx. 70 mm working compared to the standard Minimill versio ...

HAAS VF-5D/40HE 4-axis vertical milling center YOM 2009 Haas Control Complete with 4th Axis unit X- longitudinal axis 1270 mm Y- cross axis 660 mm Z- vertical axis 635 mm Distance Between Table And Spindle Nose: 178 – 813 Mm Table 1320 X 585 mm Load Capacity 1815 kg Spindle Rotation Speed 7500 Rpm Speed Range 2 Spindle Taper ISO 40 Rapid Speed 18000 mm/min. Working Speed 12700 mm/min. Through Spindle Coolant Tool Magazine 20 Positions Power 15 kW Weight 7000 kg

We hereby offer this used Haas TM2-P Vertical Machining Center from 2019. This robust machining center features a Haas control unit, offering precision and versatility. Technical specifications: Year: 2019 Made in: USA X-Axis travel: 1016 mm Y-Axis travel: 406 mm Z-Axis travel: 406 mm Feedrates X-Y-Z: 10.2 m/min Table length: 1466 mm Table width: 267 mm Table load: 159 kg Spindle nose to table: 508 mm Motor power: 5.6 kW Spindle speed: 6000 rpm Spindle taper: BT 40 Dimensions: Length: 3230 mm Width: 1980 mm Height: 2540 mm Weight: 2295 kg Additional Details: This machine comes complete with essential tool holders, milling heads, drill heads, and an extra batch of cutting materials (approximately 25 pieces). Elevate your metalworking capabilities with this reliable Haas TM2-P.

The machine is in perfect condition, only aluminum has been machined on it. X axis: 762 mm Y axis: 406 mm Z axis: 508 mm Spindle speed 12000 rpm-1 Work table dimensions 914 x 356 mm Machine dimensions L x W x H 2570 x 2510 x 2570 mm Machine weight: 3540 kg Accessories: probes, tool holders approx. 10 pcs., chip conveyor By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition, after prior agreement it is possible to test it. spindle drilling through draw tube 73 mm, feed 250 mm, workpiece remover /slide/, chip collector, turret head 12 tools, - revolving diameter above bed 762 mm - maximum cutting diameter 432 mm - distance between tips 610 mm - maximum cutting length 864 mm - rod capacity 76 mm - spindle motor power 22 kW - turret 12 positions

Inv. Num. : 6849 Type: VF 2SS Producer: HAAS Created: 2019 Parameters: Duty cycle: 6825 h Hours: 2885 h Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum spindle speed: 12000 1/min Minimum distance between the spindle axis and the table: 102 mm Maximum distance between the spindle axis and the table: 610 mm X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Spindle power: 22.4 kW Equipment: Grip SK40 (10x) Probe Renishaw

Machine in good technical condition, possibility of testing after agreement. Table clamping surface: 914x356 mm X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Spindle speed: 12000 - /min. Number of controlled axes: 3 Spindle clamping cone: CT/ BT 40. Max. table load: 680 kg X-axis rapid traverse: 35.5 m/min Y-axis rapid traverse: 35.5 m/min Z-axis rapid traverse: 35.5 m/min Power of the main electric motor: 22.3 kW. In 2023 - changed linear guidance.

Description: Serial number: 2786 Control: SIEMENS SINUMERIK 840D/additional program 'Sequence list' Technical data (without guarantee): Travel distances: X-axis: 400 mm Y-axis: 270 mm Z-axis: 250 mm A-axis (dividing head): 360° C-axis (spindle axis) Tool changer: Number of tools: 4 Grinding spindle: HSK 50/12 kW max./8000 rpm Incl. ram handling Incl. the tool clamping device (SK 50 holder) which can be seen in the last pictures Important note: without centrifuge and oil tank Coolant system not included in the scope of sale and delivery Also without the clamping device for workpieces shown in the photos and videos weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 2,350 x 1,750 x 2,800 mm

The machine is in excellent technical condition. X Stroke (mm): 213 Z stroke (mm): 572 Spindle speed (rpm): 5000 Spindle power (kW): 14.9 Chuck Size (Right): 8 Spindle bore (right) (mm): 51 Driven tools (rpm): 4000 Horse: Yes The lathe worked only in one-shift operation. Dimensions: 3620 x 2290 x 2340mm Weight: 4000 kg By prior arrangement, the possibility of a tour in progress.

Description: 'Specifications Character: HAAS Type: HS-2 Steering: HAAS Year of construction: 1999 Plate size: 500 x 500 mm Number of pallets: 2 X: 1,000 mm Y: 1,000 mm Z: 1,000 mm Top name spindle: BT 40 Positions in tool magazine: 40 Max. workpiece height: 1,000 mm Clamping transport Movable column Transport dimension: 4,400 x 3,100 x 3,100 mm Approx. Onsite Dimension. (l x w x h): 4,400 x 4,300 x 3,100 mm, weight approx.: 11,500 kg

Description: Motor SIEMENS 220/380 V, 0.55 kW, 2770 rpm Magnetic plate 00110-15 B 3, approx. 250 x 150 mm max. grinding wheel diameter 180 mm weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 900 x 1,600 mm

Key data: 1016 mm, 508 mm, 635 mm

Travel X-axis 1016 mm Y-axis 508 mm Z-axis 635 mm Clamping table Table clamping surface 1220x457 mm Number of T-slots 5 Max. table load 1580 kg Milling spindle Spindle speed 10000 rpm Spindle holder ISO 40 Spindle drive 11 kW Feed Feed X-Y-Z axis 0-7620 mm/min Rapid traverse X-Y-Z axis 18 m/min Tool changer Number of tools 24, Side-mounted tool changer Control Haas Automation, electric handwheel 4.Axis machine prepared for a 4.axis Coolant coolant system 200 lt. with chip conveyor Internal cooling by the spindle Remark Oil mist extraction and 2 foot switches for pneumatic actuation of mechanical vices not included

Key data: 762 mm, 406 mm, 508 mm

Travel X-axis 762 mm Y-axis 406 mm Z-axis 508 mm Workbench Clamping surface 356x914 mm Number of T-slots 3 Max. table load 1360 kg Milling spindle Spindle speed 7500 rpm, gearbox Spindle holder ISO 40 Spindle drive 7.5 kW Feed Feed X-Y-Z axis, max 16.5 m/min Rapid traverse X-Y-Z axis 25.4 m/min Tool changer 20 tools Haas Automation Control, Electronic Handwheel 4.Axis machine is prepared, axle card and wiring Coolant coolant system 200 lt. with chip conveyor Programmable coolant nozzle Accessories Table Probe System Note: The clamping and machining tools shown in the illustrations are not included in the scope of delivery

Key data: 508 mm, 406 mm, 508 mm

Tech.Data-Tech. Data X/Y/Z-AXIS-X/Y/Z-axis mm 508x406x508 4th/5th axis-4th/5th. Axis Rundtisch mit Reitstock – Round table with Tailstock Clamping table size mm 660x356 Milling head BT 40, 7500 rpm CNC Control-CNC Control Haas Automation WZ changer tool changer 20 If you are interested in this machine, please contact us, we will be happy to send you a detailed offer If you are interested in this machine, please contact us and we will be happy to send you a detailed offer

x-travel: 1016 mm y-travel: 508 mm z-travel: 635 mm control: Haas total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Regular service, freshly serviced after hydraulic cylinder GO, oil changed, belts replaced and overall in very good condition. Accessories-tool holders, jaws, high pressure cooling. Turning diameter over bearing: 533 mm, max. turning length: 660 mm, feed diameter: 250 mm, spindle clearance: 65 mm Spindle speed: 3,400 rpm, spindle power: 22.4 KW, number of tools: 12 x VDI 40 tool probe, including tool holders.

Description: Serial number 28133 , Diameter of the rotary table 250 mm , Including fully integrated swivel rotary table, as well as the tool holders and tools located on the tool changer z-motion: 635 mm, x-motion: 1,270 mm, y-motion: 508 mm, control: HAAS, table surface area l x w : 1310x455 mm, taper: BT 40, toolchanger positions: 20, turning speed range: 8,000 rpm, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 2,800 x 3,000 mm

Key data: 508 mm, 406 mm, 384 mm

Machine Details Stock-No. 1105-04000 Type of machine milling machining centers - vertical Make HAAS Type DT 1 Year of manufacture 2007 Type of control CNC Storage location HAGUENAU FRANCE Country of origin USA Delivery time IMMEDIATELY Freight base EXW Technical details X-Travel 508 mm y-travel 406 mm Z-Travel 394 mm turning speeds 15000 rpm Tool Changer 18 Rapid Travel X/Y/Z 15.2 m/min total power requirement 11 kW weight of the machine approx. 2 t dimensions of the machine approx. 2 x 2 x 2 m Additional information very nice WITH MAGSIN 20 TOOLS BT 30 TABLE 660 X 281 MM

Description: Serial number 1147287 Including the tool holders and tools located on the tool changer, as well as a measuring probe Attention: The tool holders on the shelf and the machine vices attached to the table are not included in the scope of delivery! z-motion: 635 mm, x-motion: 1,270 mm, y-motion: 508 mm, control: HAAS, table surface area l x w : 1320x480 mm, taper: BT 40, toolchanger positions: 20, turning speed range: 8,000 rpm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 2,800 x 3,000 mm

Description: Serial number 24636 , Including the tool holders and tools located on the tool changer. Attention, the machine vices attached to the table are not included in the scope of delivery! z-motion: 635 mm, max. workpiece weight between centers: 1,588 kg, x-motion: 1,016 mm, y-motion: 508 mm, control: HAAS, table surface area l x w : 1219x457 mm, taper: BT 40, toolchanger positions: 20, turning speed range: 7,500 rpm, feed range: 0 -16500 mm/min, rapid motion: 25,4 m/min, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 2,800 x 3,000 mm

Description: Round table diameter approx. 180 mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 60 kg

This HAAS UMC-500SS Vertical Machining center was manufactured in the year 2021 in the United States. It is equipped with a HAAS control unit and has 5 axis. The machine has a spindle speed of 15000 rpm.

This HAAS UMC750SS Vertical machining centre was manufactured in the year 2019 in the United States. It is equipped with a HAAS control unit with Ethernet interface. The machine disposes of a 1 GB of memory for programs, a 15” COLOR LCD monitor, a USB port with memory lock key and a power failure detection module. There are a lot of options fitted on the machine that can be included.

This AgieCharmilles MIKRON VCE 1400 PRO Vertical machining center was manufactured in the year 2009 in Switzerland and has 30978 hours, of which 13309 are spindle hours. It is equipped with Heidenhain iTNC 530 control unit and has 3 axis. The machine has a spindle speed of 100 - 10000 rpm, and includes a RENISHAW 3D IR Measuring Probe MP12, Tool measuring probe 3D TS27, and a Set of tool holders as additional equipment, is in very good condition and well maintained.

This HAAS EC-1600 ZT Horizontal Machining center was manufactured in the year 2020 in the United States and has 6391 working hours. It is equipped with a HAAS NGC control unit and has 4 axis. The machine has a spindle speed of 7500.

This HAAS TM-2HE (2007) Vertical Machining Centre was manufactured in 2007 in the United States. It is equipped with 3 axes (X = 1016 mm / Y = 406 mm / Z = 406 mm) and has a spindle speed of 6000 rpm. Included with the machine are 1x vise (150 x 300 mm), 1x Haimer 3D probe and around 15x tool holders. The machine has 2892 cutting hours, 7793 power on hours, is still under power and can be inspected at any time.

This HAAS VF-3SSYT Vertical Machining centre was manufactured in the year 2019 in the United States. It is equipped with a HAAS control unit and has 3 axis. The machine has a spindle speed of 12000 and a cone type BT 40.

This HAAS UMC-500 Universal Machining center was manufactured in the year 2020 in the United States. It is equipped with a HAAS control unit and has 5 axis. The machine has a spindle speed of 15000 rpm.

This HAAS VF-3YT/50 Vertical Machining centre was manufactured in the year 2017 in the United States and has 238 production hours. It is equipped with a HAAS control unit and has 3 axis. The machine has a spindle speed of 12000 rpm.

This AGIE CHARMILLES MIKRON HSM 400 LP Vertical Machining center was manufactured in the year 2013 in Switzerland and has 18727 production hours, of which 18377 are spindle hours. It is equipped with a HEIDENHAIN 530 control unit and has 3 axis. The machine has a spindle speed of 42000 rpm.

This HAAS VF-2 Vertical Machining center was manufactured in the year 2018 in the United States and has 7086 production hours, of which 3019 are cutting hours. It is equipped with a HAAS control unit and has 3 axis. The machine has a spindle speed of 8100 rpm, is in good condition and well maintained.

This HAAS UMC-500SS Universal Machining center was manufactured in the year 2021 in the United States. It is equipped with a HAAS CNC control unit and has 5 axis. The machine has a spindle speed of 15000 rpm.

This HAAS VF4SS used vertical machining centre was manufactured in the year 2019 in the United States. It is equipped with a HAAS control unit and has an Ethernet interface. The HAAS 5th axis transmission allows the use of a HAAS rotary table or indexer. The machine disposes of a 1 GB of memory for programs, a 15” COLOR LCD remote monitor, a USB port with memory lock key and a WiFi connection for HAAS control. There are a lot of options fitted on the machine that can be included.

This HAAS VF4-SS Vertical Machining Centre was made in the year 2019 in the United States. It is equipped with a Haas control unit and BT 40 tool holder with 30 slots in storage. As a 3 axis machine it has a spindle speed of 12000 rpm. With only 2,311 cutting time hours it comes in a very good condition.

This HAAS VF-7/40 Vertical Machining center was manufactured in 2014 in the United States. It is equipped with a HAAS control unit. The machine dispose of a 3 axis: X (2134 mm), Y (813 mm) and Z (762 mm). It is included a ATC Random tool changer with a tool station which has 24 positions.

This HAAS VF-5/40TR Vertical Machining center was manufactured in the year 2018 in the United States. It is equipped with a HAAS control unit and has 5 axis (removable 210 mm 2-axis thumb rotary table). The machine has a programmable Coolant Nozzle; a multi-position nozzle that automatically directs coolant precisely at the cutting tool. It has a spindle speed of 8100 rpm.

This HAAS VM3 Vertical Machining center was manufactured in the year 2017 in the United States. It is equipped with a HAAS control unit. The machine has a spindle speed of 12000 rpm.

Inv. Num. : 7421 Type: SL 30 HE Producer: HAAS Created: 2001 Parameters: To GO Control system: HAAS Spindle bore: 65 mm Max. turning length: 660 mm Number of tools in the storage container: 12xVDI40 pieces Maximum turning diameter over bed: 533 mm Spindle speeds: 3400 1/min Maximum main spindle power: 22.4 kW Equipment: Bake Tool Holder High-pressure cooling Tool Probe

This 5-axis vertical machining center was manufactured in 2003. The HAAS VR-11 features extensive travel capabilities with 3050 mm in the X-axis, 1016 mm in the Y-axis, and 762 mm in the Z-axis, ensuring large-scale precision. Its equipped with a HAAS-based control unit for intuitive operation, a 15,000-rpm spindle for high-speed machining, and through-spindle coolant to enhance tool life and chip removal. Consider the HAAS VR-11 machine we have for sale for its advanced features and versatility. For more details, please contact us.

Used 4-Axis lathe manufactured in 2022, with immediate availability. This HAAS ST-20Y includes a D210 hydraulic chuck, D65mm main spindle bore, and a hydraulic programmable tailstock for enhanced flexibility. Its 12 pcs turret head, BMT with X,Z,Y,C axis, and driven tools ensure precise operations. Additionally, a C-axis with hydraulic brake and chip conveyor enhance productivity. With only 3455 power-on hours, its practically new. The HAAS ST-20Y machine we have for sale represents an excellent addition to any production line. For more details, please contact us.