messer plasma used for sale

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction sizing without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft switch inverter, HiFocus 280i offers a fully electronic power source for the power range up to 280 A. The system provides the best cutting results in the field of laser-like cuts and offers a higher service life of the wear parts. Equipment: ? CNC control system Pierce-19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HiFocus 280i for cutting structural steel with recommended material thickness of 0.5 - 50 mm, punching up  ...

; now ready

The CNC-controlled plasma cutting machine RUR 2500P is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 161 i plasma system from Kjellberg with Contour Cut is suitable for use in the sheet thickness range of 0.5 - 40 (50) mm. As a soft switch inverter, HiFocus 161 i offers a fully electronic power source for the power range up to 160 A. The system is the multi-talent of plasma cutting technology for marking and cutting construction blades, alloyed steels, aluminium and all electrically conductive materials. (see Pdf ) Equipment: ? CNC control system Pierce 19 with touchscreen ? A motorized torch with automatic initial setting and burner ? Plasma cutting unit HiFocus 161 i for cutting structural steel with recommended material thickness of 0.5 - 38 mm, hole bars up  ...

Sato LS 2000 Working Range: 2000mm x 6500mm CNC 3010 Topaz Touch Screen 1 x Plasma Ultra Cut 200 ( Cutting up to 35mm ) Donaldson Suction System. To visit . Installation and commissioning on request; ready for immediate use

CNC plasma cutting system working range: 1500 x 3000mm OTC Superplasma 12000 Cutting up to 20mm quality cutting New control ProDNC from Micompan data transfer via USB; ready to use

Kjellberg Plasma Quick-change head Percut 370 M 1 , 160 amps data see PDF; ready to use

Esab CXD 3000 P Working range: 14000 x 2500 mm 2006 completely overhauled , new control system, new plasma system installed. 1x Plasma Plasmaarc 200 Cutting up to 40mm Burning table 2 x 6m inclusive Without burning tables , without filter system assembly and commissioning on request; ready for use

Plasma cutting system / power source Manufacturer: Kjellberg Type: PA-S47 CNC Year of construction: 1994 Cutting power: 40-130 A Quality section: 35 mm Cut: 45 mm Gas console: PV-S75W-1 without hose package .

Hifocus 160 i with automatic gas console PGV 2 with Percut 450 quick-release head with torch hose package 6m assembly and reversing on request.; ready for use

; ready for immediate use

Technische Daten: - Arbeitsbereich X - Achse 1300 mm - Arbeitsbereich Y - Achse 1300 mm - Schnittstärke 0,5 - 8 mm - Schnittgeschwindigkeit 0-8000 mm/min - Leistung 8,5 kW - Spannung 400 V/50 HZ - Plasma Leistung 60 A - Datenübertragung über Schnittstelle USB - Abmessungen 2000 x 1960 x 1470 mm - Gewicht 900 kg Grundmaschine: Der Maschinengrundrahmen sowie der Fahrständer sind statisch und dynamisch steife Schweißkonstruktionen. Auf dem Maschinenrahmen ist der Fahrständer in Y-Richtung angeordnet. Am Fahrständer befindet sich der Quersupport, der in X-und Z-Richtung verfahrbar ist. Hardware / Steuerung: Die DSP Steuerung ermöglicht ein flexibles eingreifen in den Arbeitsablauf. Mit dieser DSP Steuerung können Sie Computerunabhängig Ihre G-Daten Dateien von der Fräsmaschine verarbeiten lassen. Software: inklusive Artcam Express Software Die ideale Software zum Erstellen von Bea ...

Technische Daten: - Arbeitsbereich X - Achse 1300 mm - Arbeitsbereich Y - Achse 2500 mm - Schnittstärke 0,5 - 10 mm - Schnittgeschwindigkeit 0-8000 mm/min - Leistung 8,5 kW - Spannung 400 V/50 HZ - Plasma Leistung 100 A - Datenübertragung über Schnittstelle USB - Abmessungen 3200 x 1960 x 1470 mm - Gewicht 1000 kg Grundmaschine: Der Maschinengrundrahmen sowie der Fahrständer sind statisch und dynamisch steife Schweißkonstruktionen. Auf dem Maschinenrahmen ist der Fahrständer in Y-Richtung angeordnet. Am Fahrständer befindet sich der Quersupport, der in X-und Z-Richtung verfahrbar ist. Hardware / Steuerung: Die DSP Steuerung ermöglicht ein flexibles eingreifen in den Arbeitsablauf. Mit dieser DSP Steuerung können Sie Computerunabhängig Ihre G-Daten Dateien von der Fräsmaschine verarbeiten lassen. Software: inklusive Artcam Express Software Die ideale Software zum Erstellen von  ...

Technische Daten: - Arbeitsbereich X - Achse 1300 mm - Arbeitsbereich Y - Achse 2500 mm - Schnittstärke 0,5 - 8 mm - Schnittgeschwindigkeit 0-8000 mm/min - Leistung 8,5 kW - Spannung 400 V/50 HZ - Plasma Leistung 60 A - Datenübertragung über Schnittstelle USB - Abmessungen 3200 x 1960 x 1470 mm - Gewicht 1000 kg Grundmaschine: Der Maschinengrundrahmen sowie der Fahrständer sind statisch und dynamisch steife Schweißkonstruktionen. Auf dem Maschinenrahmen ist der Fahrständer in Y-Richtung angeordnet. Am Fahrständer befindet sich der Quersupport, der in X-und Z-Richtung verfahrbar ist. Hardware / Steuerung: Die DSP Steuerung ermöglicht ein flexibles eingreifen in den Arbeitsablauf. Mit dieser DSP Steuerung können Sie Computerunabhängig Ihre G-Daten Dateien von der Fräsmaschine verarbeiten lassen. Software: inklusive Artcam Express Software Die ideale Software zum Erstellen von Be ...

Pierce control automation RUR 2500 P Work area: 2.1 m x 6.1 m Control: Burny 10 LCD Fully welded Portal construction without bolted connections o LM Guide in the transverse axis o AC servo-motors (12 000 mm / min.) o Digital synchronization on the longitudinal axis o CNC control system BURNY 10 LCD Plus with touch screen o Membrane keyboard o 'Flying' bearing inserts o Automatic initial setting of the plasma torch o Voltage monitoring of plasma torch height o 1 burner parking outside the cutting area o Circuit breaker at the end of all axes 1 x plasma Kjellberg 160i with manual gas console Cut quality cutting up to 25 mm Optional autogen retrofittable Completely Factory reconditioned machine Installation and commissioning on request

CNC flatbed portal cutting machine with web control CNC 3000. plasma system Fabr. KJELLBERG HiFocus 160i and filter system Fabr. KEMPER. Working range: 2000mm x 4000mm portal bridge with double-sided, synchronised rack/pinion drive in longitudinal axis / play-free timing belt drive in transverse axis / guide track with cover and high-precision linear guide system on torsion stiffener aluminium profile / trolley with precision profile rollers / 3 pieces digital AC drive motors / switch gear control for the switch gear CNC control under Windows with 32bit processor, color screen 12.1 LCD TFT, interfaces V24 + USB, SATRONIK PLUS CAD/CAM programming software with all geometry functions (e.g. point, arc, circle, rectangle, long hole, etc.), functions (e.g. moving adjustment, stretching, chamfering, etc.), manipulations (e.g. turning, mirroring, etc.), SATOMATIC HV 150 PT arc height scan  ...

CNC Portal Plasma Cutting Machine Manufacturer: ESAB Eagle 2500 Year of construction: 2004 Control: Vision DNC Connection track width: 2,500 mm runway: 5 m Working area: 2 x 3 m Extraction table 1 plasma torch with power source Kjellberg HiFocus 160i automatic gas console (see PDF) cutting tools: up to 25 mm filter cutting system: Columbus Immediately available ; ready for immediate use

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...

Type Gemini 4000 Bj.11/2007 8000mm Laengslaufbahn 2 x Autogen burner 1 x Plasmasupport Preparation Working area 3500mmx6000mm without filter system, without burning table. commissioning on request ; ready for immediate use

Plasma and cutting machine Promotec Ector 30 / 170 Working range: 3000mm x 17000mm 1 x Plasma Ht 2000 Hypertherm cutting up to 25mm 1 x Autogen support up to 100mm machine to visit under power . Without table and filter assembly and commissioning on request; ready for use

; ready to use

Plasma cutting system with Hypertherm HPR 130 with automatic gas console cutting up to 20 mm Work area: 1500 x 3000 mm included filter system available under current mounting and commissioning on request

Sato Satronik C 1500, Y.O.M. 98Control 801Travel distances 2500mm x 1500mmSuction table Kemper 3000mm x 1500mm, Y.O.M. 2012Extraction Kemper 8000, Y.O.M. 2012, but with 0 operating hours, for outdoor installation, with portable control panel, plasma source Hypertherm Powermax 1650,laptop with laptop with Lantek programing softwareAssembly and commissioning on request; ready for immediate use

Fine beam plasma cutting system HD 3070 with manual gas console incl. Arcwriter Hose package plant suitable for 3 m x 8 m

CNC Plasma Auto Bevel machine KOIKE VERSAGRPH-6000 3DP (2014) Width 4500 mm x 43 M, thickness 6-40 mm; "Plasma""I""cutting: 6 to 40mm; ""V""cutting: 9to 30mm; Power supply 3-phase 440V; Fluid oxygen 7~9.9 kg/cm; Fuel gas 1~1.5kg/cm (LPG); Air 7~9.9 kg/cm"; Cutting speed: 0~6,000mm/min; Marking Soeed max. 18,000 mm/min; Rapid speed:24,000mm/min (2014) Cutting bed dim: 30M x 4.6M Rail Length: 30M; Span: 6M With Chiller, Power Supply, Panel box, Cable rail, compressed air dryer, dust collector and Transformer Rails and cutting bed Attached to rails and cutting bed of Lot 313 Make KOIKE Serial VG-A-0218 Model VG-6000DXI Year 2014

Esab UXD - P 2500 Control NCE 290 1 x Plasma: Kjellberg PA S 40 cut up to 30mm 1 x Autogen Support Working area: 2500mm x 3500mm Including suction machine has two-sided drive and is very well maintained. commissioning on request ; ready for immediate use

Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.

Plasma cutting system with Hypertherm HPR 130 with automatic gas console Cutting up to 20mm Working range: 1500mm x 3000mm inlusive filter system Immediately available under current assembly and commissioning on request

CNC plasma cutting system Work area: 1500 x 3000 mm OTC Super plasma 12000 Cut quality cutting up to 20 mm New control ProDNC from Micompan Data transfer via USB

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 020608 plasma nozzle -for: Hypertherm HT2000 -Number: 1 piece available -Total weight: 0.1kg

Plasma extraction and filter system Filter BLOC TFK PL Series special central suction and filter unit for plasma smoke when burning and cutting the FILTER BLOC TFK PL series and CQC certified manufacturer according to ISO 15012 and CE drawing FILTER BLOCK - TFK PLASMA 40/60/80 Motor power 5,5 / 7,5 / 11 KW air volume 4000/5500/6200 m3 / h 124/186/248 m2 filter surface dust container 4x/6x/8x 84 liters Automatic jet cleaning system with testing for welding fume category W3 24 Months Warranty The price refers to the TFK PL 40 for further information on request; ready to use

ECKERT Szafir II thick plate burner for sale sectional work table with extraction 3000 x 4500 cutting range 6-180 mm

Ajan 12000 mm x 3000 mm Plasma and Oxygen Cutting Machine Machine is in good working condition

Ajan PP 260 A Plasma Cutting Machine Machine is in good condition

Gemini type 4000 BJ. 11/2007 8000mm longitudinal career 2 x oxy-fuel burner 1 x plasma support preparation Workspace 3500mmx6000mm without filter system without firing tables. Commissioning on request

Alfhatech HPR260XD Plasma Cutting Machine Sheet Metal Size : 3000x120000 260 Amper Power Source : Hypertherm Machine got serviced 8 months ago

Microstep - EuroCut-P 3001.15 Working range: 1500mm x 3000mm plasma source Kjellberg HiFocus 160i with automatic gascosole cutting up to 25mm quality cutting suction Donaldson MD2-PLC + DFPRO 4 SPRK with an additional EX protection. Refurbished in 2016 All maintenance or repairs were carried out exclusively by the manufacturers (MicroStep and Donaldson). The prescribed maintenance intervals have always been adhered to. All maintenance and repairs are extensively documented. commissioning on request

Ajan 12000 mm x 3000 mm Plasma Cutting Machine All maintenance has been done by authorized service Cutting table : 12000 mm x 3000 mm 4 axis

Microstep - EuroCut-P 3001.15 Work area: 1500 x 3000 mm Plasma source of Kjellberg HiFocus 160i with automatic Gaskosole Cut quality cutting up to 25 mm Extraction Donaldson MD2-PLC + DFPRO 4 which with additional EX-protection. Refurbished in 2016 All servicing or repairs were solely by the manufacturer (Company MicroStep and Donaldson). The prescribed maintenance intervals were always met. All maintenance and repairs are extensively documented. Commissioning on request

Ajan PL-OC 30140 Plasma Cutting Machine HPR 260 Machine is in good working condition

Ajan 12000 mm x 3000 mm oxygen and plasma cutting machine like new condition 260 Amper Machine has been used approximately 1 month It is like new condition Pipe cutting tools can be connected to the machine

Ajan 6000 mm x 2000 mm Plasma and Oxygen Cutting Machine 130 Amper 6000 mm x 2000 mm Maintenance has been done Machine also has oxygen cutting feature Machine is in good working condition

Durma PL-C2060 Plasma Cutting Machine 6000 mm x 2000 mm Machine is in good working condition

Ajan 20006000 mm Plasma Cutting Machine Machine is like new condition, only 2 months used

Plasma OXY Cutting Machine Manufacturer Zinser Model 2325 CNC 2030 Year 2007

Esab Combirex DX 3000 Working range: 2500mm x 4000mm 1x Plasma Support CNC Portal Plasma Cutting Machine Manufacturer: ESAB Type: Combirex DX 3000 Built: 2015 Control: Vision T5 Track width: 3,000 mm frame: 6000mm Working range: 2500mm x 4000 m suction table 1 plasma torch with power source m3 202 torch PT 36 Cutting rods: Punching: 38 mm Cutting: 45 mm laser pointer filter system ex protected cutting software: Columbus Very low operating hours commissioning on request

Ermak EPL 2080 Plasma Cutting Machine 2000X8000 mm Machine is in good condition

Machine has been fully revised in January 2023 Machine is like new condition

Ajan 2000 x 6000 mm Plasma and oxygen cutting machine Machine is in good working condition

Ajan PP 260A 2000 mm x 6000 mm pla 260 Amper Pipe cutting preparation Machine is in good working condition