We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,383 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
large working width: 2040 mm for sheets up to: 4.5 mm Opening width upper cheek: 320 mm Adjustable bending cheek: 120 mm Upper cheek drive: 2.2 kW Under-wall drive: 2.2 kW electr. Connection: 5 kW Weight: 3700 kg Space requirement: 3250 x 1000 x 1900 mm
used
Working width: 1400 mm Roller width: 1600 mm pressure: 40 t Pressure line: 250 N / mm Number of rollers: 2 Stück Upper roll: 320 dia Roller covering: Stahl, verchromt Heating - upper roll: Thermoöl Swimming roll - dia: 355 mm Roller covering: Flexroll-Manchon Clouth speed: 30 m/min Weight: 10 to dimensions of the machine ca.: 3,0 x 4,0 x 2,5 m • Inlet side with bearing cap for small skeins, • At outlet with Sochor arm and hydr. center winder, with thermic oil heating, Make: TOOL-TEMP, Switzerland, Type TT-380. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
; Gross weight [kg]: 1825; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 320
used
; Gross weight [kg]: 2025; Engine: Perkins 1106A-70TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 225
used
; Gross weight [kg]: 2025; Engine: Perkins 1106A-70TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 225
used
M. No .: 0024 Output: max. / min mechanical: 9000 copies / h // 2000 copies / h Formats: trimmed max. / min .: 30.5x34.9 cm // 8.9x14 cm Untrimmed max. / min: 31.1 x 35.5 cm // 9.2x14.6 Product thickness max. 1.0 cm pressed Consists: 6 stations 2 normal Hohner stitching heads and 4 ring eyelets stitching heads Equipment / Additional information: Machine books available Power supply: 50/60 Hz // 3x380 V (420) // 3x220V (200) Cover feeder is defective
used
; Gross weight [kg]: 5230; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 550
used
; Gross weight [kg]: 1496; Engine: Perkins 1104C-44TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 63A - 32A; Water Tank Volume [l]: 200
used
; Gross weight [kg]: 1450; Engine: Perkins 1104A-44TG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 180
used
length: 5.000 mm width: 2.000 mm Thickness: 210 mm material: Stahlguss total power requirement: kW Weight: 6000 kg dimensions of the machine ca.: m Measuring plate / alignment plate as good as new, with integrated alignment points, 3 x longitudinal T-slots, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Thickness: 16 x 16 mm number: 4 Stähle weight: 3 kg dimensions: 300m x 200 x 50 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
; Gross weight [kg]: 1135; Engine: Perkins 1104A-44TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : 125A - 63A - 32A - 16A; Water Tank Volume [l]: 87
used
; Gross weight [kg]: 1200; Engine: Perkins 1103A-33TG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : 125A - 63A - 32A - 16A; Water Tank Volume [l]: 140
new
tube diameter: 33,7 x 3,4 GAS mm tube diameter: 35,0 x 2,5 STAHL mm bending radius min.: R10 - R 190 mm tube diameter: 35,0 x 1,5 EDELST mm bending angle max.: 0 - 180 ° tool taper: 6-kant 40 mm voltage: 230 V total power requirement: 0,9 kW weight of the machine ca.: 23,0 kg Description : - MediBender 070 digital - with maximum bending power steel tube 35 x 2.5 mm - Excellent bending quality with very tight bending radii (from 2 x tube Ø) & Bending angles between 0 ° to 180 ° - Easy handling - High accuracy and reliability - Quick tool change (within a few seconds) - Easy to transport - A huge selection of inexpensive standard tools (metric, gas inch, inch) Bending segments available for an extra charge STAHL bending segment R-82 G-1 ... 308 euros SLIDING SHOE brass 1 gas = 33.7mm ... 93 euros The data for this ad was created with ModulMWS - the software solution of LogoTech o ...
new
bore capacity in steel (diameter): 35,0 mm bore capacity in cast iron: 40,0 mm throat: 320 mm threading: M 24 in Stahl morse taper: 4 MK bore stroke: 160 mm turning speeds: 65 - 3250 U/min table:: 500 x 420 mm throat: 320 mm weight: 375 kg range L-W-H: 600 x 870 x 2.170 mm Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve ...
new
welding power: MIG - MAG 30-300 A (stufenlos) Type of gas: Mischgas + Co2 Wire thickness: 0,6 - 1,2 Stahl mm Wire thickness: 1,0 - 1,2 Alu mm Wire thickness: 0,8 - 1,2 CuSi mm welding power: 100 % ED - 200 A welding power: 60 % ED - 250 A welding power: ED bei max. Strom - 45 % voltage: 3 ~ 400 V range L-W-H: 880 x 400 x 755 mm weight: 51 kg LORCH authorized trader - other models on request Description: - A MIG-MAG system that can also use electrodes. Simply remove the burner, Connect the electrode holder to the additional electrode socket and Select electrode welding in the control panel. Furnishing: - Compact device, gas-cooled with synergy operation - stepless welding current setting - Volt & ampere indicator - 7-stage arc dynamic control - Synergy control - Welding program selection in the feed area - full upgradeability The data for this ad was created with ModulMWS - the softwar ...
used
; Gross weight [kg]: 5750; Engine: Volvo TWD1645GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger
used
; Gross weight [kg]: 3350; Engine: Volvo TAD1341GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515
used
; Gross weight [kg]: 3700; Engine: Volvo TAD1343GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 576
new
welding power: 30 - 290 A (stufenlos) welding power: ED 60% 175 A Wire thickness: 0,6 - 1,2 Stahl mm Wire thickness: 1,0 - 1,2 ALU mm voltage: 400 V weight: 67 kg LORCH authorized trader - other models on request Description: Automatic setting With the help of the automatic adjustment of the wire feed speed The Lorch M 304 supports you with the selected voltage level Finding the perfect working point. Quality wire feeder The Lorch M 304 comes with a 4-roller wire feed as standard Robust housing due to its compact and robust You can easily place your Lorch M 304 under the housing with sturdy wheels Stow away the workbench or use the top of the machine as a storage area. Double gas bottle lock For optimal safety, the Lorch M series has a double Gas bottle lock. So you can move your power source safely. Furnishing: - Integrated 4-roll wire feed - ML2500 burner, 4m - Workpiece lead 25 mm² ...
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Bohrleistung in Stahl (-Ø: 35 mm throat: 1000 mm workpiece height max.: 200 - 1400 mm height adjustment: 745 mm base plate surface area: 1200 x 930 mm Bohrspindel-Ø/ Aufnahme: 90 mm / MK 4 bore spindle stroke: 350 mm turning speed range: 60 - 1850 U/min feed range: 0,09 - 1 mm/U power capacity: 3,7 kW weight of the machine ca.: 3,7 t dimensions of the machine ca.: 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
; Gross weight [kg]: 3600; Engine: Doosan DP126LB; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 625
used
; Gross weight [kg]: 4200; Engine: Doosan DP158LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 800
used
; Gross weight [kg]: 4800; Engine: Doosan DP180LA; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1000
used
Double sided sander Stähle Saturn Duo Comfort Technical data Electrical power:11-14 kW (with brushing unit) - sanding motors 2x4,2x5,5 or 2x6,6 kW Compressed air: 8 bar, 400 to 500 l/min Sanding belt speed: 25m/sec Dimensions: Length: 1740 mm Width: 1070 mm or 1270 mm (with cross-cut) Working height: 825mm Workpiece dimensions: Thickness: 10mm min - 150mm max Width: 10mm min - 180-300 mm max Length: 290 mm min - unlimited Exhaust flanges: 2x80mm dia., 2x120 mm dia. (required air velocity 30m/sec at the flanges)
used
; Gross weight [kg]: 2100; Engine: Doosan P086TI; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 285
new
Anchor point/transport bar AS NEW: Eyebolt type: MEGADSS_U3_1/2 Maximum load: 95,000 Lbs With certificate
used
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Quantity delivered: 100 l/min Voltage 50 Hz 3x: 380 Volt Engine power: 5 kW Machine´s weight about: 2800 kg Dimensions: Length: 3300 mm Width: 2000 mm Height: 2350 mm Various accessories: Crane: Carl Stahl Replacement filter: 4 pce
used
; Gross weight [kg]: 11327; Engine: Perkins 4008TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1460
used
Lifting capacity: 25000 kg Hoist height: 0 mm Span length: 13000 mm Type: Overheadcrane MACH-id 3524 MAKE Stahl Germany TYPE YEAR SPECIFICATIONS Span13.000 mm SWL / Kg 25.000 kg Stahl used cranesystem, overhead crane.More cranes on:
used
; Gross weight [kg]: 6185; Engine: Perkins 2806D-E18TAG1A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1050
used
; Gross weight [kg]: 1648; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185
used
Workpiece weight: 10000 kg Table diameter: 1400 mm Make Stahler 10 T Type SD 10000 Year 70 er Welding positionar manipulator Workpiece weight by welding positioner (kg) Table 1400 x 1400 Table diameter (mm) Load = 10.000 Kg Workpiece weight by selfaligning rotater (kg)Tilt 0 - 135 Gr Workpiece diameter (mm)Remote control Number of rolls New Elctr. cabinet
used
; Gross weight [kg]: 2430; Engine: Cummins 6CTAA8.3-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 63A - 32A; Water Tank Volume [l]: 285
used
; Gross weight [kg]: 1160; Engine: Cummins 4BTA3.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 87
used
; Gross weight [kg]: 1214; Engine: Cummins 4BTA3.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 87
used
Pallet feeder – separating head MCT2000 touch control monitor 1st folding unit - 4 motorized buckles and rollers BCUH KTLL unit with 3 motorized knives + side buckle (after the 1st knife) Noise hood Compressor SBP 46+VE delivery
used
; Gross weight [kg]: 1520; Engine: Cummins 6BT5.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 120
used
; Gross weight [kg]: 1450; Engine: Cummins 4BTA3.9-G11; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 120
used
Solia M380 with lots of accessories according to the pictures. Disc disc, cube disc, grater and much more.m. Private sale, therefore no VAT. Refundable. No gaantie, but hardly walked and fully functional.
used
Capacity: 2800 Watt volume: 100 L filter: HEPA : 230 mbar material: INOX Edelstahl Behälter : 5000 mm hose diam.: 32 mm : 5000 mm noise: 82 dB dimensions: LxBxH 50 x 50 x 135 cm weight: 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Torque wrench make STAHWILLE type manoscope 721 NF / 80Fabr -No: 202318024Scale range: 160 - 800 NmScale range: 120 - 600 ft. LbScale division: 20 NmScale: 20 ft. LbSocket Square: 3/4 B 46.5 mmB 76 mmTotal length: 1040 mmWith- triggering- comfortable setting- double stop signal- Double scale Nm / ft. lb- Left suit by removable square- Protection of all sensitive parts by the robust steel tube in aluminum U profilevery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Double-ended electric chain hoist make STAHL type R 12Fabr. -No: 3418474 year of construction 1969Last strands: 2Payload: 1250 kgMain lifting speed: 8 m / minPower 380 V: 1.22 kWWeight approx. 45 kgWith- chain memory- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
; Gross weight [kg]: 1034; Engine: Cummins 4B3.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
used
; Gross weight [kg]: 1082; Engine: 4BT3.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
used
Electric chain hoist make STAHL type R 6/600Masch. -No: 3544260 Year 1971Load capacity: 600 kgLifting height: 3.0 mPower: 0.44 kWWith- fine lift- Roller chassis- chain memoryused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
; Gross weight [kg]: 1072; Engine: Cummins 4B3.9-G12; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
used
; Gross weight [kg]: 4590; Engine: DC13 072A 02-12; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 990
used
Wall swivel crane make STAHL type PW 125 kgMachine -No: 68543/12011 built in 1994Capacity: 125 kgProjection: 4000 mmProfile size: 125 x 60 mmWith- wall console- Roller chassis- without hoistsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools