308 results Manually Operated Bandsaws

similar results found in category saws

The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Category: saws
Updating date: 19.02.2019 item-No.: 91028501
approved
dealer
New in: new
Seller: country1-fi KKT oy
Price: 5.900 €

A 3-phase Contactor suitable for various applications such as Isolation, By-pass and Distribution application up to max 1000 V. Operated with wide control voltage range 100-250 V, AC/DC Dimensions Product Net Width:438.0 mm Product Net Depth:244.0 mm Product Net Height:392.0 mm Product Net Weight:33.000 kg Technical Number of Main Contacts NO:3 Number of Main Contacts NC:0 Number of Auxiliary Contacts NO:2 Number of Auxiliary Contacts NC:2 Rated Operational Voltage: Main Circuit 1000 V Rated Frequency (f): Main Circuit 50/60 Hz Conventional Free-air Thermal Current (Ith): acc. to IEC 60947-4-1, Open Contactors q = 40 °C 2050 A

Category: saws
Updating date: 27.02.2020 item-No.: 145087476
approved
dealer
New in: used
Seller: country1-nl Mach4metal

Sheet thickness: 10,00 mmBending length: 2000 mmNumber of rolls: 4   MACH-id     5331 MAKE          AKYAPAK TYPE             AHS / 4 YOP                2008 SPECIFICATIONS Control       Conventionel Hydraulic / Mechanical        Hydraulic 3 or 4 roll        4 roll Maximum sheet thickness         10 mm Bending length        2100 mm Max. Rolling capacity Ø 2.500         10 mm Max. Prebending capacity Ø 2.500     8 mm Top Roll Ø       210 mm Bottom Roll Ø      190 mm Side Rolls Ø         170 mm Working speed M/Min.4 M/min. DIMENSIONS Length       3200 ...

Category: saws
Updating date: 24.02.2020 item-No.: 124338925
approved
dealer
New in: 2005
used
Seller: country1-hu Telkes Gép GmbH
Price: 7.900 €

Gantry robots for automatic handling of memory cards; equipped with contact surfaces for 48 memory cards. ? Automatic transport system for memory card slots; adaptable to a wide range of tray types. ? The contact points are with a built in copy unit; separate controller for each contact point allows the copying commands a very high-performance parallel processing. ? Compatible with the following memory media by exchanging the contact surfaces: SD card / MMC, RS-MMC, microSD, other storage media like miniSD, memory stick PRO Duo or media Mory stick micro M2 on request. ? The copy station is operated, a touch - screen that is mounted on a swivel arm is. A belt vacuum by an ejector - system is intended based ? the handling system on Bosch Rexroth automation module that uses drive system linear motors and tooth. ? High speed - image copies - eg48 cards high ...

Category: saws
Updating date: 26.02.2020 item-No.: 145098063
approved
dealer
New in: used
Seller: country1-de SALING Werkzeugmaschinen GmbH
Location: Hamburg Barsbüttel

throat :250 mm height of stroke:400 mmpressure:6 t

Category: saws
Updating date: 16.09.2017 item-No.: 65282037
approved
dealer
New in: used
Category: saws
Updating date: 16.09.2017 item-No.: 65282039
approved
dealer
New in: used
Category: saws
Updating date: 09.07.2019 item-No.: 125220676
approved
dealer
New in: 1984
used
Seller: country1-de Venker Werkzeugmaschinen GmbH
Location: Anemonenweg 8, 33335 Gütersloh, Deutsch
Price: 15.300 €

Hydraulic delivery of the right and left bending roller with digital display Hydraulic delivery of the right and left leadership Right - and left-hand rotation machine can be operated vertically and horizontally Lots of accessories Shaft diameter: 80 mm The Central roller diameter: 250 mm Minimum bending diameter: 300 mm Weight: 1600 kg

Category: saws
Updating date: 25.02.2020 item-No.: 145237728
approved
dealer
New in: used
Seller: country1-nl Leegsma Used Industrial Machinery
Location: 7707 Balkbrug
Price: 2.750 €

AVC Bundelpakker BP 500 AVC bundle packer BP 500 Pneumatically operated bundle packer. Manual input. Maximum foil width 500 mm. Equipped with an impulse sealing system. Welding cycle 2.5 sec. Seal and cooling time switches independently adjustable. 230V / 1 Phase + 0 + Earth. External air supply 6 Bar AVC Bundle Packer BP 500 Pneumatisch betriebener Bündelpacker. Manuelle Eingabe. Maximale Filmbreite 500 mm. Ausgestattet mit einem Impulsdichtungssystem. Schweißzyklus 2,5 Sek. Dichtungs- und Abkühlzeitschalter unabhängig voneinander einstellbar. 230V / 1 Phase + 0 + Erde. druckluftversorgung 6 Bar

Category: saws
Updating date: 22.01.2020 item-No.: 144750608
approved
dealer
New in: used
Seller: country1-ru Normar Trading
Location: 18303 Murmansk, Podgornaya, 92-105

Machine for decapitation and evisceration of cod Condition: Restored The machine can be operated either only for evisceration, or in a combined mode, for beheading and evisceration. Cod with a total length of 50-90 cm (1.00 - 5.00 kg) are processed on the machine without reconfiguration to certain sizes. The disk knife cuts the insides of the kaltyk. The cutting knife-thrower dissects the abdominal cavity with a round cut and removes the insides. After beheading, the central captures free the fish at the exit of the car. The humerus remains on the carcass. Performance: 28 fish per minute Power consumption: 3 kW Water consumption: 25 litres per minute Dimensions (DJW): 1500 q 1380 x 1950 mm Mass (net/gross): 965 q 1300 kg The Baader 162 is combined with the Baader 185 and 200.

Category: saws
Updating date: 24.10.2019 item-No.: 141526725
approved
dealer
New in: used
Seller: country1-ru Normar Trading
Location: 18303 Murmansk, Podgornaya, 92-105

Baader 415 Round Cut Condition: Restored The machine is designed to decapitate round-cut cod with a total length of 50-110 cm, with the humerus remaining on the carcass. The machine is operated when cutting the fish into clipp. Performance: 26-39 fish per minute. Power consumption: 1.5 kW Water consumption: 3 litres per minute.

Category: saws
Updating date: 04.12.2017 item-No.: 121976711
approved
dealer
New in: 2016
used
Seller: country1-uk Euro Rubber Lines

QTY 1: New Bainite make 95 litre intermeshing type mixer Model: BMIM95 Intermeshing mixer with hydraulic hopper Net chamber volume: 95 litre Rotor speed: 6 – 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement), Motor power: Siemens 420kW, 1000rpm AC squirrel cage motor with Siemens G150 VFD, Discharge door: Hydraulic drop door type with linear actuator and toggle latch mechanism, Feed Hopper Assembly: Hydraulically operated, Floating weight: single ‘V’ bottom type, Gearbox: Elecon Full unidrive type with S.F. 2.25. Bedplate: Fabricated steel, Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Electrical Controls:  Siemens G150 variable frequency drive controls. Operator control panel with Siemens PLC and HMI.

Category: saws
Updating date: 23.06.2016 item-No.: 13601707
approved
dealer
New in: new
Seller: country1-uk Euro Rubber Lines

NEW Bainite model BMIM95 95 litre intermeshing type mixer Customs Tariff CN Code: 8477.8093 Manufacturer: Bainite Machines Pvt Ltd Net chamber volume: 95 litre Rotor speed: 6 - 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement) Motor power: 420kW, 1000rpm AC motor, 3ph, 50Hz, 380/400V Discharge door: Hydraulic drop door with linear actuator and toggle latch. Two (2) J Type thermocouples mounted in door top as standard One (1) Single acting pneumatically operated oil injector Feed Hopper Assembly: Hydraulically operated Floating weight: single ?V? bottom type Gearbox: Full unidrive type with S.F. 2.25 Bedplate: Fabricated steel Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Three (3) Zone closed loop temperature control (TCU) Electrical Controls: Schneider make variable frequency drive (VFD) controls wit ...

Category: saws
Updating date: 03.10.2019 item-No.: 129791185
approved
dealer
New in: new
Seller: country1-pl Bartontech
Location: 89412 Sosno, Wodna 10
Price: 12.000 €

New machine! EPS Compactor C50 Press polystyrene EPS-C50 compacts EPS waste at a ratio of 40: 1. Ironing polystyrene by using offered compactors EPS reduces the cost and the space occupied by the EPS waste. EPS presses are very easy to use and safe, can be operated by one person. In addition, the compression of waste polystyrene foam and its re-use can help us to care about the environment. Technical specifications: • Total power consumption: 6,2 kW • Compactor size: 2000 x 600 x 1700mm • Weight: 690kg • The size of the inlet: 800 x 450 x 1800mm • EPS-block size: 200 x 200mm • Productivity : 50kg per hour • Compression of EPS: 40:1 • Thickness of compressed EPS: 200-400kg/m3 • CE standard • Product of Poland In case of questions please contact us!

Category: saws
Updating date: 03.10.2019 item-No.: 126063251
approved
dealer
New in: new
Seller: country1-pl Bartontech
Location: Bydgoszcz
Price: 23.000 €

EPS Compactor C200 by Bartontech Poland New machine, produced by us! Price: 23 000 euro’s (netto price) Press polystyrene EPS-C200 compacts EPS waste at a ratio of 50: 1. Ironing polystyrene by using offered compactors EPS reduces the cost and the space occupied by the EPS waste. EPS presses are very easy to use and safe, can be operated by one person. In addition, the compression of waste polystyrene foam and its re-use can help us to care about the environment. Technical details: - Power consumption: 6.2 kW - Compactor size: 5425×750×2100 mm - Weight: 2,000 kg - Size of the inlet: 1000×645×1710 mm - EPS Block size: 380×380 mm - Productivity: 200 kg per hour. - Compression of EPS: 50:1 - Thickness of compressed EPS: 200 - 400 kg/m3 - CE standard - Product of Poland If you have any another questions, don’t hesitate to contact us! Telephone: +48 783 891 132 or e-m ...

Category: saws
Updating date: 10.10.2019 item-No.: 141957024
approved
dealer
New in: 1973
used
Seller: country1-de MET-TECH GMBH
Location: 61381 FRIEDRICHSDORF, AM RINGELSBERG 8

Qty. 1 Second-hand gas turbine power plant (GTPP) The GTPP consists of four fossil-fuelled (fuel: light heating oil) gas turbines. Mfc.: Brown Boveri (later ABB and now Alstom) Type: BBC GT13B They are operated without a waste heat boiler. First commissioning was in: 1973 Stopped: 2017 Total electrical power: 252 MW Performance consists of 4 single turbines together with each 63 MW of electrical power. The plant was as quick start system running, which within about 5 min. has run up to full load. The gas turbine plant was used to cover peak loads. Offered here is a gas turbine plant as a complete system. The system has an efficiency of ? = 27% and is operated with light fuel oil. The efficiency can be increased (water tank has to be added – GOD system).

Category: saws
Updating date: 20.01.2020 item-No.: 144714711
approved
dealer
New in: 1986
used
Seller: country1-dk DenTool LTD
Location: 0 Naestved

Bearing number: 3462 Band saw Manufacturer: Behringer , Type: HBP 340 Machinen NR.: 1186227, built: 1986 Specifications: Gr. sawing capacity dia. 340 mm Length: 1800mm, Height: 1700mm, Width: 1000mm, Weight:

Category: saws
Updating date: 15.01.2020 item-No.: 125663355
approved
dealer
New in: new
Seller: country1-de Hagen Busch Maschinenhandel
Location: Mühltal
Price: 3.900 €

Special features: -The machine is suitable for the cutting of steel, stainless steel and aluminium profiles. Quick vise with quick clamping Carbide blade Guide -Built-in tape tension control Electrical automatic cooling -Patented, ball bearing turntable MITRE 60° li + re. 45° Data: Manufacturer: Berg & Schmid Type: GB 242 DG Autocut stepless Electrical data: power External dimensions B: 1250mm Hmax: 1700mm L1500mm Speed: Stepless 25-90 Weight: 290 kg Reduction: Automatically via hydraulic cylinders Cutting area: 90° round 250mm, square 210mm, rectangular 290x210mm 45° li. Round 220mm, square 200mm, square 210x200mm 60° li around 140mm, square 130mm, rectangular 140x130mm 45° re around 170mm, square 170mm, rectangular 170x170mm

Category: saws
Updating date: 02.10.2019 item-No.: 131839099
approved
dealer
New in: 2006
used
Seller: country1-de Mieth Maschinenhandel
Location: 63322 Rödermark, Odenwaldstr. 63

Technical data: -Band saw blade dimensions 3930 x 27 x 1.1 mm -Cutting speeds stepless 18-100 m / min -Hydr. Cutting pressure regulation -Hydr.-lifting + lowering the saw frame -Left + right miter-adjustable -Cutting area -at 90 ° around 350 mm -square flat 330 x 330 mm -flat 450 x 320 mm -round 340 mm at 45 ° -flat 320 x 320 mm -at 60 ° left around 210 mm -Max opening width of the Hydr. -Clamping stick 470 mm -Drive 400 V / 2,2 kW -Space requirement approx. B H 2000 x 1600 X 2100 mm -Weight approx. 950 kg -separate control panel

Category: saws
Updating date: 27.02.2020 item-No.: 134087521
approved
dealer
New in: used
Seller: country1-it GERMANPLAST SRL
Location: 13875 PONDERANO, VIA ANTONIO GRAMSCI 48

HORIZONTAL BALER Automatic binding Manufacturer: BERNARDI PRESSE Machine completely refurbished PLC operated Double guillottine for better compacting Dimensions: 2.100 x 3.500 x 9.200 mm. Loading channel size: 1550×1040 mm. Bale size: 800x1100x2300 Pressing chamber 1,4 cubic meter Shot 60 Ton N. 4 vertical bindings Main motor 30 Kw Installed power 33 kw Output 4 to 8 Tons/h 900 lt oil tank PLC for complete managing Double V knife for material cutting Total weight 14.500 kg. Bale outletting chute Reel holding units New electrical cabinet Separately available: conveyor belt 12000×1450 mm. 2,2 motor Side walls 700 mm.

Category: saws
Updating date: 15.01.2020 item-No.: 74413743
approved
dealer
New in: 2016
new
Seller: country1-de Hagen Busch Maschinenhandel
Location: Lautertal
Price: VB 900 €

Technical specifications Cutting capacity 90 ° round 180 mm 90 ° flat section 180 x 210 mm Cutting area around 45° 90 mm Section flat 45° 140 x 80 mm Working height 550 mm Band saw blade dimensions 2360 x 20 x 0,9 mm Cutting speeds 21 / 34 / 46 / 56 m / min Coolant reservoir 9 litres Coolant pump 25 W S1 motor power output 100% 0,75 kW Motor power S6 40% 1,1 kW Voltage 400 V Machine dimensions (L x D x H) 1250 x 520 x 1000 mm Weight approx. 130 kg Features For the cutting of profiles, tubes, solid materials,... Quick clamping Vice for bevel cuts up to 45 ° adjustable Double ball bearing blade Guide for optimal belt Print run of the saw bar by means of adjustable valve Automatic band saw cut end Placed in the machine body including coolant system, space-saving Quiet and low-vibration operation for optimu ...

Category: saws
Updating date: 15.01.2020 item-No.: 74413747
approved
dealer
New in: 2016
used
Seller: country1-de Hagen Busch Maschinenhandel
Location: Lautertal
Price: 395 €

Technical specifications Cutting capacity 90 ° round 100 mm 90 ° flat section 100 x 150 mm Cutting area around 45° 65 mm Section flat 45° 60 x 100 mm Band saw blade dimensions 1470 x 13 x 0,65 mm Cutting speed 45 m / min S1 motor power output 100% 0.37 kW Motor power S6 40% 0.55 kW Voltage 230 V Machine dimensions (L x D x H) 700 x 320 x 420 mm Weight approx. 26 kg Features Optimal price-performance ratio by versatile seen Including work piece stop for efficient working Adjustable saw iron for bevel cutting up to 45 ° Ideal for the construction site through low dead weight Fitted as standard with an integrated chip collector Optimum cutting results by ball bearing blade Guide Included quick clamping Vice Scope of delivery: Band saw blade Workpiece stop Quick clamping Vice Ergonomic handle Chip col ...

Category: saws
Updating date: 16.09.2017 item-No.: 65283080
approved
dealer
New in: used
Category: saws
Updating date: 27.02.2020 item-No.: 145087530
approved
dealer
New in: used
Seller: country1-nl Mach4metal

Sheet thickness: 3,00 mmBending length: 1500 mmNumber of rolls: 3   MACH-id    5171 MAKE        Birlik TYPE         MSM YOP          2006 SPECIFICATIONS Control       Conventionel Hydraulic / Mechanical      Mechanical 3 or 4 roll       3 roll Maximum sheet thickness      3 mm Bending length       1500 mm Max. Rolling capacity Ø 2.500       3 mm Max. Prebending capacity Ø 2.500         2.5 mm Top Roll Ø     110 mm Bottom Roll Ø      110 mm Side Rolls Ø     110 mm DIMENSIONS Length        2400 mm Width       980 mm Height       1120 mm .mach4metal.com

Category: saws
Updating date: 27.02.2020 item-No.: 145087558
approved
dealer
New in: used
Seller: country1-nl Mach4metal

Sheet thickness: 100,00 mmBending length: 600 mmNumber of rolls: 3   MACH-id    5092 MAKE         Boldrini TYPE           PIR 600 x 100 YOP             1980 SPECIFICATIONS Hydraulic / Mechanical        Hydraulic 3 or 4 roll        3 roll Bending length         600 mm Max. Rolling capacity Ø 2.500        100 mm Max. Prebending capacity Ø 2.500        70 mm Top Roll Ø       500 mm Side Rolls Ø     350 mm Working speed M/Min.    2.5 + 4 M/min .DIMENSIONS Length         3500 mm Width          1700 mm Height          2500 mm .mach4metal.com

Category: saws
Updating date: 27.02.2020 item-No.: 145087945
approved
dealer
New in: used
Seller: country1-nl Mach4metal

Sheet thickness: 100,00 mmBending length: 600 mmNumber of rolls: 3   SPECIFICATIONS Controll Conventionel Hydraulic / Mechanical  Hydraulic  3 or 4 roll  3 roll Maximum sheet thickness  100 mm Bending length  600 mm Max. Rolling capacity Ø 2.500   100 mm Max. Prebending capacity Ø 2.500  80 mm Top Roll Ø 500 mm Side Rolls Ø 350 mm .mach4metal.com 

Category: saws
Updating date: 16.09.2017 item-No.: 65281113
approved
dealer
New in: used
Category: saws
Updating date: 16.09.2017 item-No.: 65282969
approved
dealer
New in: used
Category: saws
Updating date: 16.09.2017 item-No.: 65282971
approved
dealer
New in: used
Category: saws
Updating date: 10.02.2020 item-No.: 144954259
New in: 2014
used
Seller: country1-fi JADE Trading OY
Location: 00980 Helsinki

Hot fill Filler-Capper Borelli Compact for 70 ml and 250 ml PET 3000 bph This automatic filling and capping monoblock was built by Italian Borelli company in year 2014 and operated only less than 10 000 working hours. Manufacturers type in Compact C12PK-AO and it is designed for hot filling of fruit and vegetable juices without CO2 in 70 ml and 250 ml PET bottles with neck sizes 28 and 38 mm. The filler is gravity type with 12 EVO 2 filling valves for hot filling. The capper is Arol Eagle PK with one screw capping head. The machine is fully automatic and in very good condition. The machine was dismantled in April 2019 and now in warm warehouse and ready for immediate shipment. Manufacturer Borelli Group, Italy Manufacturer's type Compact RMC12PK-AO Capper Arol Eagle PK Bottles used PET 70 ...

Category: saws
Updating date: 28.10.2019 item-No.: 135727213
approved
dealer
New in: used
Seller: country1-uk Andrew Isaacs Machinery International Ltd

Bridge 60” (1500mm) x 22” (550mm) Bridge Two Roll Mill Right angle drive Slip ring AC motor 100HP Motor overhauled Radicon Gearbox Hand operated nips Rotary Joints for steam heating / water cooling Vibro pads Motorised Grease Pumps Brush 100HP Motor 985 rpm 380 volts Shunt rewound All mounted on a one piece bedplate Complete with panel

Category: saws
Updating date: 26.09.2017 item-No.: 16174564
approved
dealer
New in: used
Seller: country1-uk Andrew Isaacs Machinery International Ltd

60? x 22? Two Roll Mill Right angle drive Hand operated nip Tray fitted beneath Mill rolls Complete with Control Panel

Category: saws
Updating date: 20.09.2019 item-No.: 122700205
approved
dealer
New in: used
Seller: country1-de Rau GmbH

Lifting installation with 2 lifting tables (staircase layout), each table with 1.500 kg elevating capacity, lifting height: 1,2 m each, incl. base frame for upper table (1,5 m high), hydraulic power pack and switchgear cabinet. Tables can be operated separately, too.

Category: saws
Updating date: 03.04.2018 item-No.: 101711750
approved
dealer
New in: used
Seller: country1-nl HHHTRADING

good operated machine

Category: saws
Updating date: 15.05.2019 item-No.: 135653043
New in: 1993
used
Seller: country1-uk West Pharmaservices Ltd
Location: BH21 West Moors, Collingwood Road

CAM SM80 Casepacker DESCRIPTION: Packaging machine for the final packing in boxes before shipment that guarantees reliability, versatility, high production characteristics even with non-top quality materials. The modular casepacker SM80 is one of the most reliable end-of-line machines. The machine has been developed to accommodate complicated applications, for ease of access, and to improve CAM standards of strength and reliability. Consisting of three separated modules: product feeding and collation, carton erection and carton closure, this machine guarantees a total control and easy cleaning. The collation and the volume of cartons have been made in a positive manner and operated through the mechanical movement of two arms with suction grippers. The manufactured products are accumulated, put in layers and inserted into the erected carton. The system of carton er ...

Category: saws
Updating date: 26.02.2020 item-No.: 145097736
approved
dealer
New in: 1965
used
Seller: country1-de Pagus Maschinenhandel
Location: Pagus NL. Jena Deutschland

pressure:20 tStroke:230 mmtable surface area:Ø600 mmdistance table - lower edge of ram:770 mmweight:595 kg

Category: saws
Updating date: 10.05.2018 item-No.: 123539693
approved
dealer
New in: 2008
used
Seller: country1-de 3p Vertriebsgesellschaft mbH
Location: D - Brandenburg

Renz Super 700 Heavy Duty Punching MachineThe Renz Super 700 Heavy Duty Punching Machine; designed to punch paper, cardboard and plastics. The machine is operated by electric foot pedal and can be used while sitting or standing.Heavy duty machine, with new drive system, rated for continuous punching and perforating.. Punching width up to 700mm (27.5´´) Easily operated by a foot switch Horizontal paper insertion guarantees punching accuracy on large formats. In addition, this design allows grooving or tear-off perforation at every position of the sheet. The open ended construction makes punching of double-length formats possible. The extremely high punching capacity, another big advantage of the RENZ Super 700 is that the punching dies of most competitive manufacturers can be used by changing the mounting adapter. Changing of dies is quick an easy. Split dies can be used in these machi ...

Category: saws
Updating date: 17.02.2020 item-No.: 125210792
approved
dealer
New in: 1998
used
Seller: country1-de Troostwijk Auctions
Location: Brunssum
Price: used machinery auction RESALE 7.500 €

CNC tenoner; consisting of : trimming machine, 3x multiple cutter back, cutter top and bottom, vv Elcon EC 8000 CNC control, maximum working length approximately 5000 mm, automatic longitudinal stop, moving table vv. various pneumatic material clamps, roller conveyor, incl. various milling and 2 additional blades diam. 400 mm (4 mm thickness) on the machine and various fittings on the plate, incl. Stock various blades, foot-operated, electrical control cabinet, 400 volts (collect on agreement Troostwijk)

Category: saws
Updating date: 13.10.2019 item-No.: 1098140
approved
dealer
New in: new
Seller: country1-de Contec e.K.

Mobile block machine SB 12 for the production of hollow blocks, solid blocks, pavers, U-Stones, wallelements, palisades, kerbstones etc. Capacity up to 12.000 hollow blocks 400 x 200 x 200 mm or up to 600 m² pavingstones per 8 hours production shift. Machine designed from well known components, heavy duty frame, all components easily accessible and maintenance friendly. Machine is hydraulically operated. Web: contec-ek.de

Category: saws
Updating date: 08.06.2019 item-No.: 65464622
approved
dealer
New in: new
Seller: country1-it MISCHI KURT
Location: Europa - Italien
Price: 2.600 €

Double mitre 45° Single mitre up to 90° Cutting width, max. 100 mm Cutting height, max. 160 mm Square cutting 65/65 mm Measuring scale up to 1,500 mm Net weight 90 kg Morso Model F mitring machine cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made. Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work. The special lever system of the machine ensure a very easy operation. Twin return springs automatically bring the knives back to starting position. Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences ( 45° - 90° ), and adjustable ...

Category: saws
Updating date: 30.10.2019 item-No.: 142894336
approved
dealer
New in: used
Seller: country1-de Moser Werkzeugmaschinen

Vertical band saw DANOBAT Model FP 50.50.120 Built 2002 Vertical band saw with automatic sawband tension, digital display of cutting speed, chip conveyor, feed indicator of the saw table and much more, free from running operation due to new acquisition Saw capacity for right-angled cuts 500 x 500 x 1200 mm Table height 1189 mm Diameter of flywheels 600 mm Belt speeds 16 - 140 m/min Tape dimension 5265 x 31 x 1.3 mm Leistng main engine 5.5 kw Dimensions of the machine 3153 x 1870 x 2725 mm Weight approx. 4700 kg

Category: saws
Updating date: 16.09.2017 item-No.: 65281689
approved
dealer
New in: used
Category: saws
Updating date: 16.09.2017 item-No.: 65282817
approved
dealer
New in: used
Category: saws
Updating date: 27.02.2020 item-No.: 145088012
approved
dealer
New in: used
Seller: country1-nl Mach4metal

Sheet thickness: 20,00 mmBending length: 3000 mmNumber of rolls: 4   Make Davi MCB 20 mm Type MCB 3034 Year 1997 Hydraulic 4 roll plate bender Sheet thickness (mm) Bend = 20 mm Bending length (mm) Pre = 16 mm Number of rolls Length = 3000 Top roll = 340 mm Conical bending Hydraulic machine / drop end Digital readout side rolls Power 25 Hp .mach4metal.com 

Category: saws
Updating date: 27.02.2020 item-No.: 145087521
approved
dealer
New in: used
Seller: country1-nl Mach4metal

Sheet thickness: 42,00 mmBending length: 2500 mmNumber of rolls: 4   MACH-ID   5190 MAKE        DAVI TYPE          MCB 2543 YOP             1997 SPECIFICATIES Werking Hydraulisch / Mechanisch      Hydraulic 3 of 4 rollenwals        4 roll Plaatdikte= 42 mm Wals lengte      2500 mm Max. wals dikte bij product Ø 2.500      42 mm Max. aanbuiging bij product Ø 2.500      32 mm Boven rol diameter Ø     430 mm Onder rol diameter Ø        400 mm Zij rollen diameter Ø         360 mm Werk snelheid in M/Min.       2-4 M/min. AFMETINGEN Lengte        5000 mm Breedte       2500 mm Hoogte      & ...

Category: saws
Updating date: 27.02.2020 item-No.: 145087811
approved
dealer
New in: used
Seller: country1-nl Mach4metal

Sheet thickness: 13,0 mmBending length: 3100 mmNumber of rolls: 4  CNC Brand: _Unknown / OtherCNC Model: Smart Pro MACH-id   3608 MAKE   DAVI - Promau TYPE     MCB 3028 YEAR    2007 SPECIFICATIONS Controll   Smart - Pro Hydraulic / Mechanical    Hydraulic    3 or 4 roll  4 roll Maximum sheet thickness13 mm Bending length   3100 mm Max. Rolling capacity Ø 2.500  13 mm Max. Prebending capacity Ø 2.500  10 mm Top Roll Ø   280 mm Bottom Roll Ø  260 mm Side Rolls Ø  260 mm Power   15 Hp kW DIMENSIONS Length   5000 mm Width   1500 mm Height   1800 mm Davi mcb 3028  4 roll platebending machine  .mach4metal.com

Category: saws
Updating date: 27.02.2020 item-No.: 145087828
approved
dealer
New in: used
Seller: country1-nl Mach4metal

Sheet thickness: 13,00 mmBending length: 3100 mmNumber of rolls: 4  CNC Brand: _Unknown / OtherCNC Model: Smart Pro SPECIFICATIONS Controll  Smart - Pro Hydraulic / Mechanical   Hydraulic        3 or 4 roll   4 roll Maximum sheet thickness   13 mm Bending length   3100 mm Max. Rolling capacity Ø 2.500   13 mm Max. Prebending capacity Ø 2.500    10 mm Top Roll Ø  280 mm Bottom Roll Ø   260 mm Side Rolls Ø  260 mm Power  15 Hp kW .mach4metal.com

Category: saws
Updating date: 27.02.2020 item-No.: 145088157
approved
dealer
New in: used
Seller: country1-nl Mach4metal

Sheet thickness: 4,00 mmBending length: 3000 mmNumber of rolls: 3   Make Davi 3.000 x 2 Type MAS 3014 Year 09 - 2002 3 roll hydraulic plate bender Sheet thickness (mm)T = 4 mm Bending length (mm) L = 3.000 mm Number of rolls side roll 140 mm 400 v / 2 Hp .mach4metal.com 

Category: saws
Updating date: 27.02.2020 item-No.: 145087651
approved
dealer
New in: used
Seller: country1-nl Mach4metal

Sheet thickness: 6,00 mmBending length: 2000 mmNumber of rolls: 4  CNC Brand: _Unknown / OtherCNC Model: Smart Pro MACH-id    4117 MAKE       DAVI PROMAU Italia TYPE         MCA 2017 YEAR        2009 SPECIFICATIONS Controll         SMART PRO Hydraulic / Mechanical        Hydraulic 3 or 4 roll         4 roll Maximum sheet thickness        6 mm Bending length     2000 mm Max. Rolling capacity Ø 2.500    6 mm Max. Prebending capacity Ø 2.500     5 mm Top Roll Ø    170 mm Bottom Roll Ø   160 mm Side Rolls Ø       160 mm Power      5.5 Hp  kW    Working speed M/Min.      0 - 8 M/min. DIMENSIONS Length ...

Category: saws
Updating date: 17.02.2020 item-No.: 144912746
approved
dealer
New in: used
Seller: country1-de Hilco Industrial
Location: Lüdenscheid

Unwind Section Slitting/ Draw Roll Section Rewind Section Control and Drive Section Shaftless Unwind Stand Upgrade to US50B Shaftless Unwind Stand Roll dia. 1270mm; Rollwidh 1500mm; Roll Weight 1800kg Chuck for 8 inch Steel cores Walk Plate Assembly Integral Splice Table Driven Unwind System - 2 x 20 HP Position Regulated Dancer for Driven unwind Heavy Duty unwind Upgrade 1500mm dia, 3000 kg Anti telescoping units Gates around Unwind Slitting tooling: Shear knif shafts, Femal Shaer knives (90mm ID), Dovetail Mount Pneumatic knives, Automatic Knife Positioning systems Rewind Tooling Flanged Rewind Drive Spindle 58/70/76/102/120/150 mm Dia. Rewnd Air shaft Dug Style shaft for resp. diam. ID cores Closed Loop Rewind Tension Control Upgrade to Pneumatic Tail Tie Taping system Individual Taper Heads for Tail Tie Taping Core Set up options Core hopper system Automati ...

Category: saws
Updating date: 26.06.2018 item-No.: 121909869
approved
dealer
New in: 2007
used
Seller: country1-de Schweizer Service

Complete system with all accessories required for installation and operation, see below!Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter Feed rate 12000 mm / min // w axis 6000 mm / minXua2eg8fxRotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filterAll BWF fixators for installation of machine bed and panel

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)