long moulder used for sale

3-part system: 3 tools engaged at the same time 12 axes 4-fold transverse machining up to 35 tools (26 driven) System 1: 6 turnings 12 x 12 mm or 5 x 16 x 16 mm, 4 driven tools transverse System 2: Y2 axle at the back (3 fixed + 6 driven tools) System 3: 2 x 8 station turrets with up to 16 driven tools C-axis on main spindle + 5° mechanical indexing C-axis on sub-spindle + 5° mechanical indexing C-axis on turret + freely programmable angle adjustment

Long belt grinding machine Manufacturer: Samco Type: EG Year of Make: 1987 Grinding length: 3,000 mm Incl. spare straps

The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.

Long belt grinding machine TYPE: LZG-M-1 Table size 2500 x 1000 mm with speed control •For grinding, matting and polishing steel Strip speed: 5-30 m/s infinitely electronically adjustable by potentiometer Electromotive, maintenance-free table height adjustment; Adjustment range: 350 mm Working area: 2300 x 1000 mm Belt dimensions: 6800x150 mm Motor power sanding belt: 5.5kW Max. table load: 200 kg Steel table structure with wooden slats; Incl. adjustable workpiece stop Table guide by means of hardened and ground guide shaft Ø 35 mm and 6-way ball bearings on each side Dimensions sanding pad: 320x350 mm Central and clear control panel Single-sided large column projection: 1000x350 mm Incl. workpiece lighting Fold-out extraction hood for better dust extraction- Diameter of drive roller: 0 300 mm- Diameter of suction nozzle: 0 180 mm- Air Velocity: 2 25 m/s-  ...

Max. rod Ø 20 mm Max. machining length 165 mm Spindle speed 8,000 1/min Max. rod Ø sub-spindle 20 mm Max. speed sub-spindle 8,000 1/min Number of tools that can be used: 21 Turning Tools Multiple Chisel Holders: 6 Driven tools for transverse machining: 3 Front side drilling tool: 4 Rear drilling tool: 8 Speed driven tools: 8,000 1/min

Max. rod Ø 20 mm Max. headstock stroke 205 mm Spindle speed 500 - 10,000 1/min Max. rod Ø sub-spindle 20 mm Max. speed sub-spindle 8,000 1/min Number of tools that can be used: 22 Turning Tools Multiple Chisel Holders: 6 Driven tools for transverse machining: 3-8 Front side drilling tool: 4 Rear Reamer: 4 Speed driven tools: 8,000 1/min Bar Feeder FMB turbo 3-26

Control FANUC 18i-TB Max. rod Ø 32 mm Max. headstock stroke 310 mm Spindle speed 350 - 7,000 1/min Max. rod Ø sub-spindle 32 mm Max. speed sub-spindle 350 - 7,000 1/min Number of tools that can be used: 21 Turning Tools Multiple Chisel Holders: 6 Driven tools for transverse machining: 3 Front side drilling tool: 4 Rear Reamer: 4 Back side machining: 4 Speed driven tools: 5,000 1/min Bar feeder FMB turbo 3-36

Gurutzpe B1800/3 CNC Lathe Fanuc Oi-TD CNC Control, 52” Swing Over Bed, 372” Between Centers, 36” Cushman 4-Jaw Independent Chuck, 41” Swing Over Carraige, Spindle Speeds 1-300 RPM, 4.33” Spindle Bore, Sauter 4-Position Turret, 48,400 Lbs. Weight Capacity (Unsupported), 70,500 Lbs. Weight Capacity (2 Steadies), Hydraulic Tailstock, (3) Roller-Type Steady Rests, Full Length Scale on Z-Axis, Hennig Chip Conveyor [CNC Retrofit 2010]

Key data: 32 mm, 32 mm, 305 mm

CNC Swiss Automatic Lathe Manufacturer : Traub Model : TNL 32 T-9 Control : TX8i-s Year of construction : 2013 Location : Sweden , still in production Delivery period : from January / February 2026 Operating hours : approx. 40 000 h Specifications Spindle Passage mm: 32 Speed max. min-1: 8,000 Power (100% / 25% ED) kW: 6.7 / 10.7 Torque (100% / 40% ED) Nm: 21 / 32 C-Axis Resolution Degree : 0.001 Z - slide travel mm : 305 / 127 (sliding head / short turn) Rapid traverse Z m/min : 20 Sub-spindle Spindle passage mm: 30 Speed max. min-1: 6,400 Power (100% / 25% ED)kW : 3.7 / 5.5 Torque (100% / 40% ED) Nm: 29.4 / 43.7 C-Axis Resolution Degree : 0.001 X - Carriage path , Rapid traverse mm / m/min : 140 / 20 Z-slide travel, rapid traverse mm / m/min : 300 / 20 Tool carrier 1 Can be equipped as a revolver Number of stations : 10 Speed max. min-1: 12,000 Pow ...

Code: 0217 Brand: SAMCO Model: F 3000 Belt sanding machine with double gooseneck and 3 motors, for wood, carpentry, metals, aluminum, composite materials, and various other materials Technical data: Table length mm 3000 Table width mm 800 Vertical adjustment of table mm 850 2-speed belt motor rpm 1400/2800 - Hp 3/4 Automatic table lifting Sanding belt length mm 8000 Sanding belt width mm 120 Gooseneck useful depth mm 600 Gooseneck height mm 200 Overall dimensions mm 4300 x 1500 x 1800 h Weight kg 740

Ref. No. 00891 Name of the Tube Laser Cutting System Manufacturer: BLM Adige Model LT 652/B Year of construction 2002 Laser power 2000 watts Loading length Unloading length Loading length 6500mm and unloading length 3500mm. In 2024, 40,000 euros were invested Operating hours 3 shifts Computer 127,653h Heating HF tube 62.850 h High voltage 119,453 h From order confirmation at the time of purchase Lasertube LT652 Automatic feeder for pipes between 3200 and 6500mm Fully automatic pipe support and unloading device for pipes up to 4500mm Siemens Sinumerik 840D control system Teleservice incl. modem CO2-Slab-Laser Model DC020 Kompakt, Fabr. Rofin Sinar Hamburg Integration RF DC020 Compact Laser Cooling Unit Fine dust filter, Fabr. Donaldson Torit Universal AK-HP Cutting Head, Fabr. Precitec Gaggenau Precitec Interchangeable Cassettes AK-HP 5" HP ZNSE 5"  ...

STAR Swiss lathe S16-R, built in 2001 Swiss lathe SA16-R, Ø16mm with FMB Minimag magazine Pick-up spindle Parts Conveyor Belt Coolant system only ran on oil no chip conveyor

equipped with Iemca Boss 542 new in 2000 - weel tooled - Ge Fanuc 18i-T Control

Key data: 32 mm, 32 mm, 320 mm

Stock number: 4011 CNC lathe SWISS TYPE Manufacturer: TSUGAMI, Type: BO326E-II - 2015 Machine NO.: 22106A, Year of manufacture: 2015 Specifications: Size capacity 32 mm Ø Ma. turning length (fixed guide bush) 320 mm Ma. Turning length (Rotary guide bush) 70 mm Max. threading force of the main spindle M10 Max. speed drilling capacity 12 mm Main spindle effect 3.7/5.5 kw Sub-spindle Sub spindle speeds 8000 rpm Spindle bore 32 mm Driven tool transformer 6000 (4800) rpm Subspindle effect 2.2/3.7 kw Control Fanuc 31i - B Fabr. Axis controlled 6 pc. - X1-X2-Z1-Z2-Y1-Y2 Length: 2400 mm, Height: 2000 mm, Width: 1500 mm, Weight: 3500 kg

CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...

Continuous ball mill with 1.7 m Ø and 8.0 m length, with steel lining, steel balls and drive unit (AEA motor 260 kW / 400 V and Flender gearbox). Previous use: Fine grinding of sand with a throughput of 6 tons/h (at 26 RPM). In regularly serviced condition. Available for an extra charge: Factory overhauled replacement gearbox. There are 2 identical mills available.

Continuous ball mill with 3.0 m Ø and 4.23 m length, with steel lining, steel balls and drive unit (AEG motor 750 kW / 6,000 V and Babcock gearbox). Previous use: Grinding of sand at a throughput of 20 tons/h (at 18 rpm). In regularly serviced condition. Available for an extra charge: replacement lining, rotary valve, etc.

gebr. Long belt grinding machine JOHANNSEN T84 ST YOC 1990 Total connected load: 4.5 kW / 10.3 A Motor power: 3.8 / 4.5 kW 2 belt speeds (13.5 + 27 m/s) Table size: 270 x 80 cm electr. Table lift Belt dimensions: 150 x 7,100 mm Offset (both sides): 450x220 mm 2 sanding shoes Switch for clockwise/counterclockwise rotation Integrated lighting Extraction connection: 140 + 120 mm incl. various sandpapers Machine dimensions (approx. dimensions) W:400 cm D: 131 cm H: 141 cm Weight: approx. 700 kg The machine comes from a 1-man operation.

gebr. Long belt sanding machine incl. brush unit LONG FENCE LZG-S YOC 1995 CE marking available Connected load: 5.0 kW (11.6 A) Motor power: 3.2 / 4.8 kW 2 belt speeds: 700 + 1,400 rpm Table size: 100 x 250 cm Belt length: 6,800 mm Belt width: 150 mm electr. Table height adjustment Table height adjustment range:350 mm Large column projection depth: 1,000 mm (single-sided) Column projection height: 350 mm Selector switch for left/right rotation integr. Lighting Drawer grinding device with removable table insert pneumatic belt cleaning incl. 2 grinding pads: 1x standard + 1x roller sanding shoe Brush unit LANGZAUNER LZB Motor power: 1.3 kW no retail sale! Extraction connection: 180 mm Dimensions (approx. information): L 373 cm W 140 cm H 161 cm Weight: approx. 700 kg Machine in good used condition, as little used.

2 engines  Motorized height adjustment  Table length 300 cm without extraction fan  Space requirement length 430 cm

Honeycomb long goods storage, Remmert, for long goods up to 6.50m, 2,000 honeycombs / cassettes – used - : Price on request! Manufacturer: Remmert Type: Honeycomb Bearing Year of construction. 2013 For long goods up to 6.5m Payload: 4to. More info / Dates and plans to follow Condition: good Available: immediately Location: Austria, Vienna area

Coil turner, usable as a stand-alone machine for dressing coils of all kinds, or at the end of a slitting line for setting up sliced coils as a transfer for a coil packaging system.

General Manufacturer: Citizen Type: Cincom R 07 VI Year of Make: 2012 Control: Citizen Cincom Number of axles: 6 Turning diameter: 7 mm Turning length: 40 mm Thread diameter: 4 m Spindle passage: 12 mm Spindle Speed: 0 – 16,000 rpm Spindle power: 1.1 kW Sub-spindle Speed: 0 – 10,000 rpm Pick-up length: 40 mm C-axis: 1° Tapping diameter: 3 m Tool Carrier Quantity: 2 Number of stations: 13 Turning tools: 5 Drilling tools: 4 Tool shank cross-section: 8 mm Counter-processing Number of tools: 4 Drive Connection 50 Hz 3x: 400 Volts Sub-spindle power: 0.5 kW Total power requirement: 4 kVA Dimensions and weight Dimensions: 1,465 mm x 560 mm x 1,410 mm Weight: approx. 950 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Pneumatic workpiece extraction LNS Tryton 112 Rother mini ...

Slitting line 500 x 0.3-2.5 mm Coil weight . 7 to. Coil I diam 508 mm Coil A Dia. 1,300 mm Coil I Dia. Expenditure. 400 mm Strip number 2-25 Speed 1-150 m/min. Working Guidelines right/left

TRAUB TNM 28 sliding head lathe was built in Germany by TRAUB Drehmaschinen GmbH. The machine, which is distinguished by its high efficiency, is the perfect choice for precise, multi-axis machining of workpieces with a maximum length of 200 mm. All machining processes, i.e. drilling, threading and turning, are performed fully automatically inside a large work space. In order to obtain excellent repeatability of the manufactured parts, the TRAUB TNM is equipped with components of the best technical parameters, i.e. two reliable spindles and an 8-position turret. All this is complemented by an easy-to-use CNC controller with many useful functions. The TRAUB TNM 28 CNC automatic lathe weighs approximately 3000 kg. Technical specifications of the TRAUB TNM 28 CNC turning center - feed in the X/Z axis: 60/200 mm - rapid traverse in the X/X2/Z axis: 15/15/30 m/min - driven tool rotationa ...

Slitting line 2,100 x 14 mm Bandwidth... 2,100 mm Strip thickness 4-14 mm Coil weight.. 35 tons. Coil Diam. I 508-810 mm Coil Diam. Rewinder 750 mm Coil A Dia. 2,000 mm Knife shafts diameter 380 mm Connected load 660 KW

Max. rod Ø 20 mm Max. headstock stroke 205 mm Spindle speed 500 - 10,000 1/min Kdowjyb R Awsvu Nu Ieg Max. rod Ø sub-spindle 20 mm Max. speed sub-spindle 8,000 1/min Number of tools that can be used: 22 Turning Tools Multiple Chisel Holders: 6 Driven tools for transverse machining: 3-8 Front side drilling tool: 4 Rear Reamer: 4 Speed driven tools: 8,000 1/min Bar Feeder FMB turbo 3-26

Welding length: 1600 mm for pipe Ø up to: 800 mm Sheet thickness: 3 - 10 mm electr. Connection: 400 V, 27.5 kVA Weight: 1850 kg Space requirement: 3400 x 1000 x 2700 mm

Long belt sanding machine Johannsen With extraction system Type T 88 K-pneuma Machine No. 10771 For sanding, matting and polishing wood and lacquer surfaces, Wooden and plastic window frames Table size 2850 mm x 1400 mm For grinding long parts that extend beyond the machine Workpiece height maximum 500 mm 2 scraper brushes on the table Table height adjustment by means of handwheel Motor power 6/8 kW Sanding belt left and right rotation Including sanding pad 640 x 140 mm Including pneumatic sanding shoe 300 x 140 mm Upper sanding support throughout Foldable with cover for upper sanding pad Disc diameter 280 mm with support 300 mm x 140 mm Sanding belt dimensions 7800 mm x 150 mm Belt speed 11/22 m/sec. With belt blow-out nozzle With extraction fan Suction nozzle diameter 180 mm With extraction system Extraction system with 9 filters, cotton filter and ...

Long belt sanding machine Johannsen Type T8E Machine No. 14185 Built in 1979 Sanding belt dimensions 7100 mm x 150 mm Table size 2500 mm x 950 mm Upper sanding belt cover Motor power 4 kW Sanding belt 2 speeds left and right rotation Clearance under belt maximum 470 mm Right offset 300 mm Extraction connection diameter 160 mm Dimensions 3750 mm x 1350 mm x H 1400 mm Weight approx. 850 kg

We sell a lot of new threaded rods Thread Metric M20 1200 mm length (Longer than usual!) Galvanized steel Approx. 4000 pieces on pallets NEW

Strip width 1,500 mm, strip thickness 0.5-1.5 mm, coil weight 10 tons. Longitudinal sections 4, straightening rollers 7, coil inside diameter. 508 mm Coil Outside Diam. 1,600 mm

Belt width 1,500 mm, strip thickness 0.5, - 2.0 mm, coil weight 7 tons, straightening rollers 7 pcs. , Longitudinal sliced 4 x , Coil inside diam. 508 mm, coil outer diam.1,600 mm

Belt width 1,500 mm. Strip thickness 0.5 -3.0 mm, coil weight 7 to. Longitudinal cuts 4 pcs., straightening rollers 7 pcs., coil inside dia. 508 mm, coil outside diam. 1,600 mm Facility consists of: Decoiler Pallet truck Pressing arm Overflow table Straightener Longitudinal shears Cross shears Scrap Wrapper Side table

MANURHIN KMX 326 C sliding head lathe was built in 2008 in France by MANURHIN KMX. The machine, distinguished by its high efficiency, was specially designed for precision machining of workpieces with even the most complex geometries. All machining processes, i.e. precision drilling, threading and turning are performed by means of a reliable spindle and tools taken from two capacious turrets. The MANURHIN KMX 326C CNC automatic lathe is offered with equipment, consisting of, among others, a CNC controller, bar feeder and tooling. The total weight of the machine is 2600 kg. Technical specifications of the MANURHIN KMX 326 C CNC lathe - CNC controller: GE FANUC Series 18i-TB - number of axes: 5 (X1, X2, Y, Z, C) - spindle rotational speed: 50-7200 rpm - spindle bore: 26 mm - spindle stroke: 160 mm - 6-position turret (2 pcs.) - bar feeder: FMB turbo 3-36 - toolholders - collets  ...

Key data: 32 mm, 32 mm, 330 mm

CNC Longitudinal Lathe Brand: Star Machine type : SR 32 / 330 Year of manufacture : 1997 Control : - FANUC 16 TCNC Control Location : Hultsfred warehouse Sweden Availability : direct from stock Technical data Max. rod diameter: 32 \[mm\] Main spindle stroke: 310 \[mm\] Main spindle stroke with driven taper: 295 \[mm\] Spindle Power: 7.5 \[kw\] Main spindle speed : 350 – 7000 \[rpm\] C axis on main spindle Number of Turning Tool Holders: 6 Number of powered tool holders: 4 Driven Tools Speed: 350-5000 \[rpm\] Number of tool holders on the combi device: 4 maxi diameter in pick-up spindle: 32 \[mm\] Spindle speed counter spindle : 350-7000 \[rpm\] Power sub-spindle: 3.7 \[kw\] Indexing C-axis sub-spindle: 1° Pick-up spindle stroke: 125 \[mm\] Electrical connected load. : Power: 20 \[kW\] Dimensions: 1700 x 2515 x 1700 \[mm\] W ...

CNC Swiss Automatic Lathe TRAUB TNL 32 9P With control TX 8 i - p Year of Make: 2016 Spindle bore: 32 mm MAIN SPINDLE Speed range: Max. 6400 rpm C Axis SUB-SPINDLE Speed range: Max. 6000 rpm C Axis TOOL TURRET TOP: Speed range: Max. 12000 rpm 10 speed turret ( All driven ) TOOL TURRET ABOVE: Speed range: Max. 12000 rpm 9 speed turret ( All driven ) REAR UNIT Number of stations: 8 Of which powered: 3 ( T 12 , 13 and 14 ) Speed T12 + T 14 ( 12000 rpm ) Speed T 13 : ( 4000 rpm ) With the following accessories: Full protection cab with interior lighting Various powered tools Various tool holders IEMCA Boss 338 Bar Feeder - HD KSS Pump 20 bar Chip conveyor Operating Instructions

GENERAL Project No.: 905832 Quantity: 1 pcs. Manufacturer: TRAUB Type: TNL 20 - 9B Control: Traub TX 8i-s Year of Make: 2022 Condition: Used machine Approx. (hrs): 33180 Program run approx. (hrs.): 16914 DESCRIPTION TURNING Max. turning diameter 20 mm Max. speed main spindle 10,000 1/min Spindle aperture main spindle 20 mm Axes on the main spindle unit C Max. speed sub-spindle 10,000 1/min Spindle passage sub-spindle 20 mm Axes on the sub-spindle unit X/Z/C Tool carrier at the top Number of stations 8 Axes X/Y/Z/H/B Bottom Tool Carrier Number of stations 8 Axes X/Y/Z/H Residual apparatus Number of stations 4 OTHER EQUIPMENT Tool breakage monitoring Splash protection cladding with fully encapsulated working area Lighting in the work area Oil/Emulsion Mist Extraction System Hinge belt chip conveyor Engine is/was operated with oil Co ...

Longitudinal cut-to-length line for the sheet metal industry 1,500 x 1.5 mm Belt width 1,500 mm Band thickness 0.4 -1.5 mm Longitudinal sections 3 Coil weight 3,000 kg# Speed 15 m/min. 3 unwinders Machine very well maintained, immediately ready for use, ex site

Jrion & Denz longitudinal saw Edging saw longitudinal circular saw Type HMS 15 Cutting length 3400 mm Cutting width 650 mm Cutting height maximum 120 mm Width stop can be adjusted motorically at the touch of a button Saw motor 11 kW Hydraulic pump feed 1.5 kW Saw blade feed speed infinitely variable 1 – 60 m/min. Saw blade return 60 m/min. At full capacity of the maximum cutting height of 120 mm, the maximum cutting length is 3200 mm. Saw blade diameter maximum 450 mm Cutting height for saw blade diameter 400 mm, 105 mm Saw blade bore 30 mm Extraction connection diameter 200 mm was mainly used to cut 80 mm thick planks Saw is activated via footswitch Rated current 23 A, frequency 50 Hz Instruction manual included Saw blades included 2 pieces diameter 400 mm, 4 pieces 450 mm Good, ready-to-use condition Machine Dimensions: 5750 mm x 1700 mm x H 1200 mm

GENERAL Project No.: 905777 Quantity: 1 pcs. Manufacturer: TSUGAMI Type: BO326E-II Control: Fanuc 32i MB Year of Make: 2016 Condition: Used machine Approx. (hrs): 49590 DESCRIPTION TURNING 8Axles Max. turning diameter 32 mm Max. turning length 320 mm Max. speed main spindle 8000 1/min Max. power main spindle at ED 10-40/100% 5.5/3.7 kW Spindle aperture main spindle 8-32 mm Axes on the main spindle unit C Workpiece spindle stroke main spindle 320 mm Hollow clamping cylinder on the main spindle Max. speed sub-spindle 8000 1/min Max. power sub-spindle at ED 10-40/100% 3.7/2.2 kW Axes on the sub-spindle unit C Coolant supply through the sub-spindle Workpiece ejection through the sub-spindle Workpiece ejector in the sub-spindle OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Preparation f ...

GENERAL Project No.: 905776 Quantity: 1 pcs. Manufacturer: TSUGAMI Type: BO326E-II Control: Fanuc 32i MB Year of Make: 2014 Condition: Used machine Approx. (hrs): 32126 DESCRIPTION TURNING 8Axles Max. turning diameter 32 mm Max. turning length 320 mm Max. speed main spindle 8000 1/min Max. power main spindle at ED 10-40/100% 5.5/3.7 kW Spindle aperture main spindle 8-32 mm Axes on the main spindle unit C Workpiece spindle stroke main spindle 320 mm Hollow clamping cylinder on the main spindle Max. speed sub-spindle 8000 1/min Max. power sub-spindle at ED 10-40/100% 3.7/2.2 kW Axes on the sub-spindle unit C Coolant supply through the sub-spindle Workpiece ejection through the sub-spindle Workpiece ejector in the sub-spindle OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Preparation f ...

GENERAL Project No.: 905778 Quantity: 1 pcs. Manufacturer: TSUGAMI Type: BO326E-II Control: Fanuc 32i MB Year of Make: 2016 Condition: Used machine Approx. (hrs): 49661 DESCRIPTION TURNING 8Axles Max. turning diameter 32 mm Max. turning length 320 mm Max. speed main spindle 8000 1/min Max. power main spindle at ED 10-40/100% 5.5/3.7 kW Spindle aperture main spindle 8-32 mm Axes on the main spindle unit C Workpiece spindle stroke main spindle 320 mm Hollow clamping cylinder on the main spindle Max. speed sub-spindle 8000 1/min Max. power sub-spindle at ED 10-40/100% 3.7/2.2 kW Axes on the sub-spindle unit C Coolant supply through the sub-spindle Workpiece ejection through the sub-spindle Workpiece ejector in the sub-spindle OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Preparation f ...

Used machine Grinding height 340 mm Belt speed 22 m/s Table width 1,400 mm Table length 2850 mm Sanding belt length 7,800 mm Sliding range 950 mm Weight approx. 1200 kg

Code: 0330 Brand: FBR Model: L 85/1500 - CE Standard Automatic belt sanding machine with double gooseneck for wood, joinery, furniture, window frames, aluminum, metals, and various materials - CE Standard Technical data: Work surface dimensions mm 1450 x 700 Automatic table lift Vertical stroke mm 750 Motor power 3 Hp three-phase Max belt length mm 4500 Belt width mm 120/150 Suction port diameter mm 100 Overall dimensions mm 2550 x 1250 x 1550 h Weight kg 320

Key data: 20 mm, 205 mm

Star ECAS 20 CNC Swiss Automatic Lathe CNC control Star NICS (Yaskawa-Siemens 840DI) Turning diameter 20 mm Turning length 205 mm Spindle diameter 20 mm Spindle speed 500-10,000 rpm Spindle motor 3.7/2.2 kW Min. indexing C-axis main spindle 0.001° Min. indexing C-axis subspindle 0.001° Number of tools on the tower 16x Spindle torsion driven tools 8,000 rpm FMB Turbo 3-26 (3200) LxWxH 6850x1150x1765 mm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Sliding Tailstock CNC Lathe TSUGAMI B0206-II TECHNICAL FEATURES: Year: 2014 NC Type: FANUC series 32i-B Number of axes: 6 X1 Axis Fast Feed Speed: 24000 [mm/min] X2 Axis Fast Forward Speed: 24000 [mm/min] Z1 axis fast feed speed: 32000 [mm/min] Z2 axis fast feed speed: 32000 [mm/min] Y1 Axis Fast Feed Speed: 15000 [mm/min] Y2 Axis Fast Feed Speed: 15000 [mm/min] Maximum diameter in bar: 20 [mm] Minimum speed. Spindle: 200 [rpm] Maximum speed Spindle: 10000 [rpm] C-axis indexing accuracy: 0.001 [°] Spindle power: 3.7 [kW] Minimum speed. Spindle: 200 [RPM] Maximum speed Spindle: 12000 [rpm] C-axis sub-spindle indexing accuracy: 0.001 [°] Spindle power: 2.2 [kW] Number of end device positions: 8 Number of comb positions 1 : 5 Number of motorized comb stations 1 : 3 Comb Turning Tool Speed 1: 8000 [rpm] Number of counter-operation positions: 8 Number of counter ...

Control: FANUC 18i-T Rotary Ø: 32 mm Turning length: 120 mm Max. speed main spindle: 8,000 min/-1 Max. speed sub-spindle: 8,000 min/-1 SLIDE 1 x-travel 1: 65 mm y-travel 1: 350 mm Tool stations 6 / 4 pos. Fixed stations 6 Powered stations 4 SLIDE 2 x-way 2: 265 mm z-path 2: 320 mm Tool stations 2 / 3 pos. Fixed stations 2 Powered stations 3 CARRIAGE Y2 Tool positions 3 / 2 / 2 pos. Exterior machining 3 Interior Machining 2 Powered stations 2 Weight: 4,500 kg IEMCA BOSS bar feeder

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Subframe: longitudinal member -Type: Length 2000 mm -Number: 65 pieces of longitudinal beams available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 2000/120/H110 mm -Weight: 12.4 kg/piece