We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,291 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
working length: 3120 mm Working width: 2451 mm Working height: 750 - 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
grinding diameter: 200 mm grinding length: 340 mm centre height: 100 mm grinding wheel diameter: 350 mm grinding wheel width: 50 mm bore: 127 mm : MK 4/5 work piece spindle speed: 50-500, stufenlos 1/min workpiece spindle - bore: 35 mm grinding head swivelling: 360 ° grinding spindle head - swivable: 12 + - ° grinding spindle speed: U/min : bis 0,05 mm/Ø : bis 0,05 mm/Ø : ±11 ° longitudinal feed of the table: 340 mm table speeds: 0-5 m/min : kg cross travel: mm : kg : mm grinding depth: mm : mm tailstock quill taper MT: 3 MK quill travel: 20 mm centre distance: 340 mm : M 48x3 total power requirement: 4,5 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,02 x 1,2 x 1,45 m overhauled with Tschudin geometrical protocoll. Internal grinding device is not in the offer included. Extra costs 5.000 Euro. Die Werkzeugmaschine entspricht zum derzeitigen Zeitp ...
used
grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Foto von Kürzlich gelieferten ...
new
Power: 7,5 KW Receiver: 270 L weight of the machine ca.: 180 t dimensions of the machine ca.: 1700x600x1270 mm feed pressure: 10 bar liter capacity: 850 l/min connected load frequency: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 8 St. range L-W-H: 720 x 580 x 1000 mm weight: 128 kg : 100Kg je Lade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 1600 mm table width: 800 mm stroke height: 900 mm : 310 mm weight max. in kg: 500 kg weight of the machine ca.: 0,16 t : 1,7 x 0,82 x 0,33 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
grinding diameter: 350 mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
grinding diameter: 450 mm grinding length: 1500 mm centre height: 225 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Steuerung FANUC 18i Maschine wird vor Auslieferung teilrevidiert nach Kellenberger Messprotokoll. -automatische B-Achse mit Hirth Verzahnung -Schleifscheibe rechts 500x80x203,2mm -Werkstückspindelstock in verstärkter Ausführung -Pneumatische Entlastung für den Werkstückspindelstock -H-Reitstock (heavy - verstärkte Ausführung) -Hydraulischer Pinolenrückzug für den Reitstock -Reitstock mit Mikroverstellung für Zylindrizitätskorrektur -Abrichtgerät am Untertisch montiert -Aktive Marposs L ...
used
grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...
new
plate thickness: 5,0 mm tube diameter: 27,9 - 61,0 mm motor: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 93 kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 1,0 t throat: 95 mm table length: 120 mm table width: 120 mm total power requirement: manuell kW weight of the machine ca.: 17 kg. dimensions of the machine ca.: 270x130x330 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 5,48 x 2,0 m Foto von bereits gelieferten Maschine (600mm Spitzenweite) mit gegebenenfalls anderen Optionen. Geometrisch überholt und neu lackiert. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Dre ...
used
grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 250 mm saw band length: 2950 x 27 x 0,9 mm table height: ca. 800 mm band speed: 36/72 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,37 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...
used
grinding diameter: 300 mm grinding length: 620 mm centre height: 150 mm honing diameter: mm stroke: mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m machine overhauled according Tschudin protocoll -Checkomatic DRO with max. 5-axis x und z swivel angle DRO upper table are included swivel angle DRO Workhead or Whellhead upon request -new electrical cabinet -new AC motor for the workhead Internal grinding device upon request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrisch überholt und ne ...
used
grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.The machine will be delivered overhauled. Mechanical overhaul: • Overhaul of the entire machine according to Kellenberger measuring protocol • A new service-friendly cabin • Repainting Electrical overhaul: • New, modern CNC cylindrical grinding machine control system • New built up control cabinet • New drive technology • Exchange of all electric lines, Berus pressure switch, etc. • New absolute glas scales in X- and Z- axis • New absolute rotary encoder (for B-axis) Please remark ...
used
x-travel: 164 mm y-travel: 210 mm z-travel: 70 mm Control: CNC 6000 turning speeds: 40000 U/min tool adaptor: HSK E 25 tool change unit: 7-fach total power requirement: kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 2,3x1,0x1,9 m HSC Milling Machine Portal stand construction for milling and engraving High-frequency spindle HFS 301 40,000 min-1, 3000 watts, HSK 25 E recording Tool length scan Laser sensor system for measuring the workpiece length and workpiece diameter NC controlled part head CNTK 200 center height: 200 mm Clamping device of a groove table Clamping device for clamping round components Coolant circulation system Collet holder Alpha CAM software (AC Mill 2D) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 250 bar control: Beckhoff turning speeds: 1435 U/min engine output: 5,5 kW rivet time adjustable: 2-3,5 sec compressed air: 6 bar total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: 10x4x6 m Ingredients: 16x punch riveting tools 16x rivet feed units 6x Beckhoff control 3x HMI Mobile Panel 3x HMI panels 6x hydraulic units Material: Semi-tubular rivet made of stainless steel - flat head, different lengths Connection of 2 layers of aluminum (0.8 mm), no pre-drilling necessary The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 6 St. range L-W-H: 720 x 580 x 800 mm weight: 100 kg : 100Kg je Lade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
roll diameter: 600 mm roll length: 1800 mm rolls drilled: Flaschenhals Nip adjustment: hydraulisch 0 total power requirement: 132 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter: 520 mm turning length: 1625 mm control: FAGOR 800 TG greates pass round over bed: 530 mm swing diameter over slide rest: 475 mm centre height: 260 mm bed width: 350 mm main spindle bore: 68 mm turning speeds: 1500 U/min rapid traverse: 5 m/min Drive: 10 kW total power requirement: kW weight of the machine ca.: 1,87 t dimensions of the machine ca.: 2,8x1,4x1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
0: 200 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
roll diameter: 550 mm roll length: 1500 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 90 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
0: 200 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Press force max.:: 3000 kN heating plates:: 600 x 630 mm electrically heated:: °C heating power:: kW piston stroke:: 420 mm no. of stages:: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: Bj. 1996 pulling capacity: 100 kn stroke length max.: 2500 mm speed: 1-22 m/min return speed: 2-27 m/min Control: SPS S5-115 U Cast aluminum bars were cleared mechanically on this production line machined (drilling / milling) and separated into individual parts This also includes: -1 broaching machine (HOFFMANN, horizontal) so far for steel processing (Shift rods) - Horizontal broaching machine from Hoffmann - Machine type: RAW 630 x 2500 x100 - year of construction 1984 - Control S5 Siemens - 4 clearing points with 3 partial positions each - 1 x reloading for rear side processing - Loading and unloading: - 3x bunkers for raw parts - 3 x feed belts - Loading and unloading handling with 4 x loading and 4 x unloading grippers - 1 x turning device - 3 x material buffers for finished parts - year of construction 1995 - Siemens S7 control The data for this ad was created with ModulMWS - t ...
used
table diameter: 200 mm table load: 85 kg table height: 125 mm Control: CNC 220 total power requirement: kW weight of the machine ca.: 85 kg dimensions of the machine ca.: 1,0x0,8x0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: 6,0 m3/min rated current: 9 A total power requirement: 2,5 kW weight of the machine ca.: t dimensions of the machine ca.: m swarf cleaner The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
roll diameter: 700 mm roll length: 2200 mm rolls drilled: Kernbohrung Nip adjustment: hyraulisch 0 total power requirement: 160 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 800 mm y-travel: 500 mm z-travel: 600 mm control: FANUC 15 M turning speeds: 6000 U/min 0: 7,5/5,5 kW rapid traverse: 24 m/min total power requirement: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 3,5x3,0x2,8 m double table: tool probe: swarf conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
internal diameter: 200 mm grinding depth: 250 mm swing diameter: 330 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
screw ø:: 120 mm screw length:: 17D screw speedl:: 42 U/min drive power:: 138 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
workpiece diameter: 125 mm module: 4 Control: SIEMENS 840 C x-axis: 105 mm y-axis: 40 mm z-axis: 500 mm total power requirement: 47 kVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: 2,6x2,1x3,1 m with measuring and palletizing system from Hörzer & Fehrenbach for gearwheels (bore receiver) Workpiece diameter: 17-39.5 mm Component height: approx. 6-15 mm Oblique as well as straight toothed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
machine measurements: 2.900 x 700 x 1.700 mm machine weight: 400 kg power capacity: 2,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
roll diameter: 250 mm roll length: 500 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 280 mm y-travel: 460 mm table-size: 280x610 mm table movement: 280x460 mm spindle turning speed range: 40-2500 U/min spindle diameter: mm grinding range: 5,0-125 mm grinding depth: 0,4-5 mm stroke length max.: 92 mm total power requirement: kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1,5x2,8 m Single Column Jig Grinder, conventional, DRO, accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
roll diameter: 400 mm roll length: 1000 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 37 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
roll diameter: 400 mm roll length: 1100 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 2x 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
machine measurements: 1800 x 2300 x 2300 mm machine weight: 1800 kg power capacity: -- kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-axis: 210 mm y-axis: 300 mm voltage: 230 V current: 16 A weight: 260 kg dimensions of the machine ca.: 1,75x1,0x0,9 m 3-axis laser system 2 VitroScan 3D scanning systems LCS-line projector 1200 ANS Iallows for the production of three-dimensional face scans (3D portraits of people) and other 3D glass objects, as well as the internal engraving of photographs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. workpiece diameter: 200 mm min. workpiece diameter: 30 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: M3-M16 Weight: 27 kg working range: 200-1900 mm turning speeds: 300 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: 1800 mm efective widths: je 400 mm length in total: 2000 mm length in width: je 500 mm carrying capacity: je 3000 kg material: Aluminium weight: je 33 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
plate thickness: siehe TD mm pressure: siehe TD t total power requirement: 4 kW weight of the machine ca.: 0,950 t dimensions of the machine ca.: 900 x 1050 x 1300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 125 mm x-travel: 710 mm y-travel: 400 mm z-travel: 200 mm table-size: 1000x630 mm turning speeds: 0-2240 U/min power capacity: 5,5 kW total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: 3,0x2,5x2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter: 150 mm turning length: - mm turning height: - mm control: SINUMERIK 840D SL x-axis: 830 mm z-axis: 180 mm rapid power traverse in X-and Z direction: 30 / 60 m/min turning speeds: 4500 U/min spindle head: A6 spindle motor: 27 kW spindle bearing diameter: 90 mm circle diameter: 670 mm chucking diameter: 210 mm total power requirement: 36 kVA weight of the machine ca.: 8 t dimensions of the machine ca.: 2,5 x 2,5 x 2,6 m multifunctional, single-spindle Pick-up lathe with vertical spindle Slide arrangement. - CNC control Siemens 840D SL - C axis - Chip conveyor - cooling unit - Feeding - disc turret with tool drive 12-fold 2 identic units available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2700 x 2300 x 1350mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.