We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,582 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
machine measurements: 1800 x 2300 x 2300 mm machine weight: 1800 kg power capacity: -- kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...
used
grinding diameter: 300 mm grinding length: 620 mm centre height: 150 mm honing diameter: mm stroke: mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m machine overhauled according Tschudin protocoll -Checkomatic DRO with max. 5-axis x und z swivel angle DRO upper table are included swivel angle DRO Workhead or Whellhead upon request -new electrical cabinet -new AC motor for the workhead Internal grinding device upon request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrisch überholt und ne ...
used
grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.The machine will be delivered overhauled. Mechanical overhaul: • Overhaul of the entire machine according to Kellenberger measuring protocol • A new service-friendly cabin • Repainting Electrical overhaul: • New, modern CNC cylindrical grinding machine control system • New built up control cabinet • New drive technology • Exchange of all electric lines, Berus pressure switch, etc. • New absolute glas scales in X- and Z- axis • New absolute rotary encoder (for B-axis) Please remark ...
used
x-travel: 164 mm y-travel: 210 mm z-travel: 70 mm Control: CNC 6000 turning speeds: 40000 U/min tool adaptor: HSK E 25 tool change unit: 7-fach total power requirement: kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 2,3x1,0x1,9 m HSC Milling Machine Portal stand construction for milling and engraving High-frequency spindle HFS 301 40,000 min-1, 3000 watts, HSK 25 E recording Tool length scan Laser sensor system for measuring the workpiece length and workpiece diameter NC controlled part head CNTK 200 center height: 200 mm Clamping device of a groove table Clamping device for clamping round components Coolant circulation system Collet holder Alpha CAM software (AC Mill 2D) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 250 bar control: Beckhoff turning speeds: 1435 U/min engine output: 5,5 kW rivet time adjustable: 2-3,5 sec compressed air: 6 bar total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: 10x4x6 m Ingredients: 16x punch riveting tools 16x rivet feed units 6x Beckhoff control 3x HMI Mobile Panel 3x HMI panels 6x hydraulic units Material: Semi-tubular rivet made of stainless steel - flat head, different lengths Connection of 2 layers of aluminum (0.8 mm), no pre-drilling necessary The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: M3-M16 Weight: 27 kg working range: 200-1900 mm turning speeds: 300 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: 1800 mm efective widths: je 400 mm length in total: 2000 mm length in width: je 500 mm carrying capacity: je 3000 kg material: Aluminium weight: je 33 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter: 520 mm turning length: 1625 mm control: FAGOR 800 TG greates pass round over bed: 530 mm swing diameter over slide rest: 475 mm centre height: 260 mm bed width: 350 mm main spindle bore: 68 mm turning speeds: 1500 U/min rapid traverse: 5 m/min Drive: 10 kW total power requirement: kW weight of the machine ca.: 1,87 t dimensions of the machine ca.: 2,8x1,4x1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
plate thickness: siehe TD mm pressure: siehe TD t total power requirement: 4 kW weight of the machine ca.: 0,950 t dimensions of the machine ca.: 900 x 1050 x 1300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2700 x 2300 x 1350mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 3 kW weight of the machine ca.: 1,54 t dimensions of the machine ca.: 3100 x 1350 x 1260mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 2000 kN chamfer lenght: 3100 mm distance between columns: 3240 mm Control: Infinitron ram stroke: 400 mm work height max.: 1104 mm throat: 250 mm table width: 160 mm pre-running speed: 160 mm/s working feed: 1-10 mm/sec return speed: 160 mm/sec tank capacity: 550 l total power requirement: 28 kW weight of the machine ca.: 16,6 t dimensions of the machine ca.: 4,4x2,7x3,4 m CNC control Infinitron Hydro cushion MHK 1-30 Three-point die holder DH 1-30 Stop system A2 with a travel range of 600 mm Adjustment of the stop slide along the stop bar by separate controlled Z-axes Sheet metal support system H 2 Adjustment of the individual sheet metal support brackets through separately controlled W-axes Bracket SK 10 with lifting aid 0-45 ° with linear guide The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: Bj. 1996 pulling capacity: 100 kn stroke length max.: 2500 mm speed: 1-22 m/min return speed: 2-27 m/min Control: SPS S5-115 U Cast aluminum bars were cleared mechanically on this production line machined (drilling / milling) and separated into individual parts This also includes: -1 broaching machine (HOFFMANN, horizontal) so far for steel processing (Shift rods) - Horizontal broaching machine from Hoffmann - Machine type: RAW 630 x 2500 x100 - year of construction 1984 - Control S5 Siemens - 4 clearing points with 3 partial positions each - 1 x reloading for rear side processing - Loading and unloading: - 3x bunkers for raw parts - 3 x feed belts - Loading and unloading handling with 4 x loading and 4 x unloading grippers - 1 x turning device - 3 x material buffers for finished parts - year of construction 1995 - Siemens S7 control The data for this ad was created with ModulMWS - t ...
used
table diameter: 200 mm table load: 85 kg table height: 125 mm Control: CNC 220 total power requirement: kW weight of the machine ca.: 85 kg dimensions of the machine ca.: 1,0x0,8x0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 3 kW weight of the machine ca.: 1,28 t dimensions of the machine ca.: 2600 x 1350 x 1260 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 800 mm y-travel: 500 mm z-travel: 600 mm control: FANUC 15 M turning speeds: 6000 U/min 0: 7,5/5,5 kW rapid traverse: 24 m/min total power requirement: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 3,5x3,0x2,8 m double table: tool probe: swarf conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: 6,0 m3/min rated current: 9 A total power requirement: 2,5 kW weight of the machine ca.: t dimensions of the machine ca.: m swarf cleaner The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
throat: min/max ca. 98-110 cm dimensions: ca. 40 x 8 x 256 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
workpiece diameter: 125 mm module: 4 Control: SIEMENS 840 C x-axis: 105 mm y-axis: 40 mm z-axis: 500 mm total power requirement: 47 kVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: 2,6x2,1x3,1 m with measuring and palletizing system from Hörzer & Fehrenbach for gearwheels (bore receiver) Workpiece diameter: 17-39.5 mm Component height: approx. 6-15 mm Oblique as well as straight toothed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
bore capacity in steel (diameter): 3 - 5 mm throat: 150 mm bore stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Various Special purpose drilling machines The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Number of axles: 2 St. length: 7,7 m total wight: 20 t axis load in front: 10 t axis load in the back: 10 t width: 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
internal diameter: 200 mm grinding depth: 250 mm swing diameter: 330 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. workpiece diameter: 200 mm min. workpiece diameter: 30 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter: 150 mm turning length: - mm turning height: - mm control: SINUMERIK 840D SL x-axis: 830 mm z-axis: 180 mm rapid power traverse in X-and Z direction: 30 / 60 m/min turning speeds: 4500 U/min spindle head: A6 spindle motor: 27 kW spindle bearing diameter: 90 mm circle diameter: 670 mm chucking diameter: 210 mm total power requirement: 36 kVA weight of the machine ca.: 8 t dimensions of the machine ca.: 2,5 x 2,5 x 2,6 m multifunctional, single-spindle Pick-up lathe with vertical spindle Slide arrangement. - CNC control Siemens 840D SL - C axis - Chip conveyor - cooling unit - Feeding - disc turret with tool drive 12-fold 2 identic units available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
module: 12 diameter: 233 mm Bore diameter: 100 mm width: 274 mm number of teeth: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
module: 11 diameter: 315 mm Bore diameter: 60 mm width: 202 mm number of teeth: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
table length: 4000 mm table width: 2000 mm table height: 600 mm number of T-slots: number of T-slots: 6 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 280 mm y-travel: 460 mm table-size: 280x610 mm table movement: 280x460 mm spindle turning speed range: 40-2500 U/min spindle diameter: mm grinding range: 5,0-125 mm grinding depth: 0,4-5 mm stroke length max.: 92 mm total power requirement: kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1,5x2,8 m Single Column Jig Grinder, conventional, DRO, accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
working width: 3000 mm Number of gangs: 3 St Number of folders: 0 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
module: 10 diameter: 354 mm Bore diameter: 90 mm width: 140 mm number of teeth: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
external diameter: 112 mm bore diameter in mm: 32 mm width: 130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-axis: 210 mm y-axis: 300 mm voltage: 230 V current: 16 A weight: 260 kg dimensions of the machine ca.: 1,75x1,0x0,9 m 3-axis laser system 2 VitroScan 3D scanning systems LCS-line projector 1200 ANS Iallows for the production of three-dimensional face scans (3D portraits of people) and other 3D glass objects, as well as the internal engraving of photographs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 360 mm saw band length: 5000 x 34 x 1,1 mm cutting width: 640 mm cutting capacity - flat: 510 x 360 / 30° mm cutting capacity - round: 360 / 30° mm cutting capacity - square: 360 x 360 / 30° mm cutting capacity - flat: 390 x 360 /45° mm cutting capacity - round: 310 /45° mm cutting capacity - square: 360 x 360 / 45° mm cutting capacity - flat: 250 x 360 /60° mm cutting capacity - round: 310 / 60° mm cutting capacity - square: 270 x 270 / 60° mm cutting capacity - flat: 640 x 360 / 90° mm cutting capacity - round: 360 / 90° mm cutting capacity - square: 360 x 360 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 1,1 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 4,3 kW weight of the machine ca.: 1630 kg dimensions of the machine ca.: 3000 x 1200 x 2000 mm Accessories: • Inverter • hydraulical vice • automatical ...
used
module: 10 diameter: 356 mm Bore diameter: 90 mm width: 140 mm number of teeth: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
floor-plate length: 3740 mm floor-plate width: 2400 mm floor-plate height: 300 mm width of T-slots: 45/80 mm T-slot - distance: 300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 125 mm x-travel: 710 mm y-travel: 400 mm z-travel: 200 mm table-size: 1000x630 mm turning speeds: 0-2240 U/min power capacity: 5,5 kW total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: 3,0x2,5x2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 1000 mm y-travel: 500 mm z-travel: 700 mm table surface area: 1250 x 700 mm spindle taper ISO: 50 spindle turning speed range: 20 - 3200 U/min quill stroke: 100 mm semi-automatic operated: Phillips 432 Number of working hours: 62.340 h main drive motor: 22 kW total power requirement: 27 KVA weight of the machine ca.: 7,7 t base area: 3,8 x 4,1 x 2,4 mm accessories:: hydr. Schraubstock X axis, longitudinal 1,000 mm Y axis, vertical 500 mm Z axis, cross 700 mm Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Divider as 4th axis with housing of the working area The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
length: 4800 mm width: 3740 mm number: 1 Thickness: 300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
floor-plate length: 5000 mm floor-plate width: 2000 mm floor-plate height: 300 mm number of T-slots: 8 width of T-slots: 28/48 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
floor-plate length: 6400 mm floor-plate width: 1875 mm floor-plate height: 400 mm number of T-slots: 6 width of T-slots: 36/64 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. wheel diameter: 3000 mm gear width: 1200 mm max. module: 30/40 min. module: 2 table diameter: 2500 mm table load capacity: 400 kN hob dia. - max.: 450 x 500 mm milling spindle speeds: 10 - 165 U/min hob length max.: 500 mm tip circle diameter: 2050 mm tooth helical angle min/max: 0 - 45 ° center distance betw. workpiece-tool min/max.: 150 - 1750 mm milling slide swivelling: 50 Grad distance table / counter stay: 1050 - 2050 mm shifting: 300 mm workpiece weight: 40 t table bore diameter: 800 mm depth of hole: 1100 mm main drive motor: 37 kW min. workpiece diameter: 290 mm min. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1800 mm/min radial feed: 1 - 500 mm/min feed: Tangential 1 - 450 mm/min rapid traverse: 1875 / 530 / 470 mm/min electrics - voltage/frequency: 380 / 50 V/Hz control: Siemens Sinumerik 3M total power requirement: ...
used
Working widths: 2000 mm roll surface width: 2200 mm Fabric content: 48 Meter 0: 160 mm Roller covering: ALU Clouth speed: 20 - 200 m/min Cloth tension: 20 - 500 N voltage: 400 V / 50 Hz output: kw weight: t dimensions of the machine ca.: m cloth accumulator: 48 meters capacity Number of rolls: 15-axis guide rolls, Ø 160 mm made of aluminum type of material: double polyamide foil hose material thickness: 2 x 15 my to 2 x 50 my movable roller mill is moved up and down with 4 ball screws unit was disassembled after test run for transport The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 500 mm y-travel: 500 mm z-travel: 350 mm table surface area: 800 x 450 mm spindle taper: ISO: 40 quill stroke: mm feed - longitudinal/cross: mm/min feeds vertical: mm/min turning speed range: max. 3150 U/min voltage: 380 V / 50 Hz power capacity: 4 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
width: 1300 mm height: 2500 mm depth: 1300 mm thickness of clamping plate: 50 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
floor-plate length: 5000 mm floor-plate width: 1800 mm floor-plate height: 290 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
length: 5.000 mm width: 2.000 mm Thickness: 210 mm material: Stahlguss total power requirement: kW Weight: 6000 kg dimensions of the machine ca.: m Measuring plate / alignment plate as good as new, with integrated alignment points, 3 x longitudinal T-slots, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.