lift master used for sale

PLC control, expansion module, interface module, interface module, AS-Interface actuator module, AS-Interface sensor module, connection, electronic modules, electronic block, power module, DP master interface -Manufacturer: Siemens, Simatic DP master interface -Type: 6ES7 138-4HAOO-OABO -Number: 1x module available -Price per piece -Dimensions: 75/45/H1220 mm -Weight: 0.1 kg/pc.

PLC control, central assembly, RAM, CPU, central device, central processing unit, compact device, compact CPU, central processing unit -Manufacturer: Schleicher, Master CPU Central Processing Unit -Type: UCN 31306786 -Quantity: 1x module available -Dimensions: 150/35/H200 mm -Weight: 0.6 kg

Type CK-3000B Height of working table 800mm Working depth 80mm Working length 2500mm Motion controller Loran Max traveling speed 150m/min Max working speed 105m/min Control system TPR Spindle power 2x 2.2 kW Spindle speed 0-18000 rpm Transducer Jiale Air pressure 0.6-0.8 Mpa Motors power 750+750+400W Transport dimensions 4200x1700x1400mm Weight 900KG Price 6499 Eur (EXW Jonava, Lithuania)

Fiber optic cable, fiber optic cable HUBER+SUHNER FIBEROPTIC Masterline 11 66522/13 22520752 left plug: SMA right plug: SMA length: approx. 2.5 m 1-wire New ! Dimensions (packaging): 270 x 270 x 10 mm

Due to replacement with new machinery, I am selling Pedrazzoli brand pipe benders, Bend Master 42E model with Cybelec 7300CC control, year 1987. Maintenance carried out by official assistance, perfectly functional with the possibility of seeing it in operation. In addition, I am selling a set of 63 matrices for tubes with a diameter of 8 mm to 40 mm, the table of which is attached.

Mec 2047ES Scissor Lift 4 x new Crown Deep Cycle lead-acid batteries CR-225 HD (as of 06.10.2023) Brand: MEC Model: 2047ES Type: Scissor Lift Year of construction: 2006 Working height max. 8.10 m Platform height max. 5.98 m Platform height – retracted 1.62 m Platform extension 0.91 m Platform width – outside 1.15 m Platform length - outside 2.31 m Platform length - extended outside 3.39 m Railing height 1.10 m Height of skirting board 0.15 m Height – retracted: Folding railing 2.10 m Height – retracted: railing folded down 1.62 m Length - retracted 2.51 m Length - with extended platform extension 3.33 m Width 1.19 m Achievement Max. people on the platform (indoor/outdoor) 2/2 Load capacity 567 kg Load capacity - platform extension 113 kg Movable up to a height of 5.98 m Travel speed - retracted 4.0 km/h Travel speed - extended 1.0 km/h Gradea ...

properties: Used lifting table of the manufacturer Büter Condition: fully functional with signs of use Ideal for fast material transport Expertly dismantled and packaged 2 pcs available Price per piece specifications: Dimensions of the roller conveyor Manufacturer: Büter Type: H15-20 Model: BB2 1500/3 PL Machine No.: WB1005148 Drive type: Hydraulics Year of construction: 2010 Net weight: 2.500Kg Nominal load: 1.500Kg Total length: 2.620mm Total width: 1.350mm Roll width: 1.170mm Roller axle spacing : 155mm Diameter approx.: 80mm Total height retracted: 475m,m Material: steel, galvanized Color: Red / Light Gray Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt tracks, inclined conveyors or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or a ...

Sweden made hydraulic scissors table. Manufacturer: Trans Lyft Type: TLH 1000 Year of construction: 1982 Weight Capacity: 1000 kg Overall Size while fully opened: 3400 x 620 x 1100 mm Overall Size while fully closed: 3400 x 620 x 255 mm Base size: 2600 x 600 mm Lifting surface: 3400 x 620 mm Max lifting height: 1000 mm

Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic power unit)Year of construction 1991 Nominal load capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mm Stroke max. 930 mm Construction height - bottom 100 mm (with installation frame) Construction height - top 1030 mm Hydr. Operating pressure 350 bar = lifting capacity 1000 kg Hydraulic engine power 1.5 kW Mains connection 400 volts, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is actuated - without hydraulic power unit - without electrical control Length of mounting frame 2270 mm Width of installation frame 1580 mm Height of installation frame = height below 100 mm Dead weight Lifting table 500 kg good condition; used

UP Mini , Uni Push Repair / inspection and replacement pradler gear technology Pradler Transmission Technology info@pradler.com Service and Replacement PradlerGetriebetechnik.de Tel. 05242 / 43186 email: info@pradler

Lifting and Turning Device for beverage paper roll consists of: Jumbo Reel Lifting and Turning Device for beverage carton paper rolls, your choice: manual (manufacturer BT), with battery electrical lifting (manufacturer Tetra Pak)or with battery electrical lifting and autom. hydr. turning (manufacturer BT)

Lift table Hydr. mobile FHT 500 technical data: load-carrying capacity 500 kg table dimension 855x500x50 mm Max vertical lift 900 mm min table height 340 mm clutch height 970 mm foot pedal beating to max. height 55 roles of diameters 127 mm net weight 120 kg SPECIAL PRICE ASKS ASK FOR!

Load 150 kg

Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Used lifting column unloader of the trays with a mechanical device used to unload the container process granules distributed on trays. The device is equipped with a shredder granules. The device has a complete DTR manufacturer. Specifications: max. capacity: 160 kg Tray size: 35x600x1000 mm max. number of trays: 8 max. process container height: 1300 mm prod.1997 year max. External dimensions: height. 3080 mm, width. 1550 mm, 1820 mm length Material: AISI 316 / AISI 304 implementation class: EEx e II T 3

Inclined lift with motorized winch (7.5 kW / 36 UPM), lifting bucket (1,000 l. usable volume), weighing frame / foot station (2,000 kg max.), 25 m rope and head station for material transfer. Rope and SEW winch drive are new; Elevator was used to feed an Eirich intensive mixer type R(V) 18. Technical documentation is available.

Product number: 965 Type: L120 Serial number: 1-2498 Year of construction: 1998 Power: 3 x 400V, 50Hz, 2.2kW Tilting height: 2460 mm Dimensions: 1720 x 1950 x 3600 mm

Technical data: with driven rollers Roll width: 1,200 mm Wide lifting table 1,400 mm Length lifting table: 3,350 mm Height retracted: 900mm Max lifting weight: 5 to Lifting height: 1,000 mm Platform size (length x width) With built-up roller movement: Roll length: Roll diameter: 164mm Roll spacing: 640mm

Lifting tipper table tipper Model: T 600 S Lifting load max. 600 kg lifting height max. 1100 mm tilt angle approx. 45 bracket for tank wagon stainless steel protection device standard with a totman control Geraet mobile with locking DGUV V3-pru ; ready to be available!

Built in: 1989 Size: max 1.700 x 1.300 mm lifting capacity: max 2.000 kg Stroke height: 1.000 mm ; working condition

J. Engelsmann mobile lifter for containers etc., max. weight 300kg, fork length approx 700mm, fork diameter 50mm, fork gap approx. 600mm, max. lift approx. 1700mm from the floor.

Manufacturer: Yale Type: MOS10 Type: Carrying capacity: 1000 kg Mast: standard Battery: 24V, 375Ah lifting height: 1600mm number of tyres front: 2 Number of tyres rear: 2 Ideal for the following applications: Scales transports over long distances; Laengerer operating cycles and multi-shift operation; storage equipment in low or medium-high and high shelving systems; Ergonomic features 5-point wheel rest and fixed stabilizing wheels ensure increased stability and greater safety when cornering. Without mounting gear and fork!

Installation consisting of 2 lifting tables (in the form of a staircase) each with 1,500 kg load capacity, lifting height: 1.2 m each, incl. base for the higher lifting table (1.5 m high), hydraulic unit and control cabinet. Tables can also be used individually.

Lifting installation with 2 lifting tables (staircase layout), each table with 1.500 kg elevating capacity, lifting height: 1,2 m each, incl. base frame for upper table (1,5 m high), hydraulic power pack and switchgear cabinet. Tables can be operated separately, too.

Naehmaschine Brother Exedra E-100 Mark II, Foot Lifter FB II, MD-816B; You buy an industrial naehmaschien from Brother Naehmachine Brother Exedra E-100 Mark II, Foot Lifter FB II, MD-816B, DB2-B737-413 380V

Manufacturer: Siemens Model: SPL Year of manufacture: 03/2000 Type: SPL Pressure: 5 bar Flow rate: 50 NI/min Voltage: 230/115 V Output: 0.4 kW External dimensions: 1, 05m x 0, 55m x 1, 20m Lxwxh

VINCA TO300-INOX stainless steel mobile lifting and tipping device for drums, barrels etc., maximum lift 160kg, maximum lift height 1636 mm. Year 2011 (2 available)

New lift elevator motor because a insolvency to a special price - Manufacturer: LOGOS Innovationen GmbH - Type LDS-320 - Asynchronous motor 15KW Manufacturer EMOD - Belt drive 4 belts - Speed 1m / s - Suspension 2: 1 - Payload 1250 Kg - 2 magnetic brakes from Mayr 2x550Nm braking force - including test protocol

Stack lifter Hunkeler AS 1000; Format 800x1200mm; Carrying capacity 1000kg; Hand or foot operation; Checks for function. Pile lift hunkeler AS 1000; size 800x1200mm; lift capacity 1000kg; Hand or foot switch; checked on function.

Bohle HS400 lifting and turning device for containers, suitable for use with feeding tablet presses, capsule fillers etc. Up to 400kg lifting capacity

Boiler lifting tipper Diosna Model: HK 115 For planetary boilers Stainless steel 2 tipping heights DGUV V3 tested Y.O.M. 2010 Device mobile with fixed device Connection 400V, 16A-CEE plug Used machine inawhichandy and tested with 6 months warranty

E-shaped platform for re-entry with hand forklift truck, foot protection contact strip, pedal operation

with stage for Diosna W 401 A boiler mobile on wheels with brake Load capacity max. 600 kg lift and tilt dough into pickers and other bakery machines

-suitable for Diosna Wendelkneter W 240 A boiler -Table lift tipper -Boiler pliers lock -with friction wheel drive and boiler shearer -mobile

Kemper lifting tipper Type: HK 200L, HK 200R, HK 200LD 5 pcs Available

Lift tipper Kemper HK 150 height 330cm -for Kemper Kessel or with stage for Diosna Kessel -Height 330cm -400 volts

TECHNICAL DATA: Dimension mm: 3300 x 1100 Payload Kg: 1000

HIDRAL EH-1500 goods lift was manufactured in 2013. The steel-framed goods lift is used in halls and warehouses where the transport of heavy goods between floors is needed. Powered by a hydraulic cylinder, the crane allows the movement of goods with a total weight of 1000 kg between three stops, located at levels 0mm, 2800 mm and 5500 mm. The platform is installed in a shaft with dimensions (L x W x H) of 1700 x 1560 x 8155 mm and moves at a speed of 0.2 m/s. It is controlled by a relay. Technical parameters of HIDRAL EH-1500 goods lift - level heights corresponding to the floor level: R0 – 0 mm, R1 – 2800 mm, R2 – 5500 mm - lifting capacity: 1000 kg - platform speed: 0,2 m/s - lifting height: 5,5 m - number of stops: 3 - platform shaft: steel structure clad with trapezoidal sheet metal - shaft dimensions (L x W x H): 1700 x 1560 x 8155 mm - type of control: relay -  ...

TECHNICAL DATA: Dimensions mm: 3500 x 2000 x 2240 H Panel dimensions mm: Length mm: 1800-2280 Max width mm: 80 Capacity Kg: 100 Speed mt / min: 38 Height min. loading / unloading mm: 250 Height max. loading / unloading mm: 1500 Grip type: Suction bar

Stage bracket for Kemper HK 150 lift truck

Stage bracket for Kemper HK 150 lift truck -for lifting and tilting Kemper boilers

Electronic Scissor Lift Fabr. TREPEL Type M-Boy 4Machine -No: 30706872, built in 1985Load capacity: 500 kgOperating pressure max.:160 barTable size: 710 x 600 mmHeight retracted: 470 mmMax. Extension height: 920 mmOperating pressure: 160 barDrive power: 1.1 kWExternal dimensions retracted: 650 x 900 x 470 mmPower connection: 380 V / 50 HzWith- Remote control with 3.0 m cable- freely installable limit switchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Stage bracket for Kemper lifter -Boiler lifter stage

MEILLER TIGER LIFT Electric lifter 1000kg All data on photo. Machine was almost unused. New two batteriess and integrated charger.

Stock# U2333-10 Used stainless steel vertical lifting device for rising and tilting pans. Working height of rising up to 320 cm. Total height of the tower 396 cm. Machine is equipped with stainless steel cart for mounting pans with distance between holders 1115 mm. Pan is tilted manually through gearbox. Machine is equipped with electrically driven hoist with working capacity up to 500 kg. Together with machine are included two stainless steel pans: First with volume 350 l - made by Kates (PL). Tank has internal dimensions: diameter 770 mm x length of straight side of wall 760 mm. Flat bottom, no discharge outlet. Top open, with stainless steel cover mounted on eigth clamps. Tank has two side wall shafts/supports for tilt discharge. Pan is mounted on mobile stainless steel platform. Second with volume 250 l - made by Kates (PL). Tank has internal dimensions: diameter 630 mm x len ...

Lift tipper stage for DK 250 boiler Kemper HK 200 -Lift tipper stage for WP DK 250 boiler -the stage is for Kemper HK 200 lift era -Stage with boiler drive -Stage with boiler shearer

4 lifting devices are for sale 2 x 1 compartment for receiving two powder guns 2 x 2 compartment duplex for recording 4 powder guns . Lifting devices with trolley chain guide, With drive motor and transmission, As well as with incremental encoder. Inductive switch top / bottom . Connections guided to Harting plug

Overall sizes: 3020x2500x2550 mm #4700 Weight: 2.700 kg Capacity: 30.000 kg Class: A4

Haulotte Work Platform HA 32 PX Y.O.M. 2008 Only approx. 1,050 operating hours Absolute top condition Weight approx. 22to Special price

Load: 2.5 T