lenz used for sale

Frequency converter,Lenze type 8101_E.4G.12.

Hydraulic unit incl. wiring diagram Manufacturer: Aros Hydraulik GmbH Type: HE160-Z21/V5, 5-VAD22/V5, 5-B3/120-LV6P-so. Engines: Manufacturer: Asea motor Type: MBT 132s Power: 5.5 kW Frequency: 3 ~ / 50 Hz Manufacturer: Dietz-motoren GmbH & co. KG Type: 4001540 441883 Power: 5.5 kW Voltage: 380 V Current strength: 11,8 A Valve block: Manufacturer: Lenze Type: 14 128 10 1 0 S 0 Pump: Manufacturer: Sauer / Daikin Type: J V15SA4CRX85 Maximum pressure: 250 bar Filter: Manufacturer: Argo filter Type: HD 046 056 Capacity: 35 l / min Pressure: 210 bar max. New price: approx. 7900

Producer: Suhner Description: - Capacity- 2000l - Brand new microprocesor Mikster MCM 023 - Variable drum speed - Automatic control - Variable pressure level - Pressure measurement; 0-99 % - Manual work mode - 50 programs easy to change - 6 cycles to one program, max cycle time 100h, two phases on cycle - Total time one phase 99 minutes - Brand new inverter Lenze Section responsible for vacuum; - Vacuum pump Busch 36m3 /h - Vacuum valves Danfoss - Total power 5.5 KW ( main motor 4KW + pump 1,5 KW ) - Total weigth 1500 kg - Fully made of stainless steel

WEINIG / GreCon Short Wood Finger-jointing Line Ultra TT Data of the system: • Wood inlet length (min. - max.) 150 - 1000 mm (1300 mm) • Reference timber inlet length at the finger-jointing line 400 mm • The length of the wood to be processed must be at least 25 percent longer than the width of the wood to be processed • Wood thickness (min. - max.) 20 - 80 mm • Reference wood thickness 28 mm • Wood width (min. - max.) 40 - 205 mm • Reference wood width 90 mm • Reference wood cross-section 28 mm x 90 mm • Wood outlet length (min. - max.) 3000 - 6100 mm • Reference wood outlet length 6100 mm • Tine profile (length) 10 – 11 mm • Max. wood cross-section for processing softwoods (with specified tine length) 100 cm² • Max. wood cross-section for processing hardwoods (with specified tine length) 80 cm² • Glue type PVAC • Species: Softwood / ...

Attachment: eccentric screw pump Manufacturer: Netzsch Type: NM031BY02512B Machine number: 409232 Year of manufacture: 2009 Output: 200-300-350 l / h Pressure: 4-6-8 bar Motor: Lenze Speed: 1410 RPM. Inlet connection: DN 50 Port side: DN 50 Length: 1200 mm Condition: used, ready for operation (new stator)

Qty. 1 Second-hand polishing machine Mfc.: Madar Aluminium Built: 2010 Type: PM 2000 Overhauled: No, but the machine was very rarely used. Operation length: 7000 mm Operation width: 800 mm Profile thickness (workpiece thickness): 10 mm up to 200 mm Polishing drive: 2 x 25 kW including converter (Lenze) Power total: 65 kW Siemens PLC system & touchscreen: PLC -SIEMENS S7200 Touchscreen - SIEMENS TOUCH PANEL TP177MICRO ( 1P 6AV6 640-0CA11-0AX0)

Blow-through lock, supply, cell lock, cell wheel lock, cell wheel lock, dosing lock used AZO Ltd. Type: Z100/2P Inlet approx.: 250 mm Height approx. 450 mm Cell wheel approx. 320 mm Cell wheel width approx. 250 mm approx. 8 cells Hole circle flange approx. 335 mm with suction filter Geared motor with variable speed LENZE 11.342.13.12 0.5 kW 3.3 to 50 rpm 220/380 V Total dimensions approx.: 1500 x 600 x 450 mm The lock was used in the food industry. Probably for transport and dosage of sugar. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Pester Pewo pack 250 compact The basic machine PEWO-pack 250 compact comprises the following assemblies (standard equipment): - Degree of protection : IP54 (ST) - Control cabinet : Swivel - Proximity Switch : Wenglor (ST) - Pneumatic version : Pneumatics (ST) - Traffic light indicator : Tricolor (ST) - Electrical version : Electrical standard S rev 15 - Frequency converter : Lenze (ST) - Product feed : straight in the middle Specifications: - Control unit HMI - Type : HMI 15" Pester Tangius (ST) - Control : Elau PacDrive - Voltage : 3x400V+N+PE, 50 Hz/60 Hz - Operating side : right - Protective cover : Acrylic glass (ST) - Paintwork : VA - Design (ST) - Packaging material - film : PE flat film - Documentation - Language : 2x French+1x CD - Documentation - Execution : Standard - Documentation - Supplier : 1x (ST) - Validation : Standard - Machine marking : F ...

Mixing tank 80 liters REITZ MB80 for bulk materials Used open mixing tank approx. 80 liters with geared motor 0.75 KW and inclined blade stirrer 700 mm Application: Mixing of powdered materials. Slow-running, high-torque agitator for powdered mixes. High torque with low energy consumption. Stirred tank: Mobile mixing tank made of stainless steel with bottom slide for draining the mix. All boilers are refurbished and clean. Capacity approx. 80 litres Geared motor: Geared motor Lenze 0.75 KW, 230 / 400 V, 3 phases, 50 Hz, 1410 rpm, IP 55, ratio i = 56, 25 revolutions per minute at shaft output. With motor protection plug to protect the geared motor. Shaft: stainless steel shaft diameter 20 mm, length 500 mm, material 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 700 mm, material stainless steel 1.4571

Breast pump stainless steel with housing, manufacturer MKT Malmi, vario gearbox Lenze, electric motor - Elektrokovina T 90L4, power 1.5 kW/220/380 V, special feature: Vario gearbox Lenze

Spare parts package for a Mosca RO M P2 -Complete paltetine unit / control ecomat 100 S+P Elektronik GmbH -Power supply Siemens SITOP Power 10 (1P6EP1 334-2AAOO Transformer Siemens 4AM 5295-OBG20-ON -4 Dunker drive motors incl. gearbox BG6230; PLG52 etc -Belt drive with Lenze holder -Safety switch Amber (3pcs) -Efektor IN 5208 IN 2004 FRKG (5pcs) Condition Used

Marel Dual Lane Grader This grader is more than just a typical weight-sorting machine – it also offers an additional quality-sorting option. It can be programmed for five different quality grades, which can be set by an operator before the weighing stage. This Marel Dual Lane Grader has 12 gates – 8 on one side and 4 on another. Products that do not pass through any gate proceed straight forward. Moreover, a side with 8 gates can be equipped with two additional trays for the grading-by-weight option. So, in total, this grader can be configured for up to 21 separate outputs. Key Specifications: Production year: 2011 Belt type: Intralox S1600 FT PE Belt size: 356 mm x 18200 mm. Electrical: 3 x 230 Vac, 0.37kW Nominal belt speed: 1.5 m/s at 60Hz Speed is variable, Lenze speed controller. Height of belt over the floor: 1325 mm Overall run length: 9200 mm Run w ...

Breast pump stainless steel with housing, manufacturer MKT Malmi, Vario gearbox Lenze, electric motor - Elektrokovina T 90L4, power 1.5 kW/220/380 V, special features: Vario gearbox Lenze

7,000380mm, heavy duty wheels, Lenze drive with feed speed control

1 PIMATEX ready made garment dyeing machine type MTP050, year 2005, capacity up to 50 Kg, drum diameter 120 cm, drum depth 85 cm, drum volume 960 L, drum with 3 compartments, with sampling device, with 8 add vats, equipped with AREL type ATC 304+ dye cycle controller, exterior heat exchanger and pump, machine fully LENZE and ABB inverter controlled

Radio interference filter, LENZE E82ZZ55234B210 00450969 500 V unused ! Dimensions: 340 x 100 x 70 mm

Decentralized motor starter, control electronics LENZE ELCAMZI 1524SNNPSNN ( ELCAMZI1524SNNPSNN ) 13018015 4500198773 Input: 400 / 500 V Output: 24 V DC 1,5 kW Ersatzteil für Köberlein S 160 700 Dimensions: 420 x 290 x 160 mm

Mains filter B LENZE E82ZN22334B230 00459634 500 V 3 x 42 A unused ! Dimensions: 410 x 240 x 120 mm

Roller shutter control EFAFLEX 87751 150 1,1,5 kW 230 V AC 50 Hz Gate control board: 1197498 MC 005 102 04 08 05 Inverter: LENZE 8200 vector E82EV152_2C900 used, tested ! Dimensions: 600 x 250 x 630 mm

Roll-up door control EFAFLEX mpc2 1.5 kW 230 V AC 50 Hz Gate control board: 1771356 MC 005.01 080730 Inverter: LENZE 8200 vector E82EV152_2C900 used, tested ! Dimensions: 600 x 250 x 630 mm

Radio interference suppression filter, mains filter LENZE type LD E82ZZ55234B210 00450969 3x 500 V 3x 16.8 A 50 - 60 Hz unused ! Dimensions: 340 x 100 x 70 mm

Three-phase electric motor with inverter LENZE MDEMAXX112-22 4,0 /4,8 / kW 1435 / 1735 / 2545 rpm 400 / 480 / 400 V 3AC, 50 / 60 / 87 HZ IP 54 Design: B35 Shaft diameter: Ø 28 mm Wavelength: 60 mm Groove width: 8 mm Flange diameter: Ø 180 / 250 mm bolt circle diameter: Ø 215 mm hole diameter: Ø 15 mm motor base: 175 x 230 mm hole spacing (parallel to shaft): 140 mm hole spacing ( transverse to shaft ): 190 mm hole diameter: Ø 11,5 mm Inverter: Type E82MV402_4B001 Input: 400 / 500 V 3AC, 50 / 60 Hz Output: 0 - 400 / 500 V, 3AC 0 - 650 Hz, 4.0 kW used, tested ! Dimensions: 460 x 260 x 390 mm

Machine control with control box MACRYL, A. WOLF MASCHINENBAU GmbH MB 100 Connected load: 2.0 kW Operating voltage: 220 V AC 50 Hz 1x LENZE 421 E 4 Type: 308597 ( speed controller ) 1 x SCHIELE - AHS 1,5 - 30 sec ( timer relay ) 3 x SCHIELE - DL4K-10 ( main contactor ) 3 x SCHIELE - HL4K-40E ( auxiliary contactor ) 3 x SCHIELE - HL4K-22E ( auxiliary contactor ) 1 x SONTHEIMER - N3/11Z/Z33 ( main switch ) Control box: RITTAL Type: AE 1380 380 x 200 x 380 mm with documents ! used, checked ! Dimensions: 460 x 430 x 200 mm

Three-phase electric motor LENZE AL90S/L-2 1.5 kW 2855 - 2880 rpm 220 - 230 / 380 - 415 V 3AC IP 55 shaft diameter: Ø 24 mm Flange diameter: Ø 200 mm used, tested ! Dimensions: 330 x 200 x 250 mm

Electric motor with adjustment disc HEW EEXF132M/60 4.8 kW 960 rpm 380 V 3AC shaft diameter: Ø 38 mm Adjustment disc: LENZE 11.213.25.991.500 diameter: Ø 70 / 250 mm internal width: 45 - 85 mm spare part for woodworking machine VENJAKOB VPG 1300x25 ! Retail sale possible, suitable 2nd adjustment disc - see S1937 ! used, tested ! Dimensions: 700 x 380 x 270 mm

Spring-applied brake LENZE BFK 458-08E 30513 3.5 NM 180 V DC 25 W Dimensions: Ø 105 x 50 mm

Technical details: RA1025 Manufacturer: Caljan Type: belt curve 60° CC 080 XBK 641 / 054 Year of construction: 2008 Angle: 60° Direction: Left Nominal radius: approx. 600 mm Width: 500 mm Conveyor speed: v = 17 m / min v = 0.28 m / sec Top height cheek: 860 mm + 200 adjustment Strap type: E12/2 UO/U6S GSTR C black Number: 1 x (article no. 20140027) Condition: Used / fully functional Color: Blue (RAL 5002) More information: incl. 2 supports Gear motor Manufacturer: Lenze Features: Construction year: 2008 condition: very good (used) Nominal / inner radius in mm: 600 Belt width in mm: 500 angle: 60° Driven: YES Running direction: LEFT Engine type: Lenze Getriebemotor Conveyor speed m / s: 0,28 scope of delivery: including supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir  ...

Gear motor LENZE Type: GKS04-3M SAR 090-11 ( GKS04-3MSAR090-11 ) 1,5 kW 242.1 rpm Engine: MDEMAXX 090-11 1.5 kW 2840 rpm 230 / 400 Volt 3AC 50 Hz IP 55 Hollow shaft diameter: Ø 25 mm Hollow shaft length: 145 mm holder for shrink disc: Shaft diameter: Ø 36 mm, shaft length: 24 mm Flange diameter: Ø 105 / 75 mm bolt circle diameter: Ø 88 mm 6x threaded hole: M6 x 1.0, depth: 15 mm used, tested ! Dimensions: 470 x 230 x 180 mm

Mecalux transfer roller conveyor slider 90° 1050-815-730 RA1914 Make: Mecalux Running direction: both directions Roller width (RB): 730 mm Nominal/outer width frame (NB): 745 mm Total width: 815 mm Length: 1050 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide: Lenze-Motor 3x 400V, 0,25 kW Motor Roller conveyors: 1x ITOH-Deki 16936/010 24V Height frame: 130 mm Currently set high: 745 mm Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/sr Optionally available: scope of delivery: supports and Light barrier Side guide oneand both sides Features: Construction year: 2017 condition: very good (used) angle: 90° nominal voltage: 24V, 400 Conveying length in mm: 1050 Nominal / outside width in mm: 745, 815 Roll width in mm: 730 Roll division in mm: 75 Driven: YES Engine type: Lenze Getriebemotor, ITOH-Deki 16936/010 24V Conveyor speed m / s:  ...

Producer: Baust Werkzeugtechnik Complete production line for rotary punching of sheet metal or plastic. Rotary die cutting machine / Rotary punching machine Including de-coiler and un-coiler. Year of production: 1999. Coilers equiped with Lenze 5.5 [kW] motors. Sheet processor drive power 4.6 [kW]. Material thickness range: 0.4 - 1.5 [mm]. Material Yield strenght: 350 [N/pmm]. Equiped with Lenze motors and drives and Siemens SPS S7 control. Power: 3 x 400 [V] 5%. Frequency: 50 [Hz]. Control voltage: 24 [V]. max. Fuse: 63 [A]. Working modes manual or automatic. Including complete original operating instructions in German and schematics. On stock ready for delivery, including packing and loading. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

Servo motor with reversing gear and speedometer, permanent magnet motor SIEMENS 1 HU 3132-0AC01-0ZZ9-Z ( 1HU3132-0AC01-0ZZ9-Z ) 1,8 kW 1000 rpm 167 V IP54 Reverse shuttle LENZE 12 204 25 1 2 1 Step jump: 2.0 shaft: Ø 60 mm used, tested ! Dimensions: 1070 x 360 x 360 mm

Side tensioner, quick release, tensioner, 4 pieces LENZKES FL10-17 12x screw M16 x 2.0, length: 30 mm 12x slot nut 28 / 18 mm 4x ball washer M16 used, tested ! Dimensions ( tensioner without screws ): 128 x 56 x 38 mm Dimensions ( packaging ): 210 x 130 x 60 mm

belt conveyor, belt conveyor, conveyor belt, belt conveyor PAGUS 1920 x 100 mm belt length: 1920 mm belt width: 2x 20 mm Conveying width: 100 mm Gearbox: LENZE SSN31-1FVAL i: 30 Engine: LENZE SSN31-1UVAL-056C21 0,09 kW 2700 rpm 230 / 400 V 3AC 50 Hz IP54 used, tested ! Dimensions: 2000 x 550 x 660 mm

Feed for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press -Round material feeding system: round steel feeding system with console -Feed: Lenze 2.2 kW drive type MDXMA2M 090-31 -Belt tension: pneumatic -Material tension: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic unit: can be included for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332kg

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Rapid, chassis drive motor faus electric stacker RVT 2500 -Drive motor::LS Leroy Somer type T15 24V 2.0 kW -Motor brake: Lenze -Individual components: see photos -Dimensions: 290/285/H700 mm -Weight: 76 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Jungheinrich, chassis drive motor for pedestrian stacker -Drive motor: July type GF106-G3 24V 2.0 kW -Motor brake: Lenze type JH27636600 -Wheel: type 230 x 78 -Individual components: see photos -Dimensions: 290/235/H630 mm -Weight: 73kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Conveyor belt: with automatic lifting and rotating device -Belt width: 2x 50 mm, length 2385 mm -Distance: 410 mm -Geared motor: Lenze 0.55 kW -Speed: 51-293 rpm -Belt speed: 11-65 m / min -Dimensions: 1265/815 / H740 mm -Weight: approx. 248 kg

Electric motor, three-phase motor, brake motor -Manufacturer: Lenze, electric motor with brake -Type: D 90 L4-BR -Power: 1.5 kW -Speed: 1420 rpm -Brake: 16 Nm -Shaft: Ø 24 x 45 mm -Construction: B3 -Dimensions: 380/245/H180 mm -Weight: 21 kg

Gear motor, electric motor, three-phase motor -Manufacturer gearbox Lenze type: 12.602.10.1.5 -Manufacturer motor HEW type: EEXF80L/4 -Speeds: 24 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 505/230/H170 mm -Weight: 23.3 kg/piece

Gear motor, electric motor -Manufacturer gear Lenze type: 52307 04 111 -Manufacturer Motor Bauknecht Type: RF0,37/4-7 -Speed: 94 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: Ø 19 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 390/220/H180 mm -Weight: 15 kg

Grinding lenght: 600mm Grinding width: 250mm Grinding height: 400mm Size of magnet: 600x250mm Dimension of grinding wheel: ?300 x 30mm Made in Germany Control:LENZE

SPIRO 6000V4 plasma cutting machine built in 2016 in Switzerland, performs ideally in medium and large industrial plants during the industrial production of parts made of steel sheets and non-ferrous metals. To ensure high cutting performance even during the most intensive machining, the extended work space based on a stable design allows simultaneous cutting and unloading of finished products without interrupting machine operation. The SPIRO CUTLASS 6000 plasma cutting machine is operated using the high-speed Spiro HS Controller with a complete library of parametric models and shapes. Technical specifications of the SPIRO 6000V4 plasma cutting machine - work table area (L x W): 6000 x 1500 mm - maximum workpiece thickness (galvanised steel): 6 mm - maximum workpiece thickness (black steel): 6 mm - maximum workpiece thickness (stainless steel): 6 mm - maximum workpiece thickness  ...

Used Depalletizer Packr 2003 Manufacturer Packr Model AF611 Year 2003 Speed b h 600 Worked formats 20L cannivers Safety features Yes Manuals available Yes Maintenance documentation Yes State of machine In production Type of movement Rotating arm X Y Supported Pallet Dimensions 1200 1200 Top cover Yes PLC type Siemens range 300 Spare parts available very limited Work hours unknown Notes Production fully operational The Lenze drives are obsolete and in case of brakedown new servo system needs to be installed Covers are automatically discharged and stapled Empty pallets are stacked [...for more information send your inquiry to the seller.] refno: DEPAL30

VARGA FLEXO 800 Type HK68,, C.I. flexo printing,geared, 6 colors, working width 800 mm., Printable materials:, - Pre-treated plastics (PET, PE, BOPP), - Multilayer films, - Paper, - Lenze servomotors installed in machine- main drive, unwinding, winding, - pressure cylinder: central impression, - CI pressure cylinder material: ST52–3, - number of printing stations: 6 pcs, - printing length: 30–55 cm, - print length scale: 1 cm, - printing accuracy at constant speed ± 0.2 mm, - length register setting: manual, - cross register setting: manual, - maximum print width: 800 mm, - Maximum roll width: 900 mm, - Unwinder: 1 pc, - core diameter : 76 mm, - Maximum diameter of reels: 1000 mm, - mechanical speed: 15–120 m / min, - Machine weight: 7 tons, Equipment:, - Automatic, two-way winding and rewinding system that maintains a constant tensile force after setting the material parameters.  ...

GND(Turkish) 6 meter CNC Tube Bending Machine Maximum bending length : 6 meter Servo control(Brand Lenze made in Germany) Some tools are included CNC Control Number of axis : 6 38 mm diameter Machine is like new condition

General SKU355S835 LocationBarneveld MakeVomatec BV (NL) TypePilot plant 19.096 No.0211-025-19096 Mach.No.0211-025-19096 Main Features MaterialStainless steel Motor2.2 KW Specified Features - Processing vessel MaterialStainless steel 1.4404 (316L) Processing vessels Capacity80 Motor2.2 Information Year of construction1996 / 2002 Weight2000 Kg CEcheck Floor space3.3x1.5 M Total height2.05 M Extra Specificationsthis skid contains a Vomatec BV tank of 80 ltr with heating jacket, a worm pump brand van Wijk en Boerma, 0.14 m3/h, a Vomatec BV heat exchanger 0.25 m2 heated surface. 2 buffer tanks under which 3 pumps are mounted. 1 Lenze screw pump, 1 Speck pump VH0040-41-10-000, 1 Lenze rotary lobe pump 8F4-981H, 1 Vomatec scraped heat exchanger, 1 Bran Luebbe dosing pump type N-P31, 1 small vessel of which the agitator is missing. and electrical control of the whole. : P ...

The machine is BHS UV Flexo machine from 2006 with 8 print stations and a hot oil heated dryer after unit #8. The winders are mono winders with 150mm shafts and outfitted with roll lifts. UV lamps and inert system are from Noelle and are installed in all units. Register system is a Wiedeg system. Drive system is Lenze.

Robotized cell for 3D laser cutting 3D laser cutting cell, powered by a TRUMPF LASER TRUDISC 2000 (FD24) source. The line includes: ROBOT FANUC R-2000iB 165 F year. 2007.XII. + CABINET + TEACH PENDANT HEAD FOR LASER CUTTING PRECITEC LD 30C D50 YR30 LENZE MCM09C30 -RS0F1 SYNCHRONOUS SERVO DRIVE 2 PCS ROTARY TABLE EXPERT-TUNKERS TYPE ED920 / 1655/2 POWER SOURCE TRUMPF LASER TRUDISC 2000 (FD24) SICK SAFETY CURTAINS INSTALLED ALBANY DOOR HIGH-SPEED DOOR SYSTEM MP300 CONTROL PANEL SIEMENS SIMATIC MULTI PANEL + SOFTWARE CONTROL CABINET FIBER OPT CUTTING CELL (external 3.4 x 5.2 m, height 2.9) Additionally, we include full cabling necessary for the operation of the 3D cell. If you have any questions, we remain at your disposal

Bridge rectifiers, rectifiers LENZE 14.630.13.004 voltage: max. 3270 V AC current: max. 1 A New ! Dimensions ( rectifier ): 52 x 26 x 18 mm Dimensions ( package ): 56 x 37 x 22 mm

Spring-applied brake LENZE 14.449.06.010 shaft diameter: Ø 24 mm outer diameter: 85 mm height: 40 mm operating voltage: 190 V DC 20 Watt connection cable: approx. 0.4 m New ! dimensions (packaging): 90 x 90 x 45 mm