lathes emco used for sale

Drilling and parting lathe make WEIPERT type WPBA 710Machine -No: 16717 built in 1961Technical specifications:Distance between centers: 2500 mmCenter height over flat track: 710 mmTurning diameter over bed: 730 mmBed width: 580 mmSpindle bore: 230 mm16 spindle speeds: 14 - 450 rpm.Drilling depth: 1200 - 5700 mmDrive power: 25 HPused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Center lathe Geminis GE1000 Distance between centers: 3000 mm Turning diameter: -Over bed: 1000 mm -Over cross slide: 720 mm -In gap: 1240 mm Spindle bore: 104 mm Spindle speed: 13 - 1000 rpm Motor: 18,5 kW Year of manufacturing: 1997

Wheel lathe Rafamet UBB - 112 , one side of the machine isn't working

3 claw chuck 4 claw chuck dia 1100 mm 1 steady Distance between centers: 7000 mm Swing over bed: 1480 mm Swing over cross-slide: 1150 mm Swing in gap: 1800 mm Diametre of main spindle bore: 102 mm Power on main spindle: 22 kW Number of speeds: 8 > 400 rpm

Vertical lathe with self-loader Turning diameter 420 mm with 5-fold drilling unit siemens 840 Year of construction 2000

Ursus Ø 500 x 1000 mm Distance between centers: 1000 mm Swing over bed: 500 mm Swing over cross-slide: 220 mm Diametre of main spindle bore: 105 mm Power on main spindle: 12,5 HP Number of speeds: 23 > 1000 rpm

INDEX GSC 65 CNC Lathe YOM 1997, installed 1998 Turning diameter in chuck 250 mm Swing Ø above bed, max. 300 mm Turning length 400 mm Control: Index C 200-8 (Sinumerik 880) Axes X/Z/C Travel of Slides: Turret 1- X / Z travel 163 / 550 mm Turret 2- X / Z travel140 / 250 Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5000 rpm Feed range 0 - 15000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories & Spare parts -SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8). Changed monitor. -Hydraulic high-power chuck ROHM HS 200/3 -Tailstock -Turrets: 3 -Rotation tools in Turret 1- 2, in Turret 2- 3. -Milling spindle- tool in Turret 2 -Tool stations: 8 / 12 / 8 + 28 tools in magazine -Coolant device with chip conveyor. -A lot of spares and accessories

Ursus 300 Distance between centers: 1000 mm Swing over bed: 600 mm Swing over cross-slide: 380 mm Diametre of main spindle bore: 105 mm Power on main spindle: 15 HP Number of speeds: 30 > 1500 rpm

COLOMBO lathe, H points 800x1500, hydraulic tailstock, displayed.

Cross Support Universal G&-4974-M1768 VAT not statable!

Snb 400x1500p

Circulation diameter over bed ... 500mm Distance between stands ... 2000mm workpiece weight ... 600kg Circulation diameter via support ... 270mm Main engine power ... 5.5kW L x W x H ... 1100 x 3575mm Machine weight ... 1845kg complete general overhaul in 2022, CE certificate, new cover, Machine in good condition, possible to test under power.

KDA 200 Cone rotator Universal G&-4973-M1768

Type: S90/285-155 double chuck lathe! Distance between centers: 2000 mm Swing over bed: 830 mm Swing over cross-slide: 525 mm Diametre of main spindle bore: 155 mm Power on main spindle: 7,5 kW Number of speeds: 12 > 750 rpm Digital screen: yes Length: 3100 mm Width : 1000 mm Height: 1800 mm Weight: 3 ton

Type: RNC 5 Plus Mayfran chipconveyor Swing over bed: 600 mm Swing over cross-slide: 425 mm Distance centre tot centre: 1000 mm Spindle cone: A8 Dia of spindle bore: 96 mm Power on the spindle: 18,5 kW Number of speeds: 1 > 4000 rpm Command: GE Fanuc16-T ACCESORIES: yes Toolchanger: yes Number of tools: 12 VDI toolpositions

:::SPECIFICATIONS::: CNC Model: Fagor CNC Version: 8050 TC Spindle nose: ASA 11 Spindle power: 30Kw Bench drill height: 450mm Turning diameter on bench: 920mm Turning diameter on the undercarriage: 550mm Turning length: 3000mm Number of laps: 1500 Bar clearance: 130mm Mechanical gearbox: yes Number of ranges : 2 Weight between tips: 7800Kg Turret: Manual Number of Tool Turrets: 1 Number of fixed tool positions for the first turret: 1 First Turret X-Axis Travel: 550mm Tailstock: Yes Steerer stroke: 400mm Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 5350mm Width: 2650mm Height: 2000mm Weight: 7800Kg

Voest Alpine Weipert NC 500S heavy duty lathe hydraulic steady Sauter toolchanger with 12 positions VDI-tooling Driven tools + C-axis Heidenhain manual Plus 4110 (retrofitted) Swing over bed: 540 mm Swing over cross-slide: 450 mm Distance centre tot centre: 1000 mm Dia of spindle bore: 77 mm Power on the spindle: 35 kW Number of speeds: 11 > 4000 rpm Command: Heidenhain Manual Plus ACCESORIES: yes Toolchanger: yes Number of tools: 12 positions (driven)

Key data: 580 mm, 1000 mm, 400 mm

L + Z Lathe KNUTH 1000 A L + Z Lathe KNUTH Type 1000 A Masch. No. 118 255 Year of construction 1999 Center width 1000 mm max turning diameter over bed 400 mm Tip height above bed 200 mm max turning diameter over support 240 mm Turning diameter without bridge 580 mm Length of bridge: 52 mm Spindle bore 52 mm spindle cone: MK 6 Quill cone: MK 4 Spindle speed 30-1600 rpm. 12 steps Longitudinal feeds 0.04 – 1.06 mm Transverse feed 0.02 – 0.53 mm Tapping (30) 0.45 - 20 mm Tailstock quill 130 mm Power supply 400 volts, 50 Hz, 6.6 kW - 3-axis digital display position indicator - KNUTH, - Spindle speed over 15 gear stages - 3-jaw lathe chuck Ø 250 mm -4 Jaw chuck never used. new - Quick-change steel bracket Multifix size B with 3 inserts - Coolant tank with pump in the machine base - Spindle brake with foot pedal - Foldable chuck protection - Splash guard - Eme ...

We offer Lathe VDF with three-jaw chuck bed >100cm W:approx. 350cm 3000kg see photos The machine is used, fully functional. It is sold in the same condition as it is shown in the photos. specifications - Manufacturer: VDF Werkzeugmaschinen Hamburg - Bed > 100cm - Weight: approx. 3000 kg (customer info.) - Connection: 230V 50 Hz / 24V - Dimensions: estimated 3500 x 150 x 100 cm No further data is available. The machine is still in our customer's factory near Staßfurt. It is sold ex works EXW (forklift loading option available). Please only bid if you accept the terms and conditions of sale We sell the assets on behalf of our customers. The offer prices are to be understood as net prices in EURO ex works. The offers are subject to change, errors excepted and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also  ...

workpiece diameter ... 2600mm Table diameter ... 2400mm table load ... 12000kg workpiece height ... 1600mm Axis Z ... 1000mm Main engine power ... 80kW L x W x H ... 10400 x 5050 x 6730mm Machine weight ... 48000kg The machine is in good condition, possible to test under power.

SMT Lathe 80001350 The machine was designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick-up & placement unit between the shaft ends. - Rotate ring seat + flat rotate commutator + rotate commutator. - Ring mounting - Commutator side - Ring mounting - Drive wheel side The machine has several production programs to produce different parts. Each program uniquely corresponds to a wave type Specifications Anchor wavelength from up to 92.5 - 163.1 mm Bearing pin diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. Available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm R ...

Carousel lathe FKD 40 Face disc diameter 4000mm Turning diameter: 4400mm Turning height: 3000mm Stoessel cross-section: 300mm x 300mm X-axis: Travel ±2200mm Z-axis: Travel 2000mm W-axis: Travel 1200mm Speed of the face disc: 0 – 100 rpm, manual transmission Speed of the Fraeser: 0 – 3000 rpm, manual transmission C-axis in the flat disc table Control: Siemens PickUp Station: 5 places centric load: 35t

Key data: 820 mm, 2000 mm, 515 mm

We offer an exceptionally good precision lathe here. The machine is probably the best German lathe that has been built in this class. BOEHRINGER Precision Lathe Model DUE 800 Year of construction: 1984 Ma.-No.: 04041.01-807 Center height: 400 mm Circulation diameter over bed: 820 mm Circulation diameter via face slide: 515 mm Center width: approx. 2200 mm Effective turning length: approx. 2000 mm Bar clearance: 128 mm Spindle head DIN55022 size 11 Drive power: 30 kW Max. torque: 6300 Nm 24 speeds: 7.1 – 1400 rpm. 60 face feeds: 0.05 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Trustock quill stroke: 280 mm Tailstock taper: MK 6 Space requirement: LxWxH approx. 6700x2500x2250mm Weight: approx. 7500 kg Accessories: 3-axis digital display HEIDENHAIN coolant device; Chip protection rear wall, power chuck Autoblock 500 mm with clamping jaws ...

Parallel Lathe WEISSER HEILBRONN Between points: 1100 mm Maxi Ø on bench: 440 mm Maxi Ø over saddle: 230 mm Cone: CM4 Spindle diameter: Ø 45 mm Spindle speed: from 45 to 2000 RPM TRIPAN Turret 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1300 x 1500 mm Weight: approx 2 T

Lathe Böhringer VDF with programmable cycles Type DUS 560 Machine No. 1022.3073-03 Built in 1993 Center width 2000 mm Connected load 19 kW Working Range/Dimensions Circulation diameter over bed 570 mm Circulation diameter via face slide 365 mm Sliding distance of the face slide 345 mm Displacement of the upper support 125 mm Center height over flat track 280 mm Bed width 360 mm Bed carriage guide length 520 mm Slide width 225 mm Slide length 680 mm Upper support width 140 mm Turning bit cross-section according to DIN 770 hxw 32x25 mm Main spindle Spindle head according to DIN 55 027 size 8 Spindle diameter in front bearing diameter 100 mm Spindle bore diameter 62 mm Inner cone of the main spindle 70 metr. Main drive Infinitely variable three-phase motor (AC motor) Drive power 60 % / 100 % ED 19/15 kW Torque 60 % / 100 % ED 1800/1400 Nm Total speed range  ...

Key data: 460 mm, 400 mm, 460 mm

Control: Fanuc 32 iTB - Turning length: 400 mm - Turning diameter: 460 mm - Circulation diameter over carriage 460 mm - Tool holder directly - Tool turret with 12 positions Equipment - Rear chip conveyor with double chain - Electronic handwheel - High pressure coolant pump (6 bar 55l/min) - High pressure coolant pump (15 bar 55l/min) - 3- Jaws power chuck in main spindle - Hydraulic hollow clamping cylinder - Special gantry enclosure - GL6 – 2 axle CNC gantry loader with a Capacity of 2 x3 KG (Travel to the right side) - Electric 2x180° triple swivel gripper - Workstocker WS-280 x 400 x 14 - 14 individual pallets, each with 13 auto-centering support rods

workpiece diameter ... 2150mm Table diameter ... 2000mm maximum table load ... 12 000kg workpiece height ... 1500mm Axis Z ... 1300mm Average of the sanding piece... 250x250mm Pivot of the clamping plate ... 1-150 rpm Main engine power ... 75kW L x W x H ... 3600x4700x7200mm Machine weight ... 31350kg

This Traub TNS 26 DGY Lathe was manufactured in the year 1991. It is equipped with a Traub TX8F control unit. The machine has a spindle speed of 7000 rpm.

This MORI SEIKI CL-200 Lathe was manufactured in the year 1998 in Japan. It is equipped with a MORI SEIKI MSC-803 control unit. The machine has a spindle speed of 3500 rpm.

This TONGTAI TD-2500YBC Lathe was manufactured in 2019 in Taiwan. It is equipped with a FANUC Q1-TF control and has a spindle speed of 3500 rpm. The machine has 4 axes (X/Y/Z/B Axis Travel: 230/±51/600/630 mm) and can process a bar capacity of Ø64 mm. It is in a well-preserved condition with overall 7,600 operating hours.

This Mazak SQT-200 Lathe was manufactured in the year 1997 in the United of Kingdom. It is equipped with a Mazatrol T PLUS control unit. The machine has a Lathe chuck kitagawa 8” + 10” and disposes of a Mayfran chip conveyor.

This MORI SEIKI Frontier L1 Lathe was manufactured in the year 1996. It is equipped with a MORI SEIKI MSC 521 control unit. The machine is in good conditions.

This Okuma LB3000 EX II Lathe was manufactured in the year 2017 in Japan and has 7971 production hours, of which 3397 are cutting hours. It is equipped with an Okuma OSP-P300LA control unit. The machine has a spindle speed of 5000 rpm.

Mondial Celtic 14 Ø 370 x 750 mm Distance between centers: 750 mm Swing over bed: 370 mm Swing over cross-slide: 200 mm Diametre of main spindle bore: 35 mm Power on main spindle: 2,2 kW Number of speeds: 24 Length: 1900 mm Width : 730 mm Height: 1500 mm Weight: 815 kg

Cazeneuve HB725 Ø 725 x 1000 mm Distance between centers: 1000 mm Swing over bed: 725 mm Swing over cross-slide: 400 mm Diametre of main spindle bore: 81 mm Length: 2640 mm Width : 1270 mm Height: 1355 mm Weight: 2,7 ton

This DMG MORI CLX750 V4 Lathe was manufactured in the year 2021 and has 707 production hours, of which 175 are spindle hours. It is equipped with a DMG MORI SLIMline® Operate on SIEMENS multi-touch control unit. The machine has a spindle speed of 2000 rpm.